r: 02951853 p: 2210.087 pid: 71174 b: FLUKE q: 0 st: lt: 8 ean: 0095969111072 sr: FLUKE 1630430 sr_no_br: 1630430 sr_no_br_cl: 1630430 sr_cl: FLUKE1630430 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 100G pressure calibrator -850 mbar to 7 bar (-12 to 100 psi) - 1630430 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrator delivers excellent performance and is extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. Easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. Protected against electromagnetic interference, dust and splash water and equipped with a removable battery cover, which allows quick battery replacement. This type of calibrator is available in 9 models and measures pressures up to 345 bar/5000 psi (for the measurement range of this particular item, see "Scope of delivery" above). They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features Measures pressure, 0.05% of full scale with internal pressure sensor to bar/psi value listed at "Scope of delivery" above Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: Scope of delivery Pressure calibrator -850 mbar to 7 bar (-85 to 689.48 kPa; -12 to 100 psi) Yellow protective holster with storage compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: pressure calibrator -850 mbar to 7 bar (-12 to 100 psi) kpn: 717 100G kpn_dash: kpn_clear: 717100G bkpn: FLUKE 717 100G bkpn_clear: FLUKE 717100G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 1630430 sr_ns: FLUKE1630430
r: 02951901 p: 2206.285 pid: 73397 b: FLUKE q: 0 st: lt: 8 ean: 0095969327701 sr: FLUKE 2547203 sr_no_br: 2547203 sr_no_br_cl: 2547203 sr_cl: FLUKE2547203 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 1500G pressure calibrator (103.4 bar) - 2547203 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (103.4 bar) kpn: 717 1500G kpn_dash: kpn_clear: 7171500G bkpn: FLUKE 717 1500G bkpn_clear: FLUKE 7171500G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547203 sr_ns: FLUKE2547203
r: 02951904 p: 2206.285 pid: 71182 b: FLUKE q: 0 st: lt: 8 ean: 0095969327732 sr: FLUKE 2547232 sr_no_br: 2547232 sr_no_br_cl: 2547232 sr_cl: FLUKE2547232 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 5000G pressure calibrator (345 bar) - 2547232 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (345 bar) kpn: 717 5000G kpn_dash: kpn_clear: 7175000G bkpn: FLUKE 717 5000G bkpn_clear: FLUKE 7175000G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547232 sr_ns: FLUKE2547232
r: 02951905 p: 2206.285 pid: 71375 b: FLUKE q: 0 st: lt: 8 ean: 0095969605632 sr: FLUKE 4058813 sr_no_br: 4058813 sr_no_br_cl: 4058813 sr_cl: FLUKE4058813 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 10000G pressure calibrator (690 bar) - 4058813 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrator delivers excellent performance and is extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. Easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. Protected against electromagnetic interference, dust and splash water and equipped with a removable battery cover, which allows quick battery replacement. This type of calibrator is available in 9 models and measures pressures up to 345 bar/5000 psi (for the measurement range of this particular item, see "Scope of delivery" above). They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features Measures pressure, 0.05% of full scale with internal pressure sensor to bar/psi value listed at "Scope of delivery" above Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: Scope of delivery Pressure calibrator 0 - 10,000 psi (0 to 690 bar, 0 to 69,000 kPa) Yellow protective holster with compartment for test leads Instruction sheet (14 languages) One 9-V alkaline battery Test leads and alligator clips kts: pressure calibrator (690 bar) kpn: 717 10000G kpn_dash: kpn_clear: 71710000G bkpn: FLUKE 717 10000G bkpn_clear: FLUKE 71710000G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4058813 sr_ns: FLUKE4058813
