Product description
- Less pungent odour
- Better to target
HG mould stain cleaners instantly destroy all mould, making the dirty black spots disappear. These unsightly black mould, moisture or weather spots are common in silicone joints between bathtub and tile wall, in the shower cubicle and in plasterwork. A regular spray variant is available: the HG mould stain cleaner, as well as a foam spray: the HG mould stain cleaner foam spray. Both extremely effective, but the unique foam formula has a less pungent smell, is even better at targeting the mould and, of course, gives less chance of splashing. In addition, the foam has the property of staying on longer and therefore provides better and longer penetration.
Instructions for use
- Remove the lock before use
- If you have used the bottle before, there may be residue of the liquid left in the nozzle which could impair its performance when reused. We therefore advise you to always rinse the nozzle thoroughly with hot water from the tap, e.g. via the vent holes on the side of the foam nozzle, in case of reuse.
- The product has a bleaching effect; in case of doubt, first test on an inconspicuous place
- Do not remove mould in advance
- Press the nipple on the front side and turn a quarter turn
- Spray the surface from a distance of 3-5 cm
- In case of stubborn contamination, spray again after 30 minutes and allow to take effect for 30 minutes
- Clean the sprayed surface with water and a sponge
- Wash off elastic joints (e.g. silicone sealant) after approx. 30 minutes and spray again
- After use, turn back the nipple a quarter turn (lock position)
- Consumption: 2-3 m2 wall surface, 6-8 m2 tile joints
