r: 02260370 p: 7.44 pid: 100139 b: MAPA q: 0 st: lt: 10 ean: 3245424801285 sr: MAPA 34480018 sr_no_br: 34480018 sr_no_br_cl: 34480018 sr_cl: MAPA34480018 sr_dash: sold: 803.52 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003 Length 460 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 2 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 480 Protection Mechanical; Chemicals n: MAPA 480 ultra nitrile gloves - 34480010 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-long chemical protection Optimal service life: excellent mechanical resistance (abrasion, perforation) Excellent protection during intensive handling of very hazardous chemicals Good grip resistance on smooth objects, thanks to the relief texture Applications: Automotive/mechanical industry Treatment/degreasing of materials with aggressive solvents Other sectors Maintenance Wood treatment and finishing Pesticide application Cleaning of printing presses Chemical industry Handling drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not leave the gloves in contact with any chemical agent for longer than the measured reference time. refer to the chemical resistance table below or contact technical customer service Mapa professionnel to ask for the reference time. use 2 pairs alternately if longer contact with a solvent is unavoidable. Raise the cuff to prevent a hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: using the gloves or cleaning or washing them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: ultra nitrile gloves kpn: 480 kpn_dash: kpn_clear: 480 bkpn: MAPA 480 bkpn_clear: MAPA 480 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34480018 sr_ns: MAPA34480018
r: 02210138 p: 1.13 pid: 100060 b: MAPA q: 0 st: lt: 8 ean: 3245425504499 sr: MAPA 34550559 sr_no_br: 34550559 sr_no_br_cl: 34550559 sr_cl: MAPA34550559 sr_dash: sold: 791 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003 Colour (manufacturer) White Material PUR - Polyurethane Color White EN388 D - Puncture resistance 1 EN388 C - Tear resistance 3 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultrane 550 Protection Mechanical n: MAPA 550 gloves ultrane polyurethane foam - 34550568 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: The best for accuracy Excellent resistance to abrasion longer Excellent tactile sensitivity, thanks to the reduced thickness of the glove Absorption of perspiration provided by polyurethane cellular structure. Enhanced comfort thanks to seamless cotton flock lining Applications: Automotive/mechanical industry Complex assembly Sorting of small parts Mounting small screws and clamps Electronics Mounting electronic components (screens, LED, etc.) Riveting high-frequency antennas Handling microprocessors Cosmetic and pharmaceutical industry Preparation of cosmetics Production of pharmaceuticals Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from those tested in laboratories. Use the gloves with dry, clean hands. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves ultrane polyurethane foam kpn: 550 kpn_dash: kpn_clear: 550 bkpn: MAPA 550 bkpn_clear: MAPA 550 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34550559 sr_ns: MAPA34550559
r: 02022081 p: 6.97 pid: 100020 b: MAPA q: 0 st: lt: 8 ean: 3245423251203 sr: MAPA 34325000 sr_no_br: 34325000 sr_no_br_cl: 34325000 sr_cl: MAPA34325000 sr_dash: sold: 697 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 370 mm Colour (manufacturer) Orange Material Latex Color Orange EN388 D - Puncture resistance 1 EN388 C - Tear resistance 3 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Harpon 325 Protection Mechanical; Chemicals; Heat resistance n: MAPA 325 gloves harpon natural latex - 34325009 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and safety when handling heavy, rough or slippery objects in highly aggressive environments Suitable for prolonged wear, due to the comfort of textile reinforcement and good thermal insulation Optimal service life: high resistance to abrasion Forearm protection. Applications: Fishing Fish handling Oyster production Working with frozen products Food industry Fisheries Oyster production Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not leave the gloves in contact with any chemical agent for longer than the measured reference time. refer to the chemical resistance table below or contact technical customer service Mapa professionnel to ask for the reference time. use 2 pairs alternately if longer contact with a solvent is unavoidable. Raise the cuff to prevent a hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Before removing gloves, clean them properly: When used with a solvent (alcohol, etc.) : wipe with a dry cloth When used with cleaning agents, acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves harpon natural latex kpn: 325 kpn_dash: kpn_clear: 325 bkpn: MAPA 325 bkpn_clear: MAPA 325 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34325000 sr_ns: MAPA34325000
