r: 41999362 p: 554.504 pid: 62602 b: GEDORE q: 0 st: lt: 5 ean: 4002805848210 sr: GEDORE 7714220 sr_no_br: 7714220 sr_no_br_cl: 7714220 sr_cl: GEDORE7714220 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 80 Nm Drive profile size 14 x 18 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 80-400 Nm Max. tightening torque 400 Nm n: GEDORE 8482-01 torque spanner c-se 14x18 80-400 nm - 7714220 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Classified according to DIN EN ISO 6789-22017 Type II Class A, calibrated to a maximum permissible deviation of /- 3 % and thus more accurate than the /- 4 % required by the standard. Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly Tool holder enables an extensive range of accessories Depending on the tool, work can be carried out either forwards (e.g. open-end spanner) or sideways (e.g. switchable ratchet and socket spanner) Operation only in the middle of the handle - do not use an extension pipe, as otherwise value shifts may occur Activation only with insertion tool - otherwise value shifts may occur Note the gauge block on the certificate Use only original GEDORE accessories Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision even in heavy continuous use Long service life and long service life Simple operation - quick and reliable tightening of the set torque Convenient adjustment using an attractively designed, captive adjustment knob at the end of the handle With test certificate according to DIN EN ISO 6789-22017, traceable to the national standard via the in-house DAkkS laboratory ds: dsc: kts: torque spanner c-se 14x18 80-400 nm kpn: 8482-01 kpn_dash: 8482 kpn_clear: 848201 bkpn: GEDORE 8482-01 bkpn_clear: GEDORE 848201 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 7714220 sr_ns: GEDORE7714220
r: 02716604 p: 552.727 pid: 51620 b: GEDORE q: 0 st: lt: 6 ean: 4002805935286 sr: GEDORE 2926997 sr_no_br: 2926997 sr_no_br_cl: 2926997 sr_cl: GEDORE2926997 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 60 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 60-300 Nm Max. tightening torque 300 Nm n: GEDORE 8562-001 torque spanner dremometer cr 1/2" 60-300 Nm, with alu push-on nozzle - 2926997 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Application Controlled screw tightening in the range 60 - 300 Nm / 45 - 220 lbf-ft For use in almost all industrial (production) environments Design Classified according to DIN EN ISO 6789-22017 Type II Class A, incl traceable test certificate, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the /- 4% prescribed by the standard, 1/2" drive square with ball lock DIN 3120 - A 12.5 ISO 1174 Automatic stop with tactile and audible signal Double scale with 5 Nm and 5 lbf-ft graduations With push-button release Technical advantages/function Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly No shifting of set values and therefore no impact on accuracy by working with both hands or outside the handle (as with conventional torque spanners). Both the drive square and the pivot point are on one shaft, so lengthening the spanner does not affect the tightening value. Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision, even in heavy continuous use Long service life and long service life Simple operation - quick and reliable tightening of the set torque Convenient adjustment using an attractively designed, captive adjustment knob on the handle end Single or double drive square for controlled clockwise and/or anticlockwise tightening ds: dsc: Scope of delivery Aluminium extension tube No. 8577-700 kts: torque spanner dremometer cr 1/2" 60-300 Nm, with alu push-on nozzle kpn: 8562-001 kpn_dash: 8562 kpn_clear: 8562001 bkpn: GEDORE 8562-001 bkpn_clear: GEDORE 8562001 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 2926997 sr_ns: GEDORE2926997
