r: 02137346 p: 6.02 pid: 22252 b: FISCHER q: 0 st: lt: 5 ean: 4048962087468 sr: FISCHER 507563 sr_no_br: 507563 sr_no_br_cl: 507563 sr_cl: FISCHER507563 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10/25 mm Overall length 106 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 507563 rapid-action anchor FBN II 12/10 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage Stainless steel: permanent safety in outdoor use The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/10 stainless steel R kpn: 507563 kpn_dash: kpn_clear: 507563 bkpn: FISCHER 507563 bkpn_clear: FISCHER 507563 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507563 sr_ns: FISCHER507563
r: 08096910 p: 6.01 pid: 176301 b: FISCHER q: 0 st: lt: 8 ean: 4048962462852 sr: FISCHER 564660 sr_no_br: 564660 sr_no_br_cl: 564660 sr_cl: FISCHER564660 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 200 mm Overall length 300 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564660 Piercing anchor FAZ II Plus 12/200 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/200 GS EV electrolytically galvanised steel kpn: 564660 kpn_dash: kpn_clear: 564660 bkpn: FISCHER 564660 bkpn_clear: FISCHER 564660 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564660 sr_ns: FISCHER564660
r: 02137064 p: 5.99 pid: 21102 b: FISCHER q: 0 st: lt: 8 ean: 4006209502976 sr: FISCHER 50297 sr_no_br: 50297 sr_no_br_cl: 50297 sr_cl: FISCHER50297 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 220 mm Material Stainless steel 316 Drilling diameter 14 mm n: FISCHER 50297 anchor rod RG M12 x 220 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M12 x 220 R stainless steel kpn: 50297 kpn_dash: kpn_clear: 50297 bkpn: FISCHER 50297 bkpn_clear: FISCHER 50297 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50297 sr_ns: FISCHER50297
r: 03414400 p: 5.89 pid: 181410 b: FISCHER q: 0 st: lt: 8 ean: 4048962115260 sr: FISCHER 512249 sr_no_br: 512249 sr_no_br_cl: 512249 sr_cl: FISCHER512249 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 14 mm Length 180 mm Material Stainless steel Anchoring depth 110 mm Width across flats 19 mm Effective length 70 mm n: FISCHER 512249 anchor rod RG M12 x 180 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete. Threaded rods with chamfered edge and 6-sided for easy mounting with pre-portioned glass capsule. Stainless steel for outdoor use. The wide range of RG M from M8 to M30 allows a wide application spectrum and thus offers great flexibility. The many types of approved steel for RG M allows the use all corrosion resistance classes and offers the greatest possible safety in applications. Please note the approvals of the respective glass capsules or mortar. The fischer threaded rod RG M is a system component for use in combination with the fischer chemical anchor capsules RSB and RM II and the fischer injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus. Based on the roof point, the threaded rod is ideally suited for use in combination with the glass capsules RSB and RM II. The extensive range in diameters M 8 - M 30 and in different steel grades make a huge variety of applications possible. The system is particularly suitable for efficient fixing of railings, steel structures and advertising signs, for both indoors and outdoors. The RG M with the mounting attachment for chemical anchors with a rotary-tapping hammer applied. During application glass capsules are broken by the roof tip, mixed together and the mortar mass is activated. The approvals of the respective glass capsules and injection mortars must be taken into account. Applications Anchors with Chemical Capsule RSB and RSB mini Anchors with chemical capsule RM II Anchors with injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus Building materials In connection with fischer glass capsules approved or suitable for cracked and uncracked concrete. In connection with various fischer injection mortars approved or suitable for different building materials. Details (building materials, loads, etc.) of the available approval apply. Certification ETA-02/0024 ETA-19/0501 ETA-20/0603 Function Due to the bevelled jug, the threaded rod RG M is particularly suitable for use in combination with the glass capsules. The threaded rod RG M is inserted using a rotary-tapping hammer and the corresponding mounting aid. During application, the capsule is broken by the RG M's beveled edge, mixed and the mortar activated. The use of injection mortar is also possible. In this case, the threaded rod is pushed to the bottom of the drilled hole by hand, turning slightly. ds: dsc: kts: anchor rod RG M12 x 180 R stainless steel kpn: 512249 kpn_dash: kpn_clear: 512249 bkpn: FISCHER 512249 bkpn_clear: FISCHER 512249 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 512249 sr_ns: FISCHER512249