r: 02951869 p: 2152.236 pid: 71367 b: FLUKE q: 0 st: lt: 8 ean: 0095969327671 sr: FLUKE 2547175 sr_no_br: 2547175 sr_no_br_cl: 2547175 sr_cl: FLUKE2547175 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 717 300G pressure calibrator (20 bar) - 2547175 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 717 pressure calibrators deliver excellent performance and are extremely durable and reliable. These calibrators are compact, lightweight and easy to carry. The 717s are easy to use thanks to their push-button interface, which is similar to that of the Fluke 740 series multifunction documenting process calibrators. They are protected against electromagnetic interference, dust and splash water and they have a removable battery cover, which allows quick battery replacement. Available in 9 models, these calibrators measure pressures up to 345 bar/5000 psi. They are compatible with the Fluke 700Pxx differential pressure, gauge pressure and absolute pressure modules for even greater functionality. Key features: Measure pressure, 0.05% of full scale with internal pressure sensor up to 345 bar/5000 psi (model 5000G) Measures mA with 0.015% accuracy and 0.001 mA resolution, and generates 24-V loop power simultaneously Measures pressure up to 700 bar/10,000 psi using one of 29 Fluke 700Pxx pressure modules 1/8 NPT female pressure connection Suitable for non-corrosive gases and liquids Choice of eleven different engineering units Zero, Min, Max and Hold functions Calibrate P/I instruments with simultaneous pressure and flow measurement Pressure switch testing function records the set, reset and dead zone values of a pressure switch Error rate calculation of mA measurements for quick pass/fail decisions Long battery life Holster includes a storage compartment for measurement leads Suitable for the magnetic Toolpack suspension system New switch test ds: dsc: kts: pressure calibrator (20 bar) kpn: 717 300G kpn_dash: kpn_clear: 717300G bkpn: FLUKE 717 300G bkpn_clear: FLUKE 717300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 2547175 sr_ns: FLUKE2547175
r: 08107056 p: 2097.373 pid: 158860 b: FLUKE q: 0 st: lt: 8 ean: 0095969807845 sr: FLUKE 4722828 sr_no_br: 4722828 sr_no_br_cl: 4722828 sr_cl: FLUKE4722828 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 789FC-MA/KIT digital multimeter with mA loop calibrator + IR3000 FC connector + 4-20mA DC current clamp - 4722828 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description 789 Compact digital multimeter and mA loop calibrator solution Fully equipped mA loop calibrator with built-in 24 V loop power supply Troubleshoot any part of a control loop quickly and easily Large, clear display with dual measurements Product description IR3000 FC The Fluke Connect ir3000 FC connector lets you wirelessly transmit data from your existing Fluke instruments to your smartphone Fits over the infrared port of your existing Fluke instruments Instantly graph, store and share your instrument readings with your team from your smartphone Track and diagnose problems quickly and reliably Capture primary screen readings efficiently and securely on site Share results with your team instantly Upgradeable via USB Product description a3004 FC The Fluke a3004 FC wireless 4-20 mA DC current clamp is a fully functional current clamp that transmits readings wirelessly to other Fluke Connect-enabled main units, such as: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App TiX560 and TiX520 Key features of the Fluke a3004 FC wireless 4-20 mA DC current clamp are: Measures signals from 4 to 20 mA without "breaking the loop" Detachable current clamp with extension cable for measurements in narrow openings Use as a stand-alone meter or as part of the system A log function for recording and storing up to 65,000 measured values ds: dsc: Scope of delivery 789 compact digital multimeter and mA loop calibrator solution IR3000 FC connector a3004 wireless 4-20 mA DC current clamp kts: digital multimeter with mA loop calibrator + IR3000 FC connector + 4-20mA DC current clamp kpn: 789FC-MA/KIT kpn_dash: 789FC kpn_clear: 789FCMAKIT bkpn: FLUKE 789FC-MA/KIT bkpn_clear: FLUKE 789FCMAKIT c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 4722828 sr_ns: FLUKE4722828