r: 02022129 p: 2.17 pid: 101628 b: MAPA q: 290 st: 1 lt: 1 ean: 3245424921297 sr: MAPA 34492209 sr_no_br: 34492209 sr_no_br_cl: 34492209 sr_cl: MAPA34492209 sr_dash: sold: 672.7 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 320 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 1 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 492 Protection Mechanical; Chemicals n: MAPA 492 gloves ultranitrile - 34492209 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Excellent mechanical resistance for long-term chemical protection Handiness and comfort thanks to the anatomical cut of the gloves and the quality of the flock lining Longer service life: excellent mechanical resistance (abrasion, puncture) Applications: Automotive/mechanical industry Handling/degreasing materials with solvents Machining parts with cutting oil Local authorities (cleaning) Handling aggressive chemicals Construction (carpentry) Working with PVC-based liners Preparation of coatings, vanishing Construction (bricklayer/plasterer) Working with oil, solvents and detergents Local authorities (parks and public areas) Plant treatment products Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as conditions of use may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gloves ultranitrile kpn: 492 kpn_dash: kpn_clear: 492 bkpn: MAPA 492 bkpn_clear: MAPA 492 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34492209 sr_ns: MAPA34492209
r: 02022141 p: 50.578 pid: 100033 b: MAPA q: 6 st: 1 lt: 1 ean: 3245426503101 sr: MAPA 34650000 sr_no_br: 34650000 sr_no_br_cl: 34650000 sr_cl: MAPA34650000 sr_dash: sold: 657.514 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 350 mm Colour (manufacturer) Black Material Butyl Color Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 1 Model name Butoflex 650 Protection Mechanical; Chemicals n: MAPA 650 butoflex butyl gloves - 34650008 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Highest specific chemical protection The only butyl glove on the market with an exclusive embossed outer finish, allowing handling of slippery objects without danger. Exceptional comfort, the first butyl glove with a fabric inner lining Highest specific chemical protection, for highly corrosive acids, ketone, esters and amine derivatives. Unique flexibility and dexterity Applications: Cosmetic and pharmaceutical industries Handling in laboratories Mechanical industry Metal processing and degreasing Chemical industry Sampling of chemical products Handling and repackaging of chemical products Compounding of paints, varnishes, resins and inks Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to thiuraam or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not leave the gloves in contact with any chemical agent for longer than the measured reference time. refer to the chemical resistance table below or contact technical customer service Mapa professionnel ([email protected]) to ask for the reference time. use 2 pairs alternately if longer contact with a solvent is unavoidable. Raise the cuff to prevent a hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, protected from humidity and heat, at min. 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: butoflex butyl gloves kpn: 650 kpn_dash: kpn_clear: 650 bkpn: MAPA 650 bkpn_clear: MAPA 650 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34650000 sr_ns: MAPA34650000
r: 02399490 p: 6.32 pid: 100138 b: MAPA q: 72 st: 1 lt: 1 ean: 3245427004102 sr: MAPA 34700010 sr_no_br: 34700010 sr_no_br_cl: 34700010 sr_cl: MAPA34700010 sr_dash: sold: 613.04 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 511: 2006 Length 240 mm Colour (manufacturer) Blue/Black Color Blue; Black EN388 D - Puncture resistance 2 EN388 C - Tear resistance 2 EN388 B - Cut resistance 2 EN388 A - Abrasion resistance 3 Model name Tempdice 700 Protection Mechanical; Cold resistant n: MAPA 700 temp-ice gloves special nitrile coating grip&proof - 34700019 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Increased durability to push the cold-boundary. Thanks to the insulating textile backing, temp Ice 700 is the new benchmark in its class: work in environments up to 10°c while maintaining comfort, dexterity and dexterity. Coating life is 5 times greater than standard gloves on the market. Excellent grip when handling wet parts. Results in reduced muscle fatigue and increased productivity. Stay dry during work in wet conditions thanks to waterproofing and water-repellent property at strategic points of the glove. Washable up to 5 wash cycles (see washing and drying instructions) Suitable for food contact according to the French Legislation of 9 November 1994 and according to the european directive cce1935/2004, the temp Ice is suitable for handling fatty foods with at least a reduction factor of 3, dry and frozen foods. Applications: Transport, logistics Order preparation Other sectors Maintenance in cold or wet environments Handling building materials Local authorities (waste collection and processing) Waste collection Local authorities (catering) Local authorities (parks and public areas) Public parks : maintenance and landscaping Local authorities (roads and highways) Road works Instructions for use: It is recommended to check the suitability of the gloves for their intended use, as workplace conditions may differ from "ce" type tests. The use of these gloves is not recommended for persons sensitive to natural latex Rubber. Ensure clean, dry hands before donning the gloves. Before use, check that the inside of the glove is dry. The gloves may lose their insulating properties when wet. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Clean oil- or grease-contaminated gloves with a dry cloth before removing them. Characteristics of the glove are not adversely affected up to 5 washes* under the conditions described above : the use of an industrial washing machine, a standard liquid detergent, synthetic programme at 60° and spin at 400 rpm. Inappropriate use as well as cleaning or bleaching in a manner not specifically recommended may affect performance levels. However, the user or person washing is responsible for following the washing instructions* test performed: 5 consecutive washes with unused gloves. Drying conditions: Drying cabinet at 60° maximum. ensure clean, dry hands before donning gloves. check that the inside of the glove is dry before use. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: temp-ice gloves special nitrile coating grip&proof kpn: 700 kpn_dash: kpn_clear: 700 bkpn: MAPA 700 bkpn_clear: MAPA 700 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34700010 sr_ns: MAPA34700010
r: 02091271 p: 10.55 pid: 100610 b: MAPA q: 72 st: 1 lt: 1 ean: 3245425824191 sr: MAPA 34582489 sr_no_br: 34582489 sr_no_br_cl: 34582489 sr_cl: MAPA34582489 sr_dash: sold: 611.9 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003 Colour (manufacturer) Black Color Black EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance X EN388 A - Abrasion resistance 4 Model name Krytech 582 Protection Mechanical n: MAPA 582 gloves krynit special nitrile coating grip&proof - 34582489 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Special coating grip&proof for improved waterproofing and optimal grip in oily contact Optimal cut protection: level 5 Excellent abrasion resistance: longer lifetime Textile backing in striking blue to quickly identify the level of cut protection in the workplace Washable up to 5 wash cycles (see washing and drying instructions) Applications: Automotive/mechanical industry Metalworking Assembling thin metal sheets Crushing, stamping and assembling metal Handling metal parts Finishing of sharp components Glass industry Handling glass sheets Mechanical industry Cutting and stamping of metal Instructions for use: It is recommended to check that the gloves are suitable for their intended use, as workplace conditions may differ from "ce" type tests. The use of these gloves is not recommended for persons sensitive to dithiocarbamate or natural latex (wrist with elastic band in natural rubber). Ensure clean, dry hands before putting on the gloves. Ensure that the inside of the gloves is dry before putting them back on. Check gloves for cut damage and tears before reusing. Do not use near moving machinery. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Clean oil- or grease-contaminated gloves with a dry cloth before removing them. Characteristics of the glove are not adversely affected up to 5 washes* under the conditions described above : the use of an industrial washing machine, a standard liquid detergent, synthetic programme at 60° and spin at 400 rpm. Inappropriate use as well as cleaning or bleaching in a manner not specifically recommended may affect performance levels. However, the user or person washing is responsible for following the washing instructions* test performed: 5 consecutive washes with unused gloves. Drying conditions: Drying cabinet at 60 c maximum Ensure dry, clean hands before donning gloves Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous according to european parliament and council directive 1272/2008/ec. This product contains less than 0.1% of very serious care substances (svhc) or of any substance listed in annex xvii of regulation no 1907/2006 of the european parliament and of the council (reach). Additional information: Guaranteed free of dmf and free of silicone on the palm, fingers and parts of the backside ds: dsc: kts: gloves krynit special nitrile coating grip&proof kpn: 582 kpn_dash: kpn_clear: 582 bkpn: MAPA 582 bkpn_clear: MAPA 582 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34582489 sr_ns: MAPA34582489
