r: 02952092 p: 1987.438 pid: 73436 b: FLUKE q: 0 st: lt: 8 ean: 0095969673341 sr: FLUKE 4352324 sr_no_br: 4352324 sr_no_br_cl: 4352324 sr_cl: FLUKE4352324 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P24 pressure module (0 - 1 bar) - 4352324 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 15 psi (0 to 1 bar), (0 to 100 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 1 bar) kpn: 750P24 kpn_dash: kpn_clear: 750P24 bkpn: FLUKE 750P24 bkpn_clear: FLUKE 750P24 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352324 sr_ns: FLUKE4352324
r: 02952095 p: 1987.438 pid: 71223 b: FLUKE q: 0 st: lt: 8 ean: 0095969673358 sr: FLUKE 4352336 sr_no_br: 4352336 sr_no_br_cl: 4352336 sr_cl: FLUKE4352336 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P05 pressure module (0 - 2 bar) - 4352336 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 30 psi (0 to 2 bar), (0 to 200 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 2 bar) kpn: 750P05 kpn_dash: kpn_clear: 750P05 bkpn: FLUKE 750P05 bkpn_clear: FLUKE 750P05 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352336 sr_ns: FLUKE4352336
r: 02951489 p: 1914.49 pid: 71328 b: FLUKE q: 0 st: lt: 10 ean: 0095969757904 sr: FLUKE 4531733 sr_no_br: 4531733 sr_no_br_cl: 4531733 sr_cl: FLUKE4531733 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE i430-FLEXI-TFII-4P flexible current clamp 61cm (4pcs) - 4531733 cn: CURRENT CLAMP cn2: CURRENT CLAMP cn_clear: CURRENTCLAMP d: Product description: Set of 4 pieces of i430 current clamps, for measuring high current ratings. The i430 Flex is an AC current clamp that works according to the Rogowski principle. Its flexible lightweight measuring head allows quick and easy installation in hard-to-reach places, no batteries or external power supply needed. The flexible pliers fit around rails and thick or hard-to-reach conductors. This set of 4 pieces is ideal for use with three-phase instruments such as the Fluke 430 series. ds: dsc: kts: flexible current clamp 61cm (4pcs) kpn: i430-FLEXI-TFII-4P kpn_dash: i430 kpn_clear: i430FLEXITFII4P bkpn: FLUKE i430-FLEXI-TFII-4P bkpn_clear: FLUKE i430FLEXITFII4P c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Current clamp | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke current clamp sr_no_br_cl_ns: 4531733 sr_ns: FLUKE4531733
r: 03343195 p: 1891.557 pid: 166144 b: FLUKE q: 0 st: lt: 10 ean: 0195112119426 sr: FLUKE 5580829 sr_no_br: 5580829 sr_no_br_cl: 5580829 sr_cl: FLUKE5580829 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1672 SCH multifunctional installation tester in case - 5580829 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest- software The Fluke 1672 multifunction installation tester will revolutionise the way you work. With its ergonomic design, seamless user interface, integrated data management capabilities and comprehensive reporting software, the 1672 sets the new standard as an integrated installation testing solution. The 1670-series installation testers allow you to check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. The Fluke 1670-series multifunctional installation testers streamline your installation and test preparations using the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging TP165X probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester in case kpn: 1672 SCH kpn_dash: kpn_clear: 1672SCH bkpn: FLUKE 1672 SCH bkpn_clear: FLUKE 1672SCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5580829 sr_ns: FLUKE5580829
