r: 02890545 p: 0.64 pid: 176058 b: FISCHER q: 0 st: lt: 12 ean: 4006209902752 sr: FISCHER 90275 sr_no_br: 90275 sr_no_br_cl: 90275 sr_cl: FISCHER90275 sr_dash: sold: 32 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 110 mm n: FISCHER 90275 anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The FIS A versatile rod anchor The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors. The universal solution for various fischer injection mortars. For a manageable range and simpler storage Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications Please refer to the approvals of the injection mortar used Suitable for The anchor rod FIS A is suitable for pre-positioned and push-through installation FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base Building materials In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials Application Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod FIS A M8 x 110 electrolytically zinc-plated 5.8 kpn: 90275 kpn_dash: kpn_clear: 90275 bkpn: FISCHER 90275 bkpn_clear: FISCHER 90275 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 90275 sr_ns: FISCHER90275
r: 87050182 p: 1.59 pid: 176414 b: FISCHER q: 0 st: lt: 10 ean: 4006209502839 sr: FISCHER 50283 sr_no_br: 50283 sr_no_br_cl: 50283 sr_cl: FISCHER50283 sr_dash: sold: 31.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 220 mm n: FISCHER 50283 anchor rod RG M12 x 220 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M12 x 220 electrolytically zinc-plated 5.8 kpn: 50283 kpn_dash: kpn_clear: 50283 bkpn: FISCHER 50283 bkpn_clear: FISCHER 50283 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50283 sr_ns: FISCHER50283
r: 87960075 p: 0.62 pid: 17542 b: FISCHER q: 0 st: lt: 10 ean: 4006209901625 sr: FISCHER 90162 sr_no_br: 90162 sr_no_br_cl: 90162 sr_cl: FISCHER90162 sr_dash: sold: 31 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER EA M12 N impact anchor - 90162 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion. Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Suitable for The EA N is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer The setting tool EA-ST is then used to expand the sleeve against the drill hole wall by driving in the internal pin The setting tools must sit on the edge of the anchor to ensure correct expansion Building materials Concrete C12/15, non-cracked Concrete C20/25, non-cracked Application Pipelines Cable trays Consoles ds: dsc: kts: impact anchor kpn: EA M12 N kpn_dash: kpn_clear: EAM12N bkpn: FISCHER EA M12 N bkpn_clear: FISCHER EAM12N c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90162 sr_ns: FISCHER90162
r: 02794981 p: 0.61 pid: 176005 b: FISCHER q: 0 st: lt: 4 ean: 4048962254075 sr: FISCHER 537258 sr_no_br: 537258 sr_no_br_cl: 537258 sr_cl: FISCHER537258 sr_dash: sold: 30.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application Construction board Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 50 mm n: FISCHER 537258 Hollow wall plug DuoTec 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description Easy to install nylon toggle for high loads in all panel building materials The unique function and toggle geometry of the fischer DuoTec allows it to handle very heavy loads for a gravity toggle. Where multiple fixings are required, this reduces the number of fixings and maximises security. As a member of the DUO line, the fischer DuoTec comprises two plastic components. The red and hard component of the plug sleeve facilitates the consistent distribution of the load, while the grey and soft component prevents damage to the panel's surface by the fixing, reducing the load. The fischer DuoTec is set like a gravity toggle for applications in panel building materials. The toggle can also be used as an expansion plug in solid building materials. Combination of two material components for more performance Use of chipboard screws, hooks with fastening and screws with metric threads Flush sleeve strengthens the drill hole and allows considerably higher transverse loads Curved handle allows obstacles to be identified before installation Flexible screw mount allows for the use of screws and hooks with different thread shapes Glass fibre-reinforced plastics and a metal skeleton insert (fischer DuoTec 12) allow the toggle to handle heavy tensile and transverse loads in all panel building materials Soft grey nylon contact surface distributes the load over the panel surface, thereby minimising weakening of the supporting building material Standard drill hole diameters and short tilting element for easy installation in narrow cavities, including cavities with insulation White flush sleeve with snap function allows the plug to be pre-installed quickly and securely in the drill hole With scale on the grip strap (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm) Suitable