r: 02890545 p: 0.64 pid: 176058 b: FISCHER q: 0 st: lt: 12 ean: 4006209902752 sr: FISCHER 90275 sr_no_br: 90275 sr_no_br_cl: 90275 sr_cl: FISCHER90275 sr_dash: sold: 32 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 110 mm n: FISCHER 90275 anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8 kpn: 90275 kpn_dash: kpn_clear: 90275 bkpn: FISCHER 90275 bkpn_clear: FISCHER 90275 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90275 sr_ns: FISCHER90275
r: 87050182 p: 1.59 pid: 176414 b: FISCHER q: 0 st: lt: 10 ean: 4006209502839 sr: FISCHER 50283 sr_no_br: 50283 sr_no_br_cl: 50283 sr_cl: FISCHER50283 sr_dash: sold: 31.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 220 mm n: FISCHER 50283 anchor rod RG M12 x 220 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M12 x 220 electrolytically zinc-plated 5.8 kpn: 50283 kpn_dash: kpn_clear: 50283 bkpn: FISCHER 50283 bkpn_clear: FISCHER 50283 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50283 sr_ns: FISCHER50283
r: 87960075 p: 0.62 pid: 17542 b: FISCHER q: 0 st: lt: 10 ean: 4006209901625 sr: FISCHER 90162 sr_no_br: 90162 sr_no_br_cl: 90162 sr_cl: FISCHER90162 sr_dash: sold: 31 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER EA M12 N impact anchor - 90162 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion. Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Suitable for The EA N is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer The setting tool EA-ST is then used to expand the sleeve against the drill hole wall by driving in the internal pin The setting tools must sit on the edge of the anchor to ensure correct expansion Building materials Concrete C12/15, non-cracked Concrete C20/25, non-cracked Application Pipelines Cable trays Consoles ds: dsc: kts: impact anchor kpn: EA M12 N kpn_dash: kpn_clear: EAM12N bkpn: FISCHER EA M12 N bkpn_clear: FISCHER EAM12N c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90162 sr_ns: FISCHER90162
r: 02891164 p: 1 pid: 176066 b: FISCHER q: 88 st: 1 lt: 1 ean: 4048962324471 sr: FISCHER 545853 sr_no_br: 545853 sr_no_br_cl: 545853 sr_cl: FISCHER545853 sr_dash: sold: 30 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 545853 mixing nozzle FIS MR Plus for instant mortars cn: MIXING NOZZLE cn2: MIXING NOZZLE cn_clear: MIXINGNOZZLE d: Product description Static mixer for fischer injection mortar provides forced mixing of hardening agent and resin components. The fischer static mixer FIS MR Plus is screwed onto fischer injection cartridges and ensures safe, homogeneous mixing of both mortar components during extrusion from the cartridge. Ensures safe mixing of hardening agent and resin components during application With suitable screw connection for the cartridge The fischer static mixers are ideally adapted to the fischer injection mortars The static mixer provides for a homogeneus mixing of the mortar components and thus allows for a secure application of the fischer injection mortars Suitable for When being injected, the two components of the injection mortar are squeezed through the static mixer and thus activated The mixing spiral thereby ensures the homogeneous mixing of resin and hardener Do not use static mixers without mixing spiral! Building materials All building materials in which injection mortars are used Application Mixing and activation of the fischer injection mortar ds: dsc: Scope of delivery (per purchase of 10) 10x mixing nozzle FIS MR Plus kts: mixing nozzle FIS MR Plus for instant mortars kpn: 545853 kpn_dash: kpn_clear: 545853 bkpn: FISCHER 545853 bkpn_clear: FISCHER 545853 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Mixing nozzle | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer mixing nozzle sr_no_br_cl_ns: 545853 sr_ns: FISCHER545853
r: 87051412 p: 0.6 pid: 16050 b: FISCHER q: 0 st: lt: 8 ean: 4006209685211 sr: FISCHER 68521 sr_no_br: 68521 sr_no_br_cl: 68521 sr_cl: FISCHER68521 sr_dash: sold: 30 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 89 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 8 mm n: FISCHER FSA 8x85/40 S sleeve anchor with hex bolt electrolytically zinc plated - 68521 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 8x85/40 S kpn_dash: kpn_clear: FSA8x8540S bkpn: FISCHER FSA 8x85/40 S bkpn_clear: FISCHER FSA8x8540S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68521 sr_ns: FISCHER68521