r: 08107145 p: 2096.033 pid: 72169 b: FLUKE q: 0 st: lt: 8 ean: 0195112034996 sr: FLUKE 5315175 sr_no_br: 5315175 sr_no_br_cl: 5315175 sr_cl: FLUKE5315175 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTEST-ADV-M5 software licence code for TruTest Advanced (5 workstations) - 5315175 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 5 workstations The ability to assign an unlimited number of users to each of the 5 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Advanced (5 workstations) kpn: TRUTEST-ADV-M5 kpn_dash: TRUTEST kpn_clear: TRUTESTADVM5 bkpn: FLUKE TRUTEST-ADV-M5 bkpn_clear: FLUKE TRUTESTADVM5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315175 sr_ns: FLUKE5315175
r: 02952180 p: 2054.049 pid: 73474 b: FLUKE q: 0 st: lt: 8 ean: 0095969673679 sr: FLUKE 4352657 sr_no_br: 4352657 sr_no_br_cl: 4352657 sr_cl: FLUKE4352657 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R07 pressure module (0 - 35 bar) - 4352657 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 500 psi (0 to 35 bar), (0 to 3500 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 35 bar) kpn: 750R07 kpn_dash: kpn_clear: 750R07 bkpn: FLUKE 750R07 bkpn_clear: FLUKE 750R07 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352657 sr_ns: FLUKE4352657
r: 02952124 p: 2054.049 pid: 71427 b: FLUKE q: 0 st: lt: 8 ean: 0095969673525 sr: FLUKE 4352500 sr_no_br: 4352500 sr_no_br_cl: 4352500 sr_cl: FLUKE4352500 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA9 pressure module (0 - 100 bar) - 4352500 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 1500 psi (0 to 100 bar), (0 to 10 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 100 bar) kpn: 750PA9 kpn_dash: kpn_clear: 750PA9 bkpn: FLUKE 750PA9 bkpn_clear: FLUKE 750PA9 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352500 sr_ns: FLUKE4352500
r: 02952135 p: 2054.049 pid: 73456 b: FLUKE q: 0 st: lt: 8 ean: 0095969673570 sr: FLUKE 4352556 sr_no_br: 4352556 sr_no_br_cl: 4352556 sr_cl: FLUKE4352556 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD10 pressure module (-700 - 700 mbar) - 4352556 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -10 psi to 10 psi (-0.7 to 0.7 bar), (-70 to 70 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-700 - 700 mbar) kpn: 750PD10 kpn_dash: kpn_clear: 750PD10 bkpn: FLUKE 750PD10 bkpn_clear: FLUKE 750PD10 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352556 sr_ns: FLUKE4352556
r: 02952126 p: 2054.049 pid: 72106 b: FLUKE q: 0 st: lt: 8 ean: 0095969673532 sr: FLUKE 4352517 sr_no_br: 4352517 sr_no_br_cl: 4352517 sr_cl: FLUKE4352517 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PV3 pressure module (-350 mbar) - 4352517 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -5 psi (-350 mbar), (-35 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-350 mbar) kpn: 750PV3 kpn_dash: kpn_clear: 750PV3 bkpn: FLUKE 750PV3 bkpn_clear: FLUKE 750PV3 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352517 sr_ns: FLUKE4352517
r: 02952181 p: 2054.049 pid: 71438 b: FLUKE q: 0 st: lt: 8 ean: 0095969673686 sr: FLUKE 4352669 sr_no_br: 4352669 sr_no_br_cl: 4352669 sr_cl: FLUKE4352669 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R08 pressure module (0 - 70 bar) - 4352669 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 1000 psi (0 to 70 bar), (0 to 7000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adaptor from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 70 bar) kpn: 750R08 kpn_dash: kpn_clear: 750R08 bkpn: FLUKE 750R08 bkpn_clear: FLUKE 750R08 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352669 sr_ns: FLUKE4352669
r: 02952110 p: 2054.049 pid: 71231 b: FLUKE q: 0 st: lt: 8 ean: 0095969673457 sr: FLUKE 4352432 sr_no_br: 4352432 sr_no_br_cl: 4352432 sr_cl: FLUKE4352432 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA3 pressure module (0 - 350 mbar) - 4352432 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 5 psi (0 to 350 mbar), (0 to 35 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 350 mbar) kpn: 750PA3 kpn_dash: kpn_clear: 750PA3 bkpn: FLUKE 750PA3 bkpn_clear: FLUKE 750PA3 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352432 sr_ns: FLUKE4352432
