r: 51610511 p: 12 pid: 139066 b: METABO q: 0 st: lt: 8 ean: 4007430182463 sr: METABO 626206000 sr_no_br: 626206000 sr_no_br_cl: 626206000 sr_cl: METABO626206000 sr_dash: sold: 36 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Drill bit type Hammer drill bit Overall length 210 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 150 mm n: METABO 626206000 SDS-Plus Pro 4 Premium hammer drill bit 6x215mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Intelligent geometry with its uncompromised quality of detail ensures a long service life, precise drill holes and maximum quiet running - even on the toughest loads. Highest level of safety thanks to the optimum symmetrical head geometry with 4 full carbide cutters, which do not catch when encountering reinforcing. Up to Ø 16 mm: with innovative, welded full carbide head for maximum tool life and larger dust outputs for highest drill speed Power breakers cause micro tears in the material for a noticeable quicker drill progress Low-vibration drilling with 4-spiral helix. 2 large volume helixes remove the bore dust quickly and reliably from the drill hole, two reinforced spirals ensure additional safety and stability. Extremely resistant to breakage thanks to high-grade special steel Very long tool life for up to 50% more dowel-compatible circular bores For professional use in masonry, concrete and armoured concrete ds: dsc: kts: SDS-Plus Pro 4 Premium hammer drill bit 6x215mm kpn: 626206000 kpn_dash: kpn_clear: 626206000 bkpn: METABO 626206000 bkpn_clear: METABO 626206000 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Metabo / Metabo tools / Metabo machining tools / Metabo cutting tools / Metabo drilling and punching / Metabo drill bit sr_no_br_cl_ns: 626206000 sr_ns: METABO626206000
r: 02157089 p: 7.2 pid: 141421 b: METABO q: 0 st: lt: 8 ean: 4007430065964 sr: METABO 627973000 sr_no_br: 627973000 sr_no_br_cl: 627973000 sr_cl: METABO627973000 sr_dash: sold: 36 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Drill bit type Metal drill bit Overall length 117 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) HSS-G Standard DIN 338 Number of cutting edges 2 ea Cutting length 75 mm n: METABO 627973000 hss-g drill bit 8x117 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Precision spiral drill bit made of high-grade high-speed steel according to DIN 338, precision ground, cylindrical, right-hand cutting, type N, crosswise grinding 135° according to DIN 1412 C (from 3 mm), diameter tolerance h8 Bare surface For highest demands and precision in industry and crafts. For drilling steels, cast steel, alloyed and unalloyed, grey cast iron, tempered cast iron, ductile cast iron, sintered iron, nickel silver, graphite, NF metals, plastic. Up to 900 N/mm² tensile strength. ds: dsc: kts: hss-g drill bit 8x117 mm kpn: 627973000 kpn_dash: kpn_clear: 627973000 bkpn: METABO 627973000 bkpn_clear: METABO 627973000 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Metabo / Metabo tools / Metabo machining tools / Metabo cutting tools / Metabo drilling and punching / Metabo drill bit sr_no_br_cl_ns: 627973000 sr_ns: METABO627973000
r: 02222488 p: 3.6 pid: 132047 b: BOSCH q: 0 st: lt: 8 ean: 3165140186698 sr: BOSCH 2608597657 sr_no_br: 2608597657 sr_no_br_cl: 2608597657 sr_cl: BOSCH2608597657 sr_dash: sold: 36 p_range: none type: standard act: 1 avo: 1 av: Diameter 4,5 mm Cutting length 40 mm Drill bit type Concrete drill bit Overall length 75 mm Shank size 4,5 mm Shank type Cylindrical Material (drill bit) Carbide tip Number of cutting edges 2 ea n: BOSCH 2608597657 concrete drill CYL-3, 4.5 x 40 x 75 mm, D3.8 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-3, 4.5 x 40 x 75 mm, D3.8 mm Good performance in concrete CYL-3 drill bit lasts a long time when drilling in concrete High wear resistance due to durable carbide mixture developed and manufactured by Bosch Advantages Durable performance in concrete - The CYL-3 drill bit lasts a long time when drilling in concrete. A highly durable carbide mixture developed and manufactured by Bosch makes this drill very durable. This mixture ensures a long drill bit life and high wear resistance when drilling in concrete. The effective U-shaped design with 2 spirals means that drilling dust and grit are well removed and the drill bit lasts longer as there is less friction, the drill bit gets less hot and wears out less quickly. The drill bit is durable when drilling fixing holes in abrasive materials, such as concrete and natural stone. This drill fits cylinder shank systems for all corded or cordless drills. The PGM Masonry Drill Bit Association Board quality mark on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-3, 4.5 x 40 x 75 mm, D3.8 mm kpn: 2608597657 kpn_dash: kpn_clear: 2608597657 bkpn: BOSCH 2608597657 bkpn_clear: BOSCH 2608597657 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597657 sr_ns: BOSCH2608597657
r: 51630764 p: 0.4 pid: 82689 b: INTERNATIONAL TOOLS q: 10 st: 1 lt: 1 ean: 8716563232223 sr: INTERNATIONAL TOOLS 114000300 sr_no_br: 114000300 sr_no_br_cl: 114000300 sr_cl: INTERNATIONALTOOLS114000300 sr_dash: sold: 36 p_range: none type: standard act: 1 avo: 1 av: Diameter 3 mm Material (drill bit) HSS Cutting length 33 mm Standard DIN 338 Number of cutting edges 2 ea Shank type Cylindrical Shank size 3 mm Overall length 61 mm Drill bit type Metal drill bit n: INTERNATIONAL TOOLS 114000300 ECO HSS spiral drill bit DIN 338 rolled 3 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product Description: International Tools ECO HSS Jobber Drill DIN 338 roll-forged DIN 338, straight shank, roll-forged version, point angle 118° ds: dsc: kts: ECO HSS spiral drill bit DIN 338 rolled 3 mm kpn: 114000300 kpn_dash: kpn_clear: 114000300 bkpn: INTERNATIONAL TOOLS 114000300 bkpn_clear: INTERNATIONAL TOOLS 114000300 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / International tools / International tools tools / International tools machining tools / International tools cutting tools / International tools drilling and punching / International tools drill bit sr_no_br_cl_ns: 114000300 sr_ns: INTERNATIONALTOOLS114000300
r: 08051777 p: 3.59 pid: 136356 b: BOSCH q: 3 st: 1 lt: 1 ean: 4059952533896 sr: BOSCH 2608900315 sr_no_br: 2608900315 sr_no_br_cl: 2608900315 sr_cl: BOSCH2608900315 sr_dash: sold: 35.9 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 16 mm Drill bit type Wood drill bit Overall length 152 mm Shank size 1/4 inch Shank type Hexagonal Material (drill bit) Chrome-vanadium steel Number of cutting edges 2 ea Product Range Bosch Expert n: BOSCH 2608900315 Expert speed drill Self Cut Speed, hexagonal shank 16 x 152 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Speed Drill Self Cut Speed, hex shank 16 x 152 mm Up to 3x faster than a 2609255269 speed drill bit from Bosch Fast drilling is easy with Bosch Tip Technology 1/4-inch hexagonal shank for use with three-claw drill chucks and hexagonal drill/screwdriver chucks. Advantages Up to 3x faster than a 2609255269 speed drill bit from Bosch - Speed drills are a great accessory for electricians and other installers and builders. What if they could be even faster and more efficient? With Bosch Tip Technology, it is possible. The EXPERT Self Cut Speed features the most advanced designs for speed drills, making it easy to use and very practical for professionals who need to do tough jobs. The patented Bosch screw tip brings the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. The Bosch EXPERT Self Cut Speed drill offers efficiency and convenience to professionals who need to drill holes for cabling, pipes and other hardware installations. The drill also works perfectly in all types of softwood. 1/4-inch hex shank for use with three-claw drill chucks and hex drill/screw machine chucks. Drilling in wood at maximum speedThe Expert SelfCut Speed features the most advanced designs for speed drilling, making it easy to use and very practical for professionals with tough jobs. The patented Bosch screw tip takes the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert speed drill Self Cut Speed, hexagonal shank 16 x 152 mm kpn: 2608900315 kpn_dash: kpn_clear: 2608900315 bkpn: BOSCH 2608900315 bkpn_clear: BOSCH 2608900315 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900315 sr_ns: BOSCH2608900315
r: 08055268 p: 35.867 pid: 113099 b: MAKITA q: 0 st: lt: 10 ean: 0088381521826 sr: MAKITA B-58936 sr_no_br: B-58936 sr_no_br_cl: B58936 sr_cl: MAKITAB58936 sr_dash: MAKITA B sold: 35.867 p_range: KLIUM_PRODUCT_RANGE_101 type: standard act: 1 avo: 1 av: Diameter 12 mm Drill bit type Hammer drill bit Overall length 160 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Number per blister 5 Cutting length 110 mm Product Range Makita NEMESIS II n: MAKITA B-58936 SDS-Plus NEMESIS II concrete drill bit (5 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit SDS-PLUS, Nemesis 2, 12 x 160 mm Nemesis II drill bit for drilling into concrete. The drill bit is suitable for SDS-PLUS machines and especially for users who frequently drill into reinforced concrete. Centre tip and solid carbide tip with 4 cutting edges ensure precise, optimal and fast drilling. The dimensions of this bit are 12 x 160 mm with a working length of 110 mm. Pack of 5 pieces. Nemesis II drill bits for models suitable for the SDS-PLUS shank. Drills with 4 fully carbide cutting edges help in precise starting and fast drilling into material. The drill's highly durable 4 spirals efficiently remove dust for smooth and fast drilling. ds: dsc: kts: SDS-Plus NEMESIS II concrete drill bit (5 pcs) kpn: B-58936 kpn_dash: B kpn_clear: B58936 bkpn: MAKITA B-58936 bkpn_clear: MAKITA B58936 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Makita / Makita tools / Makita machining tools / Makita cutting tools / Makita drilling and punching / Makita drill bit | Home / Our brands / Makita / Makita Ranges / Makita nemesis ii sr_no_br_cl_ns: B58936 sr_ns: MAKITAB-58936
r: 02355648 p: 11.95 pid: 180499 b: SPAX q: 4 st: 1 lt: 1 ean: 4003530189388 sr: SPAX 4009409873002 sr_no_br: 4009409873002 sr_no_br_cl: 4009409873002 sr_cl: SPAX4009409873002 sr_dash: sold: 35.85 p_range: none type: standard act: 1 avo: 1 av: Smallest diameter 4,1 mm Largest diameter 6,5 mm Number of steps 2 n: SPAX 4009409873002 Drill 2 Step two-stage drill bit 4.1 mm/6.5 mm x 48 mm cn: STEP DRILL BIT cn2: STEP DRILL BIT cn_clear: STEPDRILLBIT d: Product description: Application: Deck construction In order to prevent potential discoloration of the wood, we recommend that you remove the drilling dust that arises when drilling immediately after you finish drilling the holes. Features With 2 drilling steps of 4,1 and 6,5 mm diameter ds: dsc: kts: Drill 2 Step two-stage drill bit 4.1 mm/6.5 mm x 48 mm kpn: 4009409873002 kpn_dash: kpn_clear: 4009409873002 bkpn: SPAX 4009409873002 bkpn_clear: SPAX 4009409873002 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Step drill bit | Home / Our brands / Spax / Spax tools / Spax machining tools / Spax cutting tools / Spax drilling and punching / Spax step drill bit sr_no_br_cl_ns: 4009409873002 sr_ns: SPAX4009409873002
r: 02276779 p: 3.58 pid: 128783 b: BOSCH q: 4 st: 1 lt: 1 ean: 3165140690294 sr: BOSCH 2608588138 sr_no_br: 2608588138 sr_no_br_cl: 2608588138 sr_cl: BOSCH2608588138 sr_dash: sold: 35.8 p_range: none type: standard act: 1 avo: 1 av: Diameter 4 mm Cutting length 50 mm Drill bit type Concrete drill bit Overall length 90 mm Shank size 4 mm Shank type Cylindrical Material (drill bit) Carbide tip Number of cutting edges 2 ea n: BOSCH 2608588138 concrete drill CYL-5, 4 x 50 x 90 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 4 x 50 x 90 mm Long service life for concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 4 x 50 x 90 mm kpn: 2608588138 kpn_dash: kpn_clear: 2608588138 bkpn: BOSCH 2608588138 bkpn_clear: BOSCH 2608588138 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588138 sr_ns: BOSCH2608588138
r: 02156380 p: 11.9 pid: 141188 b: METABO q: 0 st: lt: 8 ean: 4007430193414 sr: METABO 626237000 sr_no_br: 626237000 sr_no_br_cl: 626237000 sr_cl: METABO626237000 sr_dash: sold: 35.7 p_range: none type: standard act: 1 avo: 1 av: Diameter 5 mm Drill bit type Hammer drill bit Overall length 110 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 250 mm n: METABO 626237000 SDS-Plus Pro 4 Premium hammer drill bit 4-coils 8x315mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Intelligent geometry with its uncompromised quality of detail ensures a long service life, precise drill holes and maximum quiet running - even on the toughest loads. Highest level of safety thanks to the optimum symmetrical head geometry with 4 full carbide cutters, which do not catch when encountering reinforcing. Up to Ø 16 mm: with innovative, welded full carbide head for maximum tool life and larger dust outputs for highest drill speed Power breakers cause micro tears in the material for a noticeable quicker drill progress Low-vibration drilling with 4-spiral helix. 2 large volume helixes remove the bore dust quickly and reliably from the drill hole, two reinforced spirals ensure additional safety and stability. Extremely resistant to breakage thanks to high-grade special steel Very long tool life for up to 50% more dowel-compatible circular bores For professional use in masonry, concrete and armoured concrete ds: dsc: kts: SDS-Plus Pro 4 Premium hammer drill bit 4-coils 8x315mm kpn: 626237000 kpn_dash: kpn_clear: 626237000 bkpn: METABO 626237000 bkpn_clear: METABO 626237000 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Metabo / Metabo tools / Metabo machining tools / Metabo cutting tools / Metabo drilling and punching / Metabo drill bit sr_no_br_cl_ns: 626237000 sr_ns: METABO626237000
r: 08070731 p: 11.9 pid: 133803 b: DEWALT q: 0 st: lt: 8 ean: 5035048535158 sr: DEWALT DT4964-QZ sr_no_br: DT4964-QZ sr_no_br_cl: DT4964QZ sr_cl: DEWALTDT4964QZ sr_dash: DEWALT DT4964 sold: 35.7 p_range: none type: standard act: 1 avo: 1 av: Diameter 9,5 mm Drill bit type Metal drill bit Overall length 125 mm Shank size 9,5 mm Shank type Cylindrical Material (drill bit) HSS-E Co 5% Number of cutting edges 2 ea Cutting length 78 mm n: DEWALT DT4964-QZ HSS INDUSTRIAL COBALT metal drill bit 9.5mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description HSS INDUSTRIAL COBALT 9.5mm Features Suitable for portable or stationary drilling of high-alloy steels and metals with a tensile strength of up to 1100N/mm² 'No-walk' tip allows for easier drilling in all surfaces (5mm and above). Cleaner, more accurate, burr-free holes thanks to countersunk cutting edges Three-sided shank for optimum grip in drill head ds: DeWALT Power Month at Klium - Maximum savings! This DeWALT tool is part of the DeWALT Power Month at Klium. What does this mean? Spend €350 excl. VAT on DeWALT products and receive a free XR 18V 5.0Ah battery instantly (Klium only - automatically added to your shopping cart). Offer valid from 01.08.2026 through 31.08.2026 or while stocks last. Once it's gone, it's gone. dsc: kts: HSS INDUSTRIAL COBALT metal drill bit 9.5mm kpn: DT4964-QZ kpn_dash: DT4964 kpn_clear: DT4964QZ bkpn: DEWALT DT4964-QZ bkpn_clear: DEWALT DT4964QZ c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Dewalt / Dewalt tools / Dewalt machining tools / Dewalt cutting tools / Dewalt drilling and punching / Dewalt drill bit sr_no_br_cl_ns: DT4964QZ sr_ns: DEWALTDT4964-QZ
r: 02221824 p: 8.925 pid: 131815 b: BOSCH q: 0 st: lt: 6 ean: 3165140290623 sr: BOSCH 2608595062 sr_no_br: 2608595062 sr_no_br_cl: 2608595062 sr_cl: BOSCH2608595062 sr_dash: sold: 35.7 p_range: none type: standard act: 1 avo: 1 av: Diameter 5 mm Material (drill bit) HSS-G Cutting length 52 mm Number of cutting edges 2 ea Standard DIN 338 Number per blister 10 Shank type Cylindrical Shank size 5 mm Overall length 86 mm Drill bit type Metal drill bit n: BOSCH 2608595062 metal drill bit HSS-G, DIN 338, 5 x 52 x 86 mm (10 pieces) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-G, DIN 338, 5 x 52 x 86 mm 10x Drilling with high precision HSS spiral drill offers full drilling functionality for standard use on metal Self-centring, 135-degree split tip combines active cutting action with perfect centring without drift Advantages Maximum precision - The HSS spiral drill ground provides maximum precision when drilling into metal. The self-centring 135-degree split point combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill ground is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-G, DIN 338, 5 x 52 x 86 mm (10 pieces) kpn: 2608595062 kpn_dash: kpn_clear: 2608595062 bkpn: BOSCH 2608595062 bkpn_clear: BOSCH 2608595062 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608595062 sr_ns: BOSCH2608595062
