r: 02951129 p: 840 pid: 73262 b: FLUKE q: 0 st: lt: 8 ean: 0095969586658 sr: FLUKE 3947770 sr_no_br: 3947770 sr_no_br_cl: 3947770 sr_cl: FLUKE3947770 sr_dash: sold: 2520 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 27-II industrial multimeter (IP67) - 3947770 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new standard for ruggedness: The Fluke 27 II and 28 II digital multimeters set a new standard for working in harsh conditions, while having the features and accuracy to solve most electrical problems. Both meters are rated to IP 67 (ensuring water and dust tightness), have been submitted to MSHA for approval, have an extended operating temperature range of -15 °C to + 55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) at a relative humidity of 95% and are designed and tested to withstand a 3 m drop. Fluke 20-series multimeters are designed for use in the most demanding environments. Key features Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 200 kHz Enlarged AC voltage bandwidth ? 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II) Built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (28 II) Resistance measurement, dial-through and diode test Min/Max and Average recording for automatic recording of variations Peak min-max (28 II) Unique function for accurate voltage and frequency measurements on variable-speed drives and other devices causing electrical disturbances (28 II) Further features New ? IP 67 protection, i.e. water and dust tight, fully sealed for use in harsh environments Designed to withstand a 3-metre drop (with holster) Display mode with high resolution of 20,000 counts (28 II) True-RMS AC voltage and current for accurate measurements on non-linear signals (28 II) Average response voltage and current for measurements (27 II) New ? Illuminated keys ensure good legibility even in poorly lit environments Large display figures and bright white backlight with two illumination levels for better legibility Reversible holster for extra protection when not in use The meter withstands dangerous voltage peaks of 8,000 V caused by switching loads and by disturbances in industrial circuits. It complies with the second edition of IEC and ANSI safety standards for electrical equipment. Long battery life (800 hours) Relative mode for eliminating test lead resistance when measuring low resistance values Automatic and manual range adjustment for maximum flexibility Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. MSHA approval ds: dsc: Scope of delivery Holster Test leads Alligator clips Printed manual/quick start guide CD ROM manual 3 AA batteries kts: industrial multimeter (IP67) kpn: 27-II kpn_dash: 27 kpn_clear: 27II bkpn: FLUKE 27-II bkpn_clear: FLUKE 27II c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947770 sr_ns: FLUKE3947770
r: 02958382 p: 629.543 pid: 72926 b: FLUKE q: 0 st: lt: 10 ean: 0095969724203 sr: FLUKE 4465618 sr_no_br: 4465618 sr_no_br_cl: 4465618 sr_cl: FLUKE4465618 sr_dash: sold: 2518.172 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE A3000 FC KIT wireless AC current clamp module kit - 4465618 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: Features 3000 FC digital multimeter Fluke's 3000 FC series wireless multimeter with the Fluke Connect app has all the necessary functions and features for easy troubleshooting when testing and measuring: AC and DC voltage measurements up to 1000 V AC and DC current measurements with 0.01 mA resolution Continuity test, resistance measurement, diode test, capacitance and frequency measurements MIN/MAX recording CAT III 1000 V, Cat IV 600 V; IP54 Features a3000 FC The Fluke a3000 FC wireless AC current clamp module is a fully functional True-RMS current clamp that wirelessly transmits readings to other Fluke Connect-enabled master units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke a3000 FC wireless AC current clamp module has all the necessary functions and features for easy troubleshooting when testing and measuring: True-RMS AC current clamp Measurement of up to 400 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function ds: dsc: Scope of delivery Carrying case 3000 FC wireless digital multimeter a3000 FC current clamp module TL175 test leads AC175 alligator clips kts: wireless AC current clamp module kit kpn: A3000 FC KIT kpn_dash: kpn_clear: A3000FCKIT bkpn: FLUKE A3000 FC KIT bkpn_clear: FLUKE A3000FCKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4465618 sr_ns: FLUKE4465618
r: 08107174 p: 2275.991 pid: 166212 b: FLUKE q: 0 st: lt: 8 ean: 0195112050354 sr: FLUKE 5363614 sr_no_br: 5363614 sr_no_br_cl: 5363614 sr_cl: FLUKE5363614 sr_dash: sold: 2275.991 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV300/KIT SCH test adapter set for electric car charging station incl. 1664 fC installation tester - 5363614 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Safely tests PE conductor for possible presence of hazardous voltage with respect to earth Simulate different current capacities of charging cables Simulate charging status of vehicles Simulate PE fault (earth fault) Includes Fluke 1664 FC for performing installation tests and type 2 connector The FEV300 &1664 SCH kit provides an EV charging station test adapter along with a multi-function installation tester. The adapter simulates the presence of an electric vehicle, allowing the user to perform safety and functionality tests in combination with suitable test instruments, such as a multi-function tester, a digital multimeter or an oscilloscope. Use the FEV300 for station installations and to check that the station is operating correctly after installation, during periodic maintenance or troubleshooting if the station does not provide the appropriate charge. ds: dsc: Scope of delivery FEV300/BASIC test adapter 1664 FC multifunctional installation tester FEV300-CON-TY2 Type 2 plug Carrying case kts: test adapter set for electric car charging station incl. 1664 fC installation tester kpn: FEV300/KIT SCH kpn_dash: kpn_clear: FEV300KITSCH bkpn: FLUKE FEV300/KIT SCH bkpn_clear: FLUKE FEV300KITSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5363614 sr_ns: FLUKE5363614
