r: 41071098 p: 35.371 pid: 71145 b: WERA q: 0 st: lt: 13 ean: 4013288093370 sr: WERA 05027934001 sr_no_br: 05027934001 sr_no_br_cl: 05027934001 sr_cl: WERA05027934001 sr_dash: sold: 106.113 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Drive size T10 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 2 Nm Max. tightening torque 2 Nm n: WERA 300 TX torque indicator TORX, TX 10 x 2.0 Nm - 05027934001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 10 x 2.0 Nm kts: torque indicator TORX, TX 10 x 2.0 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027934001 sr_ns: WERA05027934001
r: 02835991 p: 105.95 pid: 41722 b: WERA q: 0 st: lt: 12 ean: 4013288179159 sr: WERA 05074780001 sr_no_br: 05074780001 sr_no_br_cl: 05074780001 sr_cl: WERA05074780001 sr_dash: sold: 105.95 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,1 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,1-0,34 Nm Max. tightening torque 0,34 Nm Product Range Wera Kraftform n: WERA 7430 ESD Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.10-0.34 Nm - 05074780001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Dependable protection against electrostatic energy and associated damage. Variable torque setting option with highest precision. Simple adjustment of the required torque value without any special tools. Easy-to-read scale value. Rapidaptor quick-release technology for rapid bit change. Unlimited torque to loosen seized screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Adjustable Kraftform ESD torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform handle for fast and low-fatigue working Hexagonal anti-roll feature against rolling away Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173 C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology, non-magnetic Accuracy ±6 % (DIN EN ISO 6789). Numerical torque value scale. Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera's adjustable torque screwdrivers allow variable torque settings with maximum precision and ensure that the user gets the very best results in the familiar Wera design with superior ergonomics. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. Simple setting of the required torque by hand. Easy-to-read scale value. Articles 7430, 7431 and 7432 all come with a magnifying glass. This can be easily attached on to the scale, dramatically improving visibility. Measurement accuracy is ± 6 % (article 1430: ± 10 %) in accordance with the standard DIN EN ISO 6789. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. ds: dsc: Scope of delivery Series 7400 ESD Kraftform adjustable torque screwdrivers (0.1-3.0 Nm) with Rapidaptor quick-release chuck, 7430 ESD x 0.10-0.34 Nm kts: Kraftform adjustable torque screwdriver with Rapidaptor quick-change holder 0.10-0.34 Nm kpn: 7430 ESD kpn_dash: kpn_clear: 7430ESD bkpn: WERA 7430 ESD bkpn_clear: WERA 7430ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074780001 sr_ns: WERA05074780001
r: 02012166 p: 52.727 pid: 42382 b: WERA q: 0 st: lt: 10 ean: 4013288099143 sr: WERA 05027936001 sr_no_br: 05027936001 sr_no_br_cl: 05027936001 sr_cl: WERA05027936001 sr_dash: sold: 105.454 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size T20 Drive type Torx ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 300 TX torque indicator TORX with pistol grip, TX 20 x 5.0 Nm - 05027936001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform pistol handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform pistol handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 5.0 Nm (3.7 ft. lb.), fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 8 mm, reduced diameter tip Design Black Point Handle Kraftform pistol grip, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Non-adjustable and tamperproof. Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Multi-component Kraftform pistol handle for fast and ergonomic screwdriving ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, pistol handle, TX 20 x 5.0 Nm kts: torque indicator TORX with pistol grip, TX 20 x 5.0 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027936001 sr_ns: WERA05027936001
