r: 87992989 p: 0.5 pid: 74977 b: FISCHER q: 0 st: lt: 4 ean: 4048962164855 sr: FISCHER 519772 sr_no_br: 519772 sr_no_br_cl: 519772 sr_cl: FISCHER519772 sr_dash: sold: 100 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Thread designation M5 Application Construction board With screw Yes Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 45 mm Length (Wall plug) 37 mm n: FISCHER 519772 Metal hollow wall plug HM 5 x 37 S with metric screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile metal cavity fixing with metric screw. The fischer cavity metal anchor HM-S is a versatile cavity fixing with a metric screw for all panel building materials. The fixing is set with the fischer installation pliers HM-Z 1 in the pre-positioned installation. The fixing is pulled in the cavity against the board building material with the pliers. In this case, the expanding arms swing open and press onto the reverse side of the board. Alternatively, assembly can be carried out either with a screwdriver or a cordless screwdriver. The cavity metal anchor HM-S is suitable for fixing lights, towel rails, and curtain rails. Removal and installation of the attachment can be repeated without reducing load-carrying properties. This increases flexibility High load capacity due to the large supporting surface provided by the expansion arms Turning lock for convenient assembly: Claws on the edge of the fixing secure the fixing in board building material Suitable for pre-positioned installation Complete with metric screw Due to the extensive range, the HM is suitable for board building materials with a thickness of 3-50 mm and thus suitable for a number of different applications The metric internal thread allows the attachment to be removed and refitted several times, thus offering the best possible flexibility The HM's expanding arms ensure a large supporting surface, thus allowing a high load-bearing capacity The claws around the edge of the fixing penetrate the board building material, preventing the fixing from rotating, thus ensuring a secure installation Suitable for The metal cavity fixing HM is suitable for pre-positioned installation The fixing should be selected based on the thickness of the board building material, to allow the very best expansion in the cavity During installation, the expanding arms swing open and press onto the reverse side of the board The HM can be installed using installation pliers. If using a battery operated screwdriver or screwdriver for installation, the pre-assembled screws must be removed first. When screwing in and expanding the fixing, the attachment, or a max. 6 mm plate, needs to be used as a turning stop Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs Light building boards made of wood wool Chipboard Plywood boards Application Pictures Lighting Light shelves Towel rails Mirror cabinets Curtain rails Sub-structures ds: dsc: kts: Metal hollow wall plug HM 5 x 37 S with metric screw kpn: 519772 kpn_dash: kpn_clear: 519772 bkpn: FISCHER 519772 bkpn_clear: FISCHER 519772 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 519772 sr_ns: FISCHER519772
r: 02020184 p: 4.88 pid: 96807 b: FISCHER q: 0 st: lt: 8 ean: 4006209972571 sr: FISCHER 97257 sr_no_br: 97257 sr_no_br_cl: 97257 sr_cl: FISCHER97257 sr_dash: sold: 97.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Length 75 mm Anchoring depth 75 mm Width across flats 19 mm Effective length 10 mm Drill hole depth 90 mm Drilling diameter 12 mm n: FISCHER 97257 highbond anchor FHB II-A S M12 x 75/10 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M12 x 75/10 ev kpn: 97257 kpn_dash: kpn_clear: 97257 bkpn: FISCHER 97257 bkpn_clear: FISCHER 97257 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97257 sr_ns: FISCHER97257
