KUKKO 8-02 hydraulic spindle - 12 tonnes

Product description:

• Quality "Made in Germany
• Solid quality, large capacity and long service life
• Security sticker against plagiarism
• Including tube of KUKKO special grease
• Product video available
• Grease hydraulic
• Thread is provided with special coating

• For loosening particularly stuck bearings, gears, etc.

• Due to the large pressure capacity, good to use for very stuck parts, which are quickly and effortlessly loosened
• Can be combined with various mechanical pullers from the KUKKO range
• The collar on the 6 side of the spindle prevents the spanner from slipping off.
• Many parts are available separately and fitted with their own part number.

• 1. Unscrew the 6-knt from the spindle
• 2. Turn the spindle into the bridge from below until it comes out approx. 60 mm above it.
• 3. Tighten the 6-knt on the spindle
• 4. Before use, check that the pressure spindle is sufficiently screwed back. It should be in the initial position
• 5. Tightening the spindle, using a torque spanner, builds up the required pressure.
• 6. Turn the spindle back to the starting position

• Observe max. tightening torque
• Do not use with an electric or pneumatic impact wrench
• Use safety shield
• Wear safety goggles