for The fischer DuoTec is designed for pre-positioned installation Simple installation with a standard diameter 10 or 12 mm drill bit The short toggle element makes it suitable for narrow and even with mineral wool insulated cavities. Note the length of the toggle element! Functions like an expansion plug in solid building materials such as concrete or wood. Note, not with metric screws! Flexible screw insert allows for the use of wood, chipboard and metric screws and hooks Building materials Suitable for: Gypsum plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF sheets Steel plates Plastic boards Hollow blocks made from concrete Also functioning in: Solid materials, such as concrete and wood Application Kitchen hanging cabinets Living room cabinets Shelves Wardrobes Handrails Pictures Mirrors Lamps Heavy hanging baskets ds: dsc: kts: Hollow wall plug DuoTec 10 kpn: 537258 kpn_dash: kpn_clear: 537258 bkpn: FISCHER 537258 bkpn_clear: FISCHER 537258 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537258 sr_ns: FISCHER537258
r: 02891164 p: 1 pid: 176066 b: FISCHER q: 88 st: 1 lt: 1 ean: 4048962324471 sr: FISCHER 545853 sr_no_br: 545853 sr_no_br_cl: 545853 sr_cl: FISCHER545853 sr_dash: sold: 30 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 545853 mixing nozzle FIS MR Plus for instant mortars cn: MIXING NOZZLE cn2: MIXING NOZZLE cn_clear: MIXINGNOZZLE d: Product description Static mixer for fischer injection mortar provides forced mixing of hardening agent and resin components. The fischer static mixer FIS MR Plus is screwed onto fischer injection cartridges and ensures safe, homogeneous mixing of both mortar components during extrusion from the cartridge. Ensures safe mixing of hardening agent and resin components during application With suitable screw connection for the cartridge The fischer static mixers are ideally adapted to the fischer injection mortars The static mixer provides for a homogeneus mixing of the mortar components and thus allows for a secure application of the fischer injection mortars Suitable for When being injected, the two components of the injection mortar are squeezed through the static mixer and thus activated The mixing spiral thereby ensures the homogeneous mixing of resin and hardener Do not use static mixers without mixing spiral! Building materials All building materials in which injection mortars are used Application Mixing and activation of the fischer injection mortar ds: dsc: Scope of delivery (per purchase of 10) 10x mixing nozzle FIS MR Plus kts: mixing nozzle FIS MR Plus for instant mortars kpn: 545853 kpn_dash: kpn_clear: 545853 bkpn: FISCHER 545853 bkpn_clear: FISCHER 545853 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Mixing nozzle | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer mixing nozzle sr_no_br_cl_ns: 545853 sr_ns: FISCHER545853
r: 87051412 p: 0.6 pid: 16050 b: FISCHER q: 0 st: lt: 8 ean: 4006209685211 sr: FISCHER 68521 sr_no_br: 68521 sr_no_br_cl: 68521 sr_cl: FISCHER68521 sr_dash: sold: 30 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 89 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 8 mm n: FISCHER FSA 8x85/40 S sleeve anchor with hex bolt electrolytically zinc plated - 68521 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 8x85/40 S kpn_dash: kpn_clear: FSA8x8540S bkpn: FISCHER FSA 8x85/40 S bkpn_clear: FISCHER FSA8x8540S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68521 sr_ns: FISCHER68521
r: 08096918 p: 1.48 pid: 176303 b: FISCHER q: 240 st: 1 lt: 1 ean: 4048962462128 sr: FISCHER 564587 sr_no_br: 564587 sr_no_br_cl: 564587 sr_cl: FISCHER564587 sr_dash: sold: 29.6 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20 mm Overall length 120 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564587 Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/20 EV electrolytically galvanised steel kpn: 564587 kpn_dash: kpn_clear: 564587 bkpn: FISCHER 564587 bkpn_clear: FISCHER 564587 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564587 sr_ns: FISCHER564587
r: 02824727 p: 0.059 pid: 176011 b: FISCHER q: 0 st: lt: 8 ean: 4048962293258 sr: FISCHER 541894 sr_no_br: 541894 sr_no_br_cl: 541894 sr_cl: FISCHER541894 sr_dash: sold: 29.5 p_range: none type: standard act: 1 avo: 1 av: Length 30 mm n: FISCHER 541894 clamping sleeve FNH 6 x 30 cn: CLAMPING SLEEVE cn2: CLAMPING SLEEVE cn_clear: CLAMPINGSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 6 x 30 kpn: 541894 kpn_dash: kpn_clear: 541894 bkpn: FISCHER 541894 bkpn_clear: FISCHER 541894 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541894 sr_ns: FISCHER541894