r: 02062543 p: 0.137 pid: 20601 b: FISCHER q: 0 st: lt: 8 ean: 4006209797297 sr: FISCHER 79729 sr_no_br: 79729 sr_no_br_cl: 79729 sr_cl: FISCHER79729 sr_dash: sold: 95.9 p_range: none type: standard act: 1 avo: 1 av: Outer diameter 40 mm Thickness 3 mm For bolt M8 Inner diameter 8,4 mm n: FISCHER 79729 washer U 8 x 40 cn: WASHER cn2: WASHER cn_clear: WASHER d: Product description Washer for fischer installation system. The fischer washer U is a mounting element for the fischer installation system. The washer is produced from high-quality steel and zinc-plated in lie with DIN EN 10139. Made of zinc-galvanised steel Universal use Application For use in dry interior areas For indoor and outdoor application For indoor and outdoor applications and in environments with high stress to components due to corrosion ds: dsc: kts: washer U 8 x 40 kpn: 79729 kpn_dash: kpn_clear: 79729 bkpn: FISCHER 79729 bkpn_clear: FISCHER 79729 c_path: Home / Fasteners and machine components / Fasteners / Rings and plates / Washer | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rings and plates / Fischer washer sr_no_br_cl_ns: 79729 sr_ns: FISCHER79729
r: 02020201 p: 4.66 pid: 16149 b: FISCHER q: 0 st: lt: 8 ean: 4006209970331 sr: FISCHER 97033 sr_no_br: 97033 sr_no_br_cl: 97033 sr_cl: FISCHER97033 sr_dash: sold: 93.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 60 mm Anchoring depth 60 mm Width across flats 13 mm Effective length 30 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97033 highbond anchor FHB II-A L M8 x 60/30 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tensile loads. The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M8 x 60/30 ev kpn: 97033 kpn_dash: kpn_clear: 97033 bkpn: FISCHER 97033 bkpn_clear: FISCHER 97033 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97033 sr_ns: FISCHER97033
r: 02824732 p: 0.084 pid: 176015 b: FISCHER q: 600 st: 1 lt: 1 ean: 4048962293296 sr: FISCHER 541898 sr_no_br: 541898 sr_no_br_cl: 541898 sr_cl: FISCHER541898 sr_dash: sold: 92.4 p_range: none type: standard act: 1 avo: 1 av: Length 80 mm n: FISCHER 541898 clamping sleeve FNH 6 x 80 cn: NAIL SLEEVE cn2: NAIL SLEEVE cn_clear: NAILSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: clamping sleeve FNH 6 x 80 kpn: 541898 kpn_dash: kpn_clear: 541898 bkpn: FISCHER 541898 bkpn_clear: FISCHER 541898 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541898 sr_ns: FISCHER541898
r: 08096965 p: 4.59 pid: 176302 b: FISCHER q: 0 st: lt: 8 ean: 4048962463163 sr: FISCHER 564691 sr_no_br: 564691 sr_no_br_cl: 564691 sr_cl: FISCHER564691 sr_dash: sold: 91.8 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 10 mm Overall length 95 mm Material (bolt) Stainless steel Surface treatment (bolt) None Thread designation M10 n: FISCHER 564691 Piercing anchor FAZ II Plus 10/10 H R stainless steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description With cap nut. For highest demands. Powerful and flexible. The fischer bolt anchor FAZ II Plus H is the steel anchor for highest demands. The new sizes of the special cap nut version (M10 and M12) are also implemented in the ETA assessment and it is ideal for architecturally sophisticated applications. Thanks to variable anchorage depths and easy installation, the FAZ II Plus can be used in many different ways. The tried-and-trusted expansion clip securely feeds the loads into the concrete and ensures a high load-bearing-capacity. The FAZ II Plus H is the optimal solution (for example) for the anchorage of railings in visible areas: The cap nut, not only gives the option for a better and refined optical design but also, ensures an accident free installation due to its closed shape. Quick and easy assembly without the need for drill hole cleaning (M8-M24) Stainless steel: maximum safety for outdoor use Decisive increase in tensile load-bearing capacity due to the new assessment (ETA) - fewer fixing points and smaller anchor plates save time and costs Highest durability over a service life of 120 years is confirmed by the external test certificate of the FAZ II Plus (M10-M16) Highest seismic loads for diameters M10-M24 with and without the use of the filling disc FFD Millimeter