r: 02020211 p: 10.58 pid: 17454 b: FISCHER q: 0 st: lt: 8 ean: 4006209969427 sr: FISCHER 96942 sr_no_br: 96942 sr_no_br_cl: 96942 sr_cl: FISCHER96942 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Length 95 mm Anchoring depth 95 mm Width across flats 17 mm Effective length 100 mm Drill hole depth 110 mm Drilling diameter 12 mm n: FISCHER 96942 highbond anchor FHB II-A L M10 x 95/100 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M10 x 95/100 ev kpn: 96942 kpn_dash: kpn_clear: 96942 bkpn: FISCHER 96942 bkpn_clear: FISCHER 96942 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 96942 sr_ns: FISCHER96942
r: 02020198 p: 10.56 pid: 16146 b: FISCHER q: 0 st: lt: 8 ean: 4006209972953 sr: FISCHER 97295 sr_no_br: 97295 sr_no_br_cl: 97295 sr_cl: FISCHER97295 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Length 95 mm Anchoring depth 95 mm Width across flats 24 mm Effective length 100 mm Drill hole depth 110 mm Drilling diameter 16 mm n: FISCHER 97295 highbond anchor FHB II-A S M16 x 95/100 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M16 x 95/100 ev kpn: 97295 kpn_dash: kpn_clear: 97295 bkpn: FISCHER 97295 bkpn_clear: FISCHER 97295 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97295 sr_ns: FISCHER97295
r: 02020192 p: 10.33 pid: 16139 b: FISCHER q: 0 st: lt: 8 ean: 4006209972809 sr: FISCHER 97280 sr_no_br: 97280 sr_no_br_cl: 97280 sr_cl: FISCHER97280 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 165 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 165 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97280 highbond anchor FHB II-A S M12 x 75/165 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/165 ev kpn: 97280 kpn_dash: kpn_clear: 97280 bkpn: FISCHER 97280 bkpn_clear: FISCHER 97280 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97280 sr_ns: FISCHER97280
r: 02020552 p: 10.2 pid: 17084 b: FISCHER q: 0 st: lt: 8 ean: 4006209976357 sr: FISCHER 97635 sr_no_br: 97635 sr_no_br_cl: 97635 sr_cl: FISCHER97635 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 10 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97635 highbond anchor FHB II-A S M12 x 75/10 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/10 stainless steel A4 kpn: 97635 kpn_dash: kpn_clear: 97635 bkpn: FISCHER 97635 bkpn_clear: FISCHER 97635 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97635 sr_ns: FISCHER97635
r: 08134115 p: 10.16 pid: 176337 b: FISCHER q: 0 st: lt: 8 ean: 4048962442380 sr: FISCHER 562210 sr_no_br: 562210 sr_no_br_cl: 562210 sr_cl: FISCHER562210 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 80 mm Drill hole depth - mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) Spanner size 13 mm n: FISCHER 562210 construction plug DuoXpand 10 x 80 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 80 FUS kts: construction plug DuoXpand 10 x 80 FUS hexagonal head kpn: 562210 kpn_dash: kpn_clear: 562210 bkpn: FISCHER 562210 bkpn_clear: FISCHER 562210 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562210 sr_ns: FISCHER562210
r: 02020543 p: 10.15 pid: 17472 b: FISCHER q: 0 st: lt: 8 ean: 4006209976333 sr: FISCHER 97633 sr_no_br: 97633 sr_no_br_cl: 97633 sr_cl: FISCHER97633 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 60 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97633 highbond anchor FHB II-A S M10 x 60/60 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/60 stainless steel A4 kpn: 97633 kpn_dash: kpn_clear: 97633 bkpn: FISCHER 97633 bkpn_clear: FISCHER 97633 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97633 sr_ns: FISCHER97633
r: 02890563 p: 10.01 pid: 176040 b: FISCHER q: 0 st: lt: 8 ean: 4048962153880 sr: FISCHER 518829 sr_no_br: 518829 sr_no_br_cl: 518829 sr_cl: FISCHER518829 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 30 mm Physical state Solid Hazard class GHS05 Corrosive; GHS07 Harmful or irritant; GHS09 Environmental hazard H-statements H315; H317; H318; H335; H411 Conseils de prudence (P) P101; P102; P280; P305 + P351 + P338; P310 EUH-statements EUH208 Principal hazard property GHS05 Corrosive UN number UN3077 ADR class 9 ADR packing group III Flash point 100 °C n: FISCHER 518829 Superbond chemical capsule RSB 30 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The concrete all-rounder with the best performance. The fischer resin capsule