r: 03226170 p: 5.83 pid: 4583 b: SOUDAL q: 0 st: lt: 8 ean: 5411183099562 sr: SOUDAL 126611 sr_no_br: 126611 sr_no_br_cl: 126611 sr_cl: SOUDAL126611 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 5,6 m Material Acrylic Thickness 6-24 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 15/6-24 mm - 126611 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 15/6-24 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126611 sr_ns: SOUDAL126611
r: 03161801 p: 5.45 pid: 3618 b: SOUDAL q: 0 st: lt: 8 ean: 5411183039056 sr: SOUDAL 126616 sr_no_br: 126616 sr_no_br_cl: 126616 sr_cl: SOUDAL126616 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 8 m Material Acrylic Thickness 4-16 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 15/4-16 mm - 126616 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 15/4-16 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126616 sr_ns: SOUDAL126616
r: 03226134 p: 4.84 pid: 4578 b: SOUDAL q: 0 st: lt: 6 ean: 5411183039032 sr: SOUDAL 126614 sr_no_br: 126614 sr_no_br_cl: 126614 sr_cl: SOUDAL126614 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 15 mm Roll length 12,5 m Thickness 2-8 mm n: SOUDAL Soudaband Acryl 300 self-adhesive pre-compressed jointing tape 15/2-8 mm - 126614 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Non-standardised impregnated, pre-compressed foam tape for sealing joints and connections on the inside or as a backfill for exterior use. Ideal for installation of exterior joinery behind impact, if further sealed with e.g. Soudaseal 215 LM. Properties: Acoustic and thermal insulator Dustproof Windproof Vapour-permeable Meets requirements according to DIN4108 (EnEv) and RAL assembly recommendations Easy to apply Self-adhesive on one side (= mounting aid) Causes no contamination of the joint edges Neutral and odourless Permanently elastic and paintable. Applications: As a joint finish in masonry, between precast elements and concrete walls. Soudaband Acryl 300 can also be used as secondary sealing of the joint between window frames and wall. Must be covered afterwards, e.g. with Soudaseal 215LM. Instructions for use: Soudaband Acryl 300 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint width, select the corresponding tape size. The joint sides should be parallel and free of construction dirt and/or cement residue. When unrolling Souda tape, take at least 1 cm extra. In the case of vertical joints, start at the bottom by placing the Soudaband. Fix the swelling tape by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell, causing it to press against the joint flanks, thus filling the joint, with any unevenness. When buttressing two Soudaband ends, it is important that they are flush on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: self-adhesive pre-compressed jointing tape 15/2-8 mm kpn: Soudaband Acryl 300 kpn_dash: kpn_clear: SoudabandAcryl300 bkpn: SOUDAL Soudaband Acryl 300 bkpn_clear: SOUDAL SoudabandAcryl300 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 126614 sr_ns: SOUDAL126614
r: 02907618 p: 4.1 pid: 3629 b: TESA q: 0 st: lt: 8 ean: 4042448495648 sr: TESA 60630-00001-00 sr_no_br: 60630-00001-00 sr_no_br_cl: 606300000100 sr_cl: TESA606300000100 sr_dash: TESA 60630 sold: 0 p_range: none type: standard act: 1 avo: av: Width 38 mm Roll length 50 m Thickness 30 µm n: TESA 60630 flexible aluminium tape 38mm x 50m - 60630-00001-00 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Tesa 60630 is a conformable aluminum tape based on a 30 µm (1.2 mil) aluminum foil, a transparent acrylic adhesive Features: Conformable to curved surfaces Easy to unwind Suitable for permanent applications Barrier against moisture, gases and vapors Electrically and thermally conductive Aging resistant Heat and light reflective Flame retardant according to DIN 4102, class B1 Flame retardant according to the requirements in UL 510A Main applications: Mounting of refrigerator coils in appliance industry Joining and sealing of thermal insulation and ducts To make substrates electrically and thermally conductive To reflect heat radiation ds: dsc: kts: flexible aluminium tape 38mm x 50m kpn: 60630 kpn_dash: kpn_clear: 60630 bkpn: TESA 60630 bkpn_clear: TESA 60630 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Tesa / Tesa technical and chemical products / Tesa adhesives and sealants / Tesa seals / Tesa seals on length / Tesa sealing tape sr_no_br_cl_ns: 606300000100 sr_ns: TESA60630-00001-00
r: 08085288 p: 3.45 pid: 105685 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179875 sr: SOUDAL 157807 sr_no_br: 157807 sr_no_br_cl: 157807 sr_cl: SOUDAL157807 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 30 mm Roll length 3 m Thickness 13-24 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/13-24 - 157807 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/13-24 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157807 sr_ns: SOUDAL157807