accurate adjustment to the loads due to the variable anchoring depths The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation The cap nut is implemented in the ETA assessment and it is ideal for architecturally sophisticated applications Due to its closed shape, the cap nut version ensures an accident free installation Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The variable anchorage depths allow a millimetre-accurate adjustment to the loads Suitable for The FAZ II Plus H is suitable for pre-positioned and push-through installation When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved Building materials Approved for: Beton C20/25 bis C50/60, gerissen und ungerissen Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Guard rails Consoles ds: dsc: kts: Piercing anchor FAZ II Plus 10/10 H R stainless steel kpn: 564691 kpn_dash: kpn_clear: 564691 bkpn: FISCHER 564691 bkpn_clear: FISCHER 564691 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564691 sr_ns: FISCHER564691
r: 03297779 p: 0.45 pid: 176149 b: FISCHER q: 80 st: 1 lt: 1 ean: 4048962262216 sr: FISCHER 538254 sr_no_br: 538254 sr_no_br_cl: 538254 sr_cl: FISCHER538254 sr_dash: sold: 90 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 14 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 90 mm Length (Wall plug) 70 mm n: FISCHER 538254 DuoPower 14x70 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 20) 20x DuoPower 14x 70 kts: DuoPower 14x70 kpn: 538254 kpn_dash: kpn_clear: 538254 bkpn: FISCHER 538254 bkpn_clear: FISCHER 538254 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538254 sr_ns: FISCHER538254
r: 87030007 p: 0.12 pid: 74331 b: FISCHER q: 400 st: 1 lt: 1 ean: 4006209501122 sr: FISCHER 50112 sr_no_br: 50112 sr_no_br_cl: 50112 sr_cl: FISCHER50112 sr_dash: sold: 90 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application Brick; Concrete; Aerated concrete; Construction board type (screw head) Drilling diameter 12 mm n: FISCHER 50112 plug S 12 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 12 kpn: 50112 kpn_dash: kpn_clear: 50112 bkpn: FISCHER 50112 bkpn_clear: FISCHER 50112 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50112 sr_ns: FISCHER50112
r: 02776747 p: 0.88 pid: 22088 b: FISCHER q: 0 st: lt: 4 ean: 4048962251364 sr: FISCHER 536853 sr_no_br: 536853 sr_no_br_cl: 536853 sr_cl: FISCHER536853 sr_dash: sold: 88 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 30 mm Length 80 mm n: FISCHER 536853 concrete screw FBS II 8x80 30/15 hexagon head with TX recess cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x80 30/15 hexagon head with TX recess kpn: 536853 kpn_dash: kpn_clear: 536853 bkpn: FISCHER 536853 bkpn_clear: FISCHER 536853 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536853 sr_ns: FISCHER536853
r: 03308135 p: 0.08 pid: 176218 b: FISCHER q: 2350 st: 1 lt: 1 ean: 4048962480849 sr: FISCHER 568010 sr_no_br: 568010 sr_no_br_cl: 568010 sr_cl: FISCHER568010 sr_dash: sold: 88 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 70 mm Length (Wall plug) 50 mm n: FISCHER 568010 plug SX Plus 10 x 50 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Plug edge prevents slipping deeper into the drill hole Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 50) 50x SX Plus 10x50 kts: plug SX Plus 10 x 50 kpn: 568010 kpn_dash: kpn_clear: 568010 bkpn: FISCHER 568010 bkpn_clear: FISCHER 568010 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 568010 sr_ns: FISCHER568010
r: 83943379 p: 1.16 pid: 56239 b: FISCHER q: 25 st: 1 lt: 1 ean: 4006209801871 sr: FISCHER 80187 sr_no_br: 80187 sr_no_br_cl: 80187 sr_cl: FISCHER80187 sr_dash: sold: 87 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 100 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw Yes Application Construction board Drilling diameter 16 mm n: FISCHER 80187 rocker plug KD 5 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing for different board thicknesses with wide transition beams. With the fischer toggle fixing KD lightweight components such as light shelves and wall cabinets can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long threaded rod. Use with various panel thicknesses and attachment thicknesses No installation tool necessary Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: rocker plug KD 5 kpn: 80187 kpn_dash: kpn_clear: 80187 bkpn: FISCHER 80187 bkpn_clear: FISCHER 80187 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 80187 sr_ns: FISCHER80187