r: 02042909 p: 49.256 pid: 42808 b: WERA q: 0 st: lt: 10 ean: 4013288102911 sr: WERA 05074715001 sr_no_br: 05074715001 sr_no_br_cl: 05074715001 sr_cl: WERA05074715001 sr_dash: sold: 98.512 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm - 05074715001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.3-3.0 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7460 x 0.3 Nm x 0.3-1.2 Nm kts: Kraftform torque screwdriver with standard settings with Rapidaptor quick-change holder 0.3 Nm x 0.3-1.2 Nm kpn: 7460 kpn_dash: kpn_clear: 7460 bkpn: WERA 7460 bkpn_clear: WERA 7460 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074715001 sr_ns: WERA05074715001
r: 02953232 p: 47.603 pid: 33598 b: WERA q: 0 st: lt: 15 ean: 4013288208835 sr: WERA 05005080001 sr_no_br: 05005080001 sr_no_br_cl: 05005080001 sr_cl: WERA05005080001 sr_dash: sold: 95.206 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 4 Nm Drive size HEX 4 mm Drive type External hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 4 Nm Max. tightening torque 4 Nm n: WERA 400 Hex torque indicator 4 x 4.0 Nm - 05005080001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque indicator with fixed torque for hexagon sockets. Tamper proof. The robust slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and it is therefore impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Tamper-proof against accidental changing of set torque value Particularly corrosion resistant blade Application Hexagon socket screws Pre-set torque 4,0 Nm, 5,0 Nm; fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Round Design Hex-Plus, brushed chrome-plated finish, Black Point Handle T-handle, multi-component Features and benefits Torque-indicator with pre-set and tamperproof torque value Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 Hex Torque-indicator, 4 mm x 4.0 Nm kts: torque indicator 4 x 4.0 Nm kpn: 400 Hex kpn_dash: kpn_clear: 400Hex bkpn: WERA 400 Hex bkpn_clear: WERA 400Hex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05005080001 sr_ns: WERA05005080001
r: 41071094 p: 31.239 pid: 70459 b: WERA q: 0 st: lt: 14 ean: 4013288093325 sr: WERA 05027930001 sr_no_br: 05027930001 sr_no_br_cl: 05027930001 sr_cl: WERA05027930001 sr_dash: sold: 93.717 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,6 Nm Drive size T6 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,6 Nm Max. tightening torque 0,6 Nm n: WERA 300 TX torque indicator TORX, TX 6 x 0.6 Nm - 05027930001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 6 x 0.6 Nm kts: torque indicator TORX, TX 6 x 0.6 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027930001 sr_ns: WERA05027930001
r: 03229639 p: 86.446 pid: 71795 b: WERA q: 0 st: lt: 8 ean: 4013288188168 sr: WERA 05074717010 sr_no_br: 05074717010 sr_no_br_cl: 05074717010 sr_cl: WERA05074717010 sr_dash: sold: 86.446 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 3-6 Nm Max. tightening torque 6 Nm Product Range Wera Kraftform n: WERA 7462 Kraftform torque screwdriver with pistol grip 3.0-6.0 Nm - 05074717010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Kraftform pistol handle for particularly high torque transmission, multi-component for high working speeds and particularly ergonomic screwdriving. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137002001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with pistol handle Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Multi-component Kraftform handle for high working speeds Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform pistol grip, multi-component Features and benefits Pre-set, adjustable torque screwdrivers Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. Unlimited torque for loosening seized screws. ds: dsc: Scope of delivery Series 7400 Kraftform torque screwdrivers with a customised factory pre-set measurement value, pistol handle, 7462 x 3.0-6.0 Nm kts: Kraftform torque screwdriver with pistol grip 3.0-6.0 Nm kpn: 7462 kpn_dash: kpn_clear: 7462 bkpn: WERA 7462 bkpn_clear: WERA 7462 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074717010 sr_ns: WERA05074717010