r: 08107135 p: 1889.586 pid: 72954 b: FLUKE q: 0 st: lt: 8 ean: 0095969668644 sr: FLUKE 4335361 sr_no_br: 4335361 sr_no_br_cl: 4335361 sr_cl: FLUKE4335361 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE Ti-LENS/WIDE2 smart infrared wide-angle lens - 4335361 cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description When working in a tight space, you have a large field of view, allowing you to see a larger measurement object up close. See a complete arrangement of switchgear in tight situations, or see more components through an IR window. See the entire side of a building without having to walk too far away, or inspect roofs faster than with a standard lens by looking at a much larger area at once. Avoid the hassle of sending your camera to be calibrated along with the lens - with smart lenses, you can simply attach the lens to any suitable camera and capture images instantly. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Suitable for TiX560, TiX520, Ti400, Ti300 and Ti200. ds: dsc: kts: smart infrared wide-angle lens kpn: Ti-LENS/WIDE2 kpn_dash: Ti kpn_clear: TiLENSWIDE2 bkpn: FLUKE Ti-LENS/WIDE2 bkpn_clear: FLUKE TiLENSWIDE2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4335361 sr_ns: FLUKE4335361
r: 08107132 p: 1889.586 pid: 72942 b: FLUKE q: 0 st: lt: 8 ean: 0095969668637 sr: FLUKE 4335350 sr_no_br: 4335350 sr_no_br_cl: 4335350 sr_cl: FLUKE4335350 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE Ti-LENS/TELE2 smart infrared telephoto lens 2x - 4335350 cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description See your measurement object magnified 2 times more than with a standard lens and reduce the need to enter the danger zone in your facility or climb a high ladder to capture the critical infrared details that may indicate there is a problem with your equipment. Avoid the hassle of sending your camera to be calibrated along with the lens - with smart lenses, you can simply attach the lens to any suitable camera and capture images immediately. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Suitable for TiX580, TiX501, Ti480 PRO, Ti401 PRO. ds: dsc: kts: smart infrared telephoto lens 2x kpn: Ti-LENS/TELE2 kpn_dash: Ti kpn_clear: TiLENSTELE2 bkpn: FLUKE Ti-LENS/TELE2 bkpn_clear: FLUKE TiLENSTELE2 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4335350 sr_ns: FLUKE4335350
r: 03330065 p: 1879 pid: 72459 b: FLUKE q: 0 st: lt: 8 ean: 0095969617963 sr: FLUKE 4124358 sr_no_br: 4124358 sr_no_br_cl: 4124358 sr_cl: FLUKE4124358 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. working pressure 690 bar Connection size 1/4" n: FLUKE 700HTPK hydraulic test pressure kit - 4124358 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product description Hydraulic pressure testing kit with gauge for precision pressure testing, hydraulic hand pump, 1 hose set and adapters, including sturdy case User-friendly rugged and reliable construction capable of generating hydraulic pressure up to 10,000 psi/690 bar Combine it with one of the Fluke 700G precision pressure gauges for a complete pressure measurement and calibration solution Also combine with the Fluke 700G/TRACK software for uploading to a PC over 8,000 pressure measurements logged in the field ds: dsc: Scope of delivery 1 hose set and adapters Hard case kts: hydraulic test pressure kit kpn: 700HTPK kpn_dash: kpn_clear: 700HTPK bkpn: FLUKE 700HTPK bkpn_clear: FLUKE 700HTPK c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 4124358 sr_ns: FLUKE4124358
r: 08106958 p: 1754 pid: 72774 b: FLUKE q: 0 st: lt: 8 ean: 0095969397742 sr: FLUKE 2811808 sr_no_br: 2811808 sr_no_br_cl: 2811808 sr_cl: FLUKE2811808 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700PRV-1 pressure relief valve - 2811808 cn: ACCESSORIES/PART PRESSURE TEST PUMP cn2: ACCESSORIES/PART PRESSURE TEST PUMP cn_clear: ACCESSORIESPARTPRESSURETESTPUMP d: Product description Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar Repeatability up to 10% of nominal setting Installs directly into the 700HTP-1 pump The Fluke 700PRV-1 consists of a relief valve adjustable from 725 to 5800 PSI (50 to 200 bar) for use with the 700HTP-1 hydraulic test pump. The 1/8" NPT male thread fits directly into the Fluke 700HTP-1 pressure pump. For use with the 700HTP-1 hydraulic test pump. The 700PRV uses a multi-turn adjustment screw to set the preload on the internal disc springs. This pressure relief valve protects most commonly used Fluke pressure modules and pressure instruments from damage caused by unintentional overpressure. ds: dsc: kts: pressure relief valve kpn: 700PRV-1 kpn_dash: 700PRV kpn_clear: 700PRV1 bkpn: FLUKE 700PRV-1 bkpn_clear: FLUKE 700PRV1 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part pressure test pump sr_no_br_cl_ns: 2811808 sr_ns: FLUKE2811808
