Product description
- Protects against wear and tear and topcoat deterioration
- Gives gloss
- For all types of natural stone floors
HG natural stone protector is a very easy-to-apply liquid polymer emulsion which, once dry, forms a shiny and wafer-thin but extremely strong and protective film. This protects the top layer of natural stone against wear and tear and damage or attack by acids such as soft drinks and wine. This protector also gives an anti-slip effect.
Application
Cleaning floor
Instructions for use
- The surface must be completely clean, free of grease and dust
- For the necessary treatments: see the HG natural stone floors treatment matrix on the side of this bottle
- The adhesive/specs and joints of new floors must be fully cured and dry
- This usually requires a drying time of 4-6 weeks
- Existing floors must be thoroughly dry after cleaning
- Any underfloor heating should be switched off for at least 12 hours before applying this product
- For good distribution, use a wax dispenser (see illustration on front of this bottle)
- If desired, a lint-free, clean (tea) cloth wrapped around a squeegee can also be used
- On coarse surfaces, use a paint roller (fur roller), but avoid excessive foaming during application with the roller
- Dilute the liquid 1:1 with cold water, then pour the solution over the floor and spread it, without exerting pressure on the wax dispenser or roller, in one direction over the floor
- When the product has dried (after about 40 minutes), a second coat can be applied at right angles to the first coat
- Approximately 3 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days
- Consumption: 60-80 m2 per litre per coat