r: 03343204 p: 2220 pid: 166035 b: FLUKE q: 0 st: lt: 10 ean: 0195112119617 sr: FLUKE 5581068 sr_no_br: 5581068 sr_no_br_cl: 5581068 sr_cl: FLUKE5581068 sr_dash: sold: 2220 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1672 SCH FTT multifunctional installation tester with TruTest software in case - 5581068 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1672 multifunction installation tester with the TruTestTM software bundle will revolutionise the way you work. With its ergonomic design, seamless user interface, integrated data management capabilities and comprehensive reporting software, the 1672 sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557.The Fluke 1670-series multifunctional installation testers streamline your installation and test preparations using the intuitive user interface and a high-resolution colour touch screen. You can enter site information and set test routes directly from the tester or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery Fluke TruTest software kts: multifunctional installation tester with TruTest software in case kpn: 1672 SCH FTT kpn_dash: kpn_clear: 1672SCHFTT bkpn: FLUKE 1672 SCH FTT bkpn_clear: FLUKE 1672SCHFTT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5581068 sr_ns: FLUKE5581068
r: 37990014 p: 2013 pid: 72991 b: FLUKE q: 0 st: lt: 15 ean: 0095969050692 sr: FLUKE 620101 sr_no_br: 620101 sr_no_br_cl: 620101 sr_cl: FLUKE620101 sr_dash: sold: 2013 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 715 Volt/mA calibrator - 620101 cn: LOOP CALIBRATOR cn2: LOOP CALIBRATOR cn_clear: LOOPCALIBRATOR d: Product description: The Fluke 715 V/mA calibrator delivers excellent performance and is extremely durable and reliable. This calibrator comes in the package with the rugged Fluke 80-series DMM. It is compact, lightweight, and easy to carry. The 715 is easy to use thanks to its push-button interface, which is similar to that of the Fluke 740-series multifunction documenting process calibrators. It is resistant to EMI, dust and splash water, and features a removable battery cover that allows quick battery replacement. Key features Measure loop current signals (0-20 mA, 4-20 mA) with a very high accuracy of 0.015% and a resolution of 1 mA Measure the output voltage signals of a process, coming from PLCs or transmitters Generate or simulate a loop current of 24 mA Supply voltage up to 100 mV or 10 V 24-V loop power supply with simultaneous current measurement Extra accuracy when measuring and generating voltage and current Longer battery life 250-ohm HART resistor with loop power supply Holster includes a storage compartment for test leads Compatible with the magnet pendant system for tool sets Gradual and linear rising output function Adjustable zero position and adjustable range ds: dsc: Scope of delivery Fluke 715 Volt/mA calibrator including: Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: Volt/mA calibrator kpn: 715 kpn_dash: kpn_clear: 715 bkpn: FLUKE 715 bkpn_clear: FLUKE 715 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Loop calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke loop calibrator sr_no_br_cl_ns: 620101 sr_ns: FLUKE620101
r: 02951135 p: 2013 pid: 71968 b: FLUKE q: 1 st: 1 lt: 1 ean: 0095969599733 sr: FLUKE 4017165 sr_no_br: 4017165 sr_no_br_cl: 4017165 sr_cl: FLUKE4017165 sr_dash: sold: 2013 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 28 II EX True RMS digital multimeter - 4017165 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description 4-1/2-digit mode for accurate measurements (20,000 counts) True RMS AC voltage and current for accurate measurements on non-linear signals Measures up to 1000 V and 10 A AC and DC (remember that hazardous areas require measurements with lower values) A low-pass filter ensures accurate voltage and frequency measurements on frequency-controlled drives Frequency up to 200 kHz and % duty cycle, for diagnosing frequency-controlled drives and switching power supplies Resistance measurement and loop-through and diode test Capacitance range of 10,000 µF for components and motor capacitors Conductance measurements for high resistance or leakage tests Minimum, maximum and average values and peak recording for automatic recording of transients and oscillations Relative mode for eliminating test lead interference during resistance measurements Automatic and manual range setting for maximum flexibility Input Alert function protects you by means of a beeping signal and the flashing 'Lead' message when cords are connected to the wrong inputs The illuminated keys are especially easy to spot in poorly lit environments, even when wearing all the required personal protective equipment Large display figures and a bright white backlight with two illumination levels also ensure good visibility Long battery life - 400 hours normally, without backlight (alkaline) Key features A fully sealed, IP67-approved housing Resistant to a drop of up to 3 metres (with holster) Dustproof according to IEC 60529 IP6x Waterproof according to IEC 60529 IPx7 CAT III 1000 V, CAT IV 600 V Reversible holster for extra protection of the display when not in use ds: dsc: kts: True RMS digital multimeter kpn: 28 II EX kpn_dash: kpn_clear: 28IIEX bkpn: FLUKE 28 II EX bkpn_clear: FLUKE 28IIEX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4017165 sr_ns: FLUKE4017165