r: 03330040 p: 1737.094 pid: 73218 b: FLUKE q: 0 st: lt: 8 ean: 0095969610995 sr: FLUKE 4096855 sr_no_br: 4096855 sr_no_br_cl: 4096855 sr_cl: FLUKE4096855 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. working pressure 690 bar Connection size 1/4" n: FLUKE 700HTP2 hydraulic test pump - 4096855 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product description Variable stroke size adjustment, allowing the user to vary the volume and pressure per stroke Fine regulator for integral pressure, for fine pressure adjustment Direct connection to pressure modules allows two separate parts to form one instrument when performing pressure calibrations and measurements Two ¼ inch NPT pressure ports, one for reference (pressure module or pressure gauge), one for the device under test Compatible with optional Fluke-700PRV pressure reducing valve designed to protect pressure module from overpressure damage Better suction Better stroke limiting mechanism The Fluke 700HTP-2 is a hand-operated hydraulic pressure pump designed to generate calibration pressure up to 10,000 psi/690 bar. Designed for use with Fluke 700-series high-pressure modules, such as the Fluke 700P09, 700P29, 700P30 and 700P31. Ideal for calibration when connected to a Fluke high-pressure module via the reference port. The 700HTP-2 uses distilled water or mineral-based hydraulic oil as a means of calibrating devices with a high-pressure input, such as pressure transmitters or pressure gauges. Can also be used with Fluke 717 pressure calibrators. Note: the user must fit a hose with appropriate connections to carry pressure from the port of the device under test to the calibration device under test, such as the Fluke 700HTH-1 hose set. ds: dsc: Scope of supply ¼ inch NPT to ¼ inch NPT adapter to connect the reference gauge port on the pump housing to the 1/4 NPT female fitting on Fluke 700P29, P30 and P31 pressure modules. (2) ¼ inch NPT male to ¼ inch BSP female adapters ¼ inch NPT tee (installed) Instruction sheet kts: hydraulic test pump kpn: 700HTP2 kpn_dash: kpn_clear: 700HTP2 bkpn: FLUKE 700HTP2 bkpn_clear: FLUKE 700HTP2 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 4096855 sr_ns: FLUKE4096855
r: 02958473 p: 1732.461 pid: 71460 b: FLUKE q: 0 st: lt: 15 ean: 0095969686419 sr: FLUKE 4387869 sr_no_br: 4387869 sr_no_br_cl: 4387869 sr_cl: FLUKE4387869 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 714B/EN TC temperature calibrator - 4387869 cn: TEMPERATURE CALIBRATOR cn2: TEMPERATURE CALIBRATOR cn_clear: TEMPERATURECALIBRATOR d: Product description: For the temperature calibration professional who wants a highly accurate, easy-to-use, single-function thermocouple temperature calibrator, the Fluke 714B is the ideal test instrument. Key features The 714B can measure and simulate (17) different types of thermocouples plus millivolts Measure signals from 4 to 20 mA and generate a temperature signal at the same time Integrally designed suspension system included with each instrument Configurable 0% and 100% source settings for quick linearity checks in 25% increments Linear rise function and automatic rise function in 25% increments based on 0% and 100% settings Two inputs and backlit display for easy interpretation of measured values Switch-off settings are remembered at switch-on for quick restart of tests 1-year and 2-year specifications plus traceable calibration certificate ds: dsc: Scope of delivery Fluke 714B temperature calibrator Magnetic suspension system Batteries Manual Traceable calibration certificate Measurement leads kts: TC temperature calibrator kpn: 714B/EN kpn_dash: kpn_clear: 714BEN bkpn: FLUKE 714B/EN bkpn_clear: FLUKE 714BEN c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature calibrator sr_no_br_cl_ns: 4387869 sr_ns: FLUKE4387869
