What is Tec7 Floor Fix used for?

It is a 2-component epoxy mortar for heavy-duty repairs on concrete floors, garages, ramps, steps, and industrial floors indoors and outdoors.

Do you need a primer before applying the mortar?

No, you can apply it directly onto a clean, dry, and stable substrate without an additional primer or base coat.

Can you add water or cement to the mixture?

No, never add water, cement, or other substances. Only mix the entire supplied hardener bottle into the mortar.

What is the working time after mixing?

At a temperature of 15 °C, the working time after mixing is 30 minutes.

When can the repaired surface be walked on and loaded?

At 15 °C, the surface is walkable after 12 hours and can handle mechanical loads after 24 hours.

TEC7 602550000 FLOOR FIX Heavy duty epoxy mortar (5kg bucket) - 602550000

Name: TEC7 602550000 FLOOR FIX Heavy duty epoxy mortar (5kg bucket) - 602550000
Brand: TEC7
SKU: 11993349
Price: 58.95 EUR
Availability: InStock
Rating: 10 (1 reviews)

Supplier number: TEC7 602550000 | EAN 5414195602508

1 review(s)

58.95 tax incl.

€48.72 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Ordered before 20:00 - delivered as of 03/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL
Delivered from Belgium

↓ Documents (2) ✆ Talk to a specialist

Heavy floor repairs with TEC7

Practical benefits

Stronger than standard concrete: You repair heavily trafficked industrial floors and ramps with confidence thanks to compressive strength that surpasses concrete.
Shrink-free feathered finishing: You trowel smooth transitions down to feather edge without cracking or losing structural integrity after curing.
High chemical resistance: Your workshop floor withstands oils, acids, and aggressive chemicals for long-lasting surface protection.

In a nutshell

The right choise for

With TEC7 Floor Fix, you repair heavily trafficked concrete floors, garages, steps, and industrial ramps with lasting strength. This 2-component epoxy mortar is three times stronger than concrete, easily handling heavy loads from forklifts and vehicular traffic. You apply it directly onto clean, dry substrates without requiring a primer, feathering edges down to zero with zero shrinkage. Its excellent chemical resistance protects against oils, acids, and salts to prevent further surface degradation. After blending in the supplied hardener, you have a 30-minute working time at 15 °C. The repaired surface is walkable after 12 hours and ready for mechanical loading after 24 hours.

Product information FAQ Reviews

€58.95

In stock - tax incl.

Key features according to our expert

Packaging: Bucket
Principal hazard property: GHS07 Harmful or irritant
Relative density: 1,1
ADR packing group: Not applicable
ADR class: Not applicable
Flash point: > 150 °C
UN number: Not applicable
P-statements: P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501
H-statements: H315; H317; H319; H412
Hazard class: GHS07 Harmful or irritant
Physical state: Solid

Product description

HEAVY DUTY EPOXY MORTAR

Industrial trowelable 2-K epoxy mortar with full glass beads
Stronger than concrete
Extreme chemical and mechanical resistance

Instructions

Pour the hardener (the full bottle) into the epoxy mortar (bucket)
Mix thoroughly until a homogeneous mass is obtained with a slowly rotating spindle for approx. 2 min
NEVER add water, cement or other products
Apply to clean, dry and stable substrate
Finish after curing: sanding, grinding, drilling, gluing, anchoring, nailing, .
Clean tools with acetone
At +15°C: working time after mixing: 30 min, walkable after 12 h, mechanically loadable after 24 h and chemical resistant after 7 days. High temperatures accelerate curing, low temperatures slow down curing

Precautionary statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P264: Wash ... (see safety data sheet) thoroughly after handling.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water/…
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H315: Causes skin irritation.
H317: May cause an allergic skin reaction.
H319: Causes serious eye irritation.
H412: Harmful to aquatic life with long lasting effects.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Packaging: Bucket
Principal hazard property: GHS07 Harmful or irritant
Relative density: 1,1
Adr packing group: Not applicable
Adr class: Not applicable
Flash point: > 150 °C
Un number: Not applicable
P-statements: P101; P102; P264; P280; P302 + P352; P305 + P351 + P338; P333 + P313; P337 + P313; P501
H-statements: H315; H317; H319; H412
Hazard class: GHS07 Harmful or irritant
Physical state: Solid

Brand TEC7
11993349
EAN 5414195602508
Supplier number TEC7 602550000

Frequently asked questions about this product

Answered by specialists

What is Tec7 Floor Fix used for?: It is a 2-component epoxy mortar for heavy-duty repairs on concrete floors, garages, ramps, steps, and industrial floors indoors and outdoors.
Do you need a primer before applying the mortar?: No, you can apply it directly onto a clean, dry, and stable substrate without an additional primer or base coat.
Can you add water or cement to the mixture?: No, never add water, cement, or other substances. Only mix the entire supplied hardener bottle into the mortar.
What is the working time after mixing?: At a temperature of 15 °C, the working time after mixing is 30 minutes.
When can the repaired surface be walked on and loaded?: At 15 °C, the surface is walkable after 12 hours and can handle mechanical loads after 24 hours.