r: 08096941 p: 1.26 pid: 176336 b: FISCHER q: 0 st: lt: 8 ean: 4048962462739 sr: FISCHER 564648 sr_no_br: 564648 sr_no_br_cl: 564648 sr_cl: FISCHER564648 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 110 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564648 Piercing anchor FAZ II Plus 12/10 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 GS EV electrolytically galvanised steel kpn: 564648 kpn_dash: kpn_clear: 564648 bkpn: FISCHER 564648 bkpn_clear: FISCHER 564648 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564648 sr_ns: FISCHER564648
r: 03294162 p: 1.21 pid: 176177 b: FISCHER q: 0 st: lt: 8 ean: 4048962462722 sr: FISCHER 564647 sr_no_br: 564647 sr_no_br_cl: 564647 sr_cl: FISCHER564647 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 30 mm Overall length 115 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M10 n: FISCHER 564647 Piercing anchor FAZ II Plus 10/30 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/30 GS EV electrolytically galvanised steel kpn: 564647 kpn_dash: kpn_clear: 564647 bkpn: FISCHER 564647 bkpn_clear: FISCHER 564647 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564647 sr_ns: FISCHER564647
r: 87051115 p: 1.2 pid: 74436 b: FISCHER q: 0 st: lt: 6 ean: 4006209409435 sr: FISCHER 40943 sr_no_br: 40943 sr_no_br_cl: 40943 sr_cl: FISCHER40943 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 110/110 mm Overall length 176 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread dimension M10 n: FISCHER 40943 rapid-action anchor FBN II 10/100 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 10/100 electrolytically galvanised steel kpn: 40943 kpn_dash: kpn_clear: 40943 bkpn: FISCHER 40943 bkpn_clear: FISCHER 40943 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40943 sr_ns: FISCHER40943
r: 08096942 p: 1.19 pid: 176310 b: FISCHER q: 120 st: 1 lt: 1 ean: 4048962462111 sr: FISCHER 564586 sr_no_br: 564586 sr_no_br_cl: 564586 sr_cl: FISCHER564586 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 110 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564586 Piercing anchor FAZ II Plus 12/10 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 EV electrolytically galvanised steel kpn: 564586 kpn_dash: kpn_clear: 564586 bkpn: FISCHER 564586 bkpn_clear: FISCHER 564586 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564586 sr_ns: FISCHER564586
r: 08096935 p: 1.19 pid: 176304 b: FISCHER q: 0 st: lt: 8 ean: 4048962463071 sr: FISCHER 564682 sr_no_br: 564682 sr_no_br_cl: 564682 sr_cl: FISCHER564682 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 90 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564682 Piercing anchor FAZ II Plus 12/10 K GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus K GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the low anchorage depth and simple mounting, the FAZ II Plus K GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 K GS EV electrolytically galvanised steel kpn: 564682 kpn_dash: kpn_clear: 564682 bkpn: FISCHER 564682 bkpn_clear: FISCHER 564682 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564682 sr_ns: FISCHER564682
r: 03001453 p: 1.15 pid: 28840 b: DEWALT q: 1800 st: 1 lt: 1 ean: 0075352962221 sr: DEWALT DFM1110600 sr_no_br: DFM1110600 sr_no_br_cl: DFM1110600 sr_cl: DEWALTDFM1110600 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Overall length 115 mm Surface treatment (bolt) Zinc plated Thread dimension M12 Product Range Dewalt PTB-PRO n: DEWALT DFM1110600 PTB-PRO push-through anchor zinc-plated M12x115 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M12x115 Piercing anchor - Galvanised Features ETA option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M12x115 kpn: DFM1110600 kpn_dash: kpn_clear: DFM1110600 bkpn: DEWALT DFM1110600 bkpn_clear: DEWALT DFM1110600 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110600 sr_ns: DEWALTDFM1110600
r: 08096950 p: 1.14 pid: 176284 b: FISCHER q: 0 st: lt: 5 ean: 4048962462067 sr: FISCHER 564581 sr_no_br: 564581 sr_no_br_cl: 564581 sr_cl: FISCHER564581 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 30 mm Overall length 115 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M10 n: FISCHER 564581 Piercing anchor FAZ II Plus 10/30 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/30 EV electrolytically galvanised steel kpn: 564581 kpn_dash: kpn_clear: 564581 bkpn: FISCHER 564581 bkpn_clear: FISCHER 564581 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564581 sr_ns: FISCHER564581
