r: 02137045 p: 3.98 pid: 22440 b: FISCHER q: 0 st: lt: 3 ean: 4006209502945 sr: FISCHER 50294 sr_no_br: 50294 sr_no_br_cl: 50294 sr_cl: FISCHER50294 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Length 165 mm Material Stainless steel A4 Drilling diameter 12 mm n: FISCHER 50294 anchor rod RG M10 x 165 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for external use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Stainless steel for outdoor use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M10 x 165 R stainless steel kpn: 50294 kpn_dash: kpn_clear: 50294 bkpn: FISCHER 50294 bkpn_clear: FISCHER 50294 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50294 sr_ns: FISCHER50294
r: 87051274 p: 3.96 pid: 74361 b: FISCHER q: 0 st: lt: 8 ean: 4006209607183 sr: FISCHER 60718 sr_no_br: 60718 sr_no_br_cl: 60718 sr_cl: FISCHER60718 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 14 mm Effective length 25 mm Overall length 79 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread dimension M10 n: FISCHER 60718 zykon anchor FZA 14 x 40 M10/25 electrolytically galvanised cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The fixing system with the highest safety in cracked concrete. The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete. Maximum safety due to a positive fit connection Low axial and edge distances due to expansion pressure-free installation Fast installation, no exchanging tools. This saves time and costs Power-saving installation with low setting energy ETA approval for cracked concrete and fire resistance class R 120 The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use The FZUB special drill allows for a fast installation by creating the undercut without having to change tools The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation Suitable for The FZA is suitable for pre-positioned installation The undercut drill hole is created using the special FZUB drill Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: zykon anchor FZA 14 x 40 M10/25 electrolytically galvanised kpn: 60718 kpn_dash: kpn_clear: 60718 bkpn: FISCHER 60718 bkpn_clear: FISCHER 60718 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60718 sr_ns: FISCHER60718
r: 08134134 p: 3.96 pid: 176371 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 542802 sr_no_br: 542802 sr_no_br_cl: 542802 sr_cl: FISCHER542802 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542802 Hollow wall plug DuoTec 12 S PH with metric round head screw (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 S PH with metric round head screw (2 pcs) kpn: 542802 kpn_dash: kpn_clear: 542802 bkpn: FISCHER 542802 bkpn_clear: FISCHER 542802 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542802 sr_ns: FISCHER542802
r: 08096924 p: 3.95 pid: 176325 b: FISCHER q: 0 st: lt: 8 ean: 4048962462821 sr: FISCHER 564657 sr_no_br: 564657 sr_no_br_cl: 564657 sr_cl: FISCHER564657 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 140 mm Overall length 240 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564657 Piercing anchor FAZ II Plus 12/140 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/140 GS EV electrolytically galvanised steel kpn: 564657 kpn_dash: kpn_clear: 564657 bkpn: FISCHER 564657 bkpn_clear: FISCHER 564657 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564657 sr_ns: FISCHER564657
r: 08134138 p: 3.95 pid: 176359 b: FISCHER q: 0 st: lt: 8 ean: 4048962396119 sr: FISCHER 554925 sr_no_br: 554925 sr_no_br_cl: 554925 sr_cl: FISCHER554925 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 15 mm Overall length 86,4 mm Material Steel Surface treatment Zinc plated n: FISCHER 554925 shear anchor FH II 15/80 EN SCD cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The moment-controlled shear anchor for maximum safety. Perfect form closure of the anchor in ribbed or hollow-core slab floors With extra-large washer for almost all shoring feet Visual check after assembly by green signal element Can be installed with an impact spanner and does not need to be checked with a torque wrench The torque-controlled washer guarantees correct installation torque for easy and safe assembly The mechanical and visual check of the FH II NL SCD allows installation without a torque spanner. The use of an impact spanner allows quick and user-friendly mounting. Both assembly and disassembly of the FH II NL SCD can be carried out with one cap size. The fischer cantilever anchor FH II NL SCD has been specially developed for fixing braces on hollow-core slabs and ribbed floors. Bracing on concrete walls requires secure anchoring. When mounted, the cone is pulled into the spreader sleeve, which then clamps against the borehole wall. The black crumple zone prevents the Bracing Anchor from rotating along and absorbs the tightening slip. The black plastic ring prevents the anchor from being tightened beyond the maximum torque. The green signal element becomes visible as soon as the correct torque is achieved. This visual check therefore indicates that the anchor has been correctly assembled and provides security and safety on the construction site. After dismantling, no protruding parts remain in the borehole, reducing the risk of accidents. Applications Braces Building materials Suitable for: Ductile slabs C40/50 Ribbed concrete slabs C40/50 Solid concrete >= C20/25 ds: dsc: kts: shear anchor FH II 15/80 EN SCD kpn: 554925 kpn_dash: kpn_clear: 554925 bkpn: FISCHER 554925 bkpn_clear: FISCHER 554925 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 554925 sr_ns: FISCHER554925