r: 02232913 p: 549.421 pid: 50102 b: GEDORE q: 0 st: lt: 15 ean: 4017981234047 sr: GEDORE 4662980 sr_no_br: 4662980 sr_no_br_cl: 4662980 sr_cl: GEDORE4662980 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: GEDORE 1101-234013 double reaming device for metric and inch pipes in i-BOXX 72 - 4662980 cn: FLARING TOOL cn2: FLARING TOOL cn_clear: FLARINGTOOL d: Product description For precision fittings according to DIN 74234 For brake lines, hydraulic lines, etc. with a wall thickness of 0.7 to 1.0 mm Malleable cast iron GTW 40 body Painted blue Complete set for metric and/or inch pipes With pipe cutter 4-32 mm Ø and mini pipe cutter 4-16 mm Ø In GEDORE i-BOXX® 72 No. 1101 L Dimensions W 367 x D 316 x H 72 mm ds: dsc: Scope of delivery for metric and inch pipes 1 flange bracket no. 234000 2 clamping blocks no. 234101 + 234102 6 pressure piece 4.75-10 mm no. 234204-234210 4 pressure piece 3/16-3/8" no. 234303-234306 3 auxiliary and pressure pieces no. 234790 + 234801-802 1 mini pipe cutter Ø 4-16 mm no. 231000 1 pipe cutter Ø 4-32 mm no. 232001 1 GEDORE i-BOXX - 72 no. 1101 L kts: double reaming device for metric and inch pipes in i-BOXX 72 kpn: 1101-234013 kpn_dash: 1101 kpn_clear: 1101234013 bkpn: GEDORE 1101-234013 bkpn_clear: GEDORE 1101234013 c_path: Home / Tools / Hand tools / Cutting and bending tools / Bending / Flaring tool | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore cutting and bending tools / Gedore bending / Gedore flaring tool sr_no_br_cl_ns: 4662980 sr_ns: GEDORE4662980
r: 02014268 p: 541.157 pid: 50317 b: GEDORE q: 0 st: lt: 6 ean: 4002805927304 sr: GEDORE 1427105 sr_no_br: 1427105 sr_no_br_cl: 1427105 sr_cl: GEDORE1427105 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 80 Nm Drive profile size 14 x 18 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 80-400 Nm Max. tightening torque 400 Nm n: GEDORE 7482-01 torque spanner c-se a+s 14x18 80-400 nm - 1427105 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Technical advantages/function Locking and securing (A+S) rules out inadvertent or manipulated adjustment, therefore greater process security for the user Classified according to DIN EN ISO 6789-22017 Type II Class A, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the +/- 4% required by the standard Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly Tool holder enables an extensive range of accessories Depending on tool use, work can be carried out either forwards (e.g. push-on spanner) or sideways (e.g. switchable ratchet and socket spanner) Operation only in the middle of the handle - do not use an extension pipe, as otherwise value shifts may occur Activation only with insertion tool - otherwise value shifts may occur Note the gauge block on the certificate Use only original GEDORE accessories Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision even in heavy continuous use Long service life and long service life Simple operation - quick and reliable tightening of the set torque Convenient setting using an attractively designed, captive adjustment knob at the end of the handle With test certificate according to DIN EN ISO 6789-22017, traceable to the national standard via the in-house DAkkS laboratory Fixed Dremometer for series production, wherever the same value needs to be tightened If fixed factory setting is desired, specify Nm value when ordering (price on request) ds: dsc: kts: torque spanner c-se a+s 14x18 80-400 nm kpn: 7482-01 kpn_dash: 7482 kpn_clear: 748201 bkpn: GEDORE 7482-01 bkpn_clear: GEDORE 748201 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 1427105 sr_ns: GEDORE1427105
r: 02233341 p: 541.157 pid: 51025 b: GEDORE q: 0 st: lt: 15 ean: 4017981278676 sr: GEDORE 1611526 sr_no_br: 1611526 sr_no_br_cl: 1611526 sr_cl: GEDORE1611526 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. diameter 6 mm Max. diameter 18 mm n: GEDORE 1100-278601 hand pipe bending set 6-18 mm in L-boxx 136 - 1611526 cn: PIPE BENDING SET cn2: PIPE BENDING SET cn_clear: PIPEBENDINGSET d: Product description Dimensions from 6 to 18 mm up to 180° Application areas Precision steel pipe EN 10305-3 (DIN 2394) Hydraulic pipe EN 10305-1 (DIN 2391) with wall thicknesses of 1.0 - 2.0 mm Multilayer composite pipe up to 16 mm Flexible stainless steel pipe with wall thicknesses of 1.0 - 1.5 mm Can be clamped in a vice or in combination with standard No. 268500 With 8 aluminium bending dies