r: 02137343 p: 5.85 pid: 21051 b: FISCHER q: 0 st: lt: 8 ean: 4048962091120 sr: FISCHER 508011 sr_no_br: 508011 sr_no_br_cl: 508011 sr_cl: FISCHER508011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length -/5 mm Overall length 86 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 508011 rapid-action anchor FBN II 12/5 K stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/5 K stainless steel R kpn: 508011 kpn_dash: kpn_clear: 508011 bkpn: FISCHER 508011 bkpn_clear: FISCHER 508011 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 508011 sr_ns: FISCHER508011
r: 87051168 p: 5.73 pid: 76272 b: FISCHER q: 0 st: lt: 1 ean: 4048962087475 sr: FISCHER 507564 sr_no_br: 507564 sr_no_br_cl: 507564 sr_cl: FISCHER507564 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 20/35 mm Overall length 116 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 507564 rapid-action anchor FBN II 12/20 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing made of stainless steel for use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage Stainless steel: permanent safety in outdoor use The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/20 stainless steel R kpn: 507564 kpn_dash: kpn_clear: 507564 bkpn: FISCHER 507564 bkpn_clear: FISCHER 507564 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507564 sr_ns: FISCHER507564
r: 87051292 p: 5.71 pid: 74557 b: FISCHER q: 0 st: lt: 10 ean: 4006209606544 sr: FISCHER 60654 sr_no_br: 60654 sr_no_br_cl: 60654 sr_cl: FISCHER60654 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 30 mm Overall length 99 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 60654 zykon piercing anchor FZA 12 x 80 M8/30 ev cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The undercut anchor for through-type installations in cracked concrete. The fischer ZYKON push-through anchor FZA-D is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the through-type installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON push-through anchor FZA-D is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs For time-saving push-through installation ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation The ideal interaction of threaded bolts and sleeve with FZA-D allows for a high shear load and therefore fewer fixing points Suitable for The FZA-D is suitable for push-through installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon piercing anchor FZA 12 x 80 M8/30 ev kpn: 60654 kpn_dash: kpn_clear: 60654 bkpn: FISCHER 60654 bkpn_clear: FISCHER 60654 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60654 sr_ns: FISCHER60654
r: 02890437 p: 5.7 pid: 176023 b: FISCHER q: 0 st: lt: 8 ean: 4048962180831 sr: FISCHER 522708 sr_no_br: 522708 sr_no_br_cl: 522708 sr_cl: FISCHER522708 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 290 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522708 construction plug SXRL 10 x 290 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 290 T countersunk head kpn: 522708 kpn_dash: kpn_clear: 522708 bkpn: FISCHER 522708 bkpn_clear: FISCHER 522708 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522708 sr_ns: FISCHER522708
r: 08096911 p: 5.67 pid: 176307 b: FISCHER q: 0 st: lt: 8 ean: 4048962462180 sr: FISCHER 564593 sr_no_br: 564593 sr_no_br_cl: 564593 sr_cl: FISCHER564593 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 200 mm Overall length 300 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M12 n: FISCHER 564593 Piercing anchor FAZ II Plus 12/200 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 12/200 EV electrolytically galvanised steel kpn: 564593 kpn_dash: kpn_clear: 564593 bkpn: FISCHER 564593 bkpn_clear: FISCHER 564593 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564593 sr_ns: FISCHER564593
r: 08134122 p: 5.65 pid: 176382 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 545686 sr_no_br: 545686 sr_no_br_cl: 545686 sr_cl: FISCHER545686 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545686 Drywall plug DuoBlade RH with round hook (6 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Drywall plug DuoBlade RH with round hook (6 pcs) kpn: 545686 kpn_dash: kpn_clear: 545686 bkpn: FISCHER 545686 bkpn_clear: FISCHER 545686 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 545686 sr_ns: FISCHER545686
