r: 87030028 p: 0.038 pid: 76211 b: FISCHER q: 0 st: lt: 8 ean: 4006209700082 sr: FISCHER 70008 sr_no_br: 70008 sr_no_br_cl: 70008 sr_cl: FISCHER70008 sr_dash: sold: 1124.8 p_range: none act: 1 avo: av: Diameter (wall plug) - mm Length (Wall plug) 40 mm Drill hole depth 50 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar Yes Application General type (screw head) Drilling diameter 8 mm n: FISCHER 70008 plug SX 8 x 40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description: The powerful nylon fixing with four-way expansion, with rim for optimum hold. Due to four-way expansion, the fischer expansion plug SX optimally transfers forces into the building material. The high-quality nylon used in production and typical expansion guarantee a secure, permanent connection. The edge on the head of the fixing prevents the fixing from slipping into the drill hole. Top Features Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials. Simple to assemble: The edge of the plug prevents it from falling deeper into the drill hole. No expansion pressure on the plug neck. This means that tiles or plaster are not damaged. Advantages The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials. The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. The greater anchorage depth of the SX 6x50, 8x65 and 10x80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster. Applications Lighting Wardrobes Motion detectors Skirting Light shelves Mirror cabinets Letter boxes TV consoles Trellis Folding shutters Bath and toilet installations Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Functioning The SX is suitable for pre-positioned and push-through installation. When turning in the screw, the SX expands in four directions, thus providing a secure anchoring in the building material. The required screw length is given by: Plug length + fixture thickness + 1 x screw diameter. Suitable for wood, chipboard and spacing screws (fischer ASL, see page ). ds: dsc: kts: plug SX 8 x 40 kpn: 70008 kpn_dash: kpn_clear: 70008 bkpn: FISCHER 70008 bkpn_clear: FISCHER 70008 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 70008 sr_ns: FISCHER70008
r: 87990105 p: 0.047 pid: 75415 b: FISCHER q: 0 st: lt: 8 ean: 4006209248270 sr: FISCHER 24827 sr_no_br: 24827 sr_no_br_cl: 24827 sr_cl: FISCHER24827 sr_dash: sold: 869.5 p_range: none act: 1 avo: av: Wall plug type Universal plug n: FISCHER 24827 plug SX 6 x 50 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description: The powerful nylon fixing with four-way expansion and larger anchoring depth. The fischer expansion plug SX transfers force optimally in the building material through the 4-way expansion. Apart from the typical expansion, the high-quality nylon used for its production guarantees secure and permanent fixing. The plug is available in sizes from 4 x 20 to 16 x 80 mm and optionally with screws. The fischer expansion plug SX is the first choice when fixing, for example, lighting, lasts, bath and toilet installations and light wall cabinets in concrete and aerated concrete, but also in masonry made from solid or hollow building materials. The variants with preshaped edges prevent the plug from slipping into the drill hole. The variants with larger anchorage depths are Ideal for fixings in hollow building materials, in aerated concrete and for plaster covering. Top Features Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials. No expansion pressure on the plug neck. This means that tiles or plaster are not damaged. Greater anchorage depth: better force transition in hollow building materials and aerated concrete. Advantages The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials. The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. The greater anchorage depth of the SX 6x50, 8x65 and 10x80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster. Applications Lighting Wardrobes Motion detectors Skirting Light shelves Mirror cabinets Letter boxes TV consoles Trellis Folding shutters Bath and toilet installations Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Functioning The SX is suitable for pre-positioned and push-through installation. When turning in the screw, the SX expands in four directions, thus providing a secure anchoring in the building material. The required screw length is given by: Plug length + fixture thickness + 1 x screw diameter. Suitable for wood, chipboard and spacing screws (fischer ASL, see page ). ds: dsc: kts: plug SX 6 x 50 kpn: 24827 kpn_dash: kpn_clear: 24827 bkpn: FISCHER 24827 bkpn_clear: FISCHER 24827 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 24827 sr_ns: FISCHER24827
r: 87990106 p: 0.062 pid: 74516 b: FISCHER q: 0 st: lt: 4 ean: 4006209248287 sr: FISCHER 24828 sr_no_br: 24828 sr_no_br_cl: 24828 sr_cl: FISCHER24828 sr_dash: sold: 558 p_range: none act: 1 avo: av: Diameter (wall plug) - mm Length (Wall plug) 65 mm Drill hole depth 75 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Universal plug With screw No Application General type (screw head) Drilling diameter 8 mm n: FISCHER 24828 plug SX 8 x 65 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The powerful nylon fixing with four-way expansion and larger anchoring depth. The fischer expansion plug SX transfers force optimally in the building material through the 4-way expansion. Apart from the typical expansion, the high-quality nylon used for its production guarantees secure and permanent fixing. This variant, with larger anchorage depths, is Ideal for fixings in hollow building materials, in aerated concrete and for plaster covering. Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials No expansion pressure on the plug neck. This means that tiles or plaster are not damaged Greater anchorage depth: better force transition in hollow building materials and aerated concrete The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation The greater anchorage depth of the SX 6x50, 8x65 and 10x80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The SX is suitable for pre-positioned and push-through installation When turning in the screw, the SX expands in four directions, thus providing a secure anchoring in the building material The required screw length is given by: Plug length + fixture thickness + 1 x screw diameter Suitable for wood, chipboard and spacing screws Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Application Lighting Wardrobes Motion detectors Skirting Light shelves Mirror cabinets Letter boxes TV consoles Trellis Folding shutters Bath and toilet installations ds: dsc: kts: plug SX 8 x 65 kpn: 24828 kpn_dash: kpn_clear: 24828 bkpn: FISCHER 24828 bkpn_clear: FISCHER 24828 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 24828 sr_ns: FISCHER24828
r: 87051188 p: 2.21 pid: 75266 b: FISCHER q: 0 st: lt: 8 ean: 4006209977422 sr: FISCHER 97742 sr_no_br: 97742 sr_no_br_cl: 97742 sr_cl: FISCHER97742 sr_dash: sold: 442 p_range: none act: 1 avo: av: Drilling diameter 12 mm Effective length 5 mm Overall length 76 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread dimension M12 n: FISCHER 97742 express anchor EXA 12/5 (12x80) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 12/5 (12x80) electrolytically galvanised steel kpn: 97742 kpn_dash: kpn_clear: 97742 bkpn: FISCHER 97742 bkpn_clear: FISCHER 97742 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97742 sr_ns: FISCHER97742
r: 87051183 p: 1.57 pid: 76279 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 97738 sr_no_br: 97738 sr_no_br_cl: 97738 sr_cl: FISCHER97738 sr_dash: sold: 314 p_range: none act: 1 avo: av: Drilling diameter 10 mm Thread dimension M10 Effective length 15 mm Overall length 92 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER 97738 express anchor EXA 10/15 (10x92) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 10/15 (10x92) electrolytically galvanised steel kpn: 97738 kpn_dash: kpn_clear: 97738 bkpn: FISCHER 97738 bkpn_clear: FISCHER 97738 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97738 sr_ns: FISCHER97738
r: 02020683 p: 2.31 pid: 17200 b: FISCHER q: 0 st: lt: 8 ean: 4048962000955 sr: FISCHER 500542 sr_no_br: 500542 sr_no_br_cl: 500542 sr_cl: FISCHER500542 sr_dash: sold: 254.1 p_range: none act: 1 avo: av: For diameter 8 mm Conseils de prudence (P) P280 ADR packing group Length 60 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point >100 °C Drill hole depth 75 mm Drilling diameter 10 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500542 chemical capsule FHB II-PF 8 x 60 fast-curing cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 8 x 60 fast-curing kpn: 500542 kpn_dash: kpn_clear: 500542 bkpn: FISCHER 500542 bkpn_clear: FISCHER 500542 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500542 sr_ns: FISCHER500542
r: 02661461 p: 17.9 pid: 4236 b: FISCHER q: 0 st: lt: 5 ean: 4006209605158 sr: FISCHER 60515 sr_no_br: 60515 sr_no_br_cl: 60515 sr_cl: FISCHER60515 sr_dash: sold: 232.7 p_range: none type: standard act: 1 avo: av: n: FISCHER 60515 dowel assortment box S 6, 8 and 10 cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description: The practical fischer box with fischer expansion plugs S 6, S 8, and S 10. Fischer offers plugs, screws and other fixing solutions in boxes, blister packs, plastic bags or round tins at an optimum price/performance ratio. Top Features No searching: most important diameters are pre-sorted. Transparent cover: Overview at a glance. High quality assembly box for refilling. Advantages The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances. The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation. The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety. Applications Lighting Light shelves Mirror cabinets Letter boxes Curtain rails Electrical installations Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Functioning The expansion plug S is suitable for pre-positioned and push-through installation. When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material. The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter. Suitable for wood and chipboard screws. The edge distance must be at least one plug length. For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge. ds: dsc: kts: dowel assortment box S 6, 8 and 10 kpn: 60515 kpn_dash: kpn_clear: 60515 bkpn: FISCHER 60515 bkpn_clear: FISCHER 60515 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug assortment sr_no_br_cl_ns: 60515 sr_ns: FISCHER60515
r: 87051205 p: 11.12 pid: 74324 b: FISCHER q: 0 st: lt: 8 ean: 4006209977576 sr: FISCHER 97757 sr_no_br: 97757 sr_no_br_cl: 97757 sr_cl: FISCHER97757 sr_dash: sold: 222.4 p_range: none act: 1 avo: av: Drilling diameter 20 mm Thread dimension M20 Effective length 25 mm Overall length 172 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER 97757 express anchor EXA 20/25 (20x175) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 20/25 (20x175) electrolytically galvanised steel kpn: 97757 kpn_dash: kpn_clear: 97757 bkpn: FISCHER 97757 bkpn_clear: FISCHER 97757 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97757 sr_ns: FISCHER97757
r: 87051198 p: 4.39 pid: 75281 b: FISCHER q: 0 st: lt: 3 ean: 4006209977521 sr: FISCHER 97752 sr_no_br: 97752 sr_no_br_cl: 97752 sr_cl: FISCHER97752 sr_dash: sold: 175.6 p_range: none act: 1 avo: av: Drilling diameter 16 mm Effective length 30 mm Overall length 153 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread dimension M16 n: FISCHER 97752 express anchor EXA 16/30 (16x153) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 16/30 (16x153) electrolytically galvanised steel kpn: 97752 kpn_dash: kpn_clear: 97752 bkpn: FISCHER 97752 bkpn_clear: FISCHER 97752 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97752 sr_ns: FISCHER97752
r: 87051263 p: 1.75 pid: 16018 b: FISCHER q: 0 st: lt: 8 ean: 4048962115352 sr: FISCHER 512258 sr_no_br: 512258 sr_no_br_cl: 512258 sr_cl: FISCHER512258 sr_dash: sold: 175 p_range: none act: 1 avo: av: Wire dimension 6 mm Overall length 48 mm Material Steel Surface treatment Zinc plated Drilling diameter 8 mm n: FISCHER EXA-IG M6 express anchor - 512258 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description: The fischer bolt anchor EXA is a particularly installation-friendly steel anchor with an internal thread for anchorings in non-cracked concrete. The two expansion clips increase the expansion range and reduce the torque slippage. In the stainless steel design, the bolt anchor with internal thread is suitable for the anchoring of railings, cantilevers, and cable trays outside. Thanks to the internal thread, threaded rods and metric screws for fixture anchoring can be installed and removed with a low amount of effort. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. *) not covered by technical approval Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor kpn: EXA-IG M6 kpn_dash: EXA kpn_clear: EXAIGM6 bkpn: FISCHER EXA-IG M6 bkpn_clear: FISCHER EXAIGM6 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 512258 sr_ns: FISCHER512258