r: 03229725 p: 83.636 pid: 70502 b: WERA q: 0 st: lt: 13 ean: 4013288188236 sr: WERA 05074840010 sr_no_br: 05074840010 sr_no_br_cl: 05074840010 sr_cl: WERA05074840010 sr_dash: sold: 83.636 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1,2 Nm Max. tightening torque 1,2 Nm Product Range Wera Kraftform n: WERA 7460 ESD Kraftform torque screwdriver 0.3-1.2 Nm - 05074840010 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Customized pre-set torque screwdriver with Rapidaptor quick-release chuck ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque Adjustable to customer requirements within the specified measurement range Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdriver. With a customised factory pre-set torque value. For all applications, where the same constant torque and repeat accuracy are required. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery Series 7400 ESD Kraftform torque screwdrivers with a customised factory pre-set measurement value, handle size 105 mm, 7460 ESD x 0.3-1.2 Nm kts: Kraftform torque screwdriver 0.3-1.2 Nm kpn: 7460 ESD kpn_dash: kpn_clear: 7460ESD bkpn: WERA 7460 ESD bkpn_clear: WERA 7460ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074840010 sr_ns: WERA05074840010
r: 03185044 p: 82.479 pid: 28000 b: WIHA q: 0 st: lt: 8 ean: 4010995264628 sr: WIHA 26462 sr_no_br: 26462 sr_no_br_cl: 26462 sr_cl: WIHA26462 sr_dash: sold: 82.479 p_range: KLIUM_PRODUCT_RANGE_346 type: standard act: 1 avo: 1 av: Min. tightening torque 0,5 Nm ESD No VDE approved No Adjustable torque range 0,5-2 Nm Max. tightening torque 2 Nm Product Range Wiha TorqueVario n: WIHA 28521200 TorqueVario-S torque screwdriver variable 0.5-2.0 Nm - 26462 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Meets your requirements: Variably adjustable torque covers a wide range of applications. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Lowers your costs: The correct torque protects you from warranty claims. Product dimensions: 195 x 35 x 35 mm (LxWxD) Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade. Accuracy: ±6%, tracing to national standards (see table for other tolerances). Handle: Torque infinitely adjustable with Torque-Setter setting tool (also supplied). Handle: Ergonomic multi-component handle, particulary light and compact. Handle: Handle sizes proportioned to optimise torque setting. Handle: Audible and perceptible click when the pre-set torque has been attained. Handle: Compatible with all blades of the 2859. Variably adjustable torque from 0.8 - 5.0 Nm Acoustic and physically perceptible triggering signal protects against damage to materials and rework Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs DIN EN ISO 6789. ds: dsc: kts: TorqueVario-S torque screwdriver variable 0.5-2.0 Nm kpn: 28521200 kpn_dash: kpn_clear: 28521200 bkpn: WIHA 28521200 bkpn_clear: WIHA 28521200 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquevario sr_no_br_cl_ns: 26462 sr_ns: WIHA26462
r: 02836009 p: 65.95 pid: 42077 b: WERA q: 0 st: lt: 11 ean: 4013288179227 sr: WERA 05074824001 sr_no_br: 05074824001 sr_no_br_cl: 05074824001 sr_cl: WERA05074824001 sr_dash: sold: 65.95 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 ESD Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074824001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Rapidaptor quick-release technology for rapid bit changes. Unlimited loosening torque for slackening stuck screws. Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 ESD x 0.9 Nm x 0.9-1.5 Nm kts: Kraftform torque screwdriver with 89mm handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 ESD kpn_dash: kpn_clear: 7452ESD bkpn: WERA 7452 ESD bkpn_clear: WERA 7452ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074824001 sr_ns: WERA05074824001