for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm With pipe cutter No. 2180 3 In GEDORE L-BOXX® 136 No. 1100 L Dimensions W 442 x D 357 x H 151 mm ds: dsc: Scope of delivery 1 main body 6-18 mm No. 278670 1 bending arm 6-18 mm insertable No. 278680 8 Aluminium bending dies for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm 1 Tube cutter 3-35 mm Ø No. 2180 3 1 Splint float 3 mm + GEDORE L-BOXX® 136 No. 1100 L kts: hand pipe bending set 6-18 mm in L-boxx 136 kpn: 1100-278601 kpn_dash: 1100 kpn_clear: 1100278601 bkpn: GEDORE 1100-278601 bkpn_clear: GEDORE 1100278601 c_path: Home / Tools / Hand tools / Cutting and bending tools / Sets / Pipe bending set | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore cutting and bending tools / Gedore sets / Gedore pipe bending set sr_no_br_cl_ns: 1611526 sr_ns: GEDORE1611526
r: 03218115 p: 539.628 pid: 59671 b: GEDORE q: 0 st: lt: 3 ean: 4010886962350 sr: GEDORE 3278492 sr_no_br: 3278492 sr_no_br_cl: 3278492 sr_cl: GEDORE3278492 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 110 Nm Drive profile size 3/4" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 110-550 Nm Max. tightening torque 550 Nm n: GEDORE TF-K550 torque spanner Torcofix K 3/4", 110-550 Nm - 3278492 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Application Controlled screw tightening in the range 110 - 550 Nm / 80 - 405 lbf-ft, adjustable, audible and tactile switch-off, robust torque spanner with integrated ratchet Design Classified according to DIN EN ISO 6789-22017 Type II Class A, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the /- 4% required by the standard. Including traceable test certificate (DIN EN ISO 6789-22017) Tbv controlled right- and left-hand tightening (square reversal for changing direction), 3/4" square drive with pin lock Robust, matt powder-coated steel pipe construction, with galvanised ratchet and high-quality plastic parts New ergonomic handle, shaped according to the natural grip position of the hand Clearly identifiable, hand-feeling centring and calibration aid in the middle of the handle Double scale Nm / lbf-ft with vernier (Nm), enlarged viewing window protects against dirt and damage With vernier scale for Nm main scale for setting intermediate scale values Lbf-ft setting via main scale only Vertical arrangement of scale, thus suitable for left- and right-handed users Setting mark directly above the scale, prevents reading errors (parallax error) Unit labelling integrated in the scale frame and also protected against wear and tear via viewing windows, Precise turn-off mechanism generates a clear tactile and audible signal when the set torque value is reached Incl. roll-off safety device, prevents rolling away when the key is put down ds: dsc: kts: torque spanner Torcofix K 3/4", 110-550 Nm kpn: TF-K550 kpn_dash: TF kpn_clear: TFK550 bkpn: GEDORE TF-K550 bkpn_clear: GEDORE TFK550 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 3278492 sr_ns: GEDORE3278492
r: 02302340 p: 530.413 pid: 51386 b: GEDORE q: 0 st: lt: 8 ean: 4002805931639 sr: GEDORE 2641569 sr_no_br: 2641569 sr_no_br_cl: 2641569 sr_cl: GEDORE2641569 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 150 Nm Drive profile size 22 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 150-750 Nm Max. tightening torque 750 Nm n: GEDORE DMZ 750 torque spanner dremaster z 22, 150-750 Nm - 2641569 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Application Controlled screw tightening in the range 150 - 750 Nm / 110 - 550 lbf-ft Adjustable, audible and tactile switch-off robust torque spanner with round pin take-up Design Classified according to DIN EN ISO 6789-22017 Type II Class A including traceable test certificate, calibrated to a maximum permissible deviation of +/- 3% and thus more accurate than the +/- 4% specified in the standard For controlled clockwise and anticlockwise tightening Ergonomically shaped, handy black plastic handle with calibration aid Ergonomically shaped plastic handle with calibration aid Switchover between main scale Nm and secondary scale lbf-ft for preventing reading errors when setting the