r: 02909234 p: 668 pid: 72527 b: FLUKE q: 0 st: lt: 15 ean: 0095969400367 sr: FLUKE 2837799 sr_no_br: 2837799 sr_no_br_cl: 2837799 sr_cl: FLUKE2837799 sr_dash: sold: 2004 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -40 °C Max. temperature 650 °C Optical ratio 30:1 Power supply 2 x AA Accuracy ± 1 °C n: FLUKE 566 infrared thermometer (from -40°C to +650°C) - 2837799 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description: The 566 infrared and contact thermometer features a simple, three-button on-screen menu interface (in 6 languages) to make measuring temperature easier than ever. You can quickly navigate through advanced functions to adjust emissivity, start recording data or turn alarms on and off with just a few button presses. With its rugged, user-friendly and ergonomic design, the Fluke 566 can withstand harsh industrial, electrical and mechanical environments. These tools go beyond other IR thermometers (or pyrometers), allowing you to work more efficiently in more applications. Key features Two-in-one IR and contact thermometer with a 30:1 distance-to-plate ratio. Measures temperatures from -40°C to 650°C (40°F to 1202°F). Makes it easy to access advanced functions with softkey buttons and graphic display. Features a rugged, ergonomic design that withstands harsh industrial, electrical and mechanical environments. Works with most K-type thermocouples Other features Adjustable radiant power allowing you to measure a wide variety of surfaces with confidence. Up to 20 data points for later downloading and recall Two levels of display backlighting Type-K thermocouple probe included Features audible and visual alarms to immediately alert you to measurements outside set limits. Provides MAX, MIN, DIF and AVG functions to quickly identify problems. ds: dsc: Scope of delivery Fluke 566 Infrared and contact thermometer Thermocouple probe K Durable hard case 2 AA batteries Quick start guide in 6 languages User guide on CD in 6 languages (English, Spanish, French, German, Portuguese and Simplified Chinese) 2-year warranty kts: infrared thermometer (from -40°C to +650°C) kpn: 566 kpn_dash: kpn_clear: 566 bkpn: FLUKE 566 bkpn_clear: FLUKE 566 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 2837799 sr_ns: FLUKE2837799
r: 02951281 p: 395.611 pid: 71990 b: FLUKE q: 0 st: lt: 6 ean: 0095969659475 sr: FLUKE 4297126 sr_no_br: 4297126 sr_no_br_cl: 4297126 sr_cl: FLUKE4297126 sr_dash: sold: 1978.055 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T5-600/62MAX+/1ACE kit with infrared thermometer, electrical tester and voltage detector - 4297126 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description: This kit is designed to help electricians and HVAC technicians solve problems faster. First test for overheated electrical appliances using an IR thermometer and then use electrical test instruments to find out more about the problem. Features T5-600 voltage, continuity and current testers Automatically measures AC and DC voltage with accurate digital resolution. Displays resistance up to 1000 ? Simple and accurate OpenJaw current measurement. Continuity beep. Rugged enough to withstand a drop of 3 m (10 ft ). 600 V model. Automatic shutdown to save battery life. AC current. Display hold. All inputs of the T5-600 are protected according to EN61010-1 CAT III 600V. UL, CSA and VDE listed. Features Fluke 62 MAX+ Small in size. Big on ruggedness. Dust and water resistant: IP54 class. Rugged: 3 m (9.8 ft) drop tested. Ergonomically designed: Completely redesigned for a more natural hand fit. Distance to spot: 12:1. Dual lasers: Identifies the area to be measured. Large backlit display: Makes data easier to read, even in dark environments. C115 deluxe soft carrying case with shoulder strap. ds: dsc: Scope of delivery T5-600 electrical tester up to 600V 62 MAX+ IR thermometer kts: kit with infrared thermometer, electrical tester and voltage detector kpn: T5-600/62MAX+/1ACE kpn_dash: T5 kpn_clear: T560062MAX1ACE bkpn: FLUKE T5-600/62MAX+/1ACE bkpn_clear: FLUKE T560062MAX1ACE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4297126 sr_ns: FLUKE4297126
r: 02951140 p: 974.775 pid: 73266 b: FLUKE q: 0 st: lt: 8 ean: 0095969262965 sr: FLUKE 2157280 sr_no_br: 2157280 sr_no_br_cl: 2157280 sr_cl: FLUKE2157280 sr_dash: sold: 1949.55 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1577 insulation multimeter - 2157280 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description: Two powerful instruments in one The Fluke 1587 and 1577 insulation multimeters combine a digital insulation tester with a full-fledged digital True RMS multimeter in one compact and portable instrument, for optimum versatility in both troubleshooting and preventive maintenance. Whether you are working on motors, generators, cables or switchgear, the Fluke 1587/1577 insulation multimeters are ideal to help you do just that, and at a much lower cost than if you had to buy two products. Key features: Insulation test voltages: 500 V and 1000 V Insulation test: 0.1 MOhm to 600 MOhm Automatic discharge of capacitive voltages AC/DC voltage DC in millivolts AC/DC in milliamps Resistance (0.1 Ohm to 50 MOhm) Pass-through Three-year warranty Remote use probe, test leads, alligator clips Robust carrying case Automatic switch-off for longer battery life True-RMS Large backlit display Detection of live circuits prevents, for additional user safety, insulation tests at voltages > 30 V Measurement category CAT III 1000 V, CAT IV 600 V Suitable for optional Fluke TPAKTM magnetic pendant system, leaving your hands free for other work ds: dsc: kts: insulation multimeter kpn: 1577 kpn_dash: kpn_clear: 1577 bkpn: FLUKE 1577 bkpn_clear: FLUKE 1577 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 2157280 sr_ns: FLUKE2157280