r: 08073683 p: 65.95 pid: 29077 b: WIHA q: 0 st: lt: 8 ean: 4010995269012 sr: WIHA 26901 sr_no_br: 26901 sr_no_br_cl: 26901 sr_cl: WIHA26901 sr_dash: sold: 65.95 p_range: KLIUM_PRODUCT_RANGE_345 type: standard act: 1 avo: 1 av: ESD No VDE approved No Product Range Wiha TorqueFix n: WIHA 28501150 TorqueFix torque screwdriver fixed torque limit 1.5 Nm - 26901 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Lowers your costs: The correct torque protects you from warranty claims. Increases your process reliability: Pre-set torque for repetitive work processes. Product dimensions: 125 x 35 x 35 mm (LxWxD) Application: For controlled fastening of circular plug connectors with hexagonal head according to specified torque. Extra: Incl. works inspection protocol. Accuracy: ±6%, traceable to national standards. ds: dsc: kts: TorqueFix torque screwdriver fixed torque limit 1.5 Nm kpn: 28501150 kpn_dash: kpn_clear: 28501150 bkpn: WIHA 28501150 bkpn_clear: WIHA 28501150 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquefix sr_no_br_cl_ns: 26901 sr_ns: WIHA26901
r: 02836014 p: 65.95 pid: 42086 b: WERA q: 0 st: lt: 12 ean: 4013288179098 sr: WERA 05074842001 sr_no_br: 05074842001 sr_no_br_cl: 05074842001 sr_cl: WERA05074842001 sr_dash: sold: 65.95 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 1,2 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD Yes VDE approved No With safety colour code 1000V No Adjustable torque range 1,2-3 Nm Max. tightening torque 3 Nm Product Range Wera Kraftform n: WERA 7461 ESD Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm - 05074842001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. Safe protection against electrostatic charge and associated damage. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set, adjustable Kraftform ESD torque screwdriver ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Kraftform handle for fast and ergonomic screwdriving Suitable for bits with 1/4" hex head drive Rapidaptor quick-release chuck for bits with 1/4" hex head drive Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.3 Nm, 1.2 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 ESD series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 105 mm, 7461 ESD x 1.2 Nm x 1.2-3.0 Nm kts: Kraftform torque screwdriver with standard setting and Rapidaptor quick-change holder 1.2 Nm x 1.2-3.0 Nm kpn: 7461 ESD kpn_dash: kpn_clear: 7461ESD bkpn: WERA 7461 ESD bkpn_clear: WERA 7461ESD c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074842001 sr_ns: WERA05074842001
r: 08073680 p: 62.644 pid: 29074 b: WIHA q: 0 st: lt: 8 ean: 4010995260484 sr: WIHA 26048 sr_no_br: 26048 sr_no_br_cl: 26048 sr_cl: WIHA26048 sr_dash: sold: 62.644 p_range: KLIUM_PRODUCT_RANGE_345 type: standard act: 1 avo: 1 av: ESD No VDE approved No Product Range Wiha TorqueFix n: WIHA 28501090 TorqueFix torque screwdriver fixed torque limit 0.9 Nm - 26048 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Lowers your costs: The correct torque protects you from warranty claims. Increases your process reliability: Pre-set torque for repetitive work processes. Product dimensions: 125 x 30 x 30 mm (LxWxD) Application: For controlled fastening of circular plug connectors with hexagonal head according to specified torque. Extra: Incl. works inspection protocol. Accuracy: ±6%, traceable to national standards. ds: dsc: kts: TorqueFix torque screwdriver fixed torque limit 0.9 Nm kpn: 28501090 kpn_dash: kpn_clear: 28501090 bkpn: WIHA 28501090 bkpn_clear: WIHA 28501090 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha torquefix sr_no_br_cl_ns: 26048 sr_ns: WIHA26048
r: 02716299 p: 56.859 pid: 51596 b: GEDORE q: 0 st: lt: 6 ean: 4010886950043 sr: GEDORE 2927799 sr_no_br: 2927799 sr_no_br_cl: 2927799 sr_cl: GEDORE2927799 sr_dash: sold: 56.859 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,05 Nm Adjustable torque range 0,05-0,25 Nm Max. tightening torque 0,25 Nm n: GEDORE ESD 25 FH torque screwdriver type PGNE FS 1/4" 0.05-0.25 Nm - 2927799 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Application Controlled screw tightening in the range 0.05 - 0.25 Nm Series assembly with constant tightening value Electronics industry, precision mechanics and industrial production Design Fixed adjustable torque spanner - without scale With 1/4" hexagonal socket for 