r: 22065400 p: 2.79 pid: 176362 b: FISCHER q: 0 st: lt: 8 ean: 4006209436332 sr: FISCHER 43633 sr_no_br: 43633 sr_no_br_cl: 43633 sr_cl: FISCHER43633 sr_dash: sold: 27.9 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Quantity per blister 10 n: FISCHER 43633 female threaded anchor FIS E 15 x 85 M10 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M10 kpn: 43633 kpn_dash: kpn_clear: 43633 bkpn: FISCHER 43633 bkpn_clear: FISCHER 43633 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43633 sr_ns: FISCHER43633
r: 02316679 p: 1.37 pid: 21818 b: FISCHER q: 0 st: lt: 20 ean: 4006209808405 sr: FISCHER 80840 sr_no_br: 80840 sr_no_br_cl: 80840 sr_cl: FISCHER80840 sr_dash: sold: 27.4 p_range: none type: standard act: 1 avo: 1 av: Eye diameter 20 mm Thread dimension M8 Material Steel Surface treatment Electrogalvanised Standard DIN 582 n: FISCHER 80840 eye nut RI M 8 cn: EYE NUT cn2: EYE NUT cn_clear: EYENUT d: Product description The ring nut for all fixings with threaded bolts. The fischer ring nut RI is the ring nut for all fixings with threaded bolts. Due to the metric internal thread, the ring nut RI can be used flexibly with a wide range of steel anchors or threaded rods. Ropes and chains are secured with it, as well as climbing scaffolds, clothes lines, or hanging baskets. The ring nut can be used in cracked and non-cracked concrete, and also in solid and hollow building materials in line with the anchor used. High flexibility due to using a variety of steel anchors and threaded rods Simple to assemble The metric internal thread gives the ring nut RI flexibility and means it can be used with a range of steel anchors or threaded rods; e. g. FH II, FHB II-A, RG M, FZA, FAZ II Plus, FIS A Suitable for The ring nut is to be used with an anchor with threaded studs. Detailed information about its functioning can be found in the "High performance steel anchors" and "Chemical fixings" chapters. The following anchors, for example, can be used: FHB II, RG M, FZA, FAZ II Plus, FIS A Not suitable for swings, hammocks etc Building materials In line with the anchor used: Concrete, cracked and non-cracked Solid and perforated brick Application Ropes Chains Trellises Lighting Clothes lines Hanging baskets ds: dsc: kts: eye nut RI M 8 kpn: 80840 kpn_dash: kpn_clear: 80840 bkpn: FISCHER 80840 bkpn_clear: FISCHER 80840 c_path: Home / Fasteners and machine components / Fasteners / Nuts / Eye nut | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer nuts / Fischer eye nut sr_no_br_cl_ns: 80840 sr_ns: FISCHER80840
r: 08134124 p: 0.68 pid: 176374 b: FISCHER q: 0 st: lt: 8 ean: 4048962254099 sr: FISCHER 537260 sr_no_br: 537260 sr_no_br_cl: 537260 sr_cl: FISCHER537260 sr_dash: sold: 27.2 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 537260 Hollow wall plug DuoTec 10 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the even distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard, Gypsum fibreboard, Wooden panels (e.g. OSB, chipboard, MDF, etc.), Steel sheet, Plastic sheets, Hollow concrete building block Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 10 kpn: 537260 kpn_dash: kpn_clear: 537260 bkpn: FISCHER 537260 bkpn_clear: FISCHER 537260 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537260 sr_ns: FISCHER537260
r: 02019139 p: 1.3 pid: 10550 b: FISCHER q: 0 st: lt: 8 ean: 4006209685280 sr: FISCHER 68528 sr_no_br: 68528 sr_no_br_cl: 68528 sr_cl: FISCHER68528 sr_dash: sold: 26 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 116 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x110/50 S sleeve anchor with hex bolt electrolytically zinc plated - 68528 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 12x110/50 S kpn_dash: kpn_clear: FSA12x11050S bkpn: FISCHER FSA 12x110/50 S bkpn_clear: FISCHER FSA12x11050S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68528 sr_ns: FISCHER68528
r: 02316685 p: 1.29 pid: 20232 b: FISCHER q: 0 st: lt: 8 ean: 4006209801888 sr: FISCHER 80188 sr_no_br: 80188 sr_no_br_cl: 80188 sr_cl: FISCHER80188 sr_dash: sold: 25.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 130 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw No Application Construction board type (screw head) Drilling diameter 16 mm n: FISCHER 80188 KDH 5 tumbler plug cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing with hook and wide transition beams for different board thicknesses. With the fischer toggle fixing KD components such as lights can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long thread. Use with various panel thicknesses and attachment thicknesses No installation tool necessary With hook Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: KDH 5 tumbler plug kpn: 80188 kpn_dash: kpn_clear: 80188 bkpn: FISCHER 80188 bkpn_clear: FISCHER 80188 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 80188 sr_ns: FISCHER80188
