r: 02897311 p: 52.727 pid: 31699 b: WERA q: 0 st: lt: 12 ean: 4013288194831 sr: WERA 05073677001 sr_no_br: 05073677001 sr_no_br_cl: 05073677001 sr_cl: WERA05073677001 sr_dash: sold: 316.362 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Supplied in Bag Quantity per set 12 Product Range Wera Kraftform n: WERA Kraftform micro 12 Electronics 1 micro screwdriver set 12-piece - 05073677001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Wera Micro screwdriver set for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Includes practical rack for tidy storage of the screwdrivers. Kraftform Micro screwdriver for slotted, Phillips, TORX® BO, Hex, IPR and Microstix® screws plus ejector. Kraftform Micro handle for fast and ergonmic working The Wera Black Point tip offers an exact fit and optimum corrosion protection Kraftform Micro set in a robust pouch Take it easy tool finder: colour coding according to profile and size Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, Phillips, TORX® BO, TORX PLUS® IPR, Microstix® screws and hexagon headed bolts, screws and nuts. 1 remover. Content 12-piece set, in a belt pouch Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery Kraftform Micro 12 Electronics 1 Screwdriver set for electronic applications, 12 pieces 3x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 2x 2067 TORX® BO Screwdriver for tamper-proof TORX® screws for electronic applications: TX 8x60 mm, TX 10x60 mm 1x 2067 IPR TORX PLUS® Screwdriver for electronic applications: 1 IPR x 40 mm 2x 2035 Screwdriver for slotted screws for electronic applications: 0.35x2.5x40 mm, 0.23x1.5x40 mm 2x 2069 Nutdriver for electronic applications: 2.5x60 mm, 3x60 mm 1x 2072 Kraftform Micro screwdriver for Microstix® screws: m x 40 mm 1x 1429 Lifting fork: 1 x 3.5 x 50 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: micro screwdriver set 12-piece kpn: Kraftform micro 12 Electronics 1 kpn_dash: kpn_clear: Kraftformmicro12Electronics1 bkpn: WERA Kraftform micro 12 Electronics 1 bkpn_clear: WERA Kraftformmicro12Electronics1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05073677001 sr_ns: WERA05073677001
r: 02835963 p: 62.644 pid: 41707 b: WERA q: 0 st: lt: 12 ean: 4013288156167 sr: WERA 05074728001 sr_no_br: 05074728001 sr_no_br_cl: 05074728001 sr_cl: WERA05074728001 sr_dash: sold: 313.22 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4-8,8 Nm Max. tightening torque 8,8 Nm Product Range Wera Kraftform n: WERA 7463 Kraftform adjustable torque screwdriver with pistol grip and Rapidaptor quick-change holder 4.0 Nm x 4.0-8.8 Nm - 05074728001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with pistol handle Rapidaptor quick-release chuck Rapidaptor technology for rapid bit change Suitable for bits with 1/4" hex head drive Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 3.0 Nm, 4.0 Nm Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (3.0-8.8 Nm) and Rapidaptor quick-release chuck, pistol handle, 7463 x 4.0 Nm x 4.0-8.8 Nm kts: Kraftform adjustable torque screwdriver with pistol grip and Rapidaptor quick-change holder 4.0 Nm x 4.0-8.8 Nm kpn: 7463 kpn_dash: kpn_clear: 7463 bkpn: WERA 7463 bkpn_clear: WERA 7463 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074728001 sr_ns: WERA05074728001
r: 02835993 p: 97.851 pid: 41729 b: WERA q: 0 st: lt: 12 ean: 4013288179166 sr: WERA 05074782001 sr_no_br: 05074782001 sr_no_br_cl: 05074782001 sr_cl: WERA05074782001 sr_dash: sold: 293.553 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7431 ESD Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.30-1.00 Nm - 05074782001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7431 ESD x 0.30-1.00 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.30-1.00 Nm kpn: 7431 ESD kpn_dash: kpn_clear: 7431ESD bkpn: WERA 7431 ESD bkpn_clear: WERA 7431ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074782001 sr_ns: WERA05074782001