r: 02260132 p: 3.49 pid: 101952 b: MAPA q: 0 st: lt: 8 ean: 3245423753189 sr: MAPA 34375018 sr_no_br: 34375018 sr_no_br_cl: 34375018 sr_cl: MAPA34375018 sr_dash: sold: 523.5 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003 Length 260 mm Colour (manufacturer) Yellow Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Yellow EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Titan 375 Protection Mechanical n: MAPA 375 dextram nitrile gloves - 34375017 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Adapted protection for all light work The right compromise: longer life of precision work gloves, but offers better comfort and dexterity than heavy-duty gloves Extremely comfortable lining: no seams on the contact surfaces Good resistance to abrasion Protection against moisture, oil, and grease splashes Applications: Automotive/mechanical industry Precision mechanical work Handling oily mechanical parts Construction (painting/decorating) Application of coatings Surface treatment Other sectors Woodworking Sandblasting Packaging Assembling small electrical components Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions at the workplace may differ from "ce" type tests. Use the gloves with dry, clean hands. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Rub gloves soiled with oil or grease with a dry cloth before removing them. Check gloves for cuts and holes before reusing them. Storage conditions: Store the gloves in their original packaging, protected from direct light and heat sources. Washing conditions: Please note that using the gloves or cleaning or washing them in any other way may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: dextram nitrile gloves kpn: 375 kpn_dash: kpn_clear: 375 bkpn: MAPA 375 bkpn_clear: MAPA 375 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34375018 sr_ns: MAPA34375018
r: 02260583 p: 3.02 pid: 100345 b: MAPA q: 0 st: lt: 8 ean: 3245424912295 sr: MAPA 34491019 sr_no_br: 34491019 sr_no_br_cl: 34491019 sr_cl: MAPA34491019 sr_dash: sold: 453 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 320 mm Colour (manufacturer) Green Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Green EN388 D - Puncture resistance 1 EN388 C - Tear resistance 0 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Ultranitril 491 Protection Mechanical; Chemicals n: MAPA 491 ultra nitrile gloves - 34491016 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Excellent mechanical resistance for long-term chemical protection Handiness and comfort thanks to the anatomical cut of the gloves and the quality of the flock lining Longer service life: excellent mechanical resistance (abrasion, puncture) Applications: Automotive/mechanical industry Handling/degreasing materials with solvents Machining parts with cutting oil Other sectors Maintenance Wood treatment and finishing Pesticide application Cleaning of printing presses Chemical industry Production and application of paints and varnishes Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: ultra nitrile gloves kpn: 491 kpn_dash: kpn_clear: 491 bkpn: MAPA 491 bkpn_clear: MAPA 491 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34491019 sr_ns: MAPA34491019
r: 02260791 p: 7.97 pid: 100145 b: MAPA q: 37 st: 1 lt: 1 ean: 3245425864104 sr: MAPA 34586030 sr_no_br: 34586030 sr_no_br_cl: 34586030 sr_cl: MAPA34586030 sr_dash: sold: 398.5 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003 Colour (manufacturer) Blue Material PUR - Polyurethane Color Blue EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance X EN388 A - Abrasion resistance 4 Model name Krytech 586 Protection Mechanical n: MAPA 586 krytech polyurethane gloves - 34586038 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Particularly effective protection for intricate handling in a fairly clean environment With hdpe fibres for excellent cut resistance with reduced thickness for good dexterity. Optimal cut resistance, level 5 Excellent dexterity thanks to precise fit Extra comfort and flexibility A visible indicator in blue textile to easily determine the cut On-the-job performance Washable up to 3 wash cycles (see washing and drying instructions) Applications: Automotive/mechanical industry Handling of metal parts Mounting thin metal sheets Finishing sharp parts Plastic industry Removal of material after injection Local authorities (technical maintenance) Maintenance work with cutting risk Construction (roofers/windows and doors) Window fitters Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as the working conditions at the workplace may differ from the "ce" type tests Persons sensitive to natural latex are not advised to use them Use the gloves with dry, clean hands.Ensure that the inside of the gloves is dry before putting them back on.Check the gloves for cuts and holes before using them Do not use these gloves next to moving machinery. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Clean oil- or grease-contaminated gloves with a dry cloth before removing them. Characteristics of the glove are not adversely affected up to 3 washes* under the conditions described above : the use of an industrial washing machine, a standard liquid detergent, synthetic programme at 60° and spin at 400 rpm. Inappropriate use as well as cleaning or bleaching in a manner not specifically recommended may affect performance levels. However, the user or person washing is responsible for following the washing instructions* test performed: 3 consecutive washes with unused gloves. Drying conditions: Drying cabinet at 60 c maximum. ensure dry, clean hands before putting on gloves. ensure that the inside of the gloves is dry before putting them back on Legislation: This product is not classified as hazardous under regulation (ec) no 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and of the council (reach). ds: dsc: kts: krytech polyurethane gloves kpn: 586 kpn_dash: kpn_clear: 586 bkpn: MAPA 586 bkpn_clear: MAPA 586 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34586030 sr_ns: MAPA34586030
