r: 08106958 p: 1485.619 pid: 72774 b: FLUKE q: 0 st: lt: 8 ean: 0095969397742 sr: FLUKE 2811808 sr_no_br: 2811808 sr_no_br_cl: 2811808 sr_cl: FLUKE2811808 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700PRV-1 pressure relief valve - 2811808 cn: ACCESSORY/PART PRESSURE TEST PUMP cn2: ACCESSORY/PART PRESSURE TEST PUMP cn_clear: ACCESSORYPARTPRESSURETESTPUMP d: Product description Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar Repeatability up to 10% of nominal setting Installs directly into the 700HTP-1 pump The Fluke 700PRV-1 consists of a relief valve adjustable from 725 to 5800 PSI (50 to 200 bar) for use with the 700HTP-1 hydraulic test pump. The 1/8" NPT male thread fits directly into the Fluke 700HTP-1 pressure pump. For use with the 700HTP-1 hydraulic test pump. The 700PRV uses a multi-turn adjustment screw to set the preload on the internal disc springs. This pressure relief valve protects most commonly used Fluke pressure modules and pressure instruments from damage caused by unintentional overpressure. ds: dsc: kts: pressure relief valve kpn: 700PRV-1 kpn_dash: 700PRV kpn_clear: 700PRV1 bkpn: FLUKE 700PRV-1 bkpn_clear: FLUKE 700PRV1 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part pressure test pump sr_no_br_cl_ns: 2811808 sr_ns: FLUKE2811808
r: 08106967 p: 1461.942 pid: 73475 b: FLUKE q: 0 st: lt: 8 ean: 0095969786584 sr: FLUKE 4636786 sr_no_br: 4636786 sr_no_br_cl: 4636786 sr_cl: FLUKE4636786 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 805ES external vibration sensor for the 805 vibration meter - 4636786 cn: ACCESSORY/PART VIBRATION MEASUREMENT cn2: ACCESSORY/PART VIBRATION MEASUREMENT cn_clear: ACCESSORYPARTVIBRATIONMEASUREMENT d: Product description Flat, angled sensor body allows it to fit into tight spaces The robust spiral cable reduces dangling to a minimum and can be extended over 2 metres if required The powerful U-shaped magnet attachment ensures a secure connection to flat or curved measuring surfaces Robust, sealed cable connector with strain relief reduces cable wear With removable sensor magnet to allow direct connection to a sensor mount or device threaded hole For direct connection to the SMB connector in the heel of the 805 vibration meter The Fluke 805ES is an external vibration sensor that is ideal in situations where it is difficult or impossible to use the vibration sensors of the 805 vibration meter itself. The 805ES allows you to take measurements in congested or hard-to-reach areas, behind machine guards or enclosures, or in poorly accessible areas where it is difficult to apply sufficient manual pressure to the 805 vibration meter. ds: dsc: kts: external vibration sensor for the 805 vibration meter kpn: 805ES kpn_dash: kpn_clear: 805ES bkpn: FLUKE 805ES bkpn_clear: FLUKE 805ES c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part vibration measurement | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part vibration measurement sr_no_br_cl_ns: 4636786 sr_ns: FLUKE4636786
r: 08107020 p: 1416.198 pid: 74218 b: FLUKE q: 0 st: lt: 8 ean: 0095969397735 sr: FLUKE 2811795 sr_no_br: 2811795 sr_no_br_cl: 2811795 sr_cl: FLUKE2811795 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700HTH-1 hydraulic test hose - 2811795 cn: ACCESSORY/PART PRESSURE TEST PUMP cn2: ACCESSORY/PART PRESSURE TEST PUMP cn_clear: ACCESSORYPARTPRESSURETESTPUMP d: Product description Hose and connectors fit directly to the Fluke 700HTP-1 test pressure port Includes plugs and caps to eliminate loss of fluid in the hose, eliminating the need to re-prepare the hose Self-sealing connectors with easy hand-held connections Very low volumetric expansion and negligible pressure loss at nominal pressure The Fluke 700HTH-1 hydraulic test hose is a test hose with a working pressure of 10,000 psi, 690 bar with stainless steel and nylon construction for use when connecting a Fluke 700HTH-1 or other hydraulic test pump to a unit being tested. The Fluke 700HTH-1 can be connected simultaneously to a Fluke pressure module under test and a calibration unit from a Fluke 700HTP-1 hydraulic test pump. The 700HTH-1 is compatible with water and non-corrosive oil. ds: dsc: Scope of delivery Hose with M16X2.0 connectors 2 1/4" male NPT to M16X2.0 connectors 1/4" female NPT to 1/4" male BSP adapter Instruction sheet kts: hydraulic test hose kpn: 700HTH-1 kpn_dash: 700HTH kpn_clear: 700HTH1 bkpn: FLUKE 700HTH-1 bkpn_clear: FLUKE 700HTH1 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part pressure test pump sr_no_br_cl_ns: 2811795 sr_ns: FLUKE2811795