r: 08103765 p: 94.876 pid: 71582 b: WERA q: 0 st: lt: 9 ean: 4013288228338 sr: WERA 05075851001 sr_no_br: 05075851001 sr_no_br_cl: 05075851001 sr_cl: WERA05075851001 sr_dash: sold: 284.628 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Max. tightening torque 6 Nm Connection size (Handle) 1/4" Supplied in Case Quantity per set 16 Product Range Wera Kraftform n: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 tool set 16-piece - 05075851001 cn: TORQUE SCREWDRIVER SET cn2: TORQUE SCREWDRIVER SET cn_clear: TORQUESCREWDRIVERSET d: Product description 16-piece tool set. For professional screwdriving/professional fine adjustment AND for torque-controlled screwdriving. Secure slip-over torque mechanism with quick clockwise/counterclockwise setting and five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited loosening and tightening moments. Quick-release holder for high robustness. Suitable for bits with 1/4" external hexagon drive. 15 tough bits (89 mm length). Torque screwdriver with quick torque adjustment Easy and quick torque setting Fixed position (Torque Lock) for unlimited tightening and loosening moments Secure slip-over torque function for clockwise/anti-clockwise torque-control Quick and easy setting of the selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) 16-piece setFolding pouch with one 7515 torque screwdriver with easy quick torque setting and 15 tough bits (89 mm length) Features and benefits Torque screwdriver with quick torque adjustment Five selectable tightening torques (2.0; 3.0; 4.0; 5.0; 6.0 Nm) and one fixed position (Torque Lock) for unlimited tightening and loosening moments. Rapid setting of the selectable tightening torques. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Storage and transport in a robust and compact textile roll pouch, so the tool is always close at hand. The textile box features a fleece zone at the back. Using the provided self-adhesive hook and loop fastener strips, the textile box can be attached to the Wera 2go components. Or to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery 7515/16 Kraftform Safe-Torque Speed Universal 1, 16 pieces 1x 7515 Kraftform Safe-Torque Speed Torque screwdriver, 2-6 Nm: 1/4" x 2.0 Nm x 3.0 Nm x 4.0 Nm x 5.0 Nm x 6.0 Nm x 147.5 mm 1x 851/4 Z bits: PH 2 x 89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 5x 867/4 IP TORX PLUS® bits: 10 IPx89 mm, 15 IPx89 mm, 20 IPx89 mm, 25 IPx89 mm, 30 IPx89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm kts: tool set 16-piece kpn: 7515/16 Kraftform Safe-Torque Speed Universal 1 kpn_dash: 7515/16 Kraftform Safe kpn_clear: 751516KraftformSafeTorqueSpeedUniversal1 bkpn: WERA 7515/16 Kraftform Safe-Torque Speed Universal 1 bkpn_clear: WERA 751516KraftformSafeTorqueSpeedUniversal1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05075851001 sr_ns: WERA05075851001
r: 02834266 p: 70.082 pid: 41585 b: WERA q: 0 st: lt: 11 ean: 4013288179135 sr: WERA 05074774001 sr_no_br: 05074774001 sr_no_br_cl: 05074774001 sr_cl: WERA05074774001 sr_dash: sold: 280.328 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7432 Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm - 05074774001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value; audible click signal. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform torque screwdriver with Rapidaptor quick-release chuck Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Numerical torque value indicator Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Accuracy ±6 % (DIN EN ISO 6789). Numerical torque valuescale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Many screws - particularly in assembly and maintenance applications - have to be tightened with controlled torque to ensure the dependability of the screw connection and/or to avoid damage to the screw or work piece. Wera's adjustable torque screwdrivers are the ideal tool for this. They feature a torque range of 0.3 Nm to 8.8 Nm, two different handles, measurement accuracy of ± 6 % and Rapidaptor technology for rapid bit change. Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7432 x 0.90-1.50 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.90-1.50 Nm kpn: 7432 kpn_dash: kpn_clear: 7432 bkpn: WERA 7432 bkpn_clear: WERA 7432 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074774001 sr_ns: WERA05074774001