r: 02952123 p: 2054.049 pid: 72741 b: FLUKE q: 0 st: lt: 8 ean: 0095969673518 sr: FLUKE 4352498 sr_no_br: 4352498 sr_no_br_cl: 4352498 sr_cl: FLUKE4352498 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA8 pressure module (0 - 70 bar) - 4352498 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 1000 psi (0 to 70 bar), (0 to 7000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adaptor from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 70 bar) kpn: 750PA8 kpn_dash: kpn_clear: 750PA8 bkpn: FLUKE 750PA8 bkpn_clear: FLUKE 750PA8 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352498 sr_ns: FLUKE4352498
r: 02952119 p: 2054.049 pid: 72737 b: FLUKE q: 0 st: lt: 8 ean: 0095969673495 sr: FLUKE 4352471 sr_no_br: 4352471 sr_no_br_cl: 4352471 sr_cl: FLUKE4352471 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA27 pressure module (0 - 20 bar) - 4352471 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 300 psi (0 to 20 bar), (0 to 2000 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 20 bar) kpn: 750PA27 kpn_dash: kpn_clear: 750PA27 bkpn: FLUKE 750PA27 bkpn_clear: FLUKE 750PA27 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352471 sr_ns: FLUKE4352471
r: 02952177 p: 2054.049 pid: 71434 b: FLUKE q: 0 st: lt: 8 ean: 0095969673655 sr: FLUKE 4352633 sr_no_br: 4352633 sr_no_br_cl: 4352633 sr_cl: FLUKE4352633 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750R06 pressure module (0 - 7 bar) - 4352633 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 100 psi (0 to 7 bar), (0 to 700 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 7 bar) kpn: 750R06 kpn_dash: kpn_clear: 750R06 bkpn: FLUKE 750R06 bkpn_clear: FLUKE 750R06 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352633 sr_ns: FLUKE4352633
r: 02952129 p: 2054.049 pid: 71431 b: FLUKE q: 0 st: lt: 8 ean: 0095969673556 sr: FLUKE 4352539 sr_no_br: 4352539 sr_no_br_cl: 4352539 sr_cl: FLUKE4352539 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD2 pressure modulee (-70 - 70 mbar) - 4352539 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -1 psi to 1 psi (-70 to 70 mbar), (-7 to 7 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure modulee (-70 - 70 mbar) kpn: 750PD2 kpn_dash: kpn_clear: 750PD2 bkpn: FLUKE 750PD2 bkpn_clear: FLUKE 750PD2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352539 sr_ns: FLUKE4352539
r: 02952111 p: 2054.049 pid: 73446 b: FLUKE q: 0 st: lt: 8 ean: 0095969673464 sr: FLUKE 4352444 sr_no_br: 4352444 sr_no_br_cl: 4352444 sr_cl: FLUKE4352444 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PA4 pressure module (0 - 1 bar) - 4352444 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 15 psi (0 to 1 bar), (0 to 100 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 1 bar) kpn: 750PA4 kpn_dash: kpn_clear: 750PA4 bkpn: FLUKE 750PA4 bkpn_clear: FLUKE 750PA4 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352444 sr_ns: FLUKE4352444
r: 02952151 p: 2054.049 pid: 73460 b: FLUKE q: 0 st: lt: 8 ean: 0095969673587 sr: FLUKE 4352563 sr_no_br: 4352563 sr_no_br_cl: 4352563 sr_cl: FLUKE4352563 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD4 pressure module (-1 - 1 bar) - 4352563 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 15 psi (-1 to 1 bar), (-100 to 100 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 1 bar) kpn: 750PD4 kpn_dash: kpn_clear: 750PD4 bkpn: FLUKE 750PD4 bkpn_clear: FLUKE 750PD4 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352563 sr_ns: FLUKE4352563
r: 02952154 p: 2054.049 pid: 72109 b: FLUKE q: 0 st: lt: 8 ean: 0095969673600 sr: FLUKE 4352588 sr_no_br: 4352588 sr_no_br_cl: 4352588 sr_cl: FLUKE4352588 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750PD50 pressure module (-1 - 3.5 bar) - 4352588 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 50 psi (-1 to 3.5 bar), (-100 to 350 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adaptor from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 3.5 bar) kpn: 750PD50 kpn_dash: kpn_clear: 750PD50 bkpn: FLUKE 750PD50 bkpn_clear: FLUKE 750PD50 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352588 sr_ns: FLUKE4352588