desired torque With micrometer scale for Nm main scale for setting intermediate scale values Automatic switch-off using audible and tactile signal Ergonomic torque adjustment system with instruction symbol Possibility of quick adjustment using a pin spanner, not included in scope of supply Secure adjustment system Operating gauge 56 mm (Ø 22 mm) Operation only with push-on tools with uniform pitch size - otherwise value shifts may occur Depending on tool use, either forward (e.g. push-on spanner) or sideways (e.g. switchable ratchet and socket spanner) operation is possible ds: dsc: kts: torque spanner dremaster z 22, 150-750 Nm kpn: DMZ 750 kpn_dash: kpn_clear: DMZ750 bkpn: GEDORE DMZ 750 bkpn_clear: GEDORE DMZ750 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 2641569 sr_ns: GEDORE2641569
r: 41150470 p: 516.363 pid: 59837 b: GEDORE q: 0 st: lt: 5 ean: 4002805857328 sr: GEDORE 7683590 sr_no_br: 7683590 sr_no_br_cl: 7683590 sr_cl: GEDORE7683590 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 40 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 40-200 Nm Max. tightening torque 200 Nm n: GEDORE 8573-02 torque spanner dremometer bc in case - 7683590 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description 8573-02 DREMOMETER BC 1/2" 40-200 Nm, in box Features Controlled tightening of screws in the range 40-200 N-m / 30-150 lbf-ft,application in almost all industrial sectors,Design: classified according to DIN EN ISO 6789:2003 type II class A,with a factory certificate Accuracy: +/- 3 % of the set scale value Exceeds the guideline of the standard (+/- 4 %),1/2" drive square with ball lock DIN 3120 - A 12.5,ISO 1174,automatic shut-off with tangible and audible signal,double scale with 5 N-m and 5 lbf-ft scale,drive square with push-button release (type BC),With push-button release,Technical advantages/function: Light but robust (because the housing is made of a single piece of aluminium),Very workshop-friendly,No shifting of set values and thus no influence on accuracy by working with both hands or outside the handle (as with conventional torque spanners).,Both the drive square and the pivot point are on one shaft,so extending the spanner does not affect the tightening value...,Extremely low wear due to force reduction on the lever mechanism,Forged lever chain from the GEDORE quality works,High accuracy, even in continuous heavy-duty use,Long service life and long operating life,Simple operation - quick and reliable tightening of the set torque,Convenient setting using an attractively designed, captive adjustment knob at the end of the handle,Single or double drive square for controlled clockwise and/or anticlockwise tightening ds: dsc: kts: torque spanner dremometer bc in case kpn: 8573-02 kpn_dash: 8573 kpn_clear: 857302 bkpn: GEDORE 8573-02 bkpn_clear: GEDORE 857302 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 7683590 sr_ns: GEDORE7683590
r: 02011329 p: 511.404 pid: 50310 b: GEDORE q: 0 st: lt: 6 ean: 4002805925935 sr: GEDORE 1225669 sr_no_br: 1225669 sr_no_br_cl: 1225669 sr_cl: GEDORE1225669 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 80 Nm Drive profile size 16 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 80-400 Nm Max. tightening torque 400 Nm n: GEDORE 7462-01 torque spanner dremometer cz a+s 16z 80-400 Nm - 1225669 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Technical advantages/function Locking and securing (A+S) rules out inadvertent or manipulated adjustment, therefore greater process security for the user Classified to DIN EN ISO 6789-22017 Type II Class A including traceable test certificate, calibrated to a maximum permissible deviation of +/- 3% and thus more accurate than the +/- 4% specified in the standard Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly Depending on tool use, either forward (e.g. push-on spanner) or sideways (e.g. switchable ratchet and socket spanner) operation is possible Operation only in the middle of the handle - do not use an extension pipe, otherwise value shifts may occur (except for model DXZ - here the DREMOMETER is calibrated and adjusted with the