r: 08096927 p: 3.95 pid: 176309 b: FISCHER q: 0 st: lt: 8 ean: 4048962462807 sr: FISCHER 564655 sr_no_br: 564655 sr_no_br_cl: 564655 sr_cl: FISCHER564655 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 120 mm Overall length 220 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564655 Piercing anchor FAZ II Plus 12/120 GS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/120 GS EV electrolytically galvanised steel kpn: 564655 kpn_dash: kpn_clear: 564655 bkpn: FISCHER 564655 bkpn_clear: FISCHER 564655 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564655 sr_ns: FISCHER564655
r: 02827245 p: 3.9 pid: 175982 b: FISCHER q: 0 st: lt: 8 ean: 4048962271829 sr: FISCHER 539803 sr_no_br: 539803 sr_no_br_cl: 539803 sr_cl: FISCHER539803 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 24 mm Physical state Solid Hazard class GHS09 Environmental hazard H-statements H411 Conseils de prudence (P) P280 EUH-statements EUH208 Principal hazard property GHS09 Environmental hazard UN number ADR class ADR packing group Flash point > 100 °C n: FISCHER 539803 chemical anchor capsule RM II 24 cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 24 kpn: 539803 kpn_dash: kpn_clear: 539803 bkpn: FISCHER 539803 bkpn_clear: FISCHER 539803 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539803 sr_ns: FISCHER539803
r: 02020679 p: 3.85 pid: 17118 b: FISCHER q: 0 st: lt: 10 ean: 4048962001020 sr: FISCHER 500549 sr_no_br: 500549 sr_no_br_cl: 500549 sr_cl: FISCHER500549 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 16 mm Conseils de prudence (P) P280 ADR packing group Length 95 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point > 100 °C Drill hole depth 110 mm Drilling diameter 16 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500549 chemical capsule FHB II-PF 16 x 95 fast-curing cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 16 x 95 fast-curing kpn: 500549 kpn_dash: kpn_clear: 500549 bkpn: FISCHER 500549 bkpn_clear: FISCHER 500549 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500549 sr_ns: FISCHER500549
r: 02776800 p: 3.82 pid: 20712 b: FISCHER q: 0 st: lt: 8 ean: 4048962251616 sr: FISCHER 536878 sr_no_br: 536878 sr_no_br_cl: 536878 sr_cl: FISCHER536878 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 14 mm Length 150 mm Max. useful length 85 mm n: FISCHER 536878 concrete screw FBS II 14x150 85/65/35 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x150 85/65/35 hexagon head kpn: 536878 kpn_dash: kpn_clear: 536878 bkpn: FISCHER 536878 bkpn_clear: FISCHER 536878 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536878 sr_ns: FISCHER536878
r: 08096949 p: 3.82 pid: 176321 b: FISCHER q: 0 st: lt: 8 ean: 4048962462913 sr: FISCHER 564666 sr_no_br: 564666 sr_no_br_cl: 564666 sr_cl: FISCHER564666 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 30 mm Overall length 115 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread dimension M10 n: FISCHER 564666 Piercing anchor FAZ II Plus 10/30 GS R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With large washer. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus GS stainless steel with a large washer is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the stainless steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus GS stainless steel can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. For example, the steel anchor with large washer is ideal for fixing steel components or façade substructures with slots. Pre-assembled washer for components with slots. This simplifies alignment and saves time during installation Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus GS are suitable for fixing steel fixtures with long holes thanks to the special washer, and help to reduce installation effort The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 10/30 GS R stainless steel kpn: 564666 kpn_dash: kpn_clear: 564666 bkpn: FISCHER 564666 bkpn_clear: FISCHER 564666 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564666 sr_ns: FISCHER564666
r: 02020686 p: 3.81 pid: 17204 b: FISCHER q: 0 st: lt: 8 ean: 4048962000979 sr: FISCHER 500544 sr_no_br: 500544 sr_no_br_cl: 500544 sr_cl: FISCHER500544 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 12 mm Conseils de prudence (P) P280 ADR packing group Length 120 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point > 100 °C Drill hole depth 135 mm Drilling diameter 14 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500544 chemical capsule FHB II-PF 12 x 120 rapid hardening cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 12 x 120 rapid hardening kpn: 500544 kpn_dash: kpn_clear: 500544 bkpn: FISCHER 500544 bkpn_clear: FISCHER 500544 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500544 sr_ns: FISCHER500544