r: 08096918 p: 1.48 pid: 176303 b: FISCHER q: 240 st: 1 lt: 1 ean: 4048962462128 sr: FISCHER 564587 sr_no_br: 564587 sr_no_br_cl: 564587 sr_cl: FISCHER564587 sr_dash: sold: 29.6 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20 mm Overall length 120 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564587 Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel kpn: 564587 kpn_dash: kpn_clear: 564587 bkpn: FISCHER 564587 bkpn_clear: FISCHER 564587 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564587 sr_ns: FISCHER564587
r: 22065400 p: 2.79 pid: 176362 b: FISCHER q: 0 st: lt: 8 ean: 4006209436332 sr: FISCHER 43633 sr_no_br: 43633 sr_no_br_cl: 43633 sr_cl: FISCHER43633 sr_dash: sold: 27.9 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Quantity per blister 10 n: FISCHER 43633 female threaded anchor FIS E 15 x 85 M10 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M10 kpn: 43633 kpn_dash: kpn_clear: 43633 bkpn: FISCHER 43633 bkpn_clear: FISCHER 43633 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43633 sr_ns: FISCHER43633
r: 02019139 p: 1.3 pid: 10550 b: FISCHER q: 0 st: lt: 8 ean: 4006209685280 sr: FISCHER 68528 sr_no_br: 68528 sr_no_br_cl: 68528 sr_cl: FISCHER68528 sr_dash: sold: 26 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 116 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x110/50 S sleeve anchor with hex bolt electrolytically zinc plated - 68528 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 12x110/50 S kpn_dash: kpn_clear: FSA12x11050S bkpn: FISCHER FSA 12x110/50 S bkpn_clear: FISCHER FSA12x11050S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68528 sr_ns: FISCHER68528
r: 02019406 p: 0.46 pid: 10622 b: FISCHER q: 0 st: lt: 8 ean: 4006209483329 sr: FISCHER 48332 sr_no_br: 48332 sr_no_br_cl: 48332 sr_cl: FISCHER48332 sr_dash: sold: 23 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 30 mm Drilling diameter 12 mm n: FISCHER EA II M10x30 weft anchor zinc plated - 48332 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M10x30 kpn_dash: kpn_clear: EAIIM10x30 bkpn: FISCHER EA II M10x30 bkpn_clear: FISCHER EAIIM10x30 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48332 sr_ns: FISCHER48332
r: 02019162 p: 0.53 pid: 10560 b: FISCHER q: 0 st: lt: 8 ean: 4006209685037 sr: FISCHER 68503 sr_no_br: 68503 sr_no_br_cl: 68503 sr_cl: FISCHER68503 sr_dash: sold: 21.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 69 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x55/10 B sleeve anchor with nut electrolytically zinc plated - 68503 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 10x55/10 B kpn_dash: kpn_clear: FSA10x5510B bkpn: FISCHER FSA 10x55/10 B bkpn_clear: FISCHER FSA10x5510B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68503 sr_ns: FISCHER68503
r: 02019169 p: 0.92 pid: 11053 b: FISCHER q: 0 st: lt: 8 ean: 4006209685075 sr: FISCHER 68507 sr_no_br: 68507 sr_no_br_cl: 68507 sr_cl: FISCHER68507 sr_dash: sold: 18.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 96 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x80/25 B sleeve anchor with nut electrolytically zinc plated - 68507 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x80/25 B kpn_dash: kpn_clear: FSA12x8025B bkpn: FISCHER FSA 12x80/25 B bkpn_clear: FISCHER FSA12x8025B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68507 sr_ns: FISCHER68507
r: 02827236 p: 1.7 pid: 175999 b: FISCHER q: 0 st: lt: 8 ean: 4048962271782 sr: FISCHER 539799 sr_no_br: 539799 sr_no_br_cl: 539799 sr_cl: FISCHER539799 sr_dash: sold: 17 p_range: none type: standard act: 1 avo: 1 av: For diameter 14 mm Principal hazard property GHS09 Environmental hazard Packaging Cartridge ADR class UN number ADR packing group EUH-statements EUH208 Conseils de prudence (P) P280 H-statements H411 Hazard class GHS09 Environmental hazard Physical state Solid Flash point > 100 °C n: FISCHER 539799 chemical anchor capsule RM II 14 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 14 kpn: 539799 kpn_dash: kpn_clear: 539799 bkpn: FISCHER 539799 bkpn_clear: FISCHER 539799 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539799 sr_ns: FISCHER539799