1/4" bits according to DIN 3126 - C 6,3 Classified according to DIN EN ISO 67892003 Type II Class F, with traceable manufacturer's certificate Accuracy +/- 6 % tolerance of the set scale value Conforms to EPA (Electrostatic Protected Area), for use in electrostatically sensitive applications Precision ball mechanism for controlled clockwise and anticlockwise tightening Precision mechanism glides on noticeably when set value is reached Automatic return to home position Fatigue-free working is achieved by an ergonomic handle and quiet shut-off A calibration sticker can be applied in the designated place RAHSOL DREMOTEC can be supplied with a fixed factory setting or set manually using a suitable testing device If fixed factory setting is required, please state Nm value when ordering (price on request) Scope of delivery Torque screwdriver Type ESD FH Models 4.5 and 13.5 with additional transverse handle for easier work Test certificate in accordance with DIN EN ISO 6789-22017 Supplied in sturdy cardboard packaging ds: dsc: Scope of delivery Torque screwdriver Type ESD FH,Models 4.5 and 13.5 with additional transverse handle for easier work,Test certificate according to DIN EN ISO 6789-2:2017,Delivery in sturdy carton packaging kts: torque screwdriver type PGNE FS 1/4" 0.05-0.25 Nm kpn: ESD 25 FH kpn_dash: kpn_clear: ESD25FH bkpn: GEDORE ESD 25 FH bkpn_clear: GEDORE ESD25FH c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque screwdrivers / Gedore torque screwdriver sr_no_br_cl_ns: 2927799 sr_ns: GEDORE2927799
r: 02953168 p: 53.223 pid: 32765 b: WERA q: 0 st: lt: 15 ean: 4013288206398 sr: WERA 05004980001 sr_no_br: 05004980001 sr_no_br_cl: 05004980001 sr_cl: WERA05004980001 sr_dash: sold: 53.223 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 4 mm Drive type External hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 i Hex VDE insulated torque indicator, 4 x 5.0 Nm - 05004980001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera VDE torque indicator with fixed torque for hexagon socket screws. Tamper proof. The robust slip clutch generates a clearly audible and tactile trigger that signals when the set torque is reached, making it impossible to apply any further torque. The loosening torque value is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle perfectly fills the whole hand and fingers comfortably lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transfer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Tamper-proof against accidental changing of set torque value Application Hexagon socket screws Pre-set torque 5.0 Nm, fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Insulated, individually tested as per IEC 60900 Design Hex-Plus, Black Point Handle T-handle, multi-component Features and benefits Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 i VDE Hex Insulated torque-indicator, 4 mm x 5.0 Nm kts: VDE insulated torque indicator, 4 x 5.0 Nm kpn: 400 i Hex kpn_dash: kpn_clear: 400iHex bkpn: WERA 400 i Hex bkpn_clear: WERA 400iHex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05004980001 sr_ns: WERA05004980001
r: 02953170 p: 53.223 pid: 31742 b: WERA q: 0 st: lt: 15 ean: 4013288206114 sr: WERA 05004981001 sr_no_br: 05004981001 sr_no_br_cl: 05004981001 sr_cl: WERA05004981001 sr_dash: sold: 53.223 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 5 Nm Drive size HEX 5 mm Drive type External hexagon ESD No VDE approved Yes With safety colour code 1000V No Adjustable torque range 5 Nm Max. tightening torque 5 Nm n: WERA 400 i Hex VDE insulated torque indicator, 5 x 5.0 Nm - 05004981001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera VDE torque indicator with fixed torque for hexagon socket screws. Tamper proof. The robust slip clutch generates a clearly audible and tactile trigger that signals when the set torque is reached, making it impossible to apply any further torque. The loosening torque value is significantly higher than the set tightening torque, therefore no additional tools are needed for loosening screw connections. The shape of the handle perfectly fills the whole hand and fingers comfortably lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transfer. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V T-handle is ideal for transferring controlled tightening torque and high loosening torque Error-free screwdriving due to non-slip friction clutch and exact torque transmission Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. Tamper-proof against accidental changing of set torque value Application Hexagon socket screws Pre-set torque 5.0 Nm, fixed pre-set Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Insulated, individually tested as per IEC 60900 Design Hex-Plus, Black Point Handle T-handle, multi-component Features and benefits Insulated, individually tested VDE T-handle torque indicator for safe working up to 1,000V The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Suitable for applications requiring a non-adjustable i.e. a tamperproof torque blade assembly. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The ergonomic design of the T-handle fills the palm of the hand. The fingers rest in the soft, rounded recess, and the whole hand is in contact with the handle - so there is no friction loss between the hand and handle. Multi-component screwdriver handle for ergonomic working. The handle is marked with an indicative screw symbol, size, torque and maximum release torque. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery 400 i VDE Hex Insulated torque-indicator, 5 mm x 5.0 Nm kts: VDE insulated torque indicator, 5 x 5.0 Nm kpn: 400 i Hex kpn_dash: kpn_clear: 400iHex bkpn: WERA 400 i Hex bkpn_clear: WERA 400iHex c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05004981001 sr_ns: WERA05004981001
r: 02835961 p: 51.9 pid: 43811 b: WERA q: 0 st: lt: 11 ean: 4013288179197 sr: WERA 05074794001 sr_no_br: 05074794001 sr_no_br_cl: 05074794001 sr_cl: WERA05074794001 sr_dash: sold: 51.9 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,9-1,5 Nm Max. tightening torque 1,5 Nm Product Range Wera Kraftform n: WERA 7452 Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm - 05074794001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7452 x 0.9 Nm x 0.9-1.5 Nm kts: Kraftform torque screwdriver standard setting, handle and Rapidaptor quick-change holder 0.9 Nm x 0.9-1.5 Nm kpn: 7452 kpn_dash: kpn_clear: 7452 bkpn: WERA 7452 bkpn_clear: WERA 7452 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074794001 sr_ns: WERA05074794001
r: 02835965 p: 46.115 pid: 42130 b: WERA q: 0 st: lt: 12 ean: 4013288103116 sr: WERA 05074722001 sr_no_br: 05074722001 sr_no_br_cl: 05074722001 sr_cl: WERA05074722001 sr_dash: sold: 46.115 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 11 in lbs Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 11-29 in lbs Max. tightening torque 29 in lbs Product Range Wera Kraftform n: WERA 7466 Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. - 05074722001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 2.5 in.lbs., 11.0 in.lbs. Accuracy ±6 % (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137001001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 Imperial series Kraftform Torque screwdrivers, with factory pre-set value (2.5-29.0 in. lbs.) and Rapidaptor quick-release chuck, handle size 105 mm, 7466 x 11 in. lbs. kts: Kraftform adjustable torque screwdriver standard setting Rapidaptor quick-change holder 11 in. lbs. kpn: 7466 kpn_dash: kpn_clear: 7466 bkpn: WERA 7466 bkpn_clear: WERA 7466 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074722001 sr_ns: WERA05074722001