RSB contains a hybrid mortar based on styrene-free vinyl ester. The resin capsule is a system component of the fischer Superbond system for fixing in cracked and non-cracked concrete. The components are fixed using the fischer rod anchor RG M made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel, as well as the fischer internal threaded anchor RG MI. The fischer anchor rod is set with the composite anchor setting tool through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. With the fischer Superbond resin capsule objects such as heavy-duty steel constructions, soundproof walls, and high racks can be fixed. Cost-effective processing due to pre-portioning Processing possible up to -30 ° C Ideal for overhead installation Ideal for water-filled drill holes Less cleaning work, glass particles in the capsules rough up the drill hole wall The pre-portioned resin capsule RSB is especially cost-effective for individual applications and overhead installations The ideal solution for difficult conditions and installations with no waiting time due to fast hardening: Approval-compliant processing down to -30°C, also approved for water-filled and diamond-drilled holes as well as for seismic applications in performance category C1 (only in conjunction with RG M) For each diameter, up to three anchorage depths can be realised with the threaded rod RG M through a combination of the resin capsules RSB mini The use of the internal threaded anchor RG M I enables the surface-flush removal of the fixture and the reuse of the fixing point The angular threaded rod RG M can be set for light dynamic loads with the resin capsule system RSB in sizes M12, M16, M20 and M24 in stainless steel R with the fischer filling set Suitable for The 2-component resin capsules RSB and RSB mini contain vinyl ester hybrid mortar with silane technology. They are suitable for pre-positioned installation During setting, the oblique edge of the anchoring element destroys the capsule, and mixes and activates the mortar The glass particles of the capsule body roughen the inside of the drill hole, which reduces the cleaning effort to just four blowing passes The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals the drill hole Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Heavy steel constructions Silo installations Tall shelving Sound barriers Guard rails Staircases ds: dsc: kts: Superbond chemical capsule RSB 30 kpn: 518829 kpn_dash: kpn_clear: 518829 bkpn: FISCHER 518829 bkpn_clear: FISCHER 518829 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 518829 sr_ns: FISCHER518829
r: 08096956 p: 9.97 pid: 176339 b: FISCHER q: 0 st: lt: 8 ean: 4048962462432 sr: FISCHER 564618 sr_no_br: 564618 sr_no_br_cl: 564618 sr_cl: FISCHER564618 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 160 mm Overall length 245 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564618 Piercing anchor FAZ II Plus 10/160 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/160 R stainless steel kpn: 564618 kpn_dash: kpn_clear: 564618 bkpn: FISCHER 564618 bkpn_clear: FISCHER 564618 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564618 sr_ns: FISCHER564618
r: 08096886 p: 9.97 pid: 176247 b: FISCHER q: 0 st: lt: 8 ean: 4048962462258 sr: FISCHER 564600 sr_no_br: 564600 sr_no_br_cl: 564600 sr_cl: FISCHER564600 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 250 mm Overall length 373 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564600 Piercing anchor FAZ II Plus 16/250 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/250 EV electrolytically galvanised steel kpn: 564600 kpn_dash: kpn_clear: 564600 bkpn: FISCHER 564600 bkpn_clear: FISCHER 564600 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564600 sr_ns: FISCHER564600
r: 08134112 p: 9.81 pid: 176368 b: FISCHER q: 0 st: lt: 8 ean: 4048962442342 sr: FISCHER 562206 sr_no_br: 562206 sr_no_br_cl: 562206 sr_cl: FISCHER562206 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 100 mm Drill hole depth - mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) T40 n: FISCHER 562206 construction plug DuoXpand 10 x 100 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 100 T kts: construction plug DuoXpand 10 x 100 T countersunk head kpn: 562206 kpn_dash: kpn_clear: 562206 bkpn: FISCHER 562206 bkpn_clear: FISCHER 562206 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562206 sr_ns: FISCHER562206