r: 08106969 p: 1411.079 pid: 166190 b: FLUKE q: 0 st: lt: 8 ean: 0095969757942 sr: FLUKE 4531778 sr_no_br: 4531778 sr_no_br_cl: 4531778 sr_cl: FLUKE4531778 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 3310-PR-TF-II flexible current clamp 61cm, 5000A - 4531778 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description AC current clamp that operates on the Rogowski principle Designed for use with the Fluke 1750 Power Recorder Measures current from very low frequencies down to the 50th harmonic of a 50/60 Hz power supply Flexible and lightweight measuring head allows quick and easy installation in hard-to-reach places and around large conductors ds: dsc: kts: flexible current clamp 61cm, 5000A kpn: 3310-PR-TF-II kpn_dash: 3310 kpn_clear: 3310PRTFII bkpn: FLUKE 3310-PR-TF-II bkpn_clear: FLUKE 3310PRTFII c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 4531778 sr_ns: FLUKE4531778
r: 02951724 p: 1217.36 pid: 72033 b: FLUKE q: 0 st: lt: 8 ean: 0095969062022 sr: FLUKE 657202 sr_no_br: 657202 sr_no_br_cl: 657202 sr_cl: FLUKE657202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i3000S AC current clamp - 657202 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: AC current clamp for very high currents Fluke current clamps are the ideal tools for extending the current ranges of Fluke instruments. The i3000s is an AC current clamp for measurements with oscilloscopes and banana-connected multimeters; the current clamp can be connected to these instruments using the supplied double banana plug to BNC adapter. The clamp is optimised for measurements on power distribution systems. ds: dsc: kts: AC current clamp kpn: i3000S kpn_dash: kpn_clear: i3000S bkpn: FLUKE i3000S bkpn_clear: FLUKE i3000S c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 657202 sr_ns: FLUKE657202
r: 02957503 p: 1182.371 pid: 71327 b: FLUKE q: 0 st: lt: 10 ean: 0095969040549 sr: FLUKE 114519 sr_no_br: 114519 sr_no_br_cl: 114519 sr_cl: FLUKE114519 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 80i-110s AC/DC current clamp (100 A) - 114519 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: Fluke current clamps are the ideal tools for extending the current ranges of Fluke test and measurement instruments. The Fluke 80i-110s is an AC/DC current clamp for reproducing current waveforms as found in modern commercial and industrial power distribution equipment.The performance of the probe is optimised for accurate reproduction of currents at power line frequency and up to the 50th harmonic waveform. The 80i-110s is also compatible with any instrument suitable for millivolt measurements. Key features Accurate AC, DC and AC+DC current measurements for electrical, electronic and automotive engineering applications Shielded against the strong interference around electronic motor drives and ignition systems Claw-shaped for good handling in tight spaces Insulated against voltages up to 600 volts, safe BNC - compatible with Fluke ScopeMeters, power harmonics analysers and oscilloscopes Usable with multimeters via an optional PM9081/001 BNC/banana plug adapter One-year warranty ds: dsc: kts: AC/DC current clamp (100 A) kpn: 80i-110s kpn_dash: 80i kpn_clear: 80i110s bkpn: FLUKE 80i-110s bkpn_clear: FLUKE 80i110s c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 114519 sr_ns: FLUKE114519
r: 08107159 p: 1139.173 pid: 166264 b: FLUKE q: 0 st: lt: 8 ean: 0095969344241 sr: FLUKE 2577126 sr_no_br: 2577126 sr_no_br_cl: 2577126 sr_cl: FLUKE2577126 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE EI-1625 current clamp set with EI-162X, EI-162AC and 2-3 wire adapter - 2577126 cn: TEST CLIP SET cn2: TEST CLIP SET cn_clear: TESTCLIPSET d: ds: dsc: Scope of delivery EI-162 AC current clamp EI-162 X current clamp 2-3 wire adapter kts: current clamp set with EI-162X, EI-162AC and 2-3 wire adapter kpn: EI-1625 kpn_dash: EI kpn_clear: EI1625 bkpn: FLUKE EI-1625 bkpn_clear: FLUKE EI1625 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test clip set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test clip set sr_no_br_cl_ns: 2577126 sr_ns: FLUKE2577126
r: 08107175 p: 1132.838 pid: 74242 b: FLUKE q: 0 st: lt: 8 ean: 0195112042908 sr: FLUKE 5347993 sr_no_br: 5347993 sr_no_br_cl: 5347993 sr_cl: FLUKE5347993 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV300/TY1 & TY2 Test adapter set for electric vehicle charging station: Connectors type 1 and 2 - 5347993 cn: ACCESSORY/PART INSTALLATION TESTER cn2: ACCESSORY/PART INSTALLATION TESTER cn_clear: ACCESSORYPARTINSTALLATIONTESTER d: Product description Simulate current capacities of charging cables Simulate charging status of different vehicles Simulate ground fault Includes vehicle connectors with type 1 and type 2 plugs Test in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 The FEV300 test adapter set with type 1 and type 2 connectors is designed to test the operation and safety of charging stations, mode 3, for charging AC traction batteries. The adapter imitates an electric vehicle and starts a charging cycle, activating the voltage/current output, allowing you to perform tests in combination with suitable measuring instruments such as an installation tester (Fluke 1664 FC) and/or an oscilloscope (Fluke 120B series). With the adapter set, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722. PP status (Proximity Pilot) 'cable simulation': the rotary switch for the PP status allows the adapter to simulate different current capabilities of the charging cables CP-status (Control Pilot) 'vehicle simulation': the rotary switch for the CP-status can be used to simulate different charging statuses Simulation of CP fault "E" and simulation of PE fault ("earth fault") Two different connectors Use the FEV300-CON-TY1 Type 1 connector to connect to an EV charging station with a Type 1 with vehicle connector. Use the FEV300-CON-TY2 Type 2 plug to connect to an EV charging station Type 2 with a wall outlet or connect to an EV charging station Type 2 with a vehicle connector. Simplicity and convenience Perform various tests including earth fault checks, wire insulation, voltage measurement and duty cycle to see the max current available for charging an all-in-one adapter that can be safely integrated into the Fluke portfolio of test and measurement tools. With the FEV300, you can simulate CP fault (E) and PE fault (earth fault) and it offers separate phase indication with three LED lights to easily check if voltage is present. No need to bring an electric vehicle on site for fault finding at the charging station: the adapter acts as an electric vehicle when connected to a charging station for easy performance and maintenance testing. Suitable for Fluke 1662 multifunction installation tester Fluke 1663 multifunction installation tester Fluke 1664 FC multifunction installation tester Fluke 87 V digital multimeter Fluke 120B industrial ScopeMeter series handheld oscilloscopes Fluke 1587 FC insulation multimeter Fluke 1732 and 1734 three-phase electrical energy loggers Fluke 1735 three-phase power logger Fluke 1736 and 1738 three-phase Power Quality Loggers ds: dsc: Scope of delivery FEV300/BASIC test adapter FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Carrying bag kts: Test adapter set for electric vehicle charging station: Connectors type 1 and 2 kpn: FEV300/TY1 & TY2 kpn_dash: kpn_clear: FEV300TY1TY2 bkpn: FLUKE FEV300/TY1 & TY2 bkpn_clear: FLUKE FEV300TY1TY2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part installation tester sr_no_br_cl_ns: 5347993 sr_ns: FLUKE5347993
r: 08107147 p: 1109.586 pid: 71820 b: FLUKE q: 0 st: lt: 8 ean: 0195112035016 sr: FLUKE 5315194 sr_no_br: 5315194 sr_no_br_cl: 5315194 sr_cl: FLUKE5315194 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-LITE-M5 software licence code for TruTest Lite (5 workstations) - 5315194 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 5 workstations The ability to assign 2 users to each of the 5 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Lite (5 workstations) kpn: TRUTEST-LITE-M5 kpn_dash: TRUTEST kpn_clear: TRUTESTLITEM5 bkpn: FLUKE TRUTEST-LITE-M5 bkpn_clear: FLUKE TRUTESTLITEM5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315194 sr_ns: FLUKE5315194
r: 08107158 p: 1090.193 pid: 73537 b: FLUKE q: 0 st: lt: 8 ean: 0095969344234 sr: FLUKE 2577115 sr_no_br: 2577115 sr_no_br_cl: 2577115 sr_cl: FLUKE2577115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE EI-1623 current clamp kit for selective/electrodeless measurement - 2577115 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description The current clamp kit for selective/electrodeless measurement is used in conjunction with the Fluke 1623-2 and 1625-2 to perform selective and electrodeless measurements. Selective measurement involves using one current clamp with a number of earth pins to generate earth loop resistance values for one earth electrode. In electrodeless measurement, both current clamps provided are used to measure earth loop resistance without earth electrodes. Both measurement methods have the advantage of being able to measure without interrupting the earthing system! Safer and faster. Already included in the Fluke sets 1623-2 and 1625-2. Both current clamps have an inner diameter of 50.8 mm (2 inches). ds: dsc: kts: current clamp kit for selective/electrodeless measurement kpn: EI-1623 kpn_dash: EI kpn_clear: EI1623 bkpn: FLUKE EI-1623 bkpn_clear: FLUKE EI1623 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 2577115 sr_ns: FLUKE2577115