r: 87051125 p: 3.77 pid: 74448 b: FISCHER q: 0 st: lt: 1 ean: 4006209455654 sr: FISCHER 45565 sr_no_br: 45565 sr_no_br_cl: 45565 sr_cl: FISCHER45565 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50/65 mm Overall length 170 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread dimension M16 n: FISCHER 45565 rapid-action anchor FBN II 16/50 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete. The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas. The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility Simple assembly due to few taps and minimal slippage The drive-in pin protects the thread from damage. This saves time during installation and removal The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 16/50 electrolytically galvanised steel kpn: 45565 kpn_dash: kpn_clear: 45565 bkpn: FISCHER 45565 bkpn_clear: FISCHER 45565 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 45565 sr_ns: FISCHER45565
r: 08096882 p: 3.77 pid: 176268 b: FISCHER q: 0 st: lt: 8 ean: 4048962462210 sr: FISCHER 564596 sr_no_br: 564596 sr_no_br_cl: 564596 sr_cl: FISCHER564596 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50 mm Overall length 173 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M16 n: FISCHER 564596 Piercing anchor FAZ II Plus 16/50 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs New ETA confirms the use of FAZ II Plus for the dynamic load of components for diameters M16-M24 under direct load Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 16/50 EV electrolytically galvanised steel kpn: 564596 kpn_dash: kpn_clear: 564596 bkpn: FISCHER 564596 bkpn_clear: FISCHER 564596 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564596 sr_ns: FISCHER564596
r: 02019805 p: 3.74 pid: 17434 b: FISCHER q: 0 st: lt: 8 ean: 4006209441237 sr: FISCHER 44123 sr_no_br: 44123 sr_no_br_cl: 44123 sr_cl: FISCHER44123 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Material Stainless steel A4 Length 65 mm Effective length 30 mm Head diameter 13 mm Drilling diameter 6 mm n: FISCHER 44123 nail anchor FNA II 6x30/30 with nail head stainless steel A4 cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description The installation-friendly Hammerset anchor made of stainless steel for multiple fixings. The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing mounting rails and timber or sub-constructions in external areas. Hammerset installation saves time No reinforcement hits due to low anchorage depth This saves time and costs during series installation Expansion clip provides a firm hold ETA approval for multiple fixings Made of stainless steel for fixings used outside The special active principle allows for a simple hammerset installation and, therefore, a short processing time The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use Suitable for The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and Hare suitable for pre-positioned installation The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails Building materials Approved for: Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications Also suitable for: Solid sand-lime brick Natural stone with dense structure Prestressed hollow-core concrete slabs Application Fire protection plates Fire protection boards Ventilation systems Wire and nonious hangers Mounting rails Metal clamps Substructures made of wood and metal ds: dsc: kts: nail anchor FNA II 6x30/30 with nail head stainless steel A4 kpn: 44123 kpn_dash: kpn_clear: 44123 bkpn: FISCHER 44123 bkpn_clear: FISCHER 44123 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 44123 sr_ns: FISCHER44123
r: 02137335 p: 3.72 pid: 22250 b: FISCHER q: 0 st: lt: 1 ean: 4048962087406 sr: FISCHER 507557 sr_no_br: 507557 sr_no_br_cl: 507557 sr_cl: FISCHER507557 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 50/60 mm Overall length 111 mm Material (bolt) Stainless steel A4 Thread dimension M8 n: FISCHER 507557 rapid-action anchor FBN II 8/50 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/50 stainless steel R kpn: 507557 kpn_dash: kpn_clear: 507557 bkpn: FISCHER 507557 bkpn_clear: FISCHER 507557 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507557 sr_ns: FISCHER507557
r: 08096925 p: 3.69 pid: 176319 b: FISCHER q: 0 st: lt: 8 ean: 4048962463095 sr: FISCHER 564684 sr_no_br: 564684 sr_no_br_cl: 564684 sr_cl: FISCHER564684 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 120 mm Overall length 225 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread dimension M12 n: FISCHER 564684 Piercing anchor FAZ II Plus 12/120 HBS EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With a large washer, in line with timber construction standards. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus HBS with washer in line with timber construction standard DIN 1052 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the zinc-plated steel anchor. Due to the variable anchorage depths and simple mounting, the FAZ II Plus HBS can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The version made of zinc-plated steel is used to fix timber constructions. The steel anchor is, for example, suitable for fixing beams and sills. With washer in line with timber construction standard DIN 1052. This allows for enhanced force transmission when fixing timber constructions Quick and easy assembly without the need for drill hole cleaning (M8-M24) Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The FAZ II Plus HBS with extra large washer as per the wood construction standard DIN 1052 included in the delivery ensures even better force transfer for the fixation of sills and beams, for example The significantly larger outer diameter of the washers for FAZ II Plus 16 GS ensures a larger supporting surface, and as such allows for use in wood construction Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus HBS is suitable for pre-positioned and push-through installation and is also ideal for stand-off installations Before installation, place the hex nut and washer as per the wood construction standard into the optimum position When the torque is applied, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: Piercing anchor FAZ II Plus 12/120 HBS EV electrolytically galvanised steel kpn: 564684 kpn_dash: kpn_clear: 564684 bkpn: FISCHER 564684 bkpn_clear: FISCHER 564684 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564684 sr_ns: FISCHER564684