r: 08134121 p: 5.65 pid: 176322 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 545685 sr_no_br: 545685 sr_no_br_cl: 545685 sr_cl: FISCHER545685 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545685 Drywall plug DuoBlade WH with shop hook (6 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Drywall plug DuoBlade WH with shop hook (6 pcs) kpn: 545685 kpn_dash: kpn_clear: 545685 bkpn: FISCHER 545685 bkpn_clear: FISCHER 545685 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 545685 sr_ns: FISCHER545685
r: 87050192 p: 5.58 pid: 176372 b: FISCHER q: 0 st: lt: 8 ean: 4006209502600 sr: FISCHER 50260 sr_no_br: 50260 sr_no_br_cl: 50260 sr_cl: FISCHER50260 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 20 mm Length 260 mm n: FISCHER 50260 anchor rod RG M20 x 260 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M20 x 260 electrolytically zinc-plated 5.8 kpn: 50260 kpn_dash: kpn_clear: 50260 bkpn: FISCHER 50260 bkpn_clear: FISCHER 50260 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50260 sr_ns: FISCHER50260
r: 02019993 p: 5.54 pid: 16134 b: FISCHER q: 0 st: lt: 8 ean: 4006209505847 sr: FISCHER 50584 sr_no_br: 50584 sr_no_br_cl: 50584 sr_cl: FISCHER50584 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 24 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M10 n: FISCHER 50584 wall bolt MR 10 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The fixing with simple Hammerset installation in non-cracked concrete. The fischer wall screw MR is an anchor sleeve with a zinc-plated internal expansion pin. The MR is set in the pre-positioned and push-through installation. In this case the anchor sleeve without expansion pin is driven into the drill hole with a hammer. Afterwards, the expansion pin is driven in with a hammer. This expands the wall screw against the drill hole wall. Simple installation with few hammer blows. This saves time Power-saving installation due to the special geometry of the expansion pin Simple visual control saves time The special construction of the anchor sleeve enables it to be set into the drill hole with a low number of hammer blows. This enables easy installation The flush-sunk expansion pin signifies the complete expansion of the anchor, and thereby ensures minimum movement when under load The special geometry of the expansion pin reduces the setting energy, thereby enabling a fast and energy-saving installation Suitable for The MR is suitable for pre-positioned and push-through installation The anchor sleeve is driven into the drill hole with a hammer, without the need for an expansion pin Then the expansion pin is driven in with a hammer, and the wall screw expands against the drill hole wall Building materials Suitable for: Concrete C12/15 to C50/60, non-cracked Natural stone with dense structure Application Non-approval-relevant fixings only Handrails Gratings Garden gates ds: dsc: kts: wall bolt MR 10 electrolytically galvanised steel kpn: 50584 kpn_dash: kpn_clear: 50584 bkpn: FISCHER 50584 bkpn_clear: FISCHER 50584 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 50584 sr_ns: FISCHER50584
r: 02020203 p: 5.53 pid: 17050 b: FISCHER q: 0 st: lt: 8 ean: 4006209970348 sr: FISCHER 97034 sr_no_br: 97034 sr_no_br_cl: 97034 sr_cl: FISCHER97034 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 60 mm Anchoring depth 60 mm Width across flats 13 mm Effective length 50 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97034 highbond anchor FHB II-A L M8 x 60/50 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M8 x 60/50 ev kpn: 97034 kpn_dash: kpn_clear: 97034 bkpn: FISCHER 97034 bkpn_clear: FISCHER 97034 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97034 sr_ns: FISCHER97034
r: 08096898 p: 5.44 pid: 176283 b: FISCHER q: 0 st: lt: 4 ean: 4048962462227 sr: FISCHER 564597 sr_no_br: 564597 sr_no_br_cl: 564597 sr_cl: FISCHER564597 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 100 mm Overall length 223 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M16 n: FISCHER 564597 Piercing anchor FAZ II Plus 16/100 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/100 EV electrolytically galvanised steel kpn: 564597 kpn_dash: kpn_clear: 564597 bkpn: FISCHER 564597 bkpn_clear: FISCHER 564597 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564597 sr_ns: FISCHER564597