r: 02019167 p: 0.79 pid: 10855 b: FISCHER q: 0 st: lt: 8 ean: 4006209685068 sr: FISCHER 68506 sr_no_br: 68506 sr_no_br_cl: 68506 sr_cl: FISCHER68506 sr_dash: sold: 15.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 81 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x65/10 B sleeve anchor with nut electrolytically zinc plated - 68506 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x65/10 B kpn_dash: kpn_clear: FSA12x6510B bkpn: FISCHER FSA 12x65/10 B bkpn_clear: FISCHER FSA12x6510B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68506 sr_ns: FISCHER68506
r: 87050180 p: 1.19 pid: 176400 b: FISCHER q: 40 st: 1 lt: 1 ean: 4006209502587 sr: FISCHER 50258 sr_no_br: 50258 sr_no_br_cl: 50258 sr_cl: FISCHER50258 sr_dash: sold: 11.9 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 160 mm n: FISCHER 50258 anchor rod RG M12 x 160 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M12 x 160 electrolytically zinc-plated 5.8 kpn: 50258 kpn_dash: kpn_clear: 50258 bkpn: FISCHER 50258 bkpn_clear: FISCHER 50258 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50258 sr_ns: FISCHER50258
r: 03172700 p: 328.76 pid: 176105 b: FISCHER q: 0 st: lt: 8 ean: 4048962417623 sr: FISCHER 558757 sr_no_br: 558757 sr_no_br_cl: 558757 sr_cl: FISCHER558757 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 360 ml Principal hazard property GHS07 Harmful or irritant Flash point > 100 °C ADR class 9 UN number UN3077 ADR packing group III Conseils de prudence (P) P101; P102; P280; P501; P273; P391 H-statements H315; H317; H319; H400; H410 Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid n: FISCHER 558757 injection mortar FIS V Plus 360 S in crate (20 pcs) cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful universal mortar for concrete and masonry. The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures. ETA approval for post-installed rebar connections Injection mortar system with approval for all relevant building materials Maximum load absorption for much greater security Approved service life of 100 years Application in water-filled boreholes The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications The ETA assessment for a service life of 100 years offers permanent safety for all applications The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications Suitable for FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer The mortar is extruded bubble free from the drill hole base The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole The injection cartridges are quick and easy to use with the fischer dispensers Partially used cartridges can be reused by changing the static mixer Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick Approved for: Rebar connections Remedial wall tie VBS 8 Weather facing reconstruction system FWS II Stand-off installation TherMax Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas ds: dsc: Scope of delivery 20x Injection mortar FIS V Plus 360 S 40x mixing nozzle FIS MR PLUS kts: injection mortar FIS V Plus 360 S in crate (20 pcs) kpn: 558757 kpn_dash: kpn_clear: 558757 bkpn: FISCHER 558757 bkpn_clear: FISCHER 558757 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 558757 sr_ns: FISCHER558757
r: 03299006 p: 233.223 pid: 176215 b: FISCHER q: 0 st: lt: 8 ean: 4048962452723 sr: FISCHER 563294 sr_no_br: 563294 sr_no_br_cl: 563294 sr_cl: FISCHER563294 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml Principal hazard property GHS05 Corrosive Flash point > 100 °C ADR class 9 UN number UN3077 ADR packing group III Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338 + P310; P501 H-statements H315; H317; H318; H319; H400; H410 Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid n: FISCHER 563294 injection mortar FIS V Plus 300 T HWK large in crate (20 pcs) cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful universal mortar for concrete and masonry. The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures. ETA approval for post-installed rebar connections Injection mortar system with approval for all relevant building materials Maximum load absorption for much greater security Approved service life of 100 