r: 02062527 p: 0.29 pid: 10664 b: FISCHER q: 0 st: lt: 8 ean: 4006209797693 sr: FISCHER 79769 sr_no_br: 79769 sr_no_br_cl: 79769 sr_cl: FISCHER79769 sr_dash: sold: 87 p_range: none type: standard act: 1 avo: 1 av: Length 100 mm n: FISCHER 79769 setscrew GS 10x100 cn: THREADED STUD cn2: THREADED STUD cn_clear: THREADEDSTUD d: Product description Universal threaded pin for mounting pipes. The fischer threaded pin GS is a connection element between the fixing point in the load-bearing element and the fastening element on the suspended or elevated element. For example, pipes or ventilation ducts are fixed to it. The threaded rod is made of high-quality steel. Zinc-galvanised Simple to assemble Ideal for fischer installation systems Application For use in dry interior areas For indoor and outdoor applications and in environments with high stress to components due to corrosion ds: dsc: kts: setscrew GS 10x100 kpn: 79769 kpn_dash: kpn_clear: 79769 bkpn: FISCHER 79769 bkpn_clear: FISCHER 79769 c_path: Home / Fasteners and machine components / Fasteners / Threaded rods and threaded ends / Threaded stud | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer threaded rods and threaded ends / Fischer threaded stud sr_no_br_cl_ns: 79769 sr_ns: FISCHER79769
r: 02648555 p: 0.85 pid: 28634 b: FISCHER q: 0 st: lt: 7 ean: 4006209886809 sr: FISCHER 88680 sr_no_br: 88680 sr_no_br_cl: 88680 sr_cl: FISCHER88680 sr_dash: sold: 85 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 200 mm Length (Wall plug) 182 mm n: FISCHER 88680 frame plug F 10 M 182 electrolytically galvanised steel cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The screw fixing with countersunk head for the stress-free installation of window and door frames. The fischer metal frame fixing F-M is a special plug for the stress-free, lasting stand-off installation of window and door frames and of squared timbers. It consists of a metal sleeve and a zinc-plated steel screw. The F-M is set in a time-saving push-through installation. When the screw is tightened, the cone is pulled into the plug sleeve and expands against the wall of the drill hole. This ensures a fixation that is free from tensile force and pressure, thus guaranteeing a secure hold in solid and hollow building materials. The F-M is tested for fire resistance class R120, and offers safety for fire-protection-relevant applications. The F-M metal frame plug achieves fire resistance R 120. This allows for use in areas where fire resistance is relevant The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame The cover caps (available separately) can be used to discreetly cover the screw heads Suitable for The F-M is suitable for push-through installation By tightening the screw, the cone is drawn into the sleeve and the fixing is expanded which wedges it inside the drill hole. The window frames are thus fixed in a stress-free manner The maximum installation torque is 5 Nm Building materials Concrete Vertically perforated brick Hollow blocks made from lightweight concrete Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick made from lightweight concrete Solid brick Application Window frames Door frames Squared timbers ds: dsc: kts: frame plug F 10 M 182 electrolytically galvanised steel kpn: 88680 kpn_dash: kpn_clear: 88680 bkpn: FISCHER 88680 bkpn_clear: FISCHER 88680 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 88680 sr_ns: FISCHER88680