r: 08096940 p: 5.43 pid: 176316 b: FISCHER q: 0 st: lt: 8 ean: 4048962462920 sr: FISCHER 564667 sr_no_br: 564667 sr_no_br_cl: 564667 sr_cl: FISCHER564667 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 10 mm Overall length 110 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M12 n: FISCHER 564667 Piercing anchor FAZ II Plus 12/10 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/10 GS R stainless steel kpn: 564667 kpn_dash: kpn_clear: 564667 bkpn: FISCHER 564667 bkpn_clear: FISCHER 564667 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564667 sr_ns: FISCHER564667
r: 02020186 p: 5.4 pid: 17044 b: FISCHER q: 0 st: lt: 8 ean: 4006209972687 sr: FISCHER 97268 sr_no_br: 97268 sr_no_br_cl: 97268 sr_cl: FISCHER97268 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 75 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 25 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97268 highbond anchor FHB II-A S M12 x 75/25 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/25 ev kpn: 97268 kpn_dash: kpn_clear: 97268 bkpn: FISCHER 97268 bkpn_clear: FISCHER 97268 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97268 sr_ns: FISCHER97268
r: 08134119 p: 5.32 pid: 176367 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 545683 sr_no_br: 545683 sr_no_br_cl: 545683 sr_cl: FISCHER545683 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw No With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545683 Plasterboard plug DuoBlade (10 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Plasterboard plug DuoBlade (10 pcs) kpn: 545683 kpn_dash: kpn_clear: 545683 bkpn: FISCHER 545683 bkpn_clear: FISCHER 545683 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 545683 sr_ns: FISCHER545683
r: 08134123 p: 5.32 pid: 176352 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 546756 sr_no_br: 546756 sr_no_br_cl: 546756 sr_cl: FISCHER546756 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 546756 Plasterboard plug DuoBlade S PH with round head screw (6 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Plasterboard plug DuoBlade S PH with round head screw (6 pcs) kpn: 546756 kpn_dash: kpn_clear: 546756 bkpn: FISCHER 546756 bkpn_clear: FISCHER 546756 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 546756 sr_ns: FISCHER546756
r: 08134120 p: 5.32 pid: 176389 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 545684 sr_no_br: 545684 sr_no_br_cl: 545684 sr_cl: FISCHER545684 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter - mm Length (Wall plug) 44 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Plasterboard plug With screw Yes With collar Yes Application Construction board type (screw head) PZ2 n: FISCHER 545684 Plasterboard plug DuoBlade S with screw (6 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The self-drilling drywall plug for quick and easy installation Centre point for precise positioning of the plug Anti-rotation toothing prevents the plug from rotating in the drilled hole PZ2 bit - the same bit for both plug and screw With matching screw. An innovative product for easy and quick installation in plasterboard. Suitable for mounting in both single and double plasterboard, as well as plasterboard with insulation on the back. In one operation both drilling the hole and inserting the plug, only a PZ2 bit is required for installation. Optimal feelgood factor - high torque when the plug is properly mounted. The black metal drill tip guarantees easy and safe installation. The fischer DuoBlade is part of the innovative DuoLine. It consists of several components, which together enable the best possible performance in plasterboard. The self-drilling tip ensures easy and quick installation. The plug is screwed into the plasterboard using a (cordless) screwdriver where the plug is mounted flush against the surface of the plasterboard. The fischer DuoBlade is suitable for chipboard screws of 4 to 5 mm thickness and for various hook and eye screws. This makes it universally suitable for the secure and quick fixing of, for example, smoke detectors, curtain rods and shutters. Applications Smoke detectors Mirrors Curtain rails Blinds Lighting Paintings Building materials Suitable for: Plasterboard, single and double sheets Gypsum fibreboard Cement fibreboard ds: dsc: kts: Plasterboard plug DuoBlade S with screw (6 pcs) kpn: 545684 kpn_dash: kpn_clear: 545684 bkpn: FISCHER 545684 bkpn_clear: FISCHER 545684 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 545684 sr_ns: FISCHER545684