r: 02907426 p: 9.72 pid: 176113 b: FISCHER q: 0 st: lt: 8 ean: 4048962265880 sr: FISCHER 538743 sr_no_br: 538743 sr_no_br_cl: 538743 sr_cl: FISCHER538743 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538743 console ALK 37 - 300 cn: MOUNTING RAIL cn2: MOUNTING RAIL cn_clear: MOUNTINGRAIL d: Product description Cantilever arm made from FLS channel profile The fischer cantilever arms ALK enable the cost-effective fixing of single conduits and pipeline routes along walls as second base elements with the mounting channel profile FLS. Thanks to the slots at 90° to each other, the cantilevers can be easily adjusted. The ALK does not need to be cut to size because fischer offers standard lengths from 200 to 600 mm. The galvanised zinc version is suitable for installation in buildings. The fire inspection report as per MLAR / EN1363-1 of the ALK 37 provides added safety. Scaling on both sides along the rail for accurate and correct placement of pipelines Different lengths available for every application Application-specific corrosion protection due to sendzimir galvanisation For use in dry interior areas Fire protection test R120 Sample piping system directive test MLAR R30 The fire inspection report in line with MLAR/EN1363-1 of the ALK 37 guarantees independently tested functional safety The graduated range of lengths allows an ideal adaptation to the application The console's stable base plate offers a secure hold for a load-bearing construction The base plate's long slots, which are at 90° to one another, allow the console to be easily aligned Application Economic installation of single pipes or pipelines along the wall For use in dry interior areas ds: dsc: kts: console ALK 37 - 300 kpn: 538743 kpn_dash: kpn_clear: 538743 bkpn: FISCHER 538743 bkpn_clear: FISCHER 538743 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting rail | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting rail sr_no_br_cl_ns: 538743 sr_ns: FISCHER538743
r: 02907424 p: 9.72 pid: 176052 b: FISCHER q: 0 st: lt: 8 ean: 4048962265873 sr: FISCHER 538742 sr_no_br: 538742 sr_no_br_cl: 538742 sr_cl: FISCHER538742 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538742 console ALK 30 - 450 cn: MOUNTING RAIL cn2: MOUNTING RAIL cn_clear: MOUNTINGRAIL d: Product description Cantilever arm made from FLS channel profile The fischer cantilever arms ALK enable the cost-effective fixing of single conduits and pipeline routes along walls as second base elements with the mounting channel profile FLS. Thanks to the slots at 90° to each other, the cantilevers can be easily adjusted. The ALK does not need to be cut to size because fischer offers standard lengths from 200 to 600 mm. The galvanised zinc version is suitable for installation in buildings. The fire inspection report as per MLAR / EN1363-1 of the ALK 37 provides added safety. Scaling on both sides along the rail for accurate and correct placement of pipelines Different lengths available for every application Application-specific corrosion protection due to sendzimir galvanisation For use in dry interior areas The fire inspection report in line with MLAR/EN1363-1 of the ALK 37 guarantees independently tested functional safety The graduated range of lengths allows an ideal adaptation to the application The console's stable base plate offers a secure hold for a load-bearing construction The base plate's long slots, which are at 90° to one another, allow the console to be easily aligned Application Economic installation of single pipes or pipelines along the wall For use in dry interior areas ds: dsc: kts: console ALK 30 - 450 kpn: 538742 kpn_dash: kpn_clear: 538742 bkpn: FISCHER 538742 bkpn_clear: FISCHER 538742 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting rail | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting rail sr_no_br_cl_ns: 538742 sr_ns: FISCHER538742
