What is CRC Power Lube with PTFE used for?

You use it for long-lasting lubrication and protection of bearings, cables, chains, hinges, guide rails, and tools.

What is the benefit of adding PTFE?

PTFE significantly reduces friction and wear. It maintains a durable lubricating film even under heavy loads and frequent start-up cycles.

Does this lubricant displace moisture?

Yes, it penetrates deep into crevices, effectively displaces moisture, and leaves a protective anti-corrosion film on metal surfaces.

Is this spray safe for all metals?

Yes, it is safe on all metals and alloys. For plastics, rubber, or painted surfaces, test on an inconspicuous area first.

How do you apply this lubricating oil?

Shake the can well before use and spray a thin, even coat onto the parts. Allow a short time for penetration to ensure optimal results.

CRC Power Lube light lubricating oil with PTFE (500 ml) - 2040050_SP500

Supplier number: CRC 2040050_SP500 | EAN 5412386062568

From 1 piece €26.60

From 12 pieces €25.27 - €15.96 saving

From 24 pieces €24.60 - €47.88 saving

From 36 pieces €23.94 - €95.76 saving

26.60 tax incl.

€21.98 excl. VAT (incl. all environmental contributions)

On stock - immediately available

Ordered before 20:00 - delivered tomorrow 03/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL
Delivered from Belgium

↓ Documents (2) ✆ Talk to a specialist

Smooth lubrication under heavy loads

Practical benefits

Deep penetration in mechanisms: The low-viscosity oil reaches deep into narrow crevices and joints to loosen and lubricate moving parts effortlessly.
Reduced friction with PTFE: Fortified with PTFE, it creates a long-lasting protective film that limits wear and extends the service life of equipment.
Reliable moisture displacement barrier: You displace water instantly and seal out corrosion, keeping your critical metal components working reliably in tough environments.

In a nutshell

The right choise for

Keep all your moving components running smoothly and reliably with Crc Power Lube with PTFE. This low-viscosity lubricating oil penetrates deep into tight crevices, hinges, and bearings to stop squeaking and free up stiff mechanisms. Fortified with PTFE, it forms a durable, low-friction protective film that prevents wear even under heavy loads. The advanced formula also displaces moisture immediately, safeguarding metal parts against corrosion and rust. Whether you are maintaining workshop tools, lubricating chains and guide rails, or protecting precision equipment, this 500 ml aerosol provides dependable protection and keeps your machinery in optimal condition.

Product information FAQ

€26.60

In stock - tax incl.

Key features according to our expert

Net volume: 0,5 l
Principal hazard property: GHS02 Flammable
Relative density: 0,71
ADR packing group: Not applicable
ADR class: 2.1
Packaging: Spray can
UN number: UN1950
P-statements: P102; P210; P211; P251; P261; P280; P333 + P313; P410 + P412; P501
H-statements: H222; H229; H304; H315; H319; H336; H411
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard
Physical state: Aerosol
Flash point: -26 °C

Product description:

Lightweight lubricant with PTFE, for use on applications with frequent restarts.
A superior general purpose lubricant, contains PTFE.
Guarantees long-term protection against friction, wear and corrosion.

Precautionary statements

P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H222: Extremely flammable aerosol.
H229: Pressurised container: May burst if heated.
H304: May be fatal if swallowed and enters airways.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Net volume: 0,5 l
Principal hazard property: GHS02 Flammable
Relative density: 0,71
Adr packing group: Not applicable
Adr class: 2.1
Packaging: Spray can
Un number: UN1950
P-statements: P102; P210; P211; P251; P261; P280; P333 + P313; P410 + P412; P501
H-statements: H222; H229; H304; H315; H319; H336; H411
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard
Physical state: Aerosol
Flash point: -26 °C
Volume: 500 ml

Brand CRC
02768827
EAN 5412386062568
Supplier number CRC 2040050_SP500

Frequently asked questions about this product

Answered by specialists

What is CRC Power Lube with PTFE used for?: You use it for long-lasting lubrication and protection of bearings, cables, chains, hinges, guide rails, and tools.
What is the benefit of adding PTFE?: PTFE significantly reduces friction and wear. It maintains a durable lubricating film even under heavy loads and frequent start-up cycles.
Does this lubricant displace moisture?: Yes, it penetrates deep into crevices, effectively displaces moisture, and leaves a protective anti-corrosion film on metal surfaces.
Is this spray safe for all metals?: Yes, it is safe on all metals and alloys. For plastics, rubber, or painted surfaces, test on an inconspicuous area first.
How do you apply this lubricating oil?: Shake the can well before use and spray a thin, even coat onto the parts. Allow a short time for penetration to ensure optimal results.