r: 03001451 p: 1.13 pid: 25898 b: DEWALT q: 0 st: lt: 20 ean: 0075352962061 sr: DEWALT DFM1110400 sr_no_br: DFM1110400 sr_no_br_cl: DFM1110400 sr_cl: DEWALTDFM1110400 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Overall length 130 mm Surface treatment (bolt) Zinc plated Thread dimension M10 Product Range Dewalt PTB-PRO n: DEWALT DFM1110400 PTB-PRO push-through anchor zinc-plated M10x130 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M10x130 Piercing anchor - Galvanised Features ETA Option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M10x130 kpn: DFM1110400 kpn_dash: kpn_clear: DFM1110400 bkpn: DEWALT DFM1110400 bkpn_clear: DEWALT DFM1110400 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110400 sr_ns: DEWALTDFM1110400
r: 08096936 p: 1.13 pid: 176323 b: FISCHER q: 0 st: lt: 8 ean: 4048962462999 sr: FISCHER 564674 sr_no_br: 564674 sr_no_br_cl: 564674 sr_cl: FISCHER564674 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 90 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564674 Piercing anchor FAZ II Plus 12/10 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 K EV electrolytically galvanised steel kpn: 564674 kpn_dash: kpn_clear: 564674 bkpn: FISCHER 564674 bkpn_clear: FISCHER 564674 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564674 sr_ns: FISCHER564674
r: 03041937 p: 1.09 pid: 13208 b: DEWALT q: 0 st: lt: 7 ean: 0075352962207 sr: DEWALT DFM1110580 sr_no_br: DFM1110580 sr_no_br_cl: DFM1110580 sr_cl: DEWALTDFM1110580 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Overall length 105 mm Surface treatment (bolt) Zinc plated Thread dimension M12 Product Range Dewalt PTB-PRO n: DEWALT DFM1110580 PTB-PRO push-through anchor zinc-plated M12x105 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M12x105 Piercing anchor - Galvanised Features ETA option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M12x105 kpn: DFM1110580 kpn_dash: kpn_clear: DFM1110580 bkpn: DEWALT DFM1110580 bkpn_clear: DEWALT DFM1110580 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110580 sr_ns: DEWALTDFM1110580
r: 03001429 p: 1.06 pid: 26380 b: DEWALT q: 850 st: 1 lt: 1 ean: 0075352962184 sr: DEWALT DFM1110560 sr_no_br: DFM1110560 sr_no_br_cl: DFM1110560 sr_cl: DEWALTDFM1110560 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Overall length 100 mm Surface treatment (bolt) Zinc plated Thread dimension M12 Product Range Dewalt PTB-PRO n: DEWALT DFM1110560 PTB-PRO push-through anchor zinc-plated M12x100 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M12x100 Piercing anchor - Zinc-plated Features ETA option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M12x100 kpn: DFM1110560 kpn_dash: kpn_clear: DFM1110560 bkpn: DEWALT DFM1110560 bkpn_clear: DEWALT DFM1110560 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110560 sr_ns: DEWALTDFM1110560
r: 08096853 p: 1.02 pid: 176254 b: FISCHER q: 0 st: lt: 8 ean: 4048962462012 sr: FISCHER 564576 sr_no_br: 564576 sr_no_br_cl: 564576 sr_cl: FISCHER564576 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 50 mm Overall length 115 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M8 n: FISCHER 564576 Piercing anchor FAZ II Plus 8/50 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 8/50 EV electrolytically galvanised steel kpn: 564576 kpn_dash: kpn_clear: 564576 bkpn: FISCHER 564576 bkpn_clear: FISCHER 564576 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564576 sr_ns: FISCHER564576
r: 08096953 p: 1.01 pid: 176358 b: FISCHER q: 0 st: lt: 8 ean: 4048962462982 sr: FISCHER 564673 sr_no_br: 564673 sr_no_br_cl: 564673 sr_cl: FISCHER564673 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20 mm Overall length 85 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M10 n: FISCHER 564673 Piercing anchor FAZ II Plus 10/20 K EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/20 K EV electrolytically galvanised steel kpn: 564673 kpn_dash: kpn_clear: 564673 bkpn: FISCHER 564673 bkpn_clear: FISCHER 564673 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564673 sr_ns: FISCHER564673
r: 03041935 p: 1 pid: 10938 b: DEWALT q: 0 st: lt: 10 ean: 0075352962146 sr: DEWALT DFM1110520 sr_no_br: DFM1110520 sr_no_br_cl: DFM1110520 sr_cl: DEWALTDFM1110520 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Overall length 90 mm Surface treatment (bolt) Zinc plated Thread dimension M12 Product Range Dewalt PTB-PRO n: DEWALT DFM1110520 PTB-PRO push-through anchor zinc-plated M12x90 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M12x90 Piercing anchor - Galvanised Features ETA Option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M12x90 kpn: DFM1110520 kpn_dash: kpn_clear: DFM1110520 bkpn: DEWALT DFM1110520 bkpn_clear: DEWALT DFM1110520 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110520 sr_ns: DEWALTDFM1110520
r: 03041923 p: 0.99 pid: 12979 b: DEWALT q: 0 st: lt: 6 ean: 0075352961927 sr: DEWALT DFM1110200 sr_no_br: DFM1110200 sr_no_br_cl: DFM1110200 sr_cl: DEWALTDFM1110200 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_210 type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Overall length 155 mm Surface treatment (bolt) Zinc plated Thread dimension M8 Product Range Dewalt PTB-PRO n: DEWALT DFM1110200 PTB-PRO push-through anchor zinc-plated M8x155 cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description PTB-PRO M8x155 Piercing anchor - Zinc-plated Features ETA option 1 approval for cracked and uncracked concrete* Approved for seismic loading (M8-M16)**C1 approved and M12*C2 approved Two approved installation depths (M12 and M16)* Long thread for flexibility in fixture thicknesses Special cone design for quick installation Fireproof * PTB-PRO galvanised and stainless steel ** PTB-PRO galvanised ds: DeWALT Power Month at Klium - Maximum Advantage! This DeWALT tool is part of the DeWALT Power Month at Klium. That means you can stack your benefits. What does this mean in practice? Spend €350 excl. VAT on DeWALT products? Then you will immediately receive a free XR 18V 5.0Ah battery (Klium only - automatically added to your cart). Purchase a selected 18V or 54V XR garden machine? Then you can choose one of the 4 extra gifts within the official Buy & Get promotion. Promotion valid from 01.05.2026 until 30.05.2026 or while stocks last. Register your purchase afterwards via dewalt.be or dewalt.nl . Smart professionals combine their purchases and get the maximum out of this month! dsc: kts: PTB-PRO push-through anchor zinc-plated M8x155 kpn: DFM1110200 kpn_dash: kpn_clear: DFM1110200 bkpn: DEWALT DFM1110200 bkpn_clear: DEWALT DFM1110200 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Dewalt / Dewalt fasteners and machine components / Dewalt fasteners / Dewalt anchoring / Dewalt anchor bolt | Home / Our brands / Dewalt / Dewalt Ranges / Dewalt ptb-pro sr_no_br_cl_ns: DFM1110200 sr_ns: DEWALTDFM1110200
r: 08096968 p: 0.99 pid: 176364 b: FISCHER q: 0 st: lt: 8 ean: 4048962462715 sr: FISCHER 564646 sr_no_br: 564646 sr_no_br_cl: 564646 sr_cl: FISCHER564646 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M10 n: FISCHER 564646 Piercing anchor FAZ II Plus 10/10 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 GS EV electrolytically galvanised steel kpn: 564646 kpn_dash: kpn_clear: 564646 bkpn: FISCHER 564646 bkpn_clear: FISCHER 564646 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564646 sr_ns: FISCHER564646
r: 08096962 p: 0.95 pid: 176354 b: FISCHER q: 0 st: lt: 8 ean: 4048962463064 sr: FISCHER 564681 sr_no_br: 564681 sr_no_br_cl: 564681 sr_cl: FISCHER564681 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 75 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M10 n: FISCHER 564681 Piercing anchor FAZ II Plus 10/10 K GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus K GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the low anchorage depth and simple mounting, the FAZ II Plus K GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Millimeter accurate adjustment to the loads due to the variable anchoring depths Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 K GS EV electrolytically galvanised steel kpn: 564681 kpn_dash: kpn_clear: 564681 bkpn: FISCHER 564681 bkpn_clear: FISCHER 564681 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564681 sr_ns: FISCHER564681
