r: 11050036 p: 9.33 pid: 155685 b: TEC7 q: 873 st: 1 lt: 1 ean: 5414195535165 sr: TEC7 535106000 sr_no_br: 535106000 sr_no_br_cl: 535106000 sr_cl: TEC7535106000 sr_dash: sold: 45894.27 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Black n: TEC7 535106000 all purpose adhesive black RAL 9004 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive black RAL 9004 in cartridge (310 ml) kpn: 535106000 kpn_dash: kpn_clear: 535106000 bkpn: TEC7 535106000 bkpn_clear: TEC7 535106000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535106000 sr_ns: TEC7535106000
r: 11050091 p: 9.33 pid: 155145 b: TEC7 q: 994 st: 1 lt: 1 ean: 5414195535264 sr: TEC7 535206000 sr_no_br: 535206000 sr_no_br_cl: 535206000 sr_cl: TEC7535206000 sr_dash: sold: 40408.23 p_range: none type: standard act: 1 avo: 1 av: Color White EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) White n: TEC7 535206000 all purpose adhesive white RAL 9016 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic types of wood and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive white RAL 9016 in cartridge (310 ml) kpn: 535206000 kpn_dash: kpn_clear: 535206000 bkpn: TEC7 535206000 bkpn_clear: TEC7 535206000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535206000 sr_ns: TEC7535206000
r: 12991057 p: 7.287 pid: 105352 b: SOUDAL q: 279 st: 1 lt: 1 ean: 5411183004023 sr: SOUDAL 105031 sr_no_br: 105031 sr_no_br_cl: 105031 sr_cl: SOUDAL105031 sr_dash: sold: 21948.444 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,6 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Repaintable Yes Colour (manufacturer) Black n: SOUDAL Fix ALL Flexi hybrid adhesive sealant black (290 ml) - 105031 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: (Fix ALL Classic is now called Fix ALL Flexi: same quality - new name) Fix All Flexi is a high quality single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: Good applicability and toolability High adhesive strength Permanent elastic after cure Paintable with waterbased paints Applications: Sealing and bonding in the building and construction industry. Sanitary and kitchen areas - resists mould growth. Structural bonding in vibrating constructions. Sealing of floor joints. Sealing and bonding of natural stone (marble, granite, ) Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All Flexi Remarks: Fix All Flexi may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility tests. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant black (290 ml) kpn: Fix ALL Flexi kpn_dash: kpn_clear: FixALLFlexi bkpn: SOUDAL Fix ALL Flexi bkpn_clear: SOUDAL FixALLFlexi c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 105031 sr_ns: SOUDAL105031
r: 11050064 p: 7.65 pid: 155142 b: TEC7 q: 546 st: 1 lt: 1 ean: 5414195535363 sr: TEC7 535306000 sr_no_br: 535306000 sr_no_br_cl: 535306000 sr_cl: TEC7535306000 sr_dash: sold: 20119.5 p_range: none type: standard act: 1 avo: 1 av: Color Grey EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Grey n: TEC7 535306000 all purpose adhesive grey RAL 7004 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all purpose adhesive grey RAL 7004 in cartridge (310 ml) kpn: 535306000 kpn_dash: kpn_clear: 535306000 bkpn: TEC7 535306000 bkpn_clear: TEC7 535306000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535306000 sr_ns: TEC7535306000
r: 11050092 p: 10.17 pid: 156324 b: TEC7 q: 776 st: 1 lt: 1 ean: 5414195539569 sr: TEC7 539506000 sr_no_br: 539506000 sr_no_br_cl: 539506000 sr_cl: TEC7539506000 sr_dash: sold: 18478.89 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Relative density 1,1 ADR packing group ADR class UN number Net volume 310 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Crystal clear n: TEC7 Trans Clear universal sealant transparent (310 ml cartridge) - 539506000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description TRANSPARENT UNIVERSAL SEALANT Also adheres to wet substrates Mould- and bacteria-resistant Super strong and permanently elastic after rapid curing Free of solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Processing temperature between +5°C and +40°C Apply on clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process For mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation Ideal adhesive thickness for optimal bonding strength: 3 mm ds: dsc: kts: universal sealant transparent (310 ml cartridge) kpn: Trans Clear kpn_dash: kpn_clear: TransClear bkpn: TEC7 Trans Clear bkpn_clear: TEC7 TransClear c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 539506000 sr_ns: TEC7539506000
r: 02335378 p: 7.738 pid: 124963 b: SOUDAL q: 1595 st: 1 lt: 1 ean: 5411183042575 sr: SOUDAL 110980 sr_no_br: 110980 sr_no_br_cl: 110980 sr_cl: SOUDAL110980 sr_dash: sold: 18114.658 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Conseils de prudence (P) P101; P102; P273; P501 Relative density 1,053 ADR packing group ADR class UN number Net volume 290 ml H-statements H412 Physical state Solid Flash point >100 °C Packaging Cartridge Repaintable Yes Colour (manufacturer) Transparent n: SOUDAL Fix ALL Crystal transparent hybrid adhesive sealant (290 ml) - 110980 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All Crystal is a crystal clear, neutral, elastic, single component sealant/adhesive based on SMX Hybrid Polymer technology. Characteristics: Completely transparant Outstanding bond strength on nearly all surfaces High performance mechanical properties Very easy to tool and finish Good extrudability even at low temperatures Ecological advantages - free of isocyanates, solvents, halogens and acids Minimal health and safety considerations Can be painted with water based paints and a number of other systems (preliminary test required) Permanently elastic after full cure Applications: All interior and exterior bonding and sealing applications Transparent and elastic bonding in many different construction and building applications Invisible bonding of glass and other transparent materials. Directions for use: Joint dimensions: - Maximum Width:1mm (connecting joints) Application: - Method: Manual- or pneumatic caulking gun - Application temperature: +5°C until +35°C Cleaning: - Fix All Cleaner immediately after application and before curing Tooling: - with soapy solution before skin formation Repair with: Fix All Crystal Remarks: Fix All Crystal may be overpainted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. Fix All Crystal can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibilty test. Not suitable for dilatation joints Do not use in applications where continuous water immersion is possible or in sanitary applications. Fix All Crystal displays very good UV stability but may discolour in extreme conditions or after many years of exposure. This product can not be used as a glazing sealant. ds: dsc: kts: transparent hybrid adhesive sealant (290 ml) kpn: Fix ALL Crystal kpn_dash: kpn_clear: FixALLCrystal bkpn: SOUDAL Fix ALL Crystal bkpn_clear: SOUDAL FixALLCrystal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 110980 sr_ns: SOUