r: 03204000 p: 96.198 pid: 155348 b: TEC7 q: 14 st: 1 lt: 1 ean: 5414195011751 sr: TEC7 602090000 sr_no_br: 602090000 sr_no_br_cl: 602090000 sr_cl: TEC7602090000 sr_dash: sold: 37324.824 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml Principal hazard property GHS07 Harmful or irritant Relative density 1 ADR packing group ADR class Physical state Solid UN number Conseils de prudence (P) P101; P102; P264; P280; P305 + P351 + P338; P337 + P313 H-statements H319 Hazard class GHS07 Harmful or irritant Packaging Bag n: TEC7 WP7-501 Basement + Wall Waterproofing polymer cement coating (10kg + 1l) - 602090000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description POLYMER CEMENT COATING 100% waterproof Simple application Waterproof and salt-resistant from 2 mm Also on wet walls A hard but elastic coating for damp basement walls, basement floors and utility rooms Can be tiled, plastered and overpainted Can be applied by brush after mixing with water, with perfect adhesion to porous materials and fast curing Resistant to salts and water pressure on stable, receptive substrates Crack bridging ability and resistant to permanent immersion Prevention or strong reduction of salt efflorescence, waterproof but vapour permeable Instructions Remove as much old paint and loose plaster as possible Dilute sealant primer 1:1 with clean water and apply saturated with the spray pump on clean, receptive and stable substrates Mix the required amount of polymer cement for the first coat (1 kg per 1.2 m²) with pure water. Mixing ratio 400 ml water per kg Mix with a slow-running mixer (500 rpm) until a thick liquid, lump-free mass is obtained and allow to rest for 2 minutes. Stir again before use. The mixture is workable for 35 to 45 minutes, depending on the ambient temperature When stiffening up in the pot, never add water to respect the mixing ratio: so mix as much product as you can apply within the processing time at most Apply the first coat of +/- 1 mm with a broad, stiff brush on the still wet primer Allow to dry for 3 to 5 hours before applying the second layer (the first should feel hardened) Moisten the first layer with water using a sprayer and apply the second layer of +/- 1 mm at right angles to the direction of brushing the first layer Clean material and spilt product immediately with clean water. Can only be removed mechanically after curing Complete curing after 7 to 14 days, depending on temperature. Air humidity during this period: 50 to 80 %. Ensure ventilation to avoid condensation. Do not use a construction dryer or dehumidifier in the first month after application Can be repainted after curing with breathable paint Consumption: 1 10 kg bag for 6 m² (2 mm thick in 2 layers on a plain wall) ds: dsc: kts: Basement + Wall Waterproofing polymer cement coating (10kg + 1l) kpn: WP7-501 kpn_dash: WP7 kpn_clear: WP7501 bkpn: TEC7 WP7-501 bkpn_clear: TEC7 WP7501 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602090000 sr_ns: TEC7602090000
r: 11993349 p: 44.958 pid: 155578 b: TEC7 q: 60 st: 1 lt: 1 ean: 5414195602508 sr: TEC7 602550000 sr_no_br: 602550000 sr_no_br_cl: 602550000 sr_cl: TEC7602550000 sr_dash: sold: 29986.986 p_range: none type: standard act: 1 avo: 1 av: Packaging Bucket Principal hazard property GHS07 Harmful or irritant Relative density 1,1 ADR packing group ADR class Flash point > 150 °C UN number Conseils de prudence (P) P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501 H-statements H315; H317; H319; H412 Hazard class GHS07 Harmful or irritant Physical state Solid n: TEC7 602550000 FLOOR FIX Heavy duty epoxy mortar (5kg bucket) - 602550000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description HEAVY DUTY EPOXY MORTAR Industrial trowelable 2-K epoxy mortar with full glass beads Stronger than concrete Extreme chemical and mechanical resistance Instructions Pour the hardener (the full bottle) into the epoxy mortar (bucket) Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min NEVER add water, cement or other products Apply to clean, dry and stable substrate Finish after curing: sanding, grinding, drilling, gluing, anchoring, nailing, . Clean tools with acetone At +15°C: working time after mixing: 30 min, walkable after 12 h, mechanically loadable after 24 h and chemical resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing ds: dsc: kts: Heavy duty epoxy mortar (5kg bucket) kpn: 602550000 FLOOR FIX kpn_dash: kpn_clear: 602550000FLOORFIX bkpn: TEC7 602550000 FLOOR FIX bkpn_clear: TEC7 602550000FLOORFIX c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 602550000 sr_ns: TEC7602550000
r: 02313642 p: 10.38 pid: 155173 b: TEC7 q: 17 st: 1 lt: 1 ean: 5414195070000 sr: TEC7 601075000 sr_no_br: 601075000 sr_no_br_cl: 601075000 sr_cl: TEC7601075000 sr_dash: sold: 1660.8 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Relative density 0,4 ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point 200 °C Packaging Jar n: TEC7 601075000 FILLER super-light repair and finishing putty (750 ml pot) - 601075000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description SUPER-LIGHT REPAIR AND FINISHING PUTTY Ready-to-use For indoor and outdoor use Long shelf life, even after frequent opening Easy to process Bright white, super-light elastic repair and finishing putty Ready-to-use for indoor and outdoor use Easy-to-apply paste Grain-free structure: easy to smoothen Super fine result limits sanding Excellent adhesion on all porous building materials Water-resistant and quickly paintable Covers shrinkage and expansion without cracking Long shelf life, even after frequent opening Instructions Apply filler on a dry, dust- and grease-free substrate, free from loose paint chips, putty, etc. To reinforce weak and/or friable substrates, a pre-treatment with Poxy Primer (fixative) is recommended ds: dsc: kts: super-light repair and finishing putty (750 ml pot) kpn: 601075000 FILLER kpn_dash: kpn_clear: 601075000FILLER bkpn: TEC7 601075000 FILLER bkpn_clear: TEC7 601075000FILLER c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 601075000 sr_ns: TEC7601075000
r: 11990034 p: 14.71 pid: 157133 b: TEC7 q: 18 st: 1 lt: 1 ean: 5414195210710 sr: TEC7 602510000 sr_no_br: 602510000 sr_no_br_cl: 602510000 sr_cl: TEC7602510000 sr_dash: sold: 1250.35 p_range: none type: standard act: 1 avo: 1 av: Packaging Bucket Principal hazard property GHS07 Harmful or irritant Relative density 1,1 ADR packing group ADR class Flash point > 150 °C UN number Conseils de prudence (P) P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501 H-statements H315; H317; H319; H412 Hazard class GHS07 Harmful or irritant Physical state Solid n: TEC7 602510000 FLOOR FIX Heavy duty epoxy mortar (1kg bucket) - 602510000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description HEAVY DUTY EPOXY MORTAR Industrial trowelable 2-K epoxy mortar with full glass beads Stronger than concrete Extreme chemical and mechanical resistance Instructions Pour the hardener (the full bottle) into the epoxy mortar (bucket) Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min NEVER add water, cement or other products Apply to clean, dry and stable substrate Finish after curing: sanding, grinding, drilling, gluing, anchoring, nailing, . Clean tools with acetone At +15°C: working time after mixing: 30 min, walkable after 12 h, mechanically loadable after 24 h and chemical resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing ds: dsc: kts: Heavy duty epoxy mortar (1kg bucket) kpn: 602510000 FLOOR FIX kpn_dash: kpn_clear: 602510000FLOORFIX bkpn: TEC7 602510000 FLOOR FIX bkpn_clear: TEC7 602510000FLOORFIX c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 602510000 sr_ns: TEC7602510000
r: 03203998 p: 77.19 pid: 157064 b: TEC7 q: 0 st: lt: 5 ean: 5414195011706 sr: TEC7 602050000 sr_no_br: 602050000 sr_no_br_cl: 602050000 sr_cl: TEC7602050000 sr_dash: sold: 1080.66 p_range: none type: standard act: 1 avo: 1 av: Net volume 5 l UN number Relative density 0,83 ADR packing group Physical state Solid ADR class EUH-statements EUH208 Flash point 65 °C n: TEC7 WP7-401 Gevel Waterdicht impregnating agent for exterior walls (rectangular bucket 5l) - 602050000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description INVISIBLE IMPREGNATION FOR EXTERIOR WALLS Makes walls waterproof Lets walls breathe Energy-saving Dirt-repellent 1 coat = 25 years protection Easy to use: visible upon application and invisible after penetration Applicable on all porous mineral substrates and fully absorbed after 30 to 60 minutes Prevents rain penetration A dry façade means energy savings and less frost damage Prevents green deposits and moss growth on north-facing facades Reduces the adhesion of dirt, making façades easier to clean Strong reduction of salt efflorescence Instructions Apply to stable, clean, hand-dry and porous façade. Allow to dry for two days after cleaning and at least 7 days after repairing brickwork Apply undiluted in one thick layer with a coat roller or block brush Treat natural stone completely or cover to prevent staining Wood can also be treated, first test on a wood sample and allow to dry for 24 hours Remove spilt product immediately with a damp cloth and rinse with clean water Clean material with clean water Remove dried patches using Tec7 Cleaner Consumption +/- 30m² / 5L depending on surface varying between 20 and 40 m²/5L ds: dsc: kts: Gevel Waterdicht impregnating agent for exterior walls (rectangular bucket 5l) kpn: WP7-401 kpn_dash: WP7 kpn_clear: WP7401 bkpn: TEC7 WP7-401 bkpn_clear: TEC7 WP7401 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing sr_no_br_cl_ns: 602050000 sr_ns: TEC7602050000
r: 02313684 p: 36.198 pid: 155939 b: TEC7 q: 0 st: lt: 8 ean: 5414195602805 sr: TEC7 602830000 sr_no_br: 602830000 sr_no_br_cl: 602830000 sr_cl: TEC7602830000 sr_dash: sold: 579.168 p_range: none type: standard act: 1 avo: 1 av: Flash point > 100 °C Physical state Solid Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H319; H411 Conseils de prudence (P) P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501 Principal hazard property GHS07 Harmful or irritant UN number UN3077 ADR class 9 ADR packing group III n: TEC7 602830000 WALL FIX lightweight epoxy mortar (3kg bucket) - 602830000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description LIGHTWEIGHT EPOXY MORTAR 2-K epoxy mortar with hollow glass beads Lightweight material for vertical repairs Workable after curing: drilling, milling, ... Instructions Pour the hardener (the entire bottle) into the epoxy mortar (bucket) Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min NEVER add water, cement or other products Apply to clean, dry and stable substrate For applications thicker than 4 cm, apply in several layers or formwork Finishing after curing: sanding, grinding, drilling, gluing, anchoring, nailing, etc. Clean tools with acetone At +15°C: working time after mixing: 30 min, mechanically loadable after 24 hours and chemically resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing ds: dsc: kts: lightweight epoxy mortar (3kg bucket) kpn: 602830000 WALL FIX kpn_dash: kpn_clear: 602830000WALLFIX bkpn: TEC7 602830000 WALL FIX bkpn_clear: TEC7 602830000WALLFIX c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound sr_no_br_cl_ns: 602830000 sr_ns: TEC7602830000
r: 02313637 p: 4.13 pid: 157017 b: TEC7 q: 13 st: 1 lt: 1 ean: 5414195020005 sr: TEC7 601025000 sr_no_br: 601025000 sr_no_br_cl: 601025000 sr_cl: TEC7601025000 sr_dash: sold: 470.82 p_range: none type: standard act: 1 avo: 1 av: Net volume 250 ml Relative density 0,4 ADR packing group ADR class UN number EUH-statements EUH208 Physical state Solid Flash point 200 °C Packaging Jar n: TEC7 601025000 FILLER super-light repair and finishing putty (250 ml pot) - 601025000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description SUPER LIGHT REPAIR AND FINISHING PUTTY Ready-to-use For indoor and outdoor use Long shelf life, even after frequent opening Easy to process Hay-white, super-light elastic repair and finishing putty Ready-to-use for indoor and outdoor use Easy-to-apply paste Grain-free structure: easy to smoothen Super fine result limits sanding Excellent adhesion on all porous building materials Water-resistant and quickly paintable Covers shrinkage and expansion without cracking Long shelf life, even after frequent opening Instructions Apply filler on a dry, dust- and grease-free substrate, free from loose paint chips, putty, etc. To reinforce weak and/or friable substrates, a pre-treatment with Poxy Primer (fixative) is recommended ds: dsc: kts: super-light repair and finishing putty (250 ml pot) kpn: 601025000 FILLER kpn_dash: kpn_clear: 601025000FILLER bkpn: TEC7 601025000 FILLER bkpn_clear: TEC7 601025000FILLER c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 601025000 sr_ns: TEC7601025000
r: 02313600 p: 4.23 pid: 154774 b: TEC7 q: 0 st: lt: 8 ean: 5414195100004 sr: TEC7 601106000 sr_no_br: 601106000 sr_no_br_cl: 601106000 sr_cl: TEC7601106000 sr_dash: sold: 406.08 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml Flash point 200 °C Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 601106000 FILLER super-light repair and finishing putty (300 ml cartridge) - 601106000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description SUPER-LIGHT REPAIR AND FINISHING PUTTY Ready-to-use For indoor and outdoor use Long shelf life, even after frequent opening Easy to process Bright white, super-light elastic repair and finishing putty Ready-to-use for indoor and outdoor use Easy-to-apply paste Grain-free structure: easy to smoothen Super fine result limits sanding Excellent adhesion on all porous building materials Water-resistant and quickly paintable Covers shrinkage and expansion without cracking Long shelf life, even after frequent opening Instructions Apply filler on a dry, dust- and grease-free substrate, free from loose paint chips, putty, etc. To reinforce weak and/or friable substrates, a pre-treatment with Poxy Primer (fixative) is recommended ds: dsc: kts: super-light repair and finishing putty (300 ml cartridge) kpn: 601106000 FILLER kpn_dash: kpn_clear: 601106000FILLER bkpn: TEC7 601106000 FILLER bkpn_clear: TEC7 601106000FILLER c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Filler sr_no_br_cl_ns: 601106000 sr_ns: TEC7601106000
r: 02313700 p: 12.355 pid: 155935 b: TEC7 q: 0 st: lt: 10 ean: 5414195602867 sr: TEC7 602806000 sr_no_br: 602806000 sr_no_br_cl: 602806000 sr_cl: TEC7602806000 sr_dash: sold: 296.52 p_range: none type: standard act: 1 avo: 1 av: Flash point > 100 °C Physical state Solid Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H319; H411 Conseils de prudence (P) P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501 Principal hazard property GHS07 Harmful or irritant UN number UN3077 ADR class 9 ADR packing group III n: TEC7 602806000 WALL FIX lightweight epoxy mortar (600g pot) - 602806000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description LIGHTWEIGHT EPOXY MORTAR 2-K epoxy mortar with hollow glass beads Lightweight material for vertical repairs Workable after curing: drilling, milling, ... Instructions Pour the hardener (the entire bottle) into the epoxy mortar (bucket) Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min NEVER add water, cement or other products Apply to clean, dry and stable substrate For applications thicker than 4 cm, apply in several layers or formwork Finish after curing: sanding, grinding, drilling, gluing, anchoring, nailing, etc. Clean tools with acetone At +15°C: working time after mixing: 30 min, mechanically loadable after 24 hours and chemically resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing ds: dsc: kts: lightweight epoxy mortar (600g pot) kpn: 602806000 WALL FIX kpn_dash: kpn_clear: 602806000WALLFIX bkpn: TEC7 602806000 WALL FIX bkpn_clear: TEC7 602806000WALLFIX c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound sr_no_br_cl_ns: 602806000 sr_ns: TEC7602806000
r: 03204025 p: 91.074 pid: 155418 b: TEC7 q: 0 st: lt: 6 ean: 5414195011645 sr: TEC7 602470000 sr_no_br: 602470000 sr_no_br_cl: 602470000 sr_cl: TEC7602470000 sr_dash: sold: 182.148 p_range: none type: standard act: 1 avo: 1 av: Net volume 4 l Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing in bucket 4l - 602470000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²) Reinforce with fibreglass mesh Apply with a brush or spatula, in one layer of at least 1 mm thickness Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing, remove only mechanically A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free Test the adhesion on EPDM and plastics Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings Not suitable for permanent immersion Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing in bucket 4l kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing sr_no_br_cl_ns: 602470000 sr_ns: TEC7602470000