r: 87051159 p: 8.43 pid: 75745 b: FISCHER q: 0 st: lt: 8 ean: 4006209522042 sr: FISCHER 52204 sr_no_br: 52204 sr_no_br_cl: 52204 sr_cl: FISCHER52204 sr_dash: sold: 84.3 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 300/315 mm Overall length 420 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M16 n: FISCHER 52204 fastening anchor FBN II 16/300 GS with large washer ev cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing with large washer for flexible use in non-cracked concrete. The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions. The large washer increases the size of the supporting surface. For the fixing of timber constructions Pre-assembled washer saves time during installation The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction The pre-fitted washer ensures a fast assembly The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required The anchor is also ideal for large fixture thicknesses The long thread balances component tolerances and stand-off installations, and thus increases flexibility Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture Suitable for The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: fastening anchor FBN II 16/300 GS with large washer ev kpn: 52204 kpn_dash: kpn_clear: 52204 bkpn: FISCHER 52204 bkpn_clear: FISCHER 52204 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 52204 sr_ns: FISCHER52204
r: 02019405 p: 0.54 pid: 11060 b: FISCHER q: 0 st: lt: 5 ean: 4006209483237 sr: FISCHER 48323 sr_no_br: 48323 sr_no_br_cl: 48323 sr_cl: FISCHER48323 sr_dash: sold: 81 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x40 weft anchor zinc plated - 48323 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M8x40 kpn_dash: kpn_clear: EAIIM8x40 bkpn: FISCHER EA II M8x40 bkpn_clear: FISCHER EAIIM8x40 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48323 sr_ns: FISCHER48323
r: 87050190 p: 3.93 pid: 176370 b: FISCHER q: 0 st: lt: 8 ean: 4006209502891 sr: FISCHER 50289 sr_no_br: 50289 sr_no_br_cl: 50289 sr_cl: FISCHER50289 sr_dash: sold: 78.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 16 mm Length 300 mm n: FISCHER 50289 anchor rod RG M16 x 300 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M16 x 300 electrolytically zinc-plated 5.8 kpn: 50289 kpn_dash: kpn_clear: 50289 bkpn: FISCHER 50289 bkpn_clear: FISCHER 50289 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50289 sr_ns: FISCHER50289
r: 02137020 p: 0.98 pid: 176201 b: FISCHER q: 0 st: lt: 10 ean: 4006209956984 sr: FISCHER 95698 sr_no_br: 95698 sr_no_br_cl: 95698 sr_cl: FISCHER95698 sr_dash: sold: 78.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Length 150 mm n: FISCHER 95698 anchor rod RG M8 x 150 electrolytically zinc-plated 5.8 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The proven rod anchor for internal use with a mortar cartridge or injection mortar. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5. 8. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas. Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge Zinc-galvanised steel for internal use The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety Please refer to the approvals for the resin capsules and mortar used Suitable for Due to its oblique edge, the anchor rod RG M is particularly suitable for use in conjunction with resin capsules The anchor rod RG M is set using a hammer drill and the accompanying setting tool in rotating and hitting motions During setting, the oblique edge of the RG M destroys the capsule, and mixes and activates the mortar Use with injection mortar is also possible. Here, the anchor rod is manually inserted into the drill hole with a light rotating movement until it reaches the base of the hole Building materials In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete In connection with several fischer injection mortars approved or suitable for different building materials Application Anchorings with resin capsule RSB and RSB mini Anchorings with resin capsule RM II Anchorings with each of the fischer injection mortars FIS SB, FIS EM, FIS EB II, FIS V, FIS VL, FIS V Zero, FIS P Plus, FIS P, FIS EP and FIS Green ds: dsc: kts: anchor rod RG M8 x 150 electrolytically zinc-plated 5.8 kpn: 95698 kpn_dash: kpn_clear: 95698 bkpn: FISCHER 95698 bkpn_clear: FISCHER 95698 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 95698 sr_ns: FISCHER95698