r: 02890458 p: 3.68 pid: 176042 b: FISCHER q: 0 st: lt: 8 ean: 4048962181029 sr: FISCHER 522727 sr_no_br: 522727 sr_no_br_cl: 522727 sr_cl: FISCHER522727 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 230 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522727 construction plug SXRL 10 x 230 FUS hexagon head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 230 FUS hexagon head kpn: 522727 kpn_dash: kpn_clear: 522727 bkpn: FISCHER 522727 bkpn_clear: FISCHER 522727 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522727 sr_ns: FISCHER522727
r: 08096947 p: 3.6 pid: 176340 b: FISCHER q: 0 st: lt: 13 ean: 4048962462395 sr: FISCHER 564614 sr_no_br: 564614 sr_no_br_cl: 564614 sr_cl: FISCHER564614 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 30 mm Overall length 115 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread dimension M10 n: FISCHER 564614 Piercing anchor FAZ II Plus 10/30 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/30 R stainless steel kpn: 564614 kpn_dash: kpn_clear: 564614 bkpn: FISCHER 564614 bkpn_clear: FISCHER 564614 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564614 sr_ns: FISCHER564614
r: 08134133 p: 3.55 pid: 176394 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 542801 sr_no_br: 542801 sr_no_br_cl: 542801 sr_cl: FISCHER542801 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542801 Hollow wall plug DuoTec 12 (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 (2 pcs) kpn: 542801 kpn_dash: kpn_clear: 542801 bkpn: FISCHER 542801 bkpn_clear: FISCHER 542801 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542801 sr_ns: FISCHER542801
r: 02827240 p: 3.54 pid: 175993 b: FISCHER q: 0 st: lt: 8 ean: 4048962271805 sr: FISCHER 539801 sr_no_br: 539801 sr_no_br_cl: 539801 sr_cl: FISCHER539801 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 16 mm Physical state Solid Hazard class GHS09 Environmental hazard H-statements H411 Conseils de prudence (P) P280 EUH-statements EUH208 Principal hazard property GHS09 Environmental hazard UN number ADR class ADR packing group Flash point > 100 °C n: FISCHER 539801 chemical anchor capsule RM II 16 E cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description The bonded anchor for cracked concrete without drill hole cleaning The fischer resin capsule RM II together with the threaded rod RG M is the first capsule with European Technical Assessment Option 1 for cracked concrete, which does not require hole cleaning. Steel constructions, machines or staircases outside and indoors can be fixed with the resin anchor. The resin capsule can be used with the fischer threaded rod RG M and the fischer internal threaded anchor RG MI. Hole cleaning is not necessary with the resin capsule RM II, however comparatively high loads can be supported. This allows for a fast work progress. Resin capsule for fixings in cracked concrete Fast processing without drill hole cleaning Secure anchorage of high loads Ideal for single point fixings and overhead installations Numerous threaded rods available as accessories RM II is the first bonded anchor with threaded rod RG M or internal-threaded anchor RG M I that does not need drill hole cleaning. This allows fast progress and efficient installation In addition, the construction site is less affected by drill dust. This increases safety for the user The pre-portioned resin capsule is easy to use and particularly suitable for individual applications and overhead installations Use of the internal threaded anchor RG MI allows the surface-flush removal and reuse of the fixing point, and therefore offers the best possible flexibility Suitable for The resin capsule RM II in conjunction with the threaded rod RG M or internal-threaded anchor RG MI is suitable for pre-positioned installation The 2-component resin capsule RM II contains styrene-free vinylester resin and hardener The fixing element is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the fixing element destroys the capsule, and mixes and activates the mortar The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Natural stone with dense structure Application Suitable for: Steel constructions Guard rails Staircases Column bases Machines Masts Removable fixings Temporary fixings, e. g. for machines Scaffold anchoring Approved for: Overhead installations Water-filled drill holes ds: dsc: kts: chemical anchor capsule RM II 16 E kpn: 539801 kpn_dash: kpn_clear: 539801 bkpn: FISCHER 539801 bkpn_clear: FISCHER 539801 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 539801 sr_ns: FISCHER539801