r: 02260336 p: 2.53 pid: 100672 b: MAPA q: 0 st: lt: 8 ean: 3245424541280 sr: MAPA 34454018 sr_no_br: 34454018 sr_no_br_cl: 34454018 sr_cl: MAPA34454018 sr_dash: sold: 379.5 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 374: 2003 Length 310 mm Colour (manufacturer) Turquoise Material Synthetic elastomer Color Blue EN388 D - Puncture resistance 0 EN388 C - Tear resistance 0 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 3 Model name Ultranitril 454 Protection Mechanical; Chemicals n: MAPA 454 optimo synthetic elastomer gloves - 34454018 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Accuracy in mildly aggressive environments, for people sensitive to natural latex Excellent accuracy, thanks to the qualities of mapa's unique synthetic material Good grip on smooth objects, thanks to the relief texture Optimal comfort: anatomical shape, new flake quality Applications: Health Common tasks in hospitals and clinics Local authorities (cleaning) Handling household detergents Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent chemical product from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from direct sunlight and heat sources. Washing conditions: Before removing the gloves, clean them properly: When used with a solvent (naphtha, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: optimo synthetic elastomer gloves kpn: 454 kpn_dash: kpn_clear: 454 bkpn: MAPA 454 bkpn_clear: MAPA 454 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34454018 sr_ns: MAPA34454018
r: 02262855 p: 1.77 pid: 100095 b: MAPA q: 0 st: lt: 8 ean: 3245425203194 sr: MAPA 34520169 sr_no_br: 34520169 sr_no_br_cl: 34520169 sr_cl: MAPA34520169 sr_dash: sold: 354 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003; EN 421 Length 335 mm Colour (manufacturer) White Material Latex Color White EN388 D - Puncture resistance 0 EN388 C - Tear resistance 1 EN388 B - Cut resistance 0 EN388 A - Abrasion resistance 3 Model name Vital 520 Protection Mechanical; Chemicals; Radiation and radioactive contamination n: MAPA 520 gantex natural latex gloves - 34520156 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Long-term use and resistance to oil and grease Comfortable cotton flock lining Chlorinated finish for better protection of products to be handled Suitable for food contact Applications: Suitable for everyday cleaning Handling household detergents Handling food / the food industry Preparation and packaging of ... Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to natural latex, thiuraam, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Before removing gloves, clean them properly: When used with a solvent (alcohol, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Caution: using the gloves or cleaning or washing them in a manner not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: gantex natural latex gloves kpn: 520 kpn_dash: kpn_clear: 520 bkpn: MAPA 520 bkpn_clear: MAPA 520 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34520169 sr_ns: MAPA34520169
r: 02055800 p: 2.27 pid: 101668 b: MAPA q: 80 st: 1 lt: 1 ean: 3245423884203 sr: MAPA 34388000 sr_no_br: 34388000 sr_no_br_cl: 34388000 sr_cl: MAPA34388000 sr_dash: sold: 340.5 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003 Colour (manufacturer) Blue Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Blue EN388 D - Puncture resistance 1 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Titan 388 Protection Mechanical n: MAPA 388 titan nitrile gloves - 34388009 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and durability for heavy-duty work Freedom of movement: exceptionally comfortable textile reinforcement (no seams on contact surfaces) Excellent resistance to oil and grease Longer service life: quality of textile reinforcement and nitrite lining Applications: Other sectors Household waste collection Forestry Mechanical industry Metal cutting Handling thick, uncut sheet metal (without sharp edges) Construction (metal, smithing) Handling and installing metal structures Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to dithiocarbamate are not recommended to use these gloves. Use the gloves with dry, clean hands. Wipe off gloves soiled with oil or grease before removing them. Storage conditions: Store the gloves in their original packaging, protected from light and humidity. Washing conditions: Please note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: titan nitrile gloves kpn: 388 kpn_dash: kpn_clear: 388 bkpn: MAPA 388 bkpn_clear: MAPA 388 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34388000 sr_ns: MAPA34388000