r: 03186814 p: 1634.325 pid: 72322 b: FLUKE q: 0 st: lt: 8 ean: 0095969784351 sr: FLUKE 4623306 sr_no_br: 4623306 sr_no_br_cl: 4623306 sr_cl: FLUKE4623306 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700PTPK2 pneumatic test pressure kit - 4623306 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product description Robust, high-quality pneumatic premium pressure pump set for fast and accurate test results, generates pressure up to 600 psi, 40 bar. Includes pneumatic hand pump 700PTP-1, premium test hoses and protective case. Combine with all Fluke Series 700G pressure gauges, 1000 psi (69 bar) or less, for a complete pressure test kit Generate pressure up to 600 psi, 40 bar with the test pump 700PTP-1 Connect 700G series pressure gauge directly to the included PTP-1 hand pump with premium adapter, no tools required Includes premium test hose set for transmitters 700TTH 5K and adapters, for connection to the pressure device under test Sturdy case protects pump and pressure gauge allowing the pressure gauge to remain connected to the pump ds: dsc: Scope of delivery 700PTP-1 pump Premium tool-free meter connection One premium transmitter test hose kit and adapters Case kts: pneumatic test pressure kit kpn: 700PTPK2 kpn_dash: kpn_clear: 700PTPK2 bkpn: FLUKE 700PTPK2 bkpn_clear: FLUKE 700PTPK2 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 4623306 sr_ns: FLUKE4623306
r: 08106967 p: 1615.61 pid: 73475 b: FLUKE q: 0 st: lt: 8 ean: 0095969786584 sr: FLUKE 4636786 sr_no_br: 4636786 sr_no_br_cl: 4636786 sr_cl: FLUKE4636786 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 805ES external vibration sensor for the 805 vibration meter - 4636786 cn: ACCESSORY/PART VIBRATION MEASUREMENTS cn2: ACCESSORY/PART VIBRATION MEASUREMENTS cn_clear: ACCESSORYPARTVIBRATIONMEASUREMENTS d: Product description Flat, angled sensor body allows it to fit into tight spaces The robust spiral cable reduces dangling to a minimum and can be extended over 2 metres if required The powerful U-shaped magnet attachment ensures a secure connection to flat or curved measuring surfaces Robust, sealed cable connector with strain relief reduces cable wear With removable sensor magnet to allow direct connection to a sensor mount or device threaded hole For direct connection to the SMB connector in the heel of the 805 vibration meter The Fluke 805ES is an external vibration sensor that is ideal in situations where it is difficult or impossible to use the vibration sensors of the 805 vibration meter itself. The 805ES allows you to take measurements in congested or hard-to-reach areas, behind machine guards or enclosures, or in poorly accessible areas where it is difficult to apply sufficient manual pressure to the 805 vibration meter. ds: dsc: kts: external vibration sensor for the 805 vibration meter kpn: 805ES kpn_dash: kpn_clear: 805ES bkpn: FLUKE 805ES bkpn_clear: FLUKE 805ES c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessory/part vibration measurements | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessory/part vibration measurements sr_no_br_cl_ns: 4636786 sr_ns: FLUKE4636786