r: 03229751 p: 139.008 pid: 71807 b: WERA q: 0 st: lt: 12 ean: 4013288188311 sr: WERA 05074810010 sr_no_br: 05074810010 sr_no_br_cl: 05074810010 sr_cl: WERA05074810010 sr_dash: sold: 278.016 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,05 Nm ESD Yes Max. tightening torque 0,11 Nm With safety colour code 1000V No VDE approved No Adjustable torque range 0,05-0,11 Nm Bit holder type Internal hexagon Bit holder size 1/4 inch Product Range Wera Kraftform n: WERA 1461 ESD Kraftform Micro torque screwdriver with quick-change holder 0.05-0.11 Nm - 05074810010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description With a customised factory pre-set torque value. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque is reached. Repeatability is 100% guaranteed. Unlimited manual loosening torque. Electrical surface resistance<= 10 9 ohms for safe protection against electrostatic charge. Manufactured as per DIN EN 61340-5-1. Handle/interchangeable blades system for rapid blade changes. Kraftform Micro handle with rotating cap and free-turning zone for rapid turning, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones ensures the transmission of high tightening and loosening torques. Precision zone directly above the blade for the correct rotation angle for adjustment work. Rapid bit fixing: Simply push the bit into the holder for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove the bit. Free-running actuating sleeve for easy handling of the tool during the screwdriving process. Bits suitable for manual and machine operated screwdriving connections with electric screwdrivers (including HIOS, Delvo, Sehan). Use with e.g. smartphones, mobile phones, cameras, electronic devices, in dental laboratories and dental surgeries. Please note: 1 Ncm = 0.01 Nm. Customized pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for the take-up of bits with 4 mm halfmoon drive and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 10%. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery 1460 ESD Kraftform Micro torque screwdrivers with a customised factory pre-set measurement value with quick-release chuck, 1461 ESD x 0.05-0.11 Nm kts: Kraftform Micro torque screwdriver with quick-change holder 0.05-0.11 Nm kpn: 1461 ESD kpn_dash: kpn_clear: 1461ESD bkpn: WERA 1461 ESD bkpn_clear: WERA 1461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074810010 sr_ns: WERA05074810010
r: 02830466 p: 28.76 pid: 44590 b: WERA q: 0 st: lt: 16 ean: 4013288027887 sr: WERA 05006145001 sr_no_br: 05006145001 sr_no_br_cl: 05006145001 sr_cl: WERA05006145001 sr_dash: sold: 258.84 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 160 i/6 Rack screwdriver set Kraftform Plus Series 100 in holder 6-piece - 05006145001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver. Lasertip blade + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application For slotted and Phillips screws Content 6-pieces set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/6 Rack Screwdriver set Kraftform Plus Series 100 + Rack, 6 pieces 2x 162 i PH VDE Insulated screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus Series 100 in holder 6-piece kpn: 160 i/6 Rack kpn_dash: kpn_clear: 160i6Rack bkpn: WERA 160 i/6 Rack bkpn_clear: WERA 160i6Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006145001 sr_ns: WERA05006145001
r: 02830757 p: 31.239 pid: 42829 b: WERA q: 1 st: 1 lt: 1 ean: 4013288094704 sr: WERA 05320540001 sr_no_br: 05320540001 sr_no_br_cl: 05320540001 sr_cl: WERA05320540001 sr_dash: sold: 249.912 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 7 Product Range Wera Kraftform n: WERA 335/350/367/7 screwdriver set Kraftform Plus laser tip in holder 7-piece - 05320540001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. The Lasertip tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Screwdrivers for slotted, cross-recess Phillips and Pozidriv screws and TORX® Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted, cross, Phillips-Recess, Pozidriv and TORX® screws Content 7-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 335/350/367/7 Rack Screwdriver set Kraftform Plus Lasertip and rack, 7 pieces 1x 350 PH Screwdriver for Phillips screws: PH 2 x 100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 335 Screwdriver for slotted screws: 0.8 x 4 x 100 mm 3x 367 Screwdriver for TORX® screws: TX 15x80 mm, TX 20x100 mm, TX 25x100 mm kts: screwdriver set Kraftform Plus laser tip in holder 7-piece kpn: 335/350/367/7 kpn_dash: kpn_clear: 3353503677 bkpn: WERA 335/350/367/7 bkpn_clear: WERA 3353503677 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05320540001 sr_ns: WERA05320540001