r: 41071095 p: 37.975 pid: 71788 b: WERA q: 0 st: lt: 15 ean: 4013288093332 sr: WERA 05027931001 sr_no_br: 05027931001 sr_no_br_cl: 05027931001 sr_cl: WERA05027931001 sr_dash: sold: 37.975 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 0,9 Nm Drive size T7 Drive type Torx ESD No VDE approved No With safety colour code 1000V Adjustable torque range 0,9 Nm Max. tightening torque 0,9 Nm n: WERA 300 TX torque indicator TORX, TX 7 x 0.9 Nm - 05027931001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver with fixed torque for recessed TORX® screws. Tamperproof and with a slim hex blade. Unlimited torque for loosening seized screws. Multi-component Kraftform handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Torque-indicator with pre-set and tamperproof torque value Distinct audible and perceivable excess load signal when the pre-set torque value is reached Non-adjustable and tamperproof Unlimited torque for loosening seized screws Multi-component Kraftform handle for fast and ergonomic screwdriving Application TORX® socket screws Pre-set torque 0.6 Nm-3.0 Nm (0.4 ft.lb.-2.2 ft.lb.), fixed pre-sets Accuracy ±10 %. Reliable slipping mechanism and acoustic signal when reaching the set torque. Blade Hexagonal, 4 mm, reduced diameter tip Design Black Point Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque-indicators have been factory pre-set to values recommended by leading carbide tool manufacturers. These tightening values relate specifically to the size of the TORX®, TORX PLUS® or hexagon socket screw. Torque indicators ensure safe and easy loosening of screw connections. Precision : ± 10 % Slim 4 mm hexagon blades to reach screws in difficult-to-access places. Non-adjustable and tamperproof. Distinctly audible and noticeable excess-load signal when the pre-set torque is reached. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Multi-component Kraftform handle with hard and soft zones for fast working speeds and protecting the palm of the hand. ds: dsc: Scope of delivery 300 TX TORX® Torque-indicator, TX 7 x 0.9 Nm kts: torque indicator TORX, TX 7 x 0.9 Nm kpn: 300 TX kpn_dash: kpn_clear: 300TX bkpn: WERA 300 TX bkpn_clear: WERA 300TX c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver sr_no_br_cl_ns: 05027931001 sr_ns: WERA05027931001
r: 08073754 p: 36.198 pid: 29144 b: WIHA q: 0 st: lt: 8 ean: 4010995362393 sr: WIHA 36239 sr_no_br: 36239 sr_no_br_cl: 36239 sr_cl: WIHA36239 sr_dash: sold: 36.198 p_range: KLIUM_PRODUCT_RANGE_318 type: standard act: 1 avo: 1 av: ESD No VDE approved No Product Range Wiha easyTorque n: WIHA 29201500 torque screwdriver easyTorque 5.0 Nm fixed torque limiter - 36239 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Lowers your costs: The correct torque protects you from warranty claims. Increases your efficiency: The correct torque protects material from damage and means no follow-up work. Product dimensions: 135 x 35 x 35 mm (LxWxD) Application: For applications where recommended torque settings are important. Use in combination with a Wiha torque interchangeable blade. Accuracy: ±10% Handle: Multi-component handle optimally designed for the hand enables optimal power transmission. Handle: Audible and perceptible click when the pre-set torque has been attained. Handle: Mechanism insensitive to industrial lubricants. Handle: Compatible with all blades of the 2859. Are you looking for controlled screw tightening without damage to materials and follow-up work? No problem with the easyTorque torque screwdriver, which ensures process safety in its application. Thanks to a click signal when reaching the set torque value, the work piece remains undamaged and protects you from warranty claims. The multi-component handle, which is ergonomically designed for the hand, enables optimum power transmission while protecting your health. In addition, the torque screwdriver is also compatible with all blades from the 2859 series. With its mechanics that are not affected by industrial lubricants, the torque screwdriver is your perfect companion for comfortable work. Designed based on the standard EN ISO 6789, the torque tool offers a release accuracy of +/- 10%. Bit holders or blades are not included in delivery. Based on DIN EN ISO 6789. ds: dsc: kts: torque screwdriver easyTorque 5.0 Nm fixed torque limiter kpn: 29201500 kpn_dash: kpn_clear: 29201500 bkpn: WIHA 29201500 bkpn_clear: WIHA 29201500 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha torque tools / Wiha torque screwdrivers / Wiha torque screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha easytorque sr_no_br_cl_ns: 36239 sr_ns: WIHA36239