r: 03317200 p: 1579.066 pid: 73985 b: FLUKE q: 0 st: lt: 8 ean: 0195112122426 sr: FLUKE 5592398 sr_no_br: 5592398 sr_no_br_cl: 5592398 sr_cl: FLUKE5592398 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1535 insulation resistance tester and megohmmeters - 5592398 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description User-selectable voltages from 250 V - 2500 V Measurement of insulation resistance up to 500 GOhm Short-circuit current up to 5 mA for fast, stable measurements Automatically calculate PI and DAR Perform 1300+ insulation tests on one set of batteries Fast, accurate and reliable insulation tests in a lightweight, portable package The Fluke 1535 and 1537 2500 V insulation resistance testers are designed to simplify first-line troubleshooting, whether you are on the factory floor or working on site at a solar installation. With these testers, where the user can select test voltages from 250 V to 2,500 V and with resistance measurements up to 500 GOhm, you can do more work with a single instrument. Featuring an intuitive user interface, a short-circuit current of up to 5 mA and a CAT IV specification of 600 V, these portable high-voltage insulation testers can make fast and stable resistance measurements wherever you take them. The 1537 Insulation Resistance Tester also allows you to save measurements for later review or transfer via PC using the supplied software. Selectable voltage tests: Customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar energy applications. Extended insulation resistance measurement: Achieve insulation resistance measurement up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. ds: dsc: Scope of delivery Fluke 1535 insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case kts: insulation resistance tester and megohmmeters kpn: 1535 kpn_dash: kpn_clear: 1535 bkpn: FLUKE 1535 bkpn_clear: FLUKE 1535 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 5592398 sr_ns: FLUKE5592398
r: 08107063 p: 1509.201 pid: 71796 b: FLUKE q: 0 st: lt: 8 ean: 0095969397704 sr: FLUKE 2811763 sr_no_br: 2811763 sr_no_br_cl: 2811763 sr_cl: FLUKE2811763 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700LTP-1 low-pressure test pump - 2811763 cn: PRESSURE TEST PUMP cn2: PRESSURE TEST PUMP cn_clear: PRESSURETESTPUMP d: Product description Pump can be easily cleaned without disassembling it Adjustable pressure reducing valve with slow venting option. Ensures slow pressure release at a regulated speed Quick connectors, one for the reference port for connection to a Fluke 700-series pressure module and one for connection to the unit under test Smart design, easy to carry and use The Fluke 700LTP-1 is a hand-operated pressure pump designed to generate vacuum down to -13 psi / -0.90 bar or pressure up to 100 psi / 6.9 bar. The Fluke 700LTP-1 has two pressure ports with quick connectors. Test hoses have 1/4-NPT female connections that can be converted using the BSP/ISO adapters. For use with 700-series pressure modules or 717 pressure calibrators. Ideal for low-pressure applications requiring accurate low-pressure testing. ds: dsc: Scope of delivery 2 adapters to convert the hose fitting of the reference and UUT port to 1/4" BSP female One sealing set Instruction sheet in English kts: low-pressure test pump kpn: 700LTP-1 kpn_dash: 700LTP kpn_clear: 700LTP1 bkpn: FLUKE 700LTP-1 bkpn_clear: FLUKE 700LTP1 c_path: Home / Tools / Measuring and inspection technique / Analogue measuring and inspection instruments / Analogue measuring instruments / Pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke analogue measuring and inspection instruments / Fluke analogue measuring instruments / Fluke pressure test pump sr_no_br_cl_ns: 2811763 sr_ns: FLUKE2811763