r: 08107078 p: 1040.454 pid: 71800 b: FLUKE q: 0 st: lt: 8 ean: 0095969765534 sr: FLUKE 4542286 sr_no_br: 4542286 sr_no_br_cl: 4542286 sr_cl: FLUKE4542286 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BTL21 interactive measuring probe for battery analyser with temperature sensor - 4542286 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description Intelligent measurement probe set with integrated IR temperature sensor, designed for the Fluke BT521 battery analyser. The BTL21 has a built-in LCD display, a three-colour LED for warning indication good/false, voice count for battery ID and an integrated storage button. Includes long and short probe extensions for hard-to-reach battery cabinets. ds: dsc: kts: interactive measuring probe for battery analyser with temperature sensor kpn: BTL21 kpn_dash: kpn_clear: BTL21 bkpn: FLUKE BTL21 bkpn_clear: FLUKE BTL21 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 4542286 sr_ns: FLUKE4542286
r: 08107036 p: 1027.231 pid: 74221 b: FLUKE q: 0 st: lt: 8 ean: 0095969867108 sr: FLUKE 4969588 sr_no_br: 4969588 sr_no_br_cl: 4969588 sr_cl: FLUKE4969588 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE BTL20ANG curved intelligent measuring probe set - 4969588 cn: TEST LEAD SET cn2: TEST LEAD SET cn_clear: TESTLEADSET d: Product description Curved probes offer better access to hard-to-reach battery terminals Long and short probe extensions increase versatility CAT II 1000V and CAT III 600V rated Available with the BT520ANG and BT521ANG, or as a standalone accessory, the BTL20ANG intelligent test probe set makes Fluke 500-series battery analysers the ideal measurement tools for maintenance, troubleshooting and to measure performance of individual batteries and battery banks used in critical battery back-up applications. With optimised measurement pin angles and coil placement, the BTL20ANG gives you the manoeuvrability you need to avoid obstacles and get into tight cabinet spaces, all while offering the same CAT II 1000V and CAT III 600V you have come to expect from Fluke battery analysers. ds: dsc: kts: curved intelligent measuring probe set kpn: BTL20ANG kpn_dash: kpn_clear: BTL20ANG bkpn: FLUKE BTL20ANG bkpn_clear: FLUKE BTL20ANG c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test lead set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test lead set sr_no_br_cl_ns: 4969588 sr_ns: FLUKE4969588
r: 02951726 p: 1013.558 pid: 71345 b: FLUKE q: 0 st: lt: 8 ean: 0095969401258 sr: FLUKE 2840311 sr_no_br: 2840311 sr_no_br_cl: 2840311 sr_cl: FLUKE2840311 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i6000S Flex-24 AC current clamp 6000 A (measuring head 24 inches) - 2840311 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: The i6000s Flex is an AC current measurement probe that operates on the Rogowski principle. It can be used for current measurements up to 6000 A when used in combination with oscilloscopes, recorders or data loggers. Thanks to the flexible lightweight measuring head, it can be quickly and easily installed in hard-to-reach places. Measurement head cable length (double insulated): 610 mm (24 inches) ds: dsc: kts: AC current clamp 6000 A (measuring head 24 inches) kpn: i6000S Flex-24 kpn_dash: i6000S Flex kpn_clear: i6000SFlex24 bkpn: FLUKE i6000S Flex-24 bkpn_clear: FLUKE i6000SFlex24 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 2840311 sr_ns: FLUKE2840311
r: 02951719 p: 1013.499 pid: 72020 b: FLUKE q: 0 st: lt: 8 ean: 0095969090476 sr: FLUKE 1568487 sr_no_br: 1568487 sr_no_br_cl: 1568487 sr_cl: FLUKE1568487 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i1000S AC current clamp from 100 mA to 1000 A RMS - 1568487 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: AC current clamp designed for extended oscilloscope applications in industrial environments. Ideal for measuring distorted current waveforms and harmonics. Key features Provides accurate measurements of currents from 100 mA to 1000 A RMS, 5 Hz to 100 kHz without interrupting the circuit A passive filter eliminates noise and ring modulation in rapidly rising di/dt waveforms for accurate screen display Directly connectable to an oscilloscope through an amplified coaxial cable and isolated BNC connector Can be used with multimeters via an optional PM9081/001 BNC/banana plug adapter One year warranty ds: dsc: kts: AC current clamp from 100 mA to 1000 A RMS kpn: i1000S kpn_dash: kpn_clear: i1000S bkpn: FLUKE i1000S bkpn_clear: FLUKE i1000S c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 1568487 sr_ns: FLUKE1568487