r: 02959874 p: 919.178 pid: 71465 b: FLUKE q: 0 st: lt: 11 ean: 0195112031414 sr: FLUKE 5302512 sr_no_br: 5302512 sr_no_br_cl: 5302512 sr_cl: FLUKE5302512 sr_dash: sold: 1838.356 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE PTi120 pocket thermal imaging camera 120x90 9Hz - 5302512 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description The power of a professional thermal imaging camera that fits in your pocket. Touchscreen IR Fusion that automatically captures a digital image of visible light and an infrared image simultaneously, making it easy to pinpoint problems. 8.9 cm (3.5 in) touchscreen LCD display for easy troubleshooting. Fully radiometric thermal imaging camera providing pixel-accurate measurement data with 120 x 90 (10,800 pixels) infrared resolution. Housing with IP54 protection class, making the camera resistant to dirt, water and a fall of up to 1 metre. ds: dsc: Scope of delivery Thermal imaging camera Carrying case Carrying strap USB cable kts: pocket thermal imaging camera 120x90 9Hz kpn: PTi120 kpn_dash: kpn_clear: PTi120 bkpn: FLUKE PTi120 bkpn_clear: FLUKE PTi120 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5302512 sr_ns: FLUKE5302512
r: 03346460 p: 916 pid: 158589 b: FLUKE q: 0 st: lt: 8 ean: 0195112122679 sr: FLUKE 5593208 sr_no_br: 5593208 sr_no_br_cl: 5593208 sr_cl: FLUKE5593208 sr_dash: sold: 1832 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message No Automatic shut-off Yes With current clamp Yes Max. current AC/DC 60 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Max. electrical capacity 10000 µF Measurement of electrical capacity Yes Max. frequency 100 kHz Max. resistance 50 MOhm Measurement voltage Yes Current measurement Yes Measurement resistance Yes Measurement frequency Yes n: FLUKE 283 FC/PV digital multimeter with wireless solar current clamp in carrying case - 5593208 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC digital multimeter and the a283 FC True-RMS wireless current clamp are the perfect troubleshooting combination for technicians in DC environments up to 1500 V. Whether you are performing first-line troubleshooting at a utility-scale solar photovoltaic (PV) array, a wind power installation, an electric railway line or a data centre, the Fluke 283 FC is designed to improve safety and increase productivity while giving you accurate, reliable and reproducible results. The 283 FC/PV comes with accessories that meet the CAT III 1500 V DC safety specification, so you can work with confidence without compromising safety. With Staubli MC4 test leads, you can quickly make reliable, safe connections to modules or ranges to test DC voltages up to 1500 V DC. TL175-HV CAT III 1500 V/CAT IV 1000 V silicon test leads give you more flexibility when testing voltage, milli voltage, resistance, continuity or capacitance on inverters, combiner cabinets, PV arrays or individual PV modules. The bright backlit display and backlit keys make it easier to work in different lighting conditions. The included magnetic hanging kit frees your hands during troubleshooting. With the included customised carrying case, your investment is protected while you transport it. Key features Highly accurate voltage measurements for accurate front-line fault finding Current measurements up to 60 A AC/DC for safe and more accurate fault-finding in individual sets of modules (when using the a283 FC wireless current clamp) Visual and audio polarity indicators help prevent module wiring problems User-defined limit meter helps you make quick go/no-go decisions when looking for faults Unique multimeter readiness self-test ensures your meter is ready for testing Store and log readings in internal memory and view them on your mobile device via Fluke Connect ds: dsc: Scope of delivery 283 FC TRMS wireless digital multimeter a283 FC 60A TRMS wireless AC/DC current clamp Solar MC4 test lead kit TL175-HV TwistGuard silicone test leads Premium protective bag Magnetic hanging strap kts: digital multimeter with wireless solar current clamp in carrying case kpn: 283 FC/PV kpn_dash: kpn_clear: 283FCPV bkpn: FLUKE 283 FC/PV bkpn_clear: FLUKE 283FCPV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5593208 sr_ns: FLUKE5593208
r: 02951070 p: 440.261 pid: 71959 b: FLUKE q: 0 st: lt: 21 ean: 0095969692052 sr: FLUKE 4401595 sr_no_br: 4401595 sr_no_br_cl: 4401595 sr_cl: FLUKE4401595 sr_dash: sold: 1761.044 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 0,4 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 3000 FC wireless multimeter - 4401595 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Now compatible with Fluke Connect Mobile App Fluke's 3000 FC series wireless multimeter ensures that instruments and not your body are near live electrical dividers. Increase safety and efficiency with this tester. All the facts, right on site. The Fluke 3000 FC True-RMS wireless multimeter with the Fluke Connect app and ShareLive video call function. Accuracy, reliability and ease of use make the Fluke 3000 FC wireless multimeter the ideal solution for professional technicians. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 3000 FC has all the features you need to investigate and troubleshoot many problems in electrical and electronic systems. The Fluke 3000 FC offers you True-RMS voltage and current measurement functions, 6000-count resolution and manual and automatic range setting. It can also perform frequency, capacitance and resistance measurements as well as dial-through and diode tests. In addition, the Fluke 3000 FC offers a higher base accuracy of 0.09%, a digital display showing up to three secondary remote module readings and a bright white backlight. Work safely near electrical dividers while wearing less personal protective equipment The Fluke 3000 FC True-RMS wireless multimeter and the Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then, at a safe distance, read the results on the 3000 FC wireless multimeter. You can display the meter's readings plus the readings of up to 3 wireless modules, while reducing the risk of arc discharge by staying away from hazardous measurement situations. Even better: the Fluke 3000 FC Series wireless multimeter can send readings to your smartphone, allowing you to store readings on it and share them with your team on site, anytime, anywhere. Don't get caught up chasing interrelated events Timing is all-important when you are trying to find the cause of a complex problem. You often need to measure in one place while looking at activity in another part of the system. We've solved that problem with Fluke Connect - connect your remote modules to a particular location and then measure with the Fluke 3000 FC multimeter up to 20 metres away from that location. You can see the interaction between your remote measurement points on a single screen, in real-time. You can even download the data to a PC for further analysis. Other capabilities of Fluke Connect and the 3000 FC multimeter. Add your laptop and go from logging straight to analysis and diagnosis. Log data over an extended period of time with the Fluke Connect wireless modules and monitor an hour, a shift or a week's worth of circuit load changes. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. Save time, effort and energy with the Fluke 3000FC True-RMS digital multimeter with a set of industrial test leads and a non-contact voltage locator, all in a compact, durable carrying case. Key features: The Fluke 3000 FC has features and functions you need to examine your equipment and installation for faults. True-RMS AC voltage and current for accurate measurements on non-linear loads Large-digit display with analogue bargraph Backlit display for working in dark places Capacity Records minimum and maximum values to support troubleshooting Keep your hands free with the magnetic hanging clip included in this combination kit 3-year warranty Plus, Fluke Connect wireless-compatible modules measure AC, DC and AC+DC voltage, AC and DC current and temperature, all of which are displayed on Fluke's 3000 FC series wireless multimeter. Choose a standard current clamp or a flexible current clamp to measure AC current. Mix and match modules to meet your unique measurement needs. Read the primary measurement value on the main display, and data from up to three modules at the same time. Modules are available individually, or as part of Fluke Connect kits ds: dsc: kts: wireless multimeter kpn: 3000 FC kpn_dash: kpn_clear: 3000FC bkpn: FLUKE 3000 FC bkpn_clear: FLUKE 3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4401595 sr_ns: FLUKE4401595
r: 03346457 p: 581.935 pid: 158590 b: FLUKE q: 0 st: lt: 8 ean: 0195112122648 sr: FLUKE 5593173 sr_no_br: 5593173 sr_no_br_cl: 5593173 sr_cl: FLUKE5593173 sr_dash: sold: 1745.805 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message No Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 283 FC digital multimeter CAT III 1500 V in carrying case - 5593173 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The CAT III 1500 V/CAT IV 1000 V True-RMS Fluke 283 FC digital multimeter is ideal for technicians working in DC environments up to 1500 V. Whether you are working with utility-scale solar photovoltaic (PV) arrays, wind power, electric railway lines or data centres, the Fluke 283 FC improves safety and increases productivity while providing accurate, reliable and reproducible results. The 283 FC comes with silicone TwistGuard test leads with safety specification TL175-HV CAT III 1500 V/CAT IV 1000 V for working in higher voltage environments without compromising safety, giving you more flexibility when testing voltage, milli voltage, resistance, continuity or capacitance. The backlit LCD display and backlit keypad make it easier to work in different lighting conditions, while the magnetic suspension kit leaves your hands free during testing. The 283 FC also comes with a custom-made carrying case that protects your investment during transport. Key features Highly accurate voltage measurements for accurate front-line fault finding Current measurements up to 60 A AC/DC for safe and more accurate fault finding in individual sets of modules (when using the optional a283 FC wireless current clamp) Visual and audio polarity indicators with on/off function help prevent wiring problems User-defined limit meter helps you make quick go/no-go decisions when looking for faults Unique multimeter readiness self-test ensures your meter is ready for testing Store and log readings in internal memory and view them on your mobile device via Fluke Connect ds: dsc: Scope of delivery 283 FC TRMS wireless digital multimeter TL175-HV TwistGuard silicone measuring leads Premium protective bag Magnetic suspension strap kts: digital multimeter CAT III 1500 V in carrying case kpn: 283 FC kpn_dash: kpn_clear: 283FC bkpn: FLUKE 283 FC bkpn_clear: FLUKE 283FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5593173 sr_ns: FLUKE5593173
r: 02909133 p: 282.153 pid: 71879 b: FLUKE q: 0 st: lt: 10 ean: 0095969692021 sr: FLUKE 4401563 sr_no_br: 4401563 sr_no_br_cl: 4401563 sr_cl: FLUKE4401563 sr_dash: sold: 1692.918 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T3000FC Type K wireless temperature module - 4401563 cn: THERMOMETER cn2: THERMOMETER cn_clear: THERMOMETER d: Key features: The Fluke t3000 FC wireless temperature module type K wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke t3000 FC wireless temperature module type K enables the following: Use as a standalone gauge or as part of the system Log function to record and store up to 65,000 measured values Product description: All the facts, right on site. The Fluke t3000 FC wireless temperature module type K is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measurement tools ensure that instruments and not your body are near live electrical dividers. It's simple. Connect the t3000 FC wireless temperature module, or any of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. Even better: the Fluke Connect instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Don't get stuck while detecting intermittent electrical faults Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We have solved that problem with Fluke Connect ? leave your remote modules connected to log readings and leave the site to address other problems. You can then download the data for further analysis. Work safely near electrical distributors while wearing less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more t3000 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Cheaper and faster 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect voltage module to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Add your laptop and go from logging straight to analysis and diagnosis. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. The t3000 FC temperature modules enable the following: Detect temperature differences between three phases in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit loads. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past a working module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery FC wireless temperature module type K Fluke t3000 thermometer with thermocouple 80PK-1 thermocouple, type K, bulb Magnetic suspension strap kts: Type K wireless temperature module kpn: T3000FC kpn_dash: kpn_clear: T3000FC bkpn: FLUKE T3000FC bkpn_clear: FLUKE T3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Thermometer | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke thermometer sr_no_br_cl_ns: 4401563 sr_ns: FLUKE4401563
r: 02951022 p: 814.828 pid: 71955 b: FLUKE q: 0 st: lt: 8 ean: 0095969586702 sr: FLUKE 3947820 sr_no_br: 3947820 sr_no_br_cl: 3947820 sr_cl: FLUKE3947820 sr_dash: sold: 1629.656 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 28-II industrial multimeter (IP67) - 3947820 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The new standard for ruggedness The Fluke 27 II and 28 II digital multimeters set a new standard for working in harsh environments, while having the features and accuracy to solve most electrical problems. Both meters are rated to IP 67 (ensuring water and dust tightness), have been submitted to MSHA for approval, have an extended operating temperature range of -15 °C to + 55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) at a relative humidity of 95% and are designed and tested to withstand a 3 m drop. Fluke 20-series multimeters are designed for use in the most demanding environments. Key features Measures up to 1000 V AC and DC Measures up to 10 A (20 A for 30 seconds) Capacitance range 10,000 ?F Frequency up to 200 kHz Enlarged AC voltage bandwidth ? 15 Hz to 20 kHz (28 II), 40 Hz to 30 kHz (27 II) Built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (28 II) Resistance measurement, dial-through and diode test Min/Max and Average recording for automatic recording of variations Peak min-max (28 II) Unique function for accurate voltage and frequency measurements on variable-speed drives and other devices causing electrical disturbances (28 II) Other features IP 67 protection, i.e. water and dust tight, fully sealed for use in harsh environments Designed to withstand a 3-metre drop (with holster) High-resolution display mode of 20,000 counts (28 II) True-RMS AC voltage and current for accurate measurements on non-linear signals (28 II) Average response voltage and current for measurements (27 II) Illuminated keys ensure easy readability even in poorly lit environments Large display figures and bright white backlight with two illumination levels for better legibility Reversible holster for extra protection when not in use The meter withstands dangerous voltage peaks of 8,000 V caused by switching loads and by disturbances in industrial circuits. It complies with the second edition of IEC and ANSI safety standards for electrical equipment. Long battery life (800 hours) Relative mode for eliminating test lead resistance when measuring low resistance values Automatic and manual range adjustment for maximum flexibility Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. MSHA approval ds: dsc: Scope of delivery Industrial multimeter 28-II TL75 test leads AC175 alligator clips 80BK-A type-K thermocouple probe kts: industrial multimeter (IP67) kpn: 28-II kpn_dash: 28 kpn_clear: 28II bkpn: FLUKE 28-II bkpn_clear: FLUKE 28II c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947820 sr_ns: FLUKE3947820