r: 02828455 p: 7.107 pid: 4885 b: WERA q: 0 st: lt: 11 ean: 4013288101433 sr: WERA 05104622001 sr_no_br: 05104622001 sr_no_br_cl: 05104622001 sr_cl: WERA05104622001 sr_dash: sold: 35.535 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Cutting length 38 mm Drill bit type Metal drill bit Overall length 54 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) HSS Number of cutting edges 2 ea n: WERA 848 HSS metal drill bit 10 x 54 mm - 05104622001 cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Twist bit for metal applications Hex shaft for very good power transfer HSS = high speed steel with split point Finely-tuned material elasticity for great durability Very good concentricity Application For precise drilling in metal Construction HSS Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6,3 ISO 1173 holders Features and benefits Twist drill bits - for metal applications 1/4" drive suitable for holders as per DIN 3126-D 6.3 (ISO 1173) Hexagon shaft for very high torque transfer HSS = high speed steel with cone point Finely adjusted material elasticity for long service life Excellent concentricity Tough-absorbing tempered bits for particularly long service life ds: dsc: Scope of delivery 848 HSS Metal Twist Drill Bits, 10 x 54 mm kts: metal drill bit 10 x 54 mm kpn: 848 HSS kpn_dash: kpn_clear: 848HSS bkpn: WERA 848 HSS bkpn_clear: WERA 848HSS c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Wera / Wera tools / Wera machining tools / Wera cutting tools / Wera drilling and punching / Wera drill bit sr_no_br_cl_ns: 05104622001 sr_ns: WERA05104622001
r: 08135755 p: 7.107 pid: 177264 b: BOSCH q: 0 st: lt: 8 ean: 4059952682860 sr: BOSCH 2608902038 sr_no_br: 2608902038 sr_no_br_cl: 2608902038 sr_cl: BOSCH2608902038 sr_dash: sold: 35.535 p_range: none type: standard act: 1 avo: 1 av: Diameter 7,15 mm Overall length 85 mm Effective length 44 mm Shank size 1/4 inch Shank type External hexagon n: BOSCH 2608902038 centre drill for EXPERT Power Change Plus HSS-Co Ø7.15 x 44 x 85 mm cn: PILOT DRILL cn2: PILOT DRILL cn_clear: PILOTDRILL d: Product description Changing holesaws and drills at high speed Enjoy maximum efficiency with a Bosch Quick Change system: our innovative mechanical developments for changing accessories. Suitable for a full range of hole saws, from 14 mm to 210 mm. Unlike most adapters, the largest and smallest sizes fit on it. Designed for quick and easy removal of drill cores. The centring bit can be used to push out the drill core quickly and smoothly. Reinforced shank for longer service life. A rounded shank and a special reinforcement process eliminate stress concentrations to prevent premature breakage. Attach and remove hole saw and centre drill with a single click. This tool-free system requires no screws or bolts and still provides a secure connection. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness ds: dsc: kts: centre drill for EXPERT Power Change Plus HSS-Co Ø7.15 x 44 x 85 mm kpn: 2608902038 kpn_dash: kpn_clear: 2608902038 bkpn: BOSCH 2608902038 bkpn_clear: BOSCH 2608902038 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Pilot drill | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch pilot drill sr_no_br_cl_ns: 2608902038 sr_ns: BOSCH2608902038
r: 02222129 p: 7.107 pid: 131873 b: BOSCH q: 0 st: lt: 8 ean: 3165140067003 sr: BOSCH 2608596810 sr_no_br: 2608596810 sr_no_br_cl: 2608596810 sr_cl: BOSCH2608596810 sr_dash: sold: 35.535 p_range: none type: standard act: 1 avo: 1 av: Diameter 2,5 mm Material (drill bit) HSS-G Cutting length 62 mm Number of cutting edges 2 ea Standard DIN 340 Number per blister 5 Shank type Cylindrical Shank size 2,5 mm Overall length 95 mm Drill bit type Metal drill bit n: BOSCH 2608596810 metal drill bit HSS-G, DIN 340, 2.5 x 62 x 95 mm (5 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-G, DIN 340, 2.5 x 62 x 95 mm 5x Drilling deep holes with maximum precision Long HSS spiral drill ground ensures maximum precision when drilling deep holes in metal Thanks to the extra length, this drill bit can drill deeper holes Advantages Deep holes with maximum precision - The long HSS spiral drill bit ground ensures maximum precision when drilling deep holes in metal. Thanks to its extra length, this drill bit can drill deeper holes. The self-centring, 135-degree split tip combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling deep holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill bit has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines The long HSS spiral drill bit ground is produced in accordance with DIN 340. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-G, DIN 340, 2.5 x 62 x 95 mm (5 pcs) kpn: 2608596810 kpn_dash: kpn_clear: 2608596810 bkpn: BOSCH 2608596810 bkpn_clear: BOSCH 2608596810 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596810 sr_ns: BOSCH2608596810
