Which mortar is suitable for this anchor rod?

You can use it with Fischer FIS HB injection mortar or FHB II-P and FHB II-PF mortar capsules.

What drill diameter and drill hole depth are required?

Drill a hole with a diameter of 10 mm and a minimum depth of 75 mm.

What is the maximum fixture thickness of this anchor?

The maximum usable fixture thickness for this model is 10 mm.

Is this anchor rod approved for cracked concrete?

Yes, the system has an ETA approval for both cracked and non-cracked concrete.

What wrench size is needed for installation?

Tighten the hexagon nut using a 17 mm wrench.

FISCHER 97072 highbond anchor FHB II-A S M10 x 60/10 ev

Name: FISCHER 97072 highbond anchor FHB II-A S M10 x 60/10 ev
Brand: FISCHER
SKU: 02020175
Price: 4.83 EUR
Availability: PreOrder

Supplier number: FISCHER 97072 | EAN 4006209970720

4.83 tax incl.

€3.99 excl. VAT (incl. all environmental contributions)

On order: delivered from 10/10/2026

The minimum purchase order quantity for the product is 10.

Ordered before 20:00 - delivered as of 10/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL
Delivered from Belgium

✆ Talk to a specialist

High load capacity with the Fischer FHB II-A S M10 x 60/10

Practical benefits

Reduced drilling depth required: With a low anchorage depth of 60 mm, you reduce drilling effort and installation time in cracked concrete.
Ideal for narrow edges: The optimized cone geometry allows you to achieve secure fixations even with small edge and axial spacings.
Flexible through-type installation: You can complete both pre-positioned and push-through installations seamlessly using compatible mortar or capsules.

In a nutshell

The right choise for

With the Fischer fhb ii-a s M10 x 60/10, you can secure heavy loads reliably in cracked and non-cracked concrete. Thanks to the shallow embedment depth of 60 mm and a drill hole depth of 75 mm, you reduce drilling effort and save valuable installation time. Its optimized cone geometry distributes forces without expansion pressure, allowing you to anchor close to concrete edges or in thin slabs. Suitable for pre-positioned and push-through installations, it pairs smoothly with Fischer fis hb injection mortar or fhb ii-p capsules. Fasten steel constructions, machinery bases, or railings up to 10 mm thick quickly and solidly using a 17 mm wrench.

Product information FAQ

€4.83

tax incl.

Key features according to our expert

Wire dimension: 10 mm
Anchoring depth: 60 mm
Width across flats: 17 mm
Effective length: 10 mm
Drill hole depth: 75 mm
Drilling diameter: 10 mm

Product description

The best performance in cracked concrete with the least installation effort.

The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas.

Reduces anchorage depth, lowers expense when drilling and installing. This saves costs
Through-type installations without additional aids. This saves time
Optimised for low axial and edge distances in cracked concrete
No drill hole cleaning is required when using a resin capsule. This saves time
ETA approval for cracked concrete
The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing
With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required
The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications
The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application

Suitable for

The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation
With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

Concrete C12/15

Application

Suitable for:

Guard rails
Façades
Staircases
Steel brackets
Masts
Rash protection
Steelwork constructions
Timber constructions

Ideal for:

Push-through installation

All Features

Wire dimension: 10 mm
Anchoring depth: 60 mm
Width across flats: 17 mm
Effective length: 10 mm
Drill hole depth: 75 mm
Drilling diameter: 10 mm
Drill diameter: 10 mm
Dished mortar: 3
Terms of use: Predominantly static loads
Max. attachment thickness: 10 mm
Thread size (metric): 10 mm
Length: 96 mm
Key width: 17 mm
Material: electrolytically galvanised steel
Wire: 10 mm
With mortar pattern: No

Brand FISCHER
02020175
EAN 4006209970720
Supplier number FISCHER 97072

Frequently asked questions about this product

Answered by specialists

Which mortar is suitable for this anchor rod?: You can use it with Fischer FIS HB injection mortar or FHB II-P and FHB II-PF mortar capsules.
What drill diameter and drill hole depth are required?: Drill a hole with a diameter of 10 mm and a minimum depth of 75 mm.
What is the maximum fixture thickness of this anchor?: The maximum usable fixture thickness for this model is 10 mm.
Is this anchor rod approved for cracked concrete?: Yes, the system has an ETA approval for both cracked and non-cracked concrete.
What wrench size is needed for installation?: Tighten the hexagon nut using a 17 mm wrench.