r: 03347138 p: 525.4 pid: 158825 b: FLUKE q: 0 st: lt: 211 ean: 0195112129005 sr: FLUKE 6016119 sr_no_br: 6016119 sr_no_br_cl: 6016119 sr_cl: FLUKE6016119 sr_dash: sold: 1576.2 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -10 °C Max. temperature 550 °C Number of batteries included 0 n: FLUKE TC01A iSee mobile thermal imaging camera for Android, 9 Hz - 6016119 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description Suitable for various applications due to its wide temperature range up to 550 °C (1022 °F) For inspecting electrical cabinets, identifying HVAC problems and installing underfloor heating Offers professional image quality, comparable to high-end thermal imaging cameras, with a thermal resolution of 256 x 192 pixels The software offers comprehensive spot, line and surface temperature analysis for accurate diagnosis Key features Heat sensitivity of 50 mK (0.05 °C) for small differences with an accuracy of approx. 2% or approx. 2 °C for reliable results Customise image display with more than 10 standard or customised colour palettes Compact design weighing only 22 g Note: the TC01A is only suitable for Android, not for iPhone ds: dsc: Scope of delivery TC01A mobile thermal imaging camera for Android, 9 Hz Packaging box User manual kts: iSee mobile thermal imaging camera for Android, 9 Hz kpn: TC01A kpn_dash: kpn_clear: TC01A bkpn: FLUKE TC01A bkpn_clear: FLUKE TC01A c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 6016119 sr_ns: FLUKE6016119
r: 01041837 p: 1361.386 pid: 95592 b: FLUKE q: 0 st: lt: 11 ean: 0095969355322 sr: FLUKE 2679831 sr_no_br: 2679831 sr_no_br_cl: 2679831 sr_cl: FLUKE2679831 sr_dash: sold: 1361.386 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 922/KIT airflowmeter/micromanometer kit - 2679831 cn: AIRFLOW METER cn2: AIRFLOW METER cn_clear: AIRFLOWMETER d: Product description: Modern HVAC technicians want a simple solution for investigating ventilation system problems. Differential pressure measurements are only part of the story. Technicians also want to measure air velocity and air flow, without having to use expensive, cumbersome, specialist instruments. The Fluke 922 makes it easy for you to make airflow measurements by combining three instruments: you can now measure differential pressure, airflow and air velocity with one rugged meter. Key features The Fluke 922 is designed and built for how (and where) you do your job, with performance, ruggedness and ease of use that sets it apart from the competition. The bright white display, rugged holster and wrist strap allow you to use the Fluke 922 even in less than ideal conditions. The colour-coded hoses help you determine the origin of your measurements. The simple, intuitive interface allows you to measure pressure, air velocity or airflow with just the push of a button. The Fluke 922 helps you easily analyse airflow. Use the Fluke 922 to measure pressure loss in HVAC equipment at the touch of a button to increase peak performance and extend equipment life match ventilation to the number of people present monitor the pressure ratio between indoor and outdoor air and manage the building envelope promoting indoor comfort and air quality taking measurements in air ducts for accurate airflow measurements ds: dsc: Scope of delivery 922 airflow meter 12 in. pitot tube Toolpak Two rubber hoses Four 1.5 V AA alkaline batteries User manual Carrying case kts: airflowmeter/micromanometer kit kpn: 922/KIT kpn_dash: kpn_clear: 922KIT bkpn: FLUKE 922/KIT bkpn_clear: FLUKE 922KIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Airflow meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke airflow meter sr_no_br_cl_ns: 2679831 sr_ns: FLUKE2679831
r: 02125466 p: 642 pid: 72409 b: FLUKE q: 2 st: 1 lt: 1 ean: 0095969586719 sr: FLUKE 3947835 sr_no_br: 3947835 sr_no_br_cl: 3947835 sr_cl: FLUKE3947835 sr_dash: sold: 1284 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 77 IV digital multimeter 1000V - 3947835 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 77-IV digital multimeter has the features you need to solve most electrical and electronic problems. Easy to use, this meter is significantly improved over Fluke's original 70 series. For example, this meter has more measurement functions, meets the latest safety standards, and has a much larger display that is easier to read. Measuring functions Measuring range up to 1000 V Average value method AC measurements 0.3% accuracy 10 amps continuously (20 A for 30 seconds) Frequency and capacitance measurement Resistance and continuity test Key features Large display Backlight for poorly lit areas Min/Max recording of signal fluctuations Ergonomic overmolded housing with integrated probe holders Keep your hands free with the optionally available magnetic TPAK suspension kit Automatic and manual range adjustment Meets the safety standards of measurement category CAT III 1000 V and CAT IV 600 V The 77-IV replaces the 77. Step up to superior functionality and safety today. ds: dsc: Scope of delivery 9V battery (installed) Test leads User manual kts: digital multimeter 1000V kpn: 77 IV kpn_dash: kpn_clear: 77IV bkpn: FLUKE 77 IV bkpn_clear: FLUKE 77IV c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947835 sr_ns: FLUKE3947835