r: 02062526 p: 0.26 pid: 10605 b: FISCHER q: 0 st: lt: 8 ean: 4006209797686 sr: FISCHER 79768 sr_no_br: 79768 sr_no_br_cl: 79768 sr_cl: FISCHER79768 sr_dash: sold: 78 p_range: none type: standard act: 1 avo: 1 av: Length 80 mm n: FISCHER 79768 setscrew GS 10x80 cn: THREADED STUD cn2: THREADED STUD cn_clear: THREADEDSTUD d: Product description Universal threaded pin for mounting pipes. The fischer threaded pin GS is a connection element between the fixing point in the load-bearing element and the fastening element on the suspended or elevated element. For example, pipes or ventilation ducts are fixed to it. The threaded rod is made of high-quality steel. Zinc-galvanised Simple to assemble Ideal for fischer installation systems Application For use in dry interior areas For indoor and outdoor applications and in environments with high stress to components due to corrosion ds: dsc: kts: setscrew GS 10x80 kpn: 79768 kpn_dash: kpn_clear: 79768 bkpn: FISCHER 79768 bkpn_clear: FISCHER 79768 c_path: Home / Fasteners and machine components / Fasteners / Threaded rods and threaded ends / Threaded stud | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer threaded rods and threaded ends / Fischer threaded stud sr_no_br_cl_ns: 79768 sr_ns: FISCHER79768
r: 02860727 p: 15.537 pid: 175989 b: FISCHER q: 56 st: 1 lt: 1 ean: 4006209795545 sr: FISCHER 79554 sr_no_br: 79554 sr_no_br_cl: 79554 sr_cl: FISCHER79554 sr_dash: sold: 77.685 p_range: none type: standard act: 1 avo: 1 av: Width 19 mm Thickness 2,4 mm Roll length 10 m n: FISCHER 79554 Mounting strip AHU 19 cn: PERFORATED METAL STRIP cn2: PERFORATED METAL STRIP cn_clear: PERFORATEDMETALSTRIP d: Product description High-quality steel tape with holes for simple installation. The fischer perforated steel tape LBK with cut-out holes for simple installation in plastic-covered versions. The perforated tapes' sheet thicknesses allow the tapes to be easily cut to size using sheet metal shears. The perforated tapes' hole geometry enables ground fixing using the fischer impact nail ED. Protective sheath made of polyethylene The perforated tape's material thicknesses and plastic covering allow the tapes to be easily cut to size using metal shears The perforated tape's hole geometry enables concrete fixing using the fischer impact nail ED Building materials When using impact nail ED: Concrete Application Steel tape with stamped holes for simple installation of pipes on the substrate, e. g. on unfinished floor Available as zinc-plated LBV or plastic-covered LBK The fischer nail anchor FNA II is suitable for ceiling fixing in concrete Use fischer thread hanger RAH for fastening to threaded rods For use in dry interior areas ds: dsc: kts: Mounting strip AHU 19 kpn: 79554 kpn_dash: kpn_clear: 79554 bkpn: FISCHER 79554 bkpn_clear: FISCHER 79554 c_path: Home / Fasteners and machine components / Fasteners / Rails and mounting / Perforated metal strip | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer rails and mounting / Fischer perforated metal strip sr_no_br_cl_ns: 79554 sr_ns: FISCHER79554
r: 03297800 p: 0.119 pid: 176162 b: FISCHER q: 150 st: 1 lt: 1 ean: sr: FISCHER 535459 sr_no_br: 535459 sr_no_br_cl: 535459 sr_cl: FISCHER535459 sr_dash: sold: 77.35 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 45 mm Length (Wall plug) 30 mm n: FISCHER 535459 DuoPower 6x30 with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 6x 30 50x countersunk screw 4.5x 40 kts: DuoPower 6x30 with screw kpn: 535459 kpn_dash: kpn_clear: 535459 bkpn: FISCHER 535459 bkpn_clear: FISCHER 535459 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 535459 sr_ns: FISCHER535459