years Application in water-filled boreholes The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications The ETA assessment for a service life of 100 years offers permanent safety for all applications The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications Suitable for FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer The mortar is extruded bubble free from the drill hole base The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole The injection cartridges are quick and easy to use with the fischer dispensers Partially used cartridges can be reused by changing the static mixer Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick Approved for: Rebar connections Remedial wall tie VBS 8 Weather facing reconstruction system FWS II Stand-off installation TherMax Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas ds: dsc: Scope of delivery 20 Cartridges 300ml 40x FIS MR Plus mixing nozzles kts: injection mortar FIS V Plus 300 T HWK large in crate (20 pcs) kpn: 563294 kpn_dash: kpn_clear: 563294 bkpn: FISCHER 563294 bkpn_clear: FISCHER 563294 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 563294 sr_ns: FISCHER563294
r: 02137084 p: 115.77 pid: 73133 b: FISCHER q: 0 st: lt: 8 ean: 4006209907269 sr: FISCHER 90726 sr_no_br: 90726 sr_no_br_cl: 90726 sr_cl: FISCHER90726 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 30 mm Length 380 mm Material Stainless steel A4 Drilling diameter 35 mm n: FISCHER 90726 anchor rod RG M30 x 380 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M30 x 380 R stainless steel kpn: 90726 kpn_dash: kpn_clear: 90726 bkpn: FISCHER 90726 bkpn_clear: FISCHER 90726 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90726 sr_ns: FISCHER90726
r: 02137083 p: 97.17 pid: 22236 b: FISCHER q: 0 st: lt: 8 ean: 4006209907252 sr: FISCHER 90725 sr_no_br: 90725 sr_no_br_cl: 90725 sr_cl: FISCHER90725 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 27 mm Length 340 mm Material Stainless steel A4 Drilling diameter 32 mm n: FISCHER 90725 anchor rod RG M27 x 340 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M27 x 340 R stainless steel kpn: 90725 kpn_dash: kpn_clear: 90725 bkpn: FISCHER 90725 bkpn_clear: FISCHER 90725 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90725 sr_ns: FISCHER90725
r: 87051289 p: 83.16 pid: 74402 b: FISCHER q: 0 st: lt: 8 ean: 4006209607688 sr: FISCHER 60768 sr_no_br: 60768 sr_no_br_cl: 60768 sr_cl: FISCHER60768 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 22 mm Effective length 60 mm Overall length 209 mm Material (bolt) Stainless steel A4 Thread dimension M16 n: FISCHER 60768 zykon anchor FZA 22 x 125 M16/60 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON bolt anchor FZA is an anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing façades, railings, and steel constructions within external areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 22 x 125 M16/60 R stainless steel kpn: 60768 kpn_dash: kpn_clear: 60768 bkpn: FISCHER 60768 bkpn_clear: FISCHER 60768 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60768 sr_ns: FISCHER60768
r: 87051394 p: 62.68 pid: 16042 b: FISCHER q: 0 st: lt: 8 ean: 4048962015423 sr: FISCHER 502711 sr_no_br: 502711 sr_no_br_cl: 502711 sr_cl: FISCHER502711 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 24 mm Overall length 160 mm Safety anchor Yes Drilling diameter 24 mm n: FISCHER FH II 24/25 S safety anchor with hexagonal head stainless steel R - 502711 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor. Made of stainless steel with sophisticated design in cracked concrete. The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of stainless steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and railings tin external areas in cracked and non-cracked concrete. Made of stainless steel for fixings used outside The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The low profile of the screw head ensures for a discreet fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with hexagonal head stainless steel R kpn: FH II 24/25 S kpn_dash: kpn_clear: FHII2425S bkpn: FISCHER FH II 24/25 S bkpn_clear: FISCHER FHII2425S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 502711 sr_ns: FISCHER502711