r: 02260099 p: 111.239 pid: 101941 b: MAPA q: 0 st: lt: 8 ean: 3245423441208 sr: MAPA 34344130 sr_no_br: 34344130 sr_no_br_cl: 34344130 sr_cl: MAPA34344130 sr_dash: sold: 333.717 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003; EN 407: 2004 Length 370 mm Colour (manufacturer) Black Material Fluoroelelastomer Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 4 EN388 B - Cut resistance 2 EN388 A - Abrasion resistance 4 Model name Fluotech 344 Protection Mechanical; Chemicals; Heat resistance n: MAPA 344 fluotex fluoroelastomer gloves - 34344130 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Comfort and flexibility for prolonged use Improved comfort for long tasks, thanks to cotton tricot lining High mechanical resistance and long-term use, thanks to textile reinforcement Freedom of movement: good glove flexibility Applications: Other sectors Controlling site contamination Print Petrochemical refinery Emergency interventions at chemical incidents Mechanical industry Metal degreasing and etching Chemical industry Chemical treatments (solvents) Production of resins and adhesives Production of paints and varnishes Handling and transport of chemical products (solvents) Galvanoplasty Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from the "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Do not use these gloves next to moving machinery. Check the gloves for defects before using them. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from humidity and heat. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When using with a solvent (thinner, etc.), wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains more than 0.1% of 4-(1,1,3,3-tetramethylbutyl) phenol, ethoxylated according to regulation no 1907/2006 of the european parliament and of the council concerning the registration, evaluation, authorisation and restriction of chemicals (reach). ds: dsc: kts: fluotex fluoroelastomer gloves kpn: 344 kpn_dash: kpn_clear: 344 bkpn: MAPA 344 bkpn_clear: MAPA 344 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34344130 sr_ns: MAPA34344130
r: 02022117 p: 2.92 pid: 101609 b: MAPA q: 48 st: 1 lt: 1 ean: 3245424011295 sr: MAPA 34401159 sr_no_br: 34401159 sr_no_br_cl: 34401159 sr_cl: MAPA34401159 sr_dash: sold: 321.2 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 310 mm Colour (manufacturer) Black Material Neoprene; Latex Color Black EN388 D - Puncture resistance 0 EN388 C - Tear resistance 1 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 2 Model name Ultraneo 401 Protection Mechanical; Chemicals n: MAPA 401 technic neoprene and natural latex gloves - 34401159 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Tactile sensitivity for light chemical protection Improved comfort thanks to cotton flock lining Good dexterity, thanks to the reduced thickness of the gloves Good grip strength on slippery objects, thanks to the embossed texture Applications: Automotive/mechanical industry Paint spraying Battery production Other sectors Preparation of industrial adhesives Industrial cleaning, maintenance Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store the gloves in their original packaging, at a temperature above 5°c. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: technic neoprene and natural latex gloves kpn: 401 kpn_dash: kpn_clear: 401 bkpn: MAPA 401 bkpn_clear: MAPA 401 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34401159 sr_ns: MAPA34401159
r: 02066311 p: 3.93 pid: 100122 b: MAPA q: 206 st: 1 lt: 1 ean: sr: MAPA 34420039. sr_no_br: 34420039. sr_no_br_cl: 34420039 sr_cl: MAPA34420039 sr_dash: sold: 267.24 p_range: none type: combinations act: 1 avo: 1 av: Glove size 9 Standard EN 388: 2003; EN 374: 2003 Length 310 mm Colour (manufacturer) Black Material Neoprene; Latex Color Black EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 3 Model name Ultraneo 420 Protection Mechanical; Chemicals n: MAPA 420 technic neoprene and natural latex gloves - 34420030. cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Especially supple with freedom of movement for standard chemical protection Freedom of movement, thanks to the flexibility of neoprene and the comfort of cotton flocking Lining Good grip thanks to profiled texture Applications: Automotive/mechanical industry Production of electric accumulators and batteries Chemical industry Handling, loading and unloading of chemical products Other industries Spreading of fertilisers Preparation of industrial adhesives Industrial cleaning, maintenance Instructions for use: Store gloves in their original packaging, at a temperature above 5°c. Storage conditions: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Washing conditions: Before removing gloves, clean them properly: When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent, then with a dry cloth. When used with a solvent (thinner, etc.) : wipe with a dry cloth When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance of very high concern or substances listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: technic neoprene and natural latex gloves kpn: 420 kpn_dash: kpn_clear: 420 bkpn: MAPA 420 bkpn_clear: MAPA 420 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34420039 sr_ns: MAPA34420039.