r: 03252442 p: 1245.519 pid: 73811 b: FLUKE q: 0 st: lt: 10 ean: 0195112041222 sr: FLUKE 5337401 sr_no_br: 5337401 sr_no_br_cl: 5337401 sr_cl: FLUKE5337401 sr_dash: sold: 1245.519 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1500 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 393-IRR-PVLEAD current clamp 1500 V + radiation meter in carrying case - 5337401 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 393 CAT III 1500 V True-RMS solar current clamp with iFlex is designed for solar photovoltaic (PV) technicians and maintenance professionals working in high DC voltage environments: PV arrays, wind power, electric railways, battery banks for emergency power supplies in data centres. The current clamp measures up to 1500 V DC and 1000 V AC with test leads and up to 999.9 A DC or AC via the jaw. The included iFlex flexible current clamp offers extended AC current measurements up to 2500 A. The 393 has a thin jaw, allowing you to access cables in crowded combiner cabinets. Moreover, the measuring leads are designed with your work in mind and also comply with safety specification CAT III 1500 V DC. Key features Measure safely with a current clamp that meets safety specification CAT III 1500 V Thin jaws for access to cables in crowded combiner boxes Rugged and IP54 rated for outdoor use Work efficiently with DC power measurement, audio polarity and visual continuity IP54 protection class, ideal for outdoor work on solar panels and wind systems DC power measurement, with readings in kVA Audio polarity indicator helps prevent unintentional faulty wiring Visual continuity tests provide a bright green light on the display, ideal when working in dark and noisy environments When measuring AC current, the included flexible current clamp iFlex gives you unparalleled access to cables in tight spaces. The iFlex probe can be rotated through extremely tight spaces and delivers accurate current measurements. ds: dsc: Scope of delivery 393 FC CAT III 1500 V TRMS current clamp Test leads, safety specification CAT III 1500 V, right-angle plugs, with safety caps iFlex 18-inch flexible current clamp TPAK magnetic suspension strap High-quality protective bag Pomona PVLEAD1 MC4 to 4 mm test lead set Pomona PVLEAD3 MC4 measuring lead set for solar current clamp IRR1-SOL radiation meter for solar energy 80PR-IRR external temperature measuring probe C250 carrying case with shoulder strap kts: current clamp 1500 V + radiation meter in carrying case kpn: 393-IRR-PVLEAD kpn_dash: 393 kpn_clear: 393IRRPVLEAD bkpn: FLUKE 393-IRR-PVLEAD bkpn_clear: FLUKE 393IRRPVLEAD c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5337401 sr_ns: FLUKE5337401
r: 03330050 p: 1234 pid: 32443 b: FLUKE q: 0 st: lt: 10 ean: 0095969611084 sr: FLUKE 4097561 sr_no_br: 4097561 sr_no_br_cl: 4097561 sr_cl: FLUKE4097561 sr_dash: sold: 1234 p_range: none type: standard act: 1 avo: 1 av: Min. pressure -0,83 bar Max. pressure 20 bar Connection size 1/4" Connection type Outer thread Thread type BSPP Version Bottom connection n: FLUKE 700G07 precision pressure test gauge 500 PSIG - 4097561 cn: PRESSURE GAUGE cn2: PRESSURE GAUGE cn_clear: PRESSUREGAUGE d: Product description Precision pressure gauge calibrators designed for fast and accurate test results Make precise pressure measurements from 10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05 % measurement uncertainty in 1 year Easy to read in most environments with a bright backlit screen Take your gauge anywhere with a rugged protective holster Designed for pressure calibration in the field, Fluke 700G series pressure gauge calibrators offer you the performance and durability you have come to expect from Fluke pressure calibration products, while being simple and easy to use. Whether you want to connect to a hydraulic or pneumatic test pump, this series is intended as a complete calibration solution with 23 pressure gauges from 10 inH2O/20 mbar to 10,000 psi/690 bar. With a standard accuracy of 0.05% on the full scale and reference standard gauges with accuracies of 0.04%, you will definitely find a gauge that fits your application exactly. Measurement and data logging The Fluke 700G series of meters and pump sets are designed for pressure experts working with process pressure instruments. The pressure ranges of the 700G series gauges cover the ranges needed to meet process pressure calibration requirements, including atmospheric pressure +/- 10 inH20 (+/- 25 mbar) to 10,000 psi (0-690 bar), absolute pressure from 0 to 15 psi (0-1 bar) to 0-300 psi (0-20 bar) and reference thermometers from 0 to 30 psi (0-2 bar) to 10,000 psi (0-690 bar). Standard accuracy to 0.05 % of full scale Reference thermometers offer accuracy of 0.04 % of gauge reading Record more than 8,493 pressure readings in memory, which can be uploaded to a PC (with 700G/TRACK software) Robust design certified Intrinsically Safe Robust sealed IP-67 housing including protective holster Ensures you can work safely in explosive environments CSA: Class 1, div. 2, groups A-D ATEX: II 3 G Ex ic IIB T6 Gc 3-year warranty as standard User-friendly pressure solution Pressure gauge calibrators are the easiest pressure calibration tools to use. Switch them on, connect them to the pressure device you want to measure, and watch your reading - it's that simple. When combined with a Fluke-700PTPK pneumatic or 700HTPK hydraulic pump set, the 700G becomes a complete pressure source and measurement solution. The 700PTPK2 and 700HTPK2 premium pump sets offer easy connection to the gauge and the device under test, with connections that require no tools. Complete pressure calibration solution when meters are combined with dedicated pump sets Calibrate up to 600 psi (20 bar) with the pneumatic pump set 700PTPK or 700PTPK2. Calibrate up to 10,000 psi (690 bar) with the hydraulic pump set 700HTPK or 700HTPK2. ds: dsc: Scope of delivery Manual on CD-ROM in 14 languages Traceable calibration certificate Adapter 1/4" NPT to 1/4" ISO kts: precision pressure test gauge 500 PSIG kpn: 700G07 kpn_dash: kpn_clear: 700G07 bkpn: FLUKE 700G07 bkpn_clear: FLUKE 700G07 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure gauge | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure gauge sr_no_br_cl_ns: 4097561 sr_ns: FLUKE4097561
