r: 03204000 p: 109.421 pid: 155348 b: TEC7 q: 9 st: 1 lt: 1 ean: 5414195011751 sr: TEC7 602090000 sr_no_br: 602090000 sr_no_br_cl: 602090000 sr_cl: TEC7602090000 sr_dash: sold: 41908.243 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml Principal hazard property GHS05 Corrosive Relative density 1 ADR packing group ADR class Physical state Solid UN number Conseils de prudence (P) P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P310; P321 H-statements H315; H318 Hazard class GHS05 Corrosive Packaging Bag n: TEC7 WP7-501 Basement + Wall Waterproofing polymer cement coating (10kg + 1l) - 602090000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description POLYMER CEMENT COATING 100% waterproof Simple application Waterproof and salt-resistant from 2 mm Also on wet walls A hard but elastic coating for damp basement walls, basement floors and utility rooms Can be tiled, plastered and overpainted Can be applied by brush after mixing with water, with perfect adhesion to porous materials and fast curing Resistant to salts and water pressure on stable, receptive substrates Crack bridging ability and resistant to permanent immersion Prevention or strong reduction of salt efflorescence, waterproof but vapour permeable Instructions Remove as much old paint and loose plaster as possible Dilute sealant primer 1:1 with clean water and apply saturated with the spray pump on clean, receptive and stable substrates Mix the required amount of polymer cement for the first coat (1 kg per 1.2 m²) with pure water. Mixing ratio 400 ml water per kg Mix with a slow-running mixer (500 rpm) until a thick liquid, lump-free mass is obtained and allow to rest for 2 minutes. Stir again before use. The mixture is workable for 35 to 45 minutes, depending on the ambient temperature When stiffening up in the pot, never add water to respect the mixing ratio: so mix as much product as you can apply within the processing time at most Apply the first coat of +/- 1 mm with a broad, stiff brush on the still wet primer Allow to dry for 3 to 5 hours before applying the second layer (the first should feel hardened) Moisten the first layer with water using a sprayer and apply the second layer of +/- 1 mm at right angles to the direction of brushing the first layer Clean material and spilt product immediately with clean water. Can only be removed mechanically after curing Complete curing after 7 to 14 days, depending on temperature. Air humidity during this period: 50 to 80 %. Ensure ventilation to avoid condensation. Do not use a construction dryer or dehumidifier in the first month after application Can be repainted after curing with breathable paint Consumption: 1 10 kg bag for 6 m² (2 mm thick in 2 layers on a plain wall) ds: dsc: kts: Basement + Wall Waterproofing polymer cement coating (10kg + 1l) kpn: WP7-501 kpn_dash: WP7 kpn_clear: WP7501 bkpn: TEC7 WP7-501 bkpn_clear: TEC7 WP7501 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602090000 sr_ns: TEC7602090000
r: 03203998 p: 73.223 pid: 157064 b: TEC7 q: 0 st: lt: 5 ean: 5414195011706 sr: TEC7 602050000 sr_no_br: 602050000 sr_no_br_cl: 602050000 sr_cl: TEC7602050000 sr_dash: sold: 1025.122 p_range: none type: standard act: 1 avo: 1 av: Net volume 5 l UN number Relative density 0,83 ADR packing group Physical state Solid ADR class EUH-statements EUH208 Flash point 65 °C n: TEC7 WP7-401 Gevel Waterdicht impregnating agent for exterior walls (rectangular bucket 5l) - 602050000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description INVISIBLE IMPREGNATION FOR EXTERIOR WALLS Makes walls waterproof Lets walls breathe Energy-saving Dirt-repellent 1 coat = 25 years protection Easy to use: visible upon application and invisible after penetration Applicable on all porous mineral substrates and fully absorbed after 30 to 60 minutes Prevents rain penetration A dry façade means energy savings and less frost damage Prevents green deposits and moss growth on north-facing facades Reduces the adhesion of dirt, making façades easier to clean Strong reduction of salt efflorescence Instructions Apply to stable, clean, hand-dry and porous façade. Allow to dry for two days after cleaning and at least 7 days after repairing brickwork Apply undiluted in one thick layer with a coat roller or block brush Treat natural stone completely or cover to prevent staining Wood can also be treated, first test on a wood sample and allow to dry for 24 hours Remove spilt product immediately with a damp cloth and rinse with clean water Clean material with clean water Remove dried patches using Tec7 Cleaner Consumption +/- 30m² / 5L depending on surface varying between 20 and 40 m²/5L ds: dsc: kts: Gevel Waterdicht impregnating agent for exterior walls (rectangular bucket 5l) kpn: WP7-401 kpn_dash: WP7 kpn_clear: WP7401 bkpn: TEC7 WP7-401 bkpn_clear: TEC7 WP7401 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier sr_no_br_cl_ns: 602050000 sr_ns: TEC7602050000