r: 08096890 p: 9.72 pid: 176262 b: FISCHER q: 0 st: lt: 8 ean: 4048962463118 sr: FISCHER 564686 sr_no_br: 564686 sr_no_br_cl: 564686 sr_cl: FISCHER564686 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 200 mm Overall length 328 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564686 Piercing anchor FAZ II Plus 16/200 HBS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With a large washer, in line with timber construction standards. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus HBS with washer in line with timber construction standard DIN 1052 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus HBS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The version made of zinc-plated steel is used to fix timber constructions. The steel anchor is, for example, suitable for fixing beams and sills. With washer in line with timber construction standard DIN 1052. This allows for enhanced force transmission when fixing timber constructions Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations Before installation, place the hex nut and washer as per the wood construction standard into the optimum position When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 16/200 HBS EV electrolytically galvanised steel kpn: 564686 kpn_dash: kpn_clear: 564686 bkpn: FISCHER 564686 bkpn_clear: FISCHER 564686 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564686 sr_ns: FISCHER564686
r: 87990762 p: 9.54 pid: 17551 b: FISCHER q: 0 st: lt: 8 ean: 4006209484159 sr: FISCHER 48415 sr_no_br: 48415 sr_no_br_cl: 48415 sr_cl: FISCHER48415 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 15 mm Overall length 50 mm n: FISCHER EA II M12 x 50 impact anchor - 48415 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor made of stainless steel with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II R is an internal threaded anchor made of stainless steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II R is ideal for fixing steel constructions and formwork props in external areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS ETA approval for non-cracked concrete and multiple fixings Made of stainless steel for fixings used outside The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: impact anchor kpn: EA II M12 x 50 kpn_dash: kpn_clear: EAIIM12x50 bkpn: FISCHER EA II M12 x 50 bkpn_clear: FISCHER EAIIM12x50 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48415 sr_ns: FISCHER48415
r: 08096875 p: 9.52 pid: 176225 b: FISCHER q: 0 st: lt: 10 ean: 4048962462289 sr: FISCHER 564603 sr_no_br: 564603 sr_no_br_cl: 564603 sr_cl: FISCHER564603 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 20 mm Effective length 60 mm Overall length 202 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M20 n: FISCHER 564603 Piercing anchor FAZ II Plus 20/60 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 20/60 EV electrolytically galvanised steel kpn: 564603 kpn_dash: kpn_clear: 564603 bkpn: FISCHER 564603 bkpn_clear: FISCHER 564603 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564603 sr_ns: FISCHER564603
r: 02907504 p: 9.45 pid: 176063 b: FISCHER q: 0 st: lt: 15 ean: 4048962265941 sr: FISCHER 538749 sr_no_br: 538749 sr_no_br_cl: 538749 sr_cl: FISCHER538749 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 538749 angle bracket WS 31 - 45° cn: ANGLE BRACKET cn2: ANGLE BRACKET cn_clear: ANGLEBRACKET d: Product description Angle bracket for stable constructions The fischer angle brace WS 31-45° provides supporting structures with really high stability and strength. The dimensions of the angle bracket provide precision that ensures a safe connection with ALK cantilevers and FLS mounting channels. The angle brace dissipates the load either to the wall or to a mounting channel construction. The channel nut FSM Clix P and a screw create the connection to the mounting channel profile. The galvanised zinc version is suitable for installation in buildings. Construction element for use as a support element for bracing rail constructions Corrosion protection suitable for the application due to galvanisation For use in dry interior areas The stable angle brace element WS 31-45° lends the supporting structure a great stability and safety The size of the angle brace element guarantees a secure connection with ALK cantilever arms and FLS channels by it's fitting accuracy The standardised long slots in the angle brace enable an exact connection to ALK cantilever arms or FLS channels by using FSM Clix P and a screw Application Angle brace to construct self- supporting channel constructions with FLS channels or ALK cantilever arms For use in dry interior areas ds: dsc: kts: angle bracket WS 31 - 45° kpn: 538749 kpn_dash: kpn_clear: 538749 bkpn: FISCHER 538749 bkpn_clear: FISCHER 538749 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Angle bracket | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer angle bracket sr_no_br_cl_ns: 538749 sr_ns: FISCHER538749