r: 87990107 p: 0.125 pid: 74671 b: FISCHER q: 0 st: lt: 6 ean: 4006209248294 sr: FISCHER 24829 sr_no_br: 24829 sr_no_br_cl: 24829 sr_cl: FISCHER24829 sr_dash: sold: 162.5 p_range: none act: 1 avo: av: Wall plug type Universal plug n: FISCHER 24829 plug SX 10 x 80 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description: The powerful nylon fixing with four-way expansion and larger anchoring depth. The fischer expansion plug SX transfers force optimally in the building material through the 4-way expansion. Apart from the typical expansion, the high-quality nylon used for its production guarantees secure and permanent fixing. The plug is available in sizes from 4 x 20 to 16 x 80 mm and optionally with screws. The fischer expansion plug SX is the first choice when fixing, for example, lighting, lasts, bath and toilet installations and light wall cabinets in concrete and aerated concrete, but also in masonry made from solid or hollow building materials. The variants with preshaped edges prevent the plug from slipping into the drill hole. The variants with larger anchorage depths are Ideal for fixings in hollow building materials, in aerated concrete and for plaster covering. Top Features Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials. No expansion pressure on the plug neck. This means that tiles or plaster are not damaged. Greater anchorage depth: better force transition in hollow building materials and aerated concrete. Advantages The 4-way expansion provides the optimum force distribution in the material, and offers high load-bearing capacities in solid and hollow building materials. The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster. The pronounced rim prevents the plug from slipping into the drill hole, thus allowing for a simple installation. The greater anchorage depth of the SX 6x50, 8x65 and 10x80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster. Applications Lighting Wardrobes Motion detectors Skirting Light shelves Mirror cabinets Letter boxes TV consoles Trellis Folding shutters Bath and toilet installations Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Functioning The SX is suitable for pre-positioned and push-through installation. When turning in the screw, the SX expands in four directions, thus providing a secure anchoring in the building material. The required screw length is given by: Plug length + fixture thickness + 1 x screw diameter. Suitable for wood, chipboard and spacing screws (fischer ASL, see page ). ds: dsc: kts: plug SX 10 x 80 kpn: 24829 kpn_dash: kpn_clear: 24829 bkpn: FISCHER 24829 bkpn_clear: FISCHER 24829 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug sr_no_br_cl_ns: 24829 sr_ns: FISCHER24829
r: 87051197 p: 3.87 pid: 76292 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 97751 sr_no_br: 97751 sr_no_br_cl: 97751 sr_cl: FISCHER97751 sr_dash: sold: 154.8 p_range: none act: 1 avo: av: Drilling diameter 16 mm Thread dimension M16 Effective length 10 mm Overall length 110 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER 97751 express anchor EXA 16/10 (16x110) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 16/10 (16x110) electrolytically galvanised steel kpn: 97751 kpn_dash: kpn_clear: 97751 bkpn: FISCHER 97751 bkpn_clear: FISCHER 97751 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97751 sr_ns: FISCHER97751
r: 87051186 p: 4.24 pid: 76286 b: FISCHER q: 0 st: lt: 8 ean: 4006209977415 sr: FISCHER 97741 sr_no_br: 97741 sr_no_br_cl: 97741 sr_cl: FISCHER97741 sr_dash: sold: 106 p_range: none act: 1 avo: av: Drilling diameter 10 mm Thread dimension M10 Effective length 140 mm Overall length 217 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER 97741 express anchor EXA 10/140 (10x217) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 10/140 (10x217) electrolytically galvanised steel kpn: 97741 kpn_dash: kpn_clear: 97741 bkpn: FISCHER 97741 bkpn_clear: FISCHER 97741 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 97741 sr_ns: FISCHER97741
r: 02020687 p: 5.32 pid: 16013 b: FISCHER q: 0 st: lt: 8 ean: 4048962000986 sr: FISCHER 500545 sr_no_br: 500545 sr_no_br_cl: 500545 sr_cl: FISCHER500545 sr_dash: sold: 53.2 p_range: none act: 1 avo: av: For diameter 16 mm Conseils de prudence (P) P280 ADR packing group Length 160 mm UN number Principal hazard property GHS07 Harmful or irritant ADR class H-statements H317; H411 Physical state Solid Flash point >100 °C Drill hole depth 175 mm Drilling diameter 18 mm Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard n: FISCHER 500545 chemical capsule FHB II-PF 16 x 160 fast-curing cn: CHEMICAL ANCHOR cn2: CHEMICAL ANCHOR cn_clear: CHEMICALANCHOR d: Product description Fast-curing capsule with high performance in cracked concrete. The fischer cartridge FHB II-PF HIGH SPEED is a system component of the fischer Highbond system FHB II for fixing in cracked and non-cracked concrete. The mortar cartridge contains a styrene-free vinyl ester mortar and sets very quickly. The mortar cartridge can be used with the fischer Highbond anchor rods FHB II-A S (standard), Highbond anchor rods FHB II-A L (long) made of zinc-plated steel, made of stainless steel, and made of highly corrosion-resistant steel. The fischer rod anchor are set with the setting tool RA-SDS through rotating and hitting motions using a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that façades, machines, and steel constructions are securely installed within internal and external areas. Same load level as with injection mortar - but without drill hole cleaning Very fast curing. This mainly lowers waiting time for series installations Maximum load values in cracked concrete. Thus fewer fixing points are necessary Pre-portioned quantities are especially cost-effective for individual fixings. This reduces installation time and lowers costs ETA approval for cracked concrete The pre-portioned resin capsule FHB II-P can be used in uncleaned drill holes, making it the economical and quick solution It is also ideal for individual applications or under water The special formulation used in the resin capsule FHB II-PF HIGH SPEED ensures particularly fast setting and thus large time savings Suitable for The resin capsules FHB II-P and FHB II-PF HIGH SPEED are suitable for pre-positioned installation When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool for this When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: chemical capsule FHB II-PF 16 x 160 fast-curing kpn: 500545 kpn_dash: kpn_clear: 500545 bkpn: FISCHER 500545 bkpn_clear: FISCHER 500545 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Chemical anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer chemical anchor sr_no_br_cl_ns: 500545 sr_ns: FISCHER500545
r: 87051305 p: 59.26 pid: 74574 b: FISCHER q: 0 st: lt: 8 ean: 4006209606759 sr: FISCHER 60675 sr_no_br: 60675 sr_no_br_cl: 60675 sr_cl: FISCHER60675 sr_dash: sold: 0 p_range: none act: 1 avo: av: Drilling diameter 22 mm Effective length 25 mm Overall length 156 mm Material (bolt) Stainless steel A4 Thread dimension M16 n: FISCHER 60675 zykon piercing anchor FZA 22 x 125 M16/25 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The undercut anchor made of A4 stainless steel for through-type installations in cracked concrete. The fischer ZYKON undercut anchor FZA-D is an anchor made from zinc-plated, stainless, and highly corrosion-resistant steel. The optimum interaction of the threaded bolt and sleeve enables a really high shear load. The undercut drill hole is created in a single work step with the special drill bit FZUB. The undercut anchor is set in a push-through installation. With the setting tool FZE Plus, the expansion sleeve is pressed over the cone and fills the undercut drill hole in a positive-locking manner. This ensures top safety even for large crack widths. The European Technical Approval and classification into fire resistance class R 120 ensure added safety. Top Features Maximum safety due to a positive fit connection. Low axial and edge distances due to expansion pressure-free installation. Fast installation, no exchanging tools. This saves time and costs. For time-saving push-through installation. Made of stainless steel for fixings used outside. Advantages The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks. The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use. The FZUB special drill allows for a fast installation by creating the undercut without having to change tools. The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation. The ideal interaction of threaded bolts and sleeve with FZA-D allows for a high shear load and therefore fewer fixing points. Applications Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Stainless steel Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The FZA-D is suitable for push-through installation. The undercut drill hole is created using the special FZUB drill. Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit. ds: dsc: kts: zykon piercing anchor FZA 22 x 125 M16/25 R stainless steel kpn: 60675 kpn_dash: kpn_clear: 60675 bkpn: FISCHER 60675 bkpn_clear: FISCHER 60675 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60675 sr_ns: FISCHER60675
r: 03308159 p: 29.54 pid: 176206 b: FISCHER q: 0 st: lt: 10 ean: 4048962482294 sr: FISCHER 567903 sr_no_br: 567903 sr_no_br_cl: 567903 sr_cl: FISCHER567903 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: n: FISCHER 567903 FixTainer - dowel set SX Plus 5,6 and 8 H with hooks (128 pcs) cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description fischer FixTainer - for everyone who plans big. The SX Plus plug and screw box contains the fischer plugs SX Plus and the corresponding screws and hooks. The FixTainer boxes come with a carry handle and transparent lid. They can be firmly connected together and thus stacked. In addition, they are compatible with the Sortimo L-Boxx system. With the practical click system for connecting multiple FixTainers together - for easy transport Simple to assemble: The edge of the plug prevents it from falling deeper into the drill hole No expansion pressure on the plug neck. This means that tiles or plaster are not damaged With the appropriate screw for maximum hold Optimum force transmission due to four-way expansion. This allows for high holding values in solid and hollow building materials ds: dsc: Scope of delivery 50x SX Plus 5x 25 25x screw 3.5x 35 50x SX Plus 6x 30 25x screw 4,5x 40 20x SX Plus 8x 40 10x Screw 5,0x 55 8x Hook Fast&Fix black 8x Hook Fast&Fix white 8x GKM 8x round head screw 4.5x 35 kts: FixTainer - dowel set SX Plus 5,6 and 8 H with hooks (128 pcs) kpn: 567903 kpn_dash: kpn_clear: 567903 bkpn: FISCHER 567903 bkpn_clear: FISCHER 567903 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer plug assortment sr_no_br_cl_ns: 567903 sr_ns: FISCHER567903
r: 87051313 p: 29.07 pid: 16301 b: FISCHER q: 0 st: lt: 8 ean: 4006209607879 sr: FISCHER 60787 sr_no_br: 60787 sr_no_br_cl: 60787 sr_cl: FISCHER60787 sr_dash: sold: 0 p_range: none act: 1 avo: av: Wire dimension 10 mm n: FISCHER FZA 18x80 M10 R Zykon female threaded anchor stainless steel - 60787 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description: The internally threaded anchor consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON internal threaded anchor FZA-I is made from zinc-plated and stainless steel. The metric internal thread allows for the use of conventional screws or threaded rods. The plug construction also enables surface-flush removal. The undercut drill hole is created in a single work step with the special drill bit FZUB. The undercut anchor is set in a pre-positioned installation. With the setting tool FZE Plus, the expansion sleeve is pushed over the cone and fills the undercut drill hole in a positive-locking manner. This ensures top safety even for large crack widths. The European Technical Approval and classification into fire resistance class R 120 ensure added safety. Top Features Maximum safety due to a positive fit connection. High flexibility due to using conventional metric screws and threaded rods. Fast installation, no exchanging tools. This saves time and costs. ETA approval for cracked concrete and fire resistance class R 120. Made of stainless steel for fixings used outside. Advantages The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks. The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use. The FZA-I allows for surface flush removal and reuse of the fixing point, and therefore offers the best possible flexibility. Furthermore, the ZYKON undercut anchor FZA-I offers all the benefits of the FZA. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Versions Zinc-plated steel Stainless steel Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning FZA-I with internal thread is suitable for pre-positioned installation. The undercut drill hole is created using the special FZUB drill. Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit. ds: dsc: kts: Zykon female threaded anchor stainless steel kpn: FZA 18x80 M10 R kpn_dash: kpn_clear: FZA18x80M10R bkpn: FISCHER FZA 18x80 M10 R bkpn_clear: FISCHER FZA18x80M10R c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 60787 sr_ns: FISCHER60787