r: 03204023 p: 10.24 pid: 156197 b: TEC7 q: 0 st: lt: 6 ean: 5414195011621 sr: TEC7 602450000 sr_no_br: 602450000 sr_no_br_cl: 602450000 sr_cl: TEC7602450000 sr_dash: sold: 122.88 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing (cartridge 310 ml) - 602450000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²) Reinforce with fibreglass mesh Apply with a brush or spatula, in one layer of at least 1 mm thickness Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing remove only mechanically A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free Test the adhesion on EPDM and plastics Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings Not suitable for permanent immersion Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing (cartridge 310 ml) kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602450000 sr_ns: TEC7602450000
r: 03204024 p: 22.479 pid: 156200 b: TEC7 q: 0 st: lt: 2 ean: 5414195011669 sr: TEC7 602460000 sr_no_br: 602460000 sr_no_br_cl: 602460000 sr_cl: TEC7602460000 sr_dash: sold: 89.916 p_range: none type: standard act: 1 avo: 1 av: Net volume 750 ml Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 WP7-101 Universal Roofproof liquid membrane for roof waterproofing (tin 750 ml) - 602460000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description LIQUID MEMBRANE Durable water and wind sealing, even in difficult places Good adhesion to EPDM, tiles, metal roof materials 100% waterproof and UV-stable from 1 mm layer thickness Permanently flexible and walkable This MS hybrid polymer is easy to spread and quickly hardens into a tight membrane with a very long lifetime, suitable for repair, finishing and renovation of medium-sized roofs Can be applied horizontally and vertically to most roofing and building materials Can also be applied on slightly damp substrates and is rainproof after 2 hours Free of solvents and toxic substances Instructions Apply to clean and stable substrate, which may be slightly moist Reinforce fragile or rusty surfaces with a coat of Poxy Primer Always reinforce weak spots, connections, seams and corners with glass fibre tape. Large surfaces (<4 m²) Reinforce with fibreglass mesh Apply with a brush or spatula, in one layer of at least 1 mm thickness Clean tools immediately with Tec7 Cleaner and your hands with Powerwipes. After curing, remove only mechanically A surplus can be stored for a short time provided the bag in the pot is sealed airtight and air-free Test the adhesion on EPDM and plastics Discolouration and/or loss of adhesion may occur on bituminous materials, but can be applied to roofing treated with slate chippings Not suitable for permanent immersion Consumption for 1 mm thickness: 1 litre/m². Consumption varies with substrate roughness ds: dsc: kts: Universal Roofproof liquid membrane for roof waterproofing (tin 750 ml) kpn: WP7-101 kpn_dash: WP7 kpn_clear: WP7101 bkpn: TEC7 WP7-101 bkpn_clear: TEC7 WP7101 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing sr_no_br_cl_ns: 602460000 sr_ns: TEC7602460000
r: 03203910 p: 52.851 pid: 157063 b: TEC7 q: 0 st: lt: 8 ean: 5414195050002 sr: TEC7 601005000 sr_no_br: 601005000 sr_no_br_cl: 601005000 sr_cl: TEC7601005000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 5 l Flash point 200 °C Physical state Solid EUH-statements EUH208 UN number ADR class ADR packing group n: TEC7 601005000 FILLER super-light repair and finishing putty (5l bucket) - 601005000 cn: FILLING COMPOUND cn2: FILLING COMPOUND cn_clear: FILLINGCOMPOUND d: Product description SUPER-LIGHT REPAIR AND FINISHING PUTTY Ready-to-use For indoor and outdoor use Long shelf life, even after frequent opening Easy to process Bright white, super-light elastic repair and finishing putty Ready-to-use for indoor and outdoor use Easy-to-apply paste Grain-free structure: easy to smoothen Super fine result limits sanding Excellent adhesion on all porous building materials Water-resistant and quickly paintable Covers shrinkage and expansion without cracking Long shelf life, even after frequent opening Instructions Apply filler on a dry, dust- and grease-free substrate, free from loose paint chips, putty, etc. To reinforce weak and/or friable substrates, a pre-treatment with Poxy Primer (fixative) is recommended ds: dsc: kts: super-light repair and finishing putty (5l bucket) kpn: 601005000 FILLER kpn_dash: kpn_clear: 601005000FILLER bkpn: TEC7 601005000 FILLER bkpn_clear: TEC7 601005000FILLER c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Filling compound | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 filling compound sr_no_br_cl_ns: 601005000 sr_ns: TEC7601005000
r: 03203989 p: 11.32 pid: 155415 b: TEC7 q: 0 st: lt: 19 ean: 5414195011553 sr: TEC7 602040000 sr_no_br: 602040000 sr_no_br_cl: 602040000 sr_cl: TEC7602040000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 500 ml Principal hazard property GHS02 Flammable ADR packing group ADR class 2 Physical state Aerosol UN number UN1950 Conseils de prudence (P) P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501 H-statements H222; H229; H304; H315; H336; H411 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard n: TEC7 WP7-201 Instant waterproof sealant (aerosol 500 ml) - 602040000 cn: DAMP-PROOFING cn2: DAMP-PROOFING cn_clear: DAMPPROOFING d: Product description IMMEDIATELY WATERPROOF - IMMEDIATELY PROTECTED For indoor and outdoor use Protection against water and rust Completely water- and windproof Instant Waterproof can be used everywhere for sealing, repairing and protecting all surfaces Forms an adhesive, elastic waterproof coating that protects against shock, stone chips and impact, and also reduces vibration and noise Sandable after curing and paintable Instructions Apply to clean and dry substrates. If necessary, clean with Tec7 Cleaner and/or Multiclean. Briefly sand smooth surfaces After releasing the mixing ball, shake the can well for 1 minute Apply first, thin layer from 25-40 cm. Then build up to a thickness of approx. 0.5 mm, respecting 10 minutes waiting time between coats After use, empty the cup with the can upside down Clean immediately with Tec7 Cleaner. Can only be removed mechanically after curing Paintable with most paints and lacquers after 90 minutes. Test the adhesion on plastics, powder paints, exotic woods and bituminous materials 1 aerosol 500 ml = +/- 1m² (+/- 0.5 mm layer thickness) ds: dsc: kts: Instant waterproof sealant (aerosol 500 ml) kpn: WP7-201 kpn_dash: WP7 kpn_clear: WP7201 bkpn: TEC7 WP7-201 bkpn_clear: TEC7 WP7201 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Damp-proofing | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 damp-proofing | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Moisture barrier sr_no_br_cl_ns: 602040000 sr_ns: TEC7602040000
r: 03203915 p: 7.35 pid: 156194 b: TEC7 q: 0 st: lt: 8 ean: 5414195901113 sr: TEC7 901112000 sr_no_br: 901112000 sr_no_br_cl: 901112000 sr_cl: TEC7901112000 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 400 ml EUH-statements EUH066 ADR packing group ADR class 2 UN number UN1950 Packaging Spray Principal hazard property GHS02 Flammable Conseils de prudence (P) P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501 H-statements H222; H229; H319; H336; H410 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Aerosol n: TEC7 901112000 Galvatech aerosol 400 ml cn: ZINC PAINT cn2: ZINC PAINT cn_clear: ZINCPAINT d: Product description ZINKSPRAY Cold galvanisation Quick-drying Metal spray with 95% pure zinc powder for cold galvanisation of all metals Fast-drying and waterproof after 10 minutes, can be overpainted after 12 h at room temperature Instructions First sanding if necessary After releasing the mixing ball, shake well before use Apply from ± 30cm on clean, dry and rust-free surface. 2 thin layers give the best result After use, empty the can upside down ds: dsc: kts: Galvatech aerosol 400 ml kpn: 901112000 kpn_dash: kpn_clear: 901112000 bkpn: TEC7 901112000 bkpn_clear: TEC7 901112000 c_path: Home / Technical and chemical products / Surface treatment and repair / Other surface treatment / Zinc paint | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 surface treatment and repair / Tec7 other surface treatment / Tec7 zinc paint | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Zinc paint sr_no_br_cl_ns: 901112000 sr_ns: TEC7901112000
