r: 02137038 p: 25.47 pid: 176203 b: FISCHER q: 0 st: lt: 8 ean: 4006209502624 sr: FISCHER 50262 sr_no_br: 50262 sr_no_br_cl: 50262 sr_cl: FISCHER50262 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 30 mm Length 380 mm n: FISCHER 50262 anchor rod RG M30 x 380 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M30 x 380 electrolytically zinc-plated 5.8 kpn: 50262 kpn_dash: kpn_clear: 50262 bkpn: FISCHER 50262 bkpn_clear: FISCHER 50262 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50262 sr_ns: FISCHER50262
r: 02020747 p: 23.57 pid: 12906 b: FISCHER q: 0 st: lt: 8 ean: 4006209920404 sr: FISCHER 92040 sr_no_br: 92040 sr_no_br_cl: 92040 sr_cl: FISCHER92040 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 130 mm Width across flats 24 mm Effective length 10 - 50 mm Drill hole depth 100 mm Drilling diameter 18 mm n: FISCHER 92040 highbond anchor FHB-A dynamic 16 x 125/50 V cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors - with a stronger sleeve The fischer Highbond anchor dynamic FHB-A dyn V is made of zinc-plated steel. The anchor rod is reinforced on the shaft with a sleeve in order to bear the highest transverse forces. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn V is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Absorption of highest shear loads. Additional sleeves offer maximum safety Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 16 x 125/50 V kpn: 92040 kpn_dash: kpn_clear: 92040 bkpn: FISCHER 92040 bkpn_clear: FISCHER 92040 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92040 sr_ns: FISCHER92040
r: 02020565 p: 22.61 pid: 17094 b: FISCHER q: 0 st: lt: 8 ean: 4006209976432 sr: FISCHER 97643 sr_no_br: 97643 sr_no_br_cl: 97643 sr_cl: FISCHER97643 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 95 mm Width across flats 24 mm Effective length 100 mm Drill hole depth 110 mm Drilling diameter 16 mm n: FISCHER 97643 highbond anchor FHB II-A S M16 x 95/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M16 x 95/100 stainless steel A4 kpn: 97643 kpn_dash: kpn_clear: 97643 bkpn: FISCHER 97643 bkpn_clear: FISCHER 97643 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97643 sr_ns: FISCHER97643
r: 02020603 p: 22.19 pid: 17111 b: FISCHER q: 0 st: lt: 8 ean: 4006209976241 sr: FISCHER 97624 sr_no_br: 97624 sr_no_br_cl: 97624 sr_cl: FISCHER97624 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 60 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 97624 highbond anchor FHB II-A L M12 x 120/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/60 stainless steel A4 kpn: 97624 kpn_dash: kpn_clear: 97624 bkpn: FISCHER 97624 bkpn_clear: FISCHER 97624 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97624 sr_ns: FISCHER97624
r: 02020558 p: 21.01 pid: 17090 b: FISCHER q: 0 st: lt: 8 ean: 4006209976401 sr: FISCHER 97640 sr_no_br: 97640 sr_no_br_cl: 97640 sr_cl: FISCHER97640 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 165 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97640 highbond anchor FHB II-A S M12 x 75/165 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/165 stainless steel A4 kpn: 97640 kpn_dash: kpn_clear: 97640 bkpn: FISCHER 97640 bkpn_clear: FISCHER 97640 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97640 sr_ns: FISCHER97640
r: 02020602 p: 20.92 pid: 17107 b: FISCHER q: 0 st: lt: 8 ean: 4006209976234 sr: FISCHER 97623 sr_no_br: 97623 sr_no_br_cl: 97623 sr_cl: FISCHER97623 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 40 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 97623 highbond anchor FHB II-A L M12 x 120/40 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/40 stainless steel A4 kpn: 97623 kpn_dash: kpn_clear: 97623 bkpn: FISCHER 97623 bkpn_clear: FISCHER 97623 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97623 sr_ns: FISCHER97623
r: 02020222 p: 20.64 pid: 95044 b: FISCHER q: 0 st: lt: 8 ean: 4006209970713 sr: FISCHER 97071 sr_no_br: 97071 sr_no_br_cl: 97071 sr_cl: FISCHER97071 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 20 mm Length 210 mm Anchoring depth 210 mm Width across flats 30 mm Effective length 50 mm Drill hole depth 235 mm Drilling diameter 25 mm n: FISCHER 97071 highbond anchor FHB II-A L M20 x 210/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M20 x 210/50 ev kpn: 97071 kpn_dash: kpn_clear: 97071 bkpn: FISCHER 97071 bkpn_clear: FISCHER 97071 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97071 sr_ns: FISCHER97071