extension pipe). Operation is only possible with plug-in tools of uniform size - otherwise value shifts may occur Note the gauge block on the certificate Use only original GEDORE accessories Large diameter of the pin's toolholder transmits large torques Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision, even in continuous heavy use Simple operation - quick and reliable tightening of the set torque Convenient adjustment using an attractively designed, captive adjustment knob at the end of the handle With test certificate according to DIN EN ISO 6789-22017, traceable to the national standard via the in-house DAkkS laboratory Fixed Dremometer for series production, wherever the same value needs to be tightened If fixed factory setting is desired, specify Nm value when ordering (price on request) ds: dsc: kts: torque spanner dremometer cz a+s 16z 80-400 Nm kpn: 7462-01 kpn_dash: 7462 kpn_clear: 746201 bkpn: GEDORE 7462-01 bkpn_clear: GEDORE 746201 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 1225669 sr_ns: GEDORE1225669
r: 41946992 p: 508.099 pid: 63697 b: GEDORE q: 0 st: lt: 5 ean: 4002805846216 sr: GEDORE 7704340 sr_no_br: 7704340 sr_no_br_cl: 7704340 sr_cl: GEDORE7704340 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 80 Nm Drive profile size 16 mm VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 80-400 Nm Max. tightening torque 400 Nm n: GEDORE 8462-01 torque spanner dremometer cz 16z 80-400 nm - 7704340 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Classified according to DIN EN ISO 6789-22017 Type II Class A, incl traceable test certificate, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the /- 4% required by the standard. Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly Depending on tool use, work can be carried out either forwards (e.g. push-on spanner) or sideways (e.g. switchable ratchet and socket spanner) Operation only in the middle of the handle - do not use an extension pipe, otherwise value shifts may occur (except for model DXZ - here the DREMOMETER is calibrated and adjusted with the extension pipe). Operation is only possible with plug-in tools of uniform size - otherwise value shifts may occur Note the gauge block on the certificate Use only original GEDORE accessories Large diameter of the pin's toolholder transmits large torques Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision, even in heavy continuous use Long service life and long service life Simple operation - quick and reliable tightening of the set torque Convenient adjustment using an attractively designed, captive adjustment knob at the end of the handle With test certificate in accordance with DIN EN ISO 6789-22017, traceable to the national standard via the in-house DAkkS laboratory ds: dsc: kts: torque spanner dremometer cz 16z 80-400 nm kpn: 8462-01 kpn_dash: 8462 kpn_clear: 846201 bkpn: GEDORE 8462-01 bkpn_clear: GEDORE 846201 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 7704340 sr_ns: GEDORE7704340
r: 02011253 p: 508.099 pid: 50564 b: GEDORE q: 0 st: lt: 6 ean: 4002805756218 sr: GEDORE 7709650 sr_no_br: 7709650 sr_no_br_cl: 7709650 sr_cl: GEDORE7709650 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 60 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analogue Adjustable torque range 60-300 Nm Max. tightening torque 300 Nm n: GEDORE 7562-10 torque spanner dremometer c a+s 1/2" 60-300 Nm - 7709650 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Technical advantages/function Locking and securing (A+S) rules out inadvertent or manipulated adjustment, therefore greater process security for the user Classified according to DIN EN ISO 6789-22017 Type II Class A, incl traceable test certificate, calibrated with a maximum permissible deviation of +/- 3% and thus more accurate than the /- 4% required by the standard Light but robust (because the housing is made of a single piece of aluminium), very workshop-friendly No shifting of set values and therefore no impact on accuracy by working with both hands or outside the handle (as with conventional torque spanners). Both the drive square and the pivot