r: 02787609 p: 7.27 pid: 100644 b: MAPA q: 36 st: 1 lt: 1 ean: 3384128500305 sr: MAPA 34850050 sr_no_br: 34850050 sr_no_br_cl: 34850050 sr_cl: MAPA34850050 sr_dash: sold: 174.48 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003 Length 265 mm Colour (manufacturer) Orange Material NBR - Nitrile-Butadiene Rubber - Nitrile Color Orange EN388 D - Puncture resistance 2 EN388 C - Tear resistance 3 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Titan 850 Protection Mechanical n: MAPA 850 titan gloves special nitrile coating grip&proof - 34850059 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Impact protection: specific areas are reinforced for cushioning protection and comfort where needed (thumb, knuckles, inside fingers and palm) Durable: long-life coating, gloves stay clean thanks to their water resistance, guaranteed flexibility after drying process Great grip thanks to our specific technology Grease and oil resistant for enhanced skin protection thanks to our specific technology Applications: Industrial maintenance Maintenance Installation of industrial equipment Assembly of heavy components Maintenance Production Assembly of heavy parts Handling thick metal sheets Handling oily mechanical parts Mechanical engineering Machining heavy parts Mechanical maintenance Metalworking Industrial equipment / metalworking Assembling heavy parts Handling heavy metal sheets Handling oily mechanical parts Mechanical engineering Mechanical maintenance Metal processing Handling heavy parts Mining / utilities / transport Maintenance Transport, logistics Handling of goods on loading floors, docks, storage, etc. Use of handling equipment Preparation of orders Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions at the workplace may differ from those tested in laboratories. Use the gloves with dry, clean hands. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity Washing conditions: Please note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: titan gloves special nitrile coating grip&proof kpn: 850 kpn_dash: kpn_clear: 850 bkpn: MAPA 850 bkpn_clear: MAPA 850 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34850050 sr_ns: MAPA34850050
r: 02260042 p: 3.43 pid: 100068 b: MAPA q: 0 st: lt: 8 ean: 3245423073164 sr: MAPA 34307016 sr_no_br: 34307016 sr_no_br_cl: 34307016 sr_cl: MAPA34307016 sr_dash: sold: 171.5 p_range: none type: combinations act: 1 avo: 1 av: Glove size 6 Standard EN 388: 2003; EN 407: 2004 Length 310 mm Colour (manufacturer) Mauve Material Latex Color Purple EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 2 Model name Jersette 307 Protection Mechanical; Heat resistance n: MAPA 307 jersetlite natural latex gloves - 34307018 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Exceptional comfort and accuracy in mildly aggressive environments Exceptional comfort thanks to precise textile base and anatomical cut Excellent dexterity and grip. Suitable for food contact Applications: Local authorities (technical maintenance) Small general maintenance jobs Local authorities (cleaning) Treatment of household detergents Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests. Persons sensitive to natural latex, dithiocarbamate or thiazole are not recommended to use these gloves. Use the gloves with dry, clean hands. Before removing the gloves, rinse them under running water. Ensure that the inside of the gloves is dry before putting them back on. Storage conditions: Store the gloves in their original packaging, out of direct sunlight, away from heat sources and electrical equipment. Washing conditions: Please note that using the gloves or cleaning or washing them in a manner not specifically recommended for them may alter their performance. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product does not contain more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: jersetlite natural latex gloves kpn: 307 kpn_dash: kpn_clear: 307 bkpn: MAPA 307 bkpn_clear: MAPA 307 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34307016 sr_ns: MAPA34307016