r: 08107033 p: 1494.49 pid: 166171 b: FLUKE q: 0 st: lt: 8 ean: 0095969865227 sr: FLUKE 4961174 sr_no_br: 4961174 sr_no_br_cl: 4961174 sr_cl: FLUKE4961174 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 4961174 infrared wide-angle lens 0.75X cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description When working in a tight space, you have a large field of view, allowing you to see a larger measurement object up close. See a complete arrangement of switchgear in tight situations, or see more components through an IR window. See the entire side of a building without having to walk too far away, or inspect roofs faster than with a standard lens by looking at a much larger area at once. Avoid the hassle of sending your camera to be calibrated along with the lens. With smart lenses, you can simply attach the lens to any suitable camera and capture images instantly. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Compatible with RSE300 and RSE600 ds: dsc: kts: infrared wide-angle lens 0.75X kpn: 4961174 kpn_dash: kpn_clear: 4961174 bkpn: FLUKE 4961174 bkpn_clear: FLUKE 4961174 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4961174 sr_ns: FLUKE4961174
r: 08121706 p: 1463.59 pid: 166254 b: FLUKE q: 0 st: lt: 8 ean: 0095969393614 sr: FLUKE 2802467 sr_no_br: 2802467 sr_no_br_cl: 2802467 sr_cl: FLUKE2802467 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Low battery message No Automatic shut-off No With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. frequency 1000 kHz Max. resistance 100 MOhm n: FLUKE 8808A/SU multimeter 5.5 digit (software & cable), 240V - 2802467 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 8808A multimeter has a wide functional range and measures voltage, resistance and current with a basic accuracy for DC voltage of 0.015 %. The meter is user-friendly and equipped with innovative features for routine testing and 4-wire precision resistance measurements Resolution of 5.5 digits Accuracy down to 0.015% Sensitive DC leakage current ranges Setting keys on front panel TL2X4 wire measurement method ds: dsc: Scope of delivery 8808A Precision Multimeter Red test lead with cap Black test lead with cap Power cord 1x USB-to-RS232 Adapter Cable (in bag) USB Driver Mini-CD (in case, in pocket) Manual FlukeView Forms Information pack and CD (shrink-wrapped) Product manual CD China RoHS Sheet Fluke Registration Card WEEE Sheet ISO 9001 sheet IEC Conformity Sheet kts: multimeter 5.5 digit (software & cable), 240V kpn: 8808A/SU kpn_dash: kpn_clear: 8808ASU bkpn: FLUKE 8808A/SU bkpn_clear: FLUKE 8808ASU c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2802467 sr_ns: FLUKE2802467
r: 08107020 p: 1460 pid: 74218 b: FLUKE q: 0 st: lt: 8 ean: 0095969397735 sr: FLUKE 2811795 sr_no_br: 2811795 sr_no_br_cl: 2811795 sr_cl: FLUKE2811795 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 700HTH-1 hydraulic test hose - 2811795 cn: ACCESSORIES/PART PRESSURE TEST PUMP cn2: ACCESSORIES/PART PRESSURE TEST PUMP cn_clear: ACCESSORIESPARTPRESSURETESTPUMP d: Product description Hose and connectors fit directly to the Fluke 700HTP-1 test pressure port Includes plugs and caps to eliminate loss of fluid in the hose, eliminating the need to re-prepare the hose Self-sealing connectors with easy hand-held connections Very low volumetric expansion and negligible pressure loss at nominal pressure The Fluke 700HTH-1 hydraulic test hose is a test hose with a working pressure of 10,000 psi, 690 bar with stainless steel and nylon construction for use when connecting a Fluke 700HTH-1 or other hydraulic test pump to a unit being tested. The Fluke 700HTH-1 can be connected simultaneously to a Fluke pressure module under test and a calibration unit from a Fluke 700HTP-1 hydraulic test pump. The 700HTH-1 is compatible with water and non-corrosive oil. ds: dsc: Scope of delivery Hose with M16X2.0 connectors 2 1/4" male NPT to M16X2.0 connectors 1/4" female NPT to 1/4" male BSP adapter Instruction sheet kts: hydraulic test hose kpn: 700HTH-1 kpn_dash: 700HTH kpn_clear: 700HTH1 bkpn: FLUKE 700HTH-1 bkpn_clear: FLUKE 700HTH1 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part pressure test pump | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part pressure test pump sr_no_br_cl_ns: 2811795 sr_ns: FLUKE2811795
