HG 110500100 tile protector 5000 ml

Product description

HG tile protector is an easy-to-apply, liquid polymer emulsion for all types of floor tiles, flagstones and slate. After drying, this emulsion forms a shiny and wafer-thin, but extremely strong protective film, protecting the tile against stains, soiling, scratches and wear, while also deepening its colour and structure. This protective film also gives an anti-slip effect.

Application

Tile cleaner

Instructions for use

• The surface must be completely clean, free of grease and dust
• The glue/soil and joints of new floors should be fully cured and dry
• This usually requires 4-6 weeks drying time
• Existing, still porous floors must be thoroughly dry after cleaning
• Floor heating must be switched off for at least 12 hours before treatment with this product
• Porous floors must first be treated with HG tile impregnating protector (product 13)
• Do not shake before use and preferably apply with a wax dispenser (see illustration on front of bottle)
• If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used
• On a coarse surface, use a paint roller (fur roller)
• Pour the liquid onto the floor and spread in straight lines in one direction
• Do not twist or rub
• When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat
• Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days
• Consumption: 80 m² per 2 litres per coat