r: 02137036 p: 20.46 pid: 176196 b: FISCHER q: 0 st: lt: 8 ean: 4006209907207 sr: FISCHER 90720 sr_no_br: 90720 sr_no_br_cl: 90720 sr_cl: FISCHER90720 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 27 mm Length 340 mm n: FISCHER 90720 anchor rod RG M27 x 340 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M27 x 340 electrolytically zinc-plated 5.8 kpn: 90720 kpn_dash: kpn_clear: 90720 bkpn: FISCHER 90720 bkpn_clear: FISCHER 90720 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90720 sr_ns: FISCHER90720
r: 02020742 p: 19.34 pid: 12901 b: FISCHER q: 0 st: lt: 8 ean: 4006209920367 sr: FISCHER 92036 sr_no_br: 92036 sr_no_br_cl: 92036 sr_cl: FISCHER92036 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 125 mm Width across flats 24 mm Effective length 10 - 50 mm Drill hole depth 180 mm Drilling diameter 18 mm n: FISCHER 92036 highbond anchor FHB-A dynamic 16 x 125/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 16 x 125/50 ev kpn: 92036 kpn_dash: kpn_clear: 92036 bkpn: FISCHER 92036 bkpn_clear: FISCHER 92036 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92036 sr_ns: FISCHER92036
r: 02020601 p: 19.28 pid: 16171 b: FISCHER q: 0 st: lt: 8 ean: 4006209976227 sr: FISCHER 97622 sr_no_br: 97622 sr_no_br_cl: 97622 sr_cl: FISCHER97622 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 25 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 97622 highbond anchor FHB II-A L M12 x 120/25 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/25 stainless steel A4 kpn: 97622 kpn_dash: kpn_clear: 97622 bkpn: FISCHER 97622 bkpn_clear: FISCHER 97622 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97622 sr_ns: FISCHER97622
r: 02020221 p: 19.14 pid: 94559 b: FISCHER q: 0 st: lt: 8 ean: 4006209970706 sr: FISCHER 97070 sr_no_br: 97070 sr_no_br_cl: 97070 sr_cl: FISCHER97070 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Length 160 mm Anchoring depth 160 mm Width across flats 24 mm Effective length 100 mm Drill hole depth 175 mm Drilling diameter 18 mm n: FISCHER 97070 highbond anchor FHB II-A L M16 x 160/100 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M16 x 160/100 ev kpn: 97070 kpn_dash: kpn_clear: 97070 bkpn: FISCHER 97070 bkpn_clear: FISCHER 97070 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97070 sr_ns: FISCHER97070
r: 02020200 p: 19.14 pid: 96813 b: FISCHER q: 0 st: lt: 8 ean: 4006209972977 sr: FISCHER 97297 sr_no_br: 97297 sr_no_br_cl: 97297 sr_cl: FISCHER97297 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 24 mm Length 170 mm Anchoring depth 170 mm Width across flats 36 mm Effective length 50 mm Drill hole depth 190 mm Drilling diameter 25 mm n: FISCHER 97297 highbond anchor FHB II-A S M24 x 170/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M24 x 170/50 ev kpn: 97297 kpn_dash: kpn_clear: 97297 bkpn: FISCHER 97297 bkpn_clear: FISCHER 97297 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97297 sr_ns: FISCHER97297
r: 02020596 p: 18.63 pid: 16005 b: FISCHER q: 0 st: lt: 8 ean: 4006209976210 sr: FISCHER 97621 sr_no_br: 97621 sr_no_br_cl: 97621 sr_cl: FISCHER97621 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 10 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 97621 highbond anchor FHB II-A L M12 x 120/10 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/10 stainless steel A4 kpn: 97621 kpn_dash: kpn_clear: 97621 bkpn: FISCHER 97621 bkpn_clear: FISCHER 97621 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97621 sr_ns: FISCHER97621
r: 02020559 p: 17.63 pid: 96446 b: FISCHER q: 0 st: lt: 8 ean: 4006209976418 sr: FISCHER 97641 sr_no_br: 97641 sr_no_br_cl: 97641 sr_cl: FISCHER97641 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Anchoring depth 95 mm Width across flats 24 mm Effective length 30 mm Drill hole depth 110 mm Drilling diameter 16 mm n: FISCHER 97641 highbond anchor FHB II-A S M16 x 95/30 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M16 x 95/30 stainless steel A4 kpn: 97641 kpn_dash: kpn_clear: 97641 bkpn: FISCHER 97641 bkpn_clear: FISCHER 97641 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97641 sr_ns: FISCHER97641
r: 02137076 p: 16.87 pid: 21597 b: FISCHER q: 0 st: lt: 8 ean: 4006209502679 sr: FISCHER 50267 sr_no_br: 50267 sr_no_br_cl: 50267 sr_cl: FISCHER50267 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 20 mm Length 260 mm Material Stainless steel A4 Drilling diameter 25 mm n: FISCHER 50267 anchor rod RG M20 x 260 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M20 x 260 R stainless steel kpn: 50267 kpn_dash: kpn_clear: 50267 bkpn: FISCHER 50267 bkpn_clear: FISCHER 50267 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50267 sr_ns: FISCHER50267