point are on one shaft, so lengthening the spanner does not affect the tightening value. Extremely low wear due to force reduction on the lever mechanism Forged lever chain from the in-house GEDORE quality forge High precision, even in heavy continuous use Long service life and long service life Simple operation - fast and reliable tightening of the set torque Single or double drive square for controlled clockwise and/or anticlockwise tightening Application Controlled screw tightening in the 6 - 3000 Nm range For use in almost all industrial (production) environments Version With certificate in accordance with DIN EN ISO 6789, traceable to the national standard via our own DAkkS laboratory Automatic switch-off with tactile and audible signal Double scale with corresponding graduation (see table) Type B, BC, C drive square with push-button release Fixed Dremometer for series production, wherever the same value has to be honed If fixed factory setting is required, specify Nm value when ordering (price on request) ds: dsc: kts: torque spanner dremometer c a+s 1/2" 60-300 Nm kpn: 7562-10 kpn_dash: 7562 kpn_clear: 756210 bkpn: GEDORE 7562-10 bkpn_clear: GEDORE 756210 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore torque tools / Gedore torque wrenches / Gedore torque wrench sr_no_br_cl_ns: 7709650 sr_ns: GEDORE7709650
r: 41150452 p: 491.239 pid: 33252 b: GEDORE q: 0 st: lt: 6 ean: 4002805754160 sr: GEDORE 7687150 sr_no_br: 7687150 sr_no_br_cl: 7687150 sr_cl: GEDORE7687150 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1" Connection size 1" Connection profile Internal square Type of drive profile External square n: GEDORE 754-16 push-on ratchet head 1", left - 7687150 cn: RATCHET HEAD cn2: RATCHET HEAD cn_clear: RATCHETHEAD d: Product description Application In combination with the DREMOMETER for controlled tightening of screws Design Smooth-running, robust plug-in ratchet With 1/4", 3/8", 1/2", 3/4" or 1" drive square Right-handed models (No. 754-00 to -06) Left-handed models (No. 754-11 to -16) Made of chrome vanadium steel Scope of delivery Push-on ratchet Individually, in a polybag, *Maximum permanent load of the drive square according to DIN EN ISO 67892003, resp. the maximum load of the holder ds: dsc: Scope of delivery Push-on ratchet, individually packed in a polybag, made of chrome vanadium steel Maximum permanent load of the drive square according to DIN EN ISO 6789:2003 Maximum load of the holder kts: push-on ratchet head 1", left kpn: 754-16 kpn_dash: 754 kpn_clear: 75416 bkpn: GEDORE 754-16 bkpn_clear: GEDORE 75416 c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet head | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore sockets and ratchets / Gedore ratchets / Gedore ratchet head sr_no_br_cl_ns: 7687150 sr_ns: GEDORE7687150
r: 01040702 p: 483.305 pid: 52165 b: GEDORE q: 0 st: lt: 6 ean: 4036976112405 sr: GEDORE 1675982 sr_no_br: 1675982 sr_no_br_cl: 1675982 sr_cl: GEDORE1675982 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: GEDORE 1.04/ST trigger set on standard 1.04/1a-1.04/3a - 1675982 cn: PULLER SET cn2: PULLER SET cn_clear: PULLERSET d: Product description Consisting of 3 pulls in different sizes Robust die-forged design Thanks to the bending moment reinforcement at the top, the ergonomically shaped traverse provides even higher and reliable release torques If required, the spindle can be replaced by a hydraulic spindle (see table) The quick adjustment feature contributes to ergonomic and fast working Interchangeable spindle tip (ball or pointed) Suitable for use with a hydraulic spindle (see table) ds: dsc: Scope of delivery 1.04/1A Universal puller 2-armed 130x100 mm 1.04/2A Universal puller 2-armed 200x150 mm 1.04/3A Universal puller 2-armed 350x200 mm 1.04/97 Empty stand for 1.04 series kts: trigger set on standard 1.04/1a-1.04/3a kpn: 1.04/ST kpn_dash: kpn_clear: 104ST bkpn: GEDORE 1.04/ST bkpn_clear: GEDORE 104ST c_path: Home / Tools / Hand tools / Pullers / Sets / Puller set | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore sets / Gedore puller set sr_no_br_cl_ns: 1675982 sr_ns: GEDORE1675982