r: 03204025 p: 90.867 pid: 155418 b: TEC7 q: 0 st: lt: 6 ean: 5414195011645 sr: TEC7 602470000 sr_no_br: 602470000 sr_no_br_cl: 602470000 sr_cl: TEC7602470000 sr_dash: sold: 181.734 p_range: none type: standard act: 1 avo: 1 av: Net volume 4 l Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing in bucket 4l - 602470000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces ( ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing in bucket 4l kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier sr_no_br_cl_ns: 602470000 sr_ns: TEC7602470000
r: 03204023 p: 10.24 pid: 156197 b: TEC7 q: 0 st: lt: 6 ean: 5414195011621 sr: TEC7 602450000 sr_no_br: 602450000 sr_no_br_cl: 602450000 sr_cl: TEC7602450000 sr_dash: sold: 122.88 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing (cartridge 310 ml) - 602450000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²) Reinforce with fibreglass mesh Apply with a brush or spatula, in one layer of at least 1 mm thickness Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing remove only mechanically A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free Test the adhesion on EPDM and plastics Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings Not suitable for permanent immersion Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing (cartridge 310 ml) kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602450000 sr_ns: TEC7602450000
r: 03204024 p: 20.619 pid: 156200 b: TEC7 q: 0 st: lt: 2 ean: 5414195011669 sr: TEC7 602460000 sr_no_br: 602460000 sr_no_br_cl: 602460000 sr_cl: TEC7602460000 sr_dash: sold: 82.476 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing (tin 750 ml) - 602460000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces ( ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing (tin 750 ml) kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier sr_no_br_cl_ns: 602460000 sr_ns: TEC7602460000
r: 03203989 p: 11.32 pid: 155415 b: TEC7 q: 0 st: lt: 19 ean: 5414195011553 sr: TEC7 602040000 sr_no_br: 602040000 sr_no_br_cl: 602040000 sr_cl: TEC7602040000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml Principal hazard property GHS02 Flammable ADR packing group ADR class 2 Physical state Aerosol UN number UN1950 Conseils de prudence (P) P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501 H-statements H222; H229; H304; H315; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard n: TEC7 WP7-201 Instant waterproof sealant (aerosol 500 ml) - 602040000 cn: MOISTURE BARRIER cn2: MOISTURE BARRIER cn_clear: MOISTUREBARRIER d: Product description IMMEDIATELY WATERPROOF - IMMEDIATELY PROTECTED For indoor and outdoor use Protection against water and rust Completely water- and windproof Instant Waterproof can be used everywhere for sealing, repairing and protecting all surfaces Forms an adhesive, elastic waterproof coating that protects against shock, stone chips and impact, and also reduces vibration and noise Sandable after curing and paintable Instructions Apply to clean and dry substrates. If necessary, clean with Tec7 Cleaner and/or Multiclean. Briefly sand smooth surfaces After releasing the mixing ball, shake the can well for 1 minute Apply first, thin layer from 25-40 cm. Then build up to a thickness of approx. 0.5 mm, respecting 10 minutes waiting time between coats After use, empty the cup with the can upside down Clean immediately with Tec7 Cleaner. Can only be removed mechanically after curing Paintable with most paints and lacquers after 90 minutes. Test the adhesion on plastics, powder paints, exotic woods and bituminous materials 1 aerosol 500 ml = +/- 1m² (+/- 0.5 mm layer thickness) ds: dsc: kts: Instant waterproof sealant (aerosol 500 ml) kpn: WP7-201 kpn_dash: WP7 kpn_clear: WP7201 bkpn: TEC7 WP7-201 bkpn_clear: TEC7 WP7201 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Moisture barrier | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 moisture barrier | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602040000 sr_ns: TEC7602040000