r: 02019406 p: 0.46 pid: 10622 b: FISCHER q: 0 st: lt: 8 ean: 4006209483329 sr: FISCHER 48332 sr_no_br: 48332 sr_no_br_cl: 48332 sr_cl: FISCHER48332 sr_dash: sold: 23 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 30 mm Drilling diameter 12 mm n: FISCHER EA II M10x30 weft anchor zinc plated - 48332 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M10x30 kpn_dash: kpn_clear: EAIIM10x30 bkpn: FISCHER EA II M10x30 bkpn_clear: FISCHER EAIIM10x30 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48332 sr_ns: FISCHER48332
r: 02019162 p: 0.53 pid: 10560 b: FISCHER q: 0 st: lt: 8 ean: 4006209685037 sr: FISCHER 68503 sr_no_br: 68503 sr_no_br_cl: 68503 sr_cl: FISCHER68503 sr_dash: sold: 21.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 69 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x55/10 B sleeve anchor with nut electrolytically zinc plated - 68503 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 10x55/10 B kpn_dash: kpn_clear: FSA10x5510B bkpn: FISCHER FSA 10x55/10 B bkpn_clear: FISCHER FSA10x5510B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68503 sr_ns: FISCHER68503
r: 02062521 p: 0.39 pid: 11095 b: FISCHER q: 0 st: lt: 8 ean: 4006209797594 sr: FISCHER 79759 sr_no_br: 79759 sr_no_br_cl: 79759 sr_cl: FISCHER79759 sr_dash: sold: 19.5 p_range: none type: standard act: 1 avo: 1 av: Length 200 mm n: FISCHER 79759 setscrew GS 8x200 cn: THREADED STUD cn2: THREADED STUD cn_clear: THREADEDSTUD d: Product description Universal threaded pin for mounting pipes. The fischer threaded pin GS is a connection element between the fixing point in the load-bearing element and the fastening element on the suspended or elevated element. For example, pipes or ventilation ducts are fixed to it. The threaded rod is made of high-quality steel. Zinc-galvanised Simple to assemble Ideal for fischer installation systems Application For use in dry interior areas For indoor and outdoor applications and in environments with high stress to components due to corrosion ds: dsc: kts: setscrew GS 8x200 kpn: 79759 kpn_dash: kpn_clear: 79759 bkpn: FISCHER 79759 bkpn_clear: FISCHER 79759 c_path: Home / Fasteners and machine components / Fasteners / Threaded rods and threaded ends / Threaded stud | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer threaded rods and threaded ends / Fischer threaded stud sr_no_br_cl_ns: 79759 sr_ns: FISCHER79759
r: 02019169 p: 0.92 pid: 11053 b: FISCHER q: 0 st: lt: 8 ean: 4006209685075 sr: FISCHER 68507 sr_no_br: 68507 sr_no_br_cl: 68507 sr_cl: FISCHER68507 sr_dash: sold: 18.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 96 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x80/25 B sleeve anchor with nut electrolytically zinc plated - 68507 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x80/25 B kpn_dash: kpn_clear: FSA12x8025B bkpn: FISCHER FSA 12x80/25 B bkpn_clear: FISCHER FSA12x8025B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68507 sr_ns: FISCHER68507
r: 02827236 p: 1.7 pid: 175999 b: FISCHER q: 0 st: lt: 8 ean: 4048962271782 sr: FISCHER 539799 sr_no_br: 539799 sr_no_br_cl: 539799 sr_cl: FISCHER539799 sr_dash: sold: 17 p_range: none type: standard act: 1 avo: 1 av: For diameter 14 mm Principal hazard property GHS09 Environmental hazard Packaging Cartridge ADR class UN number ADR packing group EUH-statements EUH208 Conseils de prudence (P) P280 H-statements H411 Hazard class GHS09 Environmental hazard Physical state Solid Flash point > 100 °C n: FISCHER 539799 chemical anchor capsule RM II 14 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 14 kpn: 539799 kpn_dash: kpn_clear: 539799 bkpn: FISCHER 539799 bkpn_clear: FISCHER 539799 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539799 sr_ns: FISCHER539799
r: 03297787 p: 0.79 pid: 176175 b: FISCHER q: 40 st: 1 lt: 1 ean: 4048962262247 sr: FISCHER 538257 sr_no_br: 538257 sr_no_br_cl: 538257 sr_cl: FISCHER538257 sr_dash: sold: 15.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 80 mm Length (Wall plug) 80 mm n: FISCHER 538257 DuoPower 10x80 with hexagonal screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 10) 10x DuoPower 10x 80 10x hexagon screw 7.0x 107 kts: DuoPower 10x80 with hexagonal screw kpn: 538257 kpn_dash: kpn_clear: 538257 bkpn: FISCHER 538257 bkpn_clear: FISCHER 538257 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538257 sr_ns: FISCHER538257
r: 02019167 p: 0.79 pid: 10855 b: FISCHER q: 0 st: lt: 8 ean: 4006209685068 sr: FISCHER 68506 sr_no_br: 68506 sr_no_br_cl: 68506 sr_cl: FISCHER68506 sr_dash: sold: 15.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 81 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x65/10 B sleeve anchor with nut electrolytically zinc plated - 68506 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x65/10 B kpn_dash: kpn_clear: FSA12x6510B bkpn: FISCHER FSA 12x65/10 B bkpn_clear: FISCHER FSA12x6510B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68506 sr_ns: FISCHER68506