r: 08085287 p: 3.45 pid: 105313 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180116 sr: SOUDAL 157827 sr_no_br: 157827 sr_no_br_cl: 157827 sr_cl: SOUDAL157827 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 25 mm Roll length 3 m Thickness 13-24 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/13-24 - 157827 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/13-24 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157827 sr_ns: SOUDAL157827
r: 08085286 p: 2.583 pid: 106271 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179851 sr: SOUDAL 157809 sr_no_br: 157809 sr_no_br_cl: 157809 sr_cl: SOUDAL157809 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 25 mm Roll length 4 m Thickness 20-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/10-20 - 157809 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157809 sr_ns: SOUDAL157809
r: 08085285 p: 2.583 pid: 105312 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180024 sr: SOUDAL 157828 sr_no_br: 157828 sr_no_br_cl: 157828 sr_cl: SOUDAL157828 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 25 mm Roll length 4 m Thickness 10-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 25/10-20 - 157828 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 25/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157828 sr_ns: SOUDAL157828
r: 08085275 p: 1.974 pid: 107041 b: SOUDAL q: 0 st: lt: 6 ean: 5411183180109 sr: SOUDAL 157829 sr_no_br: 157829 sr_no_br_cl: 157829 sr_cl: SOUDAL157829 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 4 m Thickness 10-20 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/10-20 - 157829 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/10-20 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157829 sr_ns: SOUDAL157829
r: 08085283 p: 1.568 pid: 105682 b: SOUDAL q: 0 st: lt: 8 ean: 5411183180086 sr: SOUDAL 157830 sr_no_br: 157830 sr_no_br_cl: 157830 sr_cl: SOUDAL157830 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/8-15 - 157830 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157830 sr_ns: SOUDAL157830
r: 08085284 p: 1.568 pid: 107045 b: SOUDAL q: 0 st: lt: 8 ean: 5411183179912 sr: SOUDAL 157811 sr_no_br: 157811 sr_no_br_cl: 157811 sr_cl: SOUDAL157811 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Width 20 mm Roll length 5 m Thickness 8-15 mm n: SOUDAL Soudaband PRO BG1 sealing tape 20/8-15 - 157811 cn: SEALING TAPE cn2: SEALING TAPE cn_clear: SEALINGTAPE d: Product description: Standardised, pre-compressed jointing tape for sealing facade joints. Conforms to class BG1 according to DIN18542:2009. Impact rainproof to at least 600 Pa, suitable for uncovered joints (UV-resistant). Ideal as impact rainproof sealing of joints and connections in high-rise and low-rise buildings, in sill connections or as a high-quality backfilling for installation behind impact. Product features ATG (production control) and Socotec specifications. Properties: BG1 according to DI 18542/2009 Up to 600 Pa wind and driving rain proof Vapour-permeable Acoustic and thermal insulator Adapts to unevenness and joint movement UV-resistant Dustproof Self-adhesive on one side (= mounting aid) Permanently elastic and paintable Meets requirements according to DIN4108 (EnEv) and RAL mounting recommendations Applications: Ideally suited for vapour open, driving rainproof and permanently elastic seals and seals that need to comply with the 'EPB requirements' ('Energy Performance and Indoor Climate') and the requirements of EnEV DIN 4108 regarding airtightness. Sealing of expansion and movement joints between window frame and wall up to 100 metres building height as well as joints between door and window frames and wall, in concrete and steel construction, timber construction,... Instructions for use: Soudaband Pro BG 1 is easy to apply without special tools. The use of a spatula, knife or scissors and possibly wooden wedges is sufficient. After determining the joint depth and width, select the corresponding tape size. The joint edges should be parallel and free of building debris and/or cement residue. When measuring Soudaband Pro BG 1, take at least 1 cm extra per running metre of joint. In the case of vertical joints, start at the bottom by placing the Soudaband Pro BG 1. Fix the swelling band by pressing the self-adhesive side against a joint side using a putty knife. After application, the pre-compressed band will swell so that it will press against the joint flanks, thus filling the joint, with any unevenness. When butt-jointing two Soudaband Pro BG 1 ends, it is important that they are level on the visible side and that the two ends are firmly connected. Make sure there is an overlength per band and do not stretch it when installing. ds: dsc: kts: sealing tape 20/8-15 kpn: Soudaband PRO BG1 kpn_dash: kpn_clear: SoudabandPROBG1 bkpn: SOUDAL Soudaband PRO BG1 bkpn_clear: SOUDAL SoudabandPROBG1 c_path: Home / Technical and chemical products / Adhesives and sealants / Seals / Seals on length / Sealing tape | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal seals / Soudal seals on length / Soudal sealing tape sr_no_br_cl_ns: 157811 sr_ns: SOUDAL157811