r: 02836001 p: 123.801 pid: 42147 b: WERA q: 0 st: lt: 12 ean: 4013288179029 sr: WERA 05074788001 sr_no_br: 05074788001 sr_no_br_cl: 05074788001 sr_cl: WERA05074788001 sr_dash: sold: 247.602 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7436 ESD Kraftform adjustable torque screwdriver with quick-change holder 0.30-1.00 Nm - 05074788001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Adjustable Kraftform ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Hexagonal anti-roll feature against rolling away Suitable for bits with 4 mm halfmoon and 4 mm HIOS drive Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. Simple setting of the required torque by hand. Articles 1430 ESD and 1431 ESD, all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Wera's torque tools offer torque-controlled screw tightening so as to avoid damage to the screw or workpiece and to ensure the integrity of the screw connection. This makes work-intensive drilling-out of screws and unproductive downtimes a thing of the past. It is also important whenever repeat accuracy is required. They come with an ergonomic Kraftform handle and have a distinctly audible and perceptible click signal whenever the required torque value is reached. No time-consuming blade changes; instead of special blades, conventional bits conforming to C 6,3 and E 6,3 or even 1/4" sockets can be used. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-1.0 Nm), 7436 ESD x 0.30-1.00 Nm kts: Kraftform adjustable torque screwdriver with quick-change holder 0.30-1.00 Nm kpn: 7436 ESD kpn_dash: kpn_clear: 7436ESD bkpn: WERA 7436 ESD bkpn_clear: WERA 7436ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074788001 sr_ns: WERA05074788001
r: 02835959 p: 46.776 pid: 42057 b: WERA q: 0 st: lt: 11 ean: 4013288179203 sr: WERA 05074792001 sr_no_br: 05074792001 sr_no_br_cl: 05074792001 sr_cl: WERA05074792001 sr_dash: sold: 233.88 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm - 05074792001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 kpn_dash: kpn_clear: 7451 bkpn: WERA 7451 bkpn_clear: WERA 7451 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074792001 sr_ns: WERA05074792001
r: 02141364 p: 6.48 pid: 45741 b: WERA q: 3 st: 1 lt: 1 ean: 4013288031891 sr: WERA 05118006001 sr_no_br: 05118006001 sr_no_br_cl: 05118006001 sr_cl: WERA05118006001 sr_dash: sold: 233.28 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 60 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm - 05118006001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.40 x 2 x 60 mm kts: Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118006001 sr_ns: WERA05118006001
r: 02835141 p: 111.404 pid: 41605 b: WERA q: 0 st: lt: 12 ean: 4013288179463 sr: WERA 05074810001 sr_no_br: 05074810001 sr_no_br_cl: 05074810001 sr_cl: WERA05074810001 sr_dash: sold: 222.808 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,05 Nm Bit holder size 4 mm Bit holder type Halfmoon/HIOS ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,05-0,11 Nm Max. tightening torque 0,11 Nm Product Range Wera Kraftform n: WERA 1461 ESD Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.050 Nm - 05074810001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. Compact handle/interchangeable blades system for torque-controlled precision screwdriving. The Kraftform Micro ESD torque screwdriver is ideal for torque-controlled jobs on electrostatically sensitive components. Suitable for bits with a 4 mm Halfmoon drive (Wera series 9) and a 4 mm HIOS drive (Wera series 21). Tamper-proof. Clearly audible and tactile signal when the set torque is reached. Repeatability is 100% guaranteed. Unlimited manual loosening torque. Electrical surface resistance<= 10 9 ohms for safe protection against electrostatic charge. Manufactured as per DIN EN 61340-5-1. Handle/interchangeable blades system for rapid blade changes. Kraftform Micro handle with rotating cap and free-turning zone for rapid