Product Description:
- SureGrip Fused Test Probe and Test Lead set with built-in replaceable fuses for additional measurement protection.
- If the probe fuse does blow, these fused test probes will still allow the meter to indicate live voltage, helping to prevent a possible misreading of no voltage present.
- These modular probes ship with the Fluke TL224 silicone test leads.
- Rated to CAT III 1000 V, these probes have removable tip guards for reduced probe tip exposure.
Key features:
- Built in fuses for additional measurement protection, 1000 V, 11 A with 20 kA interrupt rating
- Fluke fuse part number 803293
- Probes allow indication of live voltage even with blown fuse*
- 2 mm threaded probe tips include removable 4 mm spring contacts and removable insulated caps for probing closely spaced leads
- TL224 leads are right angle connector on one end and straight connector on the other with reinforced strain reliefs, 1.5 meter silicone - insulated wire resists heat and cold
- Operating temperature - 20 °C to 50 °C (-5 °F to 120 °F)
- CAT III 1000 V, CAT IV 600 V, 10 A rating
- One year warranty
- *Voltage readings with blown fuse are approximate and vary with the meter impedance.
- Before and after each measurement, verify presence of blown fuse by checking continuity of the fused test probe.
- Current mode is non-functional with blown fuse.