r: 02020214 p: 9.44 pid: 17057 b: FISCHER q: 0 st: lt: 8 ean: 4006209969441 sr: FISCHER 96944 sr_no_br: 96944 sr_no_br_cl: 96944 sr_cl: FISCHER96944 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 120 mm Anchoring depth 120 mm Width across flats 19 mm Effective length 25 mm Drill hole depth 135 mm Drilling diameter 14 mm n: FISCHER 96944 highbond anchor FHB II-A L M12 x 120/25 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M12 x 120/25 ev kpn: 96944 kpn_dash: kpn_clear: 96944 bkpn: FISCHER 96944 bkpn_clear: FISCHER 96944 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 96944 sr_ns: FISCHER96944
r: 08134116 p: 9.421 pid: 176376 b: FISCHER q: 0 st: lt: 8 ean: 4048962442403 sr: FISCHER 562212 sr_no_br: 562212 sr_no_br_cl: 562212 sr_cl: FISCHER562212 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 120 mm Drill hole depth - mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) Spanner size 13 mm n: FISCHER 562212 construction plug DuoXpand 10 x 120 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 100 FUS kts: construction plug DuoXpand 10 x 120 FUS hexagonal head kpn: 562212 kpn_dash: kpn_clear: 562212 bkpn: FISCHER 562212 bkpn_clear: FISCHER 562212 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562212 sr_ns: FISCHER562212
r: 08096891 p: 9.37 pid: 176253 b: FISCHER q: 0 st: lt: 8 ean: 4048962462876 sr: FISCHER 564662 sr_no_br: 564662 sr_no_br_cl: 564662 sr_cl: FISCHER564662 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 200 mm Overall length 323 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564662 Piercing anchor FAZ II Plus 16/200 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 16/200 GS EV electrolytically galvanised steel kpn: 564662 kpn_dash: kpn_clear: 564662 bkpn: FISCHER 564662 bkpn_clear: FISCHER 564662 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564662 sr_ns: FISCHER564662
r: 03333929 p: 9.29 pid: 176216 b: FISCHER q: 0 st: lt: 15 ean: 4048962521382 sr: FISCHER 572541 sr_no_br: 572541 sr_no_br_cl: 572541 sr_cl: FISCHER572541 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 2 m n: FISCHER 572541 lashing track FLS 30/1.0 - 3m cn: MOUNTING RAIL cn2: MOUNTING RAIL cn_clear: MOUNTINGRAIL d: Product description The flexible channel system for light applications The fischer channel FLS is a base element of the flexible channel system. The C-profile in three heights offers a secure hold for the construction elements of the FLS system with pronounced teeth and corner beading. For horizontal and vertical installations, this enables the fast and efficient fixing of pipelines and supporting structures. Alternating slots for optimum fixing and scaling on the channels to support cutting to size and the positioning of the connectors offer safety and simplify the installation process. The fire inspection report as per MLAR / EN1363-1 of the FLS 37 provides added safety. The fire inspection report in line with MLAR/EN1363-1 of the FLS 37 guarantees independently tested functional safety The channel shape with edge seams gives a perfect fit for the connector elements and leads to a safe and easy installation The serration with stamped teeth in the mounting channel gives the sliding nuts a secure hold to bear high shear loads The scale on the channels simplifies the cutting of the channels and the positioning of the connector elements during installation The alternating long slots in the channel enable the optimised fixing to the substrate with the perfect fixtures Application The U-profile channels enable the creation of secure, horizontal and vertical installations The channel system is suitable for fast and efficient fixings of pipelines and supporting structures For use in dry interior areas ds: dsc: kts: lashing track FLS 30/1.0 - 3m kpn: 572541 kpn_dash: kpn_clear: 572541 bkpn: FISCHER 572541 bkpn_clear: FISCHER 572541 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Mounting rail | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer mounting rail sr_no_br_cl_ns: 572541 sr_ns: FISCHER572541