turning, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones ensures the transmission of high tightening and loosening torques. Precision zone directly above the blade for the correct rotation angle for adjustment work. Rapid bit fixing: Simply push the bit into the holder for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove the bit. Free-running actuating sleeve for easy handling of the tool during the screwdriving process. Bits suitable for manual and machine operated screwdriving connections with electric screwdrivers (including HIOS, Delvo, Sehan). Use with e.g. smartphones, mobile phones, cameras, electronic devices, in dental laboratories and dental surgeries. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform Micro ESD torque screwdriver with quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Distinct audible and perceivable excess load signal when the pre-set torque value is reached Suitable for the take-up of bits with 4 mm halfmoon drive and 4 mm HIOS drive Applications e.g. on smartphones, mobile phones, cameras, electronic equipment Application Suitable for bits with 4 mm Halfmoon drive (and Wera Serie 9) and 4 mm HIOS drive (and Wera Series 21) Design With quick-release chuck for rapid bit change Pre-set torque 0,035 Nm, 0,05 Nm Accuracy ± 10%. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform Micro with non-roll feature and rotating cap, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Features a combination bit holder for both bits with Halfmoon and bits with HIOS drive. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The fast-turning zone just below the rotating cap allows rapid spinning. ds: dsc: Scope of delivery 1460 ESD Kraftform Micro torque screwdrivers, with factory pre-set value (0.02-0.11 Nm) and quick-release chuck, 1461 ESD x 0.050 Nm kts: Kraftform Micro adjustable torque screwdriver standard setting (0.02-0.11 Nm) with quick change holder 0.050 Nm kpn: 1461 ESD kpn_dash: kpn_clear: 1461ESD bkpn: WERA 1461 ESD bkpn_clear: WERA 1461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074810001 sr_ns: WERA05074810001
r: 02829014 p: 11.528 pid: 31760 b: WERA q: 0 st: lt: 7 ean: 4013288169341 sr: WERA 05671385001 sr_no_br: 05671385001 sr_no_br_cl: 05671385001 sr_cl: WERA05671385001 sr_dash: sold: 219.032 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Accessory/Part type Case For Kraftform Kompakt (12 pieces) Product Range Wera Kraftform n: WERA 9454 folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm - 05671385001 cn: ACCESSORY/PART SCREWING cn2: ACCESSORY/PART SCREWING cn_clear: ACCESSORYPARTSCREWING d: Product description Robust pouch for 12 Kraftform Micro screwdrivers with strong Velcro closure, belt loop and hanging loop, empty. Pouch for Kraftform Micro screwdrivers Robust pouch with strong Velcro closure, belt loop and hanging loop Offers space for 12 Kraftform Micro screwdrivers Features and benefits ds: dsc: Scope of delivery 9454 Pouch for up to 12-piece sets Kraftform Micro screwdrivers, empty, 235 x 115 mm kts: folding case for Kraftform Micro screwdrivers, maximum 12 parts, empty, 235 x 115 mm kpn: 9454 kpn_dash: kpn_clear: 9454 bkpn: WERA 9454 bkpn_clear: WERA 9454 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Accessory/part screwing | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera accessory/part screwing | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05671385001 sr_ns: WERA05671385001
r: 41071080 p: 30.413 pid: 71781 b: WERA q: 0 st: lt: 11 ean: 4013288003140 sr: WERA 05105656001 sr_no_br: 05105656001 sr_no_br_cl: 05105656001 sr_cl: WERA05105656001 sr_dash: sold: 212.891 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 334/355/6 Rack screwdriver set Kraftform Plus laser tip in holder 6-piece - 05105656001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes practical rack for tidy storage of the screwdrivers. Screwdriver for slotted and Pozidriv screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Lasertip round blades and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Content 6-piece set and rack in display carton Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 334/355/6 Rack Screwdriver set Kraftform Plus Lasertip and rack, 6 pieces 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 3x 335 Screwdriver for slotted screws: 0.5x3x80 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus laser tip in holder 6-piece kpn: 334/355/6 Rack kpn_dash: kpn_clear: 3343556Rack bkpn: WERA 334/355/6 Rack bkpn_clear: WERA 3343556Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05105656001 sr_ns: WERA05105656001