r: 02020557 p: 15.94 pid: 17482 b: FISCHER q: 0 st: lt: 8 ean: 4006209976395 sr: FISCHER 97639 sr_no_br: 97639 sr_no_br_cl: 97639 sr_cl: FISCHER97639 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 100 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97639 highbond anchor FHB II-A S M12 x 75/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/100 stainless steel A4 kpn: 97639 kpn_dash: kpn_clear: 97639 bkpn: FISCHER 97639 bkpn_clear: FISCHER 97639 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97639 sr_ns: FISCHER97639
r: 02020737 p: 14.88 pid: 12898 b: FISCHER q: 0 st: lt: 8 ean: 4006209920190 sr: FISCHER 92019 sr_no_br: 92019 sr_no_br_cl: 92019 sr_cl: FISCHER92019 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 100 mm Width across flats 19 mm Effective length 8 - 50 mm Drill hole depth 155 mm Drilling diameter 14 mm n: FISCHER 92019 highbond anchor FHB-A dynamic 12 x 100/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The highest performance in class amongst dynamic anchors The fischer Highbond anchor dynamic FHB-A dyn is made of zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas. Controlled expansion under dynamic stress due to cone shape Absorption of dynamic alternating loads via optimum load distribution Approved for cracked concrete The Highbond-anchor dynamic FHB-A dyn must be applied in combination with the Highbond-mortar FIS HB During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and ensures optimum load distribution. This allows for the absorption of dynamic alternating loads The cone shape of the FHB-A dyn anchor rod ensures a controlled expansion under dynamic stress, thus allowing for use in cracked concrete The anchor rod FHB-A dyn is also available made from high corrosion-resistant steel. This makes it suitable for use in aggressive atmospheres, for example in tunnels The Highbond anchor dynamic system can achieve even greater shear loads thanks to the additional sleeve of the anchor rod FHB-A dyn V, and therefore provides an increased level of safety The ETA for static and quasi-static loads allows the use of sizes M12 and M16 also for the anchoring base steel fiber concrete Suitable for The injection system suitable for tensile zones consists of the Highbond dynamic anchor rod FHB-A dyn and the injection mortar FIS HB FHB dyn is approved for pre-positioned and push-through installation Extruding the mortar causes the two components to be mixed and activated in the static mixer The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole The centring sleeve centres the anchor in the fixture, thus ensuring a safe load application The lock nut prevents the nut from becoming loose Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Steel fiber reinforced concrete (M12 / M16) Application Jib cranes Gantry and overhead cranes Guide rails for elevators Tunnel ventilators (jet fans) Gantries in road construction Antennas and transmitter masts Industrial robots ds: dsc: kts: highbond anchor FHB-A dynamic 12 x 100/50 ev kpn: 92019 kpn_dash: kpn_clear: 92019 bkpn: FISCHER 92019 bkpn_clear: FISCHER 92019 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 92019 sr_ns: FISCHER92019
r: 02020219 p: 13.72 pid: 17467 b: FISCHER q: 0 st: lt: 8 ean: 4006209970355 sr: FISCHER 97035 sr_no_br: 97035 sr_no_br_cl: 97035 sr_cl: FISCHER97035 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 16 mm Length 160 mm Anchoring depth 160 mm Width across flats 24 mm Effective length 30 mm Drill hole depth 175 mm Drilling diameter 18 mm n: FISCHER 97035 highbond anchor FHB II-A L M16 x 160/30 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M16 x 160/30 ev kpn: 97035 kpn_dash: kpn_clear: 97035 bkpn: FISCHER 97035 bkpn_clear: FISCHER 97035 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97035 sr_ns: FISCHER97035
r: 02020576 p: 13.44 pid: 16003 b: FISCHER q: 0 st: lt: 8 ean: 4006209976197 sr: FISCHER 97619 sr_no_br: 97619 sr_no_br_cl: 97619 sr_cl: FISCHER97619 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 60 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 97619 highbond anchor FHB II-A L M10 x 95/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/60 stainless steel A4 kpn: 97619 kpn_dash: kpn_clear: 97619 bkpn: FISCHER 97619 bkpn_clear: FISCHER 97619 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97619 sr_ns: FISCHER97619
r: 02020545 p: 13.28 pid: 17078 b: FISCHER q: 0 st: lt: 8 ean: 4006209976340 sr: FISCHER 97634 sr_no_br: 97634 sr_no_br_cl: 97634 sr_cl: FISCHER97634 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 100 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97634 highbond anchor FHB II-A S M10 x 60/100 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/100 stainless steel A4 kpn: 97634 kpn_dash: kpn_clear: 97634 bkpn: FISCHER 97634 bkpn_clear: FISCHER 97634 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97634 sr_ns: FISCHER97634