r: 02250655 p: 8.01 pid: 101841 b: MAPA q: 16 st: 1 lt: 1 ean: 3245428404185 sr: MAPA 34840028 sr_no_br: 34840028 sr_no_br_cl: 34840028 sr_cl: MAPA34840028 sr_dash: sold: 168.21 p_range: none type: combinations act: 1 avo: 1 av: Glove size 8 Standard EN 388: 2003; EN 407: 2004 Length 230 mm Colour (manufacturer) Blue Material Latex Color Blue EN388 D - Puncture resistance 3 EN388 C - Tear resistance 4 EN388 B - Cut resistance 5 EN388 A - Abrasion resistance 3 Model name Krytech 840 Protection Mechanical; Heat resistance n: MAPA 840 kroflex natural latex gloves - 34840020 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Ultra-high protection for handling heavy or sharp objects in humid environments Highest level of protection against cuts Good thermal insulation of the hands Good grip for safe handling of pieces thanks to relief texture Good resistance to perforation Applications: Ceramic And plastics industry Handling hot plastic parts after injection Handling composite materials after heat treatment Glass industry Handling glass sheets Construction (carpentry) Cutting wood Installation of steel structures Assembly Screwing Shoring Local authorities (waste collection and processing) Processing waste at a sorting centre Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Use the gloves with dry, clean hands. Ensure that the inside of the gloves is dry before putting them back on. Check the gloves for cuts and holes before using them. Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves or use them in the vicinity of moving machinery. Storage conditions: Store the gloves in their original packaging, protected from heat, light and humidity. Washing conditions: Please note that improper use of the gloves or cleaning or washing them by a process not specifically recommended for them may alter their performance. Legislation: This product is not classified as hazardous under Regulation (EC) No 1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1% of a substance or substances of very high concern listed in annex xvii of regulation no 1907/2006 of the european parliament and the council (reach). ds: dsc: kts: kroflex natural latex gloves kpn: 840 kpn_dash: kpn_clear: 840 bkpn: MAPA 840 bkpn_clear: MAPA 840 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34840028 sr_ns: MAPA34840028
r: 02260126 p: 2.72 pid: 100267 b: MAPA q: 0 st: lt: 8 ean: 3384123690001 sr: MAPA 34369000 sr_no_br: 34369000 sr_no_br_cl: 34369000 sr_cl: MAPA34369000 sr_dash: sold: 136 p_range: none type: combinations act: 1 avo: 1 av: Glove size 10 Standard EN 388: 2003; EN 374: 2003 Length 350 mm Colour (manufacturer) Green Material PVC Color Green EN388 D - Puncture resistance 1 EN388 C - Tear resistance 2 EN388 B - Cut resistance 1 EN388 A - Abrasion resistance 4 Model name Telsol 369 Protection Mechanical; Chemicals n: MAPA 361 telsol pvc gloves - 34369009 cn: GLOVE cn2: GLOVE cn_clear: GLOVE d: Product description: Long-term mechanical protection against low chemical hazards Longer service life: good resistance to abrasion Relief texture, offers excellent grip resistance Applications: Petrochemical industry Maintenance and handling Other sectors Cleaning and maintenance in wet environments Chemical industry Handling drums of chemical products (solvents) Instructions for use: It is recommended to check that the gloves are suitable for the intended use, as working conditions in the workplace may differ from "ce" type tests. Use the gloves with dry, clean hands. Do not use the gloves with a chemical product for longer than the measured breakthrough time. Use 2 pairs of gloves alternately if in prolonged contact with solvents. Raise the cuff to prevent hazardous chemical from dripping onto the arm. Check gloves for cuts and holes before using. Storage conditions: Store gloves in their original packaging, protected from humidity and heat. Washing conditions: Before removing gloves, clean them properly: When used with paints; pigments or inks: wipe with a damp cloth with an appropriate solvent and then with a dry cloth. When used with acids or alkaline substances: rinse the gloves thoroughly under running water and rub with a dry cloth Note: improper use of the gloves or cleaning or washing them by a process not specially recommended for them may alter their performance. Drying conditions: Ensure that the inside of the gloves is dry before putting them back on. Legislation: This product is not classified as hazardous under regulation (ec) No 1272/2008 of the european parliament and of the council. This product contains more than 0.1% diethylhexyl phthalate, according to regulation (EC) No 1907/2006 of the European Parliament and of the Council concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (reach). ds: dsc: kts: telsol pvc gloves kpn: 361 kpn_dash: kpn_clear: 361 bkpn: MAPA 361 bkpn_clear: MAPA 361 c_path: Home / Personal protective equipment, hygiene, and clothing / Personal protective equipment / Hand and arm protection / Hand protection / Glove | Home / Our brands / Mapa / Mapa personal protective equipment, hygiene, and clothing / Mapa personal protective equipment / Mapa hand and arm protection / Mapa hand protection / Mapa glove sr_no_br_cl_ns: 34369000 sr_ns: MAPA34369000