r: 02835969 p: 67.603 pid: 43818 b: WERA q: 0 st: lt: 12 ean: 4013288102959 sr: WERA 05074721001 sr_no_br: 05074721001 sr_no_br_cl: 05074721001 sr_cl: WERA05074721001 sr_dash: sold: 202.809 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 25 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 25-55 in lbs Max. tightening torque 55 in lbs Product Range Wera Kraftform n: WERA 7467 Kraftform adjustable pistol grip torque screwdriver (2.05 - 55.0 in. lbs.) with Rapidaptor quick-change holder - 05074721001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with pistol handle Rapidaptor quick-release chuck Rapidaptor technology for rapid bit change Suitable for bits with 1/4" hex head drive Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 25.0 in. lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (25.0-55.0 in. lbs.) and Rapidaptor quick-release chuck, pistol handle, 7467 x 25 in. lbs. x 25-55 in. lbs. kts: Kraftform adjustable pistol grip torque screwdriver (2.05 - 55.0 in. lbs.) with Rapidaptor quick-change holder kpn: 7467 kpn_dash: kpn_clear: 7467 bkpn: WERA 7467 bkpn_clear: WERA 7467 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074721001 sr_ns: WERA05074721001
r: 02835721 p: 8.099 pid: 42037 b: WERA q: 0 st: lt: 9 ean: 4013288150196 sr: WERA 05345282001 sr_no_br: 05345282001 sr_no_br_cl: 05345282001 sr_cl: WERA05345282001 sr_dash: sold: 202.475 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Width across flats 1/4" With safety colour code 1000V ESD No Handle type Screwdriver handle Blade length 60 mm VDE approved No Product Range Wera Kraftform n: WERA 2069 kraftform micro cap screwdriver 1/4 x 60 mm - 05345282001 cn: NUT DRIVER cn2: NUT DRIVER cn_clear: NUTDRIVER d: Product description Premium Wera Micro insert wrench for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro nutsetter for hex head screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Anti-roll feature and rotating cap for rapid twisting E.g. for electricians, opticians, precision mechanics, jewellers or IT hardware fitters Application Hexagon headed bolts, screws and nuts Blade Round Design Chrome-plated Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (gray = external hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2069 Nutdriver for electronic applications, 1/4" x 60 mm kts: kraftform micro cap screwdriver 1/4 x 60 mm kpn: 2069 kpn_dash: kpn_clear: 2069 bkpn: WERA 2069 bkpn_clear: WERA 2069 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Nut driver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera nut driver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05345282001 sr_ns: WERA05345282001
r: 02835450 p: 7.44 pid: 41989 b: WERA q: 2 st: 1 lt: 1 ean: 4013288031877 sr: WERA 05118002001 sr_no_br: 05118002001 sr_no_br_cl: 05118002001 sr_cl: WERA05118002001 sr_dash: sold: 200.88 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 1,5 mm Blade length 40 mm Blade thickness 0,23 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm - 05118002001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.23 x 1.5 x 40 mm kts: Kraftform cutting screwdriver, 0.23 x 1.5 x 40 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118002001 sr_ns: WERA05118002001
r: 02830313 p: 6.3 pid: 44539 b: WERA q: 0 st: lt: 11 ean: 4013288100047 sr: WERA 05134002001 sr_no_br: 05134002001 sr_no_br_cl: 05134002001 sr_cl: WERA05134002001 sr_dash: sold: 195.3 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Length 190 mm Width 80 mm Height 80 mm For Screwdriver Color Black Depth 80 mm Product Range Wera Kraftform n: WERA 05134002001 holder for Kraftform Micro screwdrivers, 190 x 80 mm cn: TOOL HOLDER cn2: TOOL HOLDER cn_clear: TOOLHOLDER d: Product description Practical rack for tidy storage of the screwdrivers. Rack for Kraftform Micro screwdrivers Storage for Kraftform Micro screwdrivers Features and benefits ds: dsc: Scope of delivery Rack for Kraftform Micro screwdrivers, 190 x 80 mm kts: holder for Kraftform Micro screwdrivers, 190 x 80 mm kpn: 05134002001 kpn_dash: kpn_clear: 05134002001 bkpn: WERA 05134002001 bkpn_clear: WERA 05134002001 c_path: Home / Corporate and environmental facilities / Workshop furniture & tooling / Accessories and parts fixed and mobile furniture / Tool holder | Home / Our brands / Wera / Wera corporate and environmental facilities / Wera workshop furniture & tooling / Wera accessories and parts fixed and mobile furniture / Wera tool holder | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05134002001 sr_ns: WERA05134002001
r: 08121648 p: 96.198 pid: 167052 b: WERA q: 0 st: lt: 8 ean: 4013288232557 sr: WERA 05150106001 sr_no_br: 05150106001 sr_no_br_cl: 05150106001 sr_cl: WERA05150106001 sr_dash: sold: 192.396 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Mixed VDE approved No With safety colour code 1000V Product Range Wera Kraftform n: WERA 9715 screwdriver set Kraftform Micro set 1 in foam insert, 24 pieces - 05150106001 cn: SCREWDRIVER MODULE cn2: SCREWDRIVER MODULE cn_clear: SCREWDRIVERMODULE d: Product description Durable foam insert; two-coloured for quick identification of missing parts; suitable for the Tool Rebel roller cabinet. Equipped with 24 Kraftform Micro screwdrivers. Durable foam insert, each tool has its own place; two-coloured, missing tools will quickly be noticed High-quality, durable foam insert without chemical vapours Kraftform Micro screwdrivers Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting 24-piece Kraftform Micro screwdriver set in a two-coloured foam insert for the Tool Rebel roller cabinet. Width x height x depth: without tools 344 x 30 x 392 mm, with tools 344 x 38 x 392 mm. Features and benefits The tools sit securely in the foam thanks to precise contour cutouts, but are easy to remove. The carefully designed arrangement of the tools ensures space-saving storage and quick access to each tool. After removing the tool the light grey second foam becomes visible and therefore missing tools are quickly identified. Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 9715 Foam insert Kraftform Micro screwdriver set 1, 24 pieces 3x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 000x40 mm, PH 00x40 mm, PH 0x40 mm 5x 2067 TORX® HF Screwdriver with holding function for electronic applications: TX 5x40 mm, TX 6x40 mm, TX 7x60 mm, TX 8x60 mm, TX 10x60 mm 1x 2067 IPR TORX PLUS® Screwdriver for electronic applications: 1 IPR x 40 mm 1x 2072 Kraftform Micro screwdriver for Microstix® screws: m x 40 mm 5x 2054 Screwdriver for hexagon socket screws for electronic applications: 0.7x40 mm, 0.9x40 mm, 1.3x40 mm, 1.5x60 mm, 2x60 mm 6x 2035 Screwdriver for slotted screws for electronic applications: 0.23x1.5x40 mm, 0.35x2.5x40 mm, 0.30x1.8x60 mm, 0.40x2x60 mm, 0.40x2.5x80 mm, 0.50x3x80 mm 2x 2069 Nutdriver for electronic applications: 4x60 mm, 5.5x60 mm 1x 1429 Lifting fork: 1 x 3.5 x 50 mm 1x 9815 Foam insert Kraftform Micro screwdriver set 1, empty: 344 x 30 x 392 mm kts: screwdriver set Kraftform Micro set 1 in foam insert, 24 pieces kpn: 9715 kpn_dash: kpn_clear: 9715 bkpn: WERA 9715 bkpn_clear: WERA 9715 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver module | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver module | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05150106001 sr_ns: WERA05150106001
r: 02835929 p: 47.768 pid: 43805 b: WERA q: 0 st: lt: 10 ean: 4013288179395 sr: WERA 05074790001 sr_no_br: 05074790001 sr_no_br_cl: 05074790001 sr_cl: WERA05074790001 sr_dash: sold: 191.072 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7450 Kraftform torque screwdriver standard setting, handle, Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm - 05074790001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7450 x 0.1 Nm x 0.1-0.34 Nm kts: Kraftform torque screwdriver standard setting, handle, Rapidaptor quick-change holder 0.1 Nm x 0.1-0.34 Nm kpn: 7450 kpn_dash: kpn_clear: 7450 bkpn: WERA 7450 bkpn_clear: WERA 7450 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074790001 sr_ns: WERA05074790001