r: 87051208 p: 21.63 pid: 74525 b: FISCHER q: 0 st: lt: 8 ean: 4048962115314 sr: FISCHER 512254 sr_no_br: 512254 sr_no_br_cl: 512254 sr_cl: FISCHER512254 sr_dash: sold: 0 p_range: none act: 1 avo: av: Drilling diameter 24 mm Thread dimension M24 Effective length 40 mm Overall length 253 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated n: FISCHER 512254 express anchor EXA 24/40 (24x250) electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The installation-friendly fixing for non-cracked concrete. The fischer bolt anchor EXA is a particularly installation-friendly steel anchor for anchorings in non-cracked concrete. In the zinc-plated steel design, the bolt anchor is suitable for the anchoring of railings, cantilevers, and cable trays inside. The two expansion clips increase the expansion range and reduce the torque slippage. This saves time during the installation process. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. Top Features The bolt anchor with the two expansion clips: fast, simple fixing. Less assembly time due to lower torque slippage. When hammering in, the drive-in pin protects the thread from damage. This saves time during installation and removal. Advantages The two clips increase the expansion range and reduce the torque slippage. This allows for a fast and simple installation. The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture. The short version EXA K*) can be used in thinner components due to the low anchorage depth. Applications Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The EXA is suitable for pre-positioned and push-through installation. Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). When applying the torque, the cone bolt is pulled into the expansion clips and expands these against the drill hole wall. In the case of series installation, we recommend using the FABS bolt anchor setting tool. ds: dsc: kts: express anchor EXA 24/40 (24x250) electrolytically galvanised steel kpn: 512254 kpn_dash: kpn_clear: 512254 bkpn: FISCHER 512254 bkpn_clear: FISCHER 512254 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 512254 sr_ns: FISCHER512254
r: 87051285 p: 21.63 pid: 74398 b: FISCHER q: 0 st: lt: 8 ean: 4006209607664 sr: FISCHER 60766 sr_no_br: 60766 sr_no_br_cl: 60766 sr_cl: FISCHER60766 sr_dash: sold: 0 p_range: none act: 1 avo: av: Drilling diameter 14 mm Effective length 50 mm Overall length 126 mm Material (bolt) Stainless steel A4 Thread dimension M10 n: FISCHER 60766 zykon anchor FZA 14 x 60 M10/50 R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description: The system consists of stainless steel for optimum safety in cracked concrete. The fischer ZYKON undercut anchor FZA is an anchor made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The undercut anchor is ideal for anchoring façades, railings, and steel constructions in cracked concrete, both inside and outside. The undercut drill hole is created in a single work step with the special drill bit FZUB. The undercut anchor is set in a pre-positioned and push-through installation. With the setting tool FZE Plus, the expansion sleeve is pressed over the cone and fills the undercut drill hole in a positive-locking manner. This ensures top safety even for large crack widths. The European Technical Approval and classification into fire resistance class R 120 ensure added safety. Top Features Maximum safety due to a positive fit connection. Low axial and edge distances due to expansion pressure-free installation. Fast installation, no exchanging tools. This saves time and costs. Power-saving installation with low setting energy. ETA approval for cracked concrete and fire resistance class R 120. Advantages The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks. The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use. The FZUB special drill allows for a fast installation by creating the undercut without having to change tools. The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation. Applications Steelwork constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades Versions Zinc-plated steel Stainless steel Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Functioning The FZA is suitable for pre-positioned installation. The undercut drill hole is created using the special FZUB drill. Once the anchor has been placed in the drill hole, the expansion sleeve is driven over the cone using the FZE Plus setting tool, and the undercut drill hole is filled with a positive fit. ds: dsc: kts: zykon anchor FZA 14 x 60 M10/50 R stainless steel kpn: 60766 kpn_dash: kpn_clear: 60766 bkpn: FISCHER 60766 bkpn_clear: FISCHER 60766 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 60766 sr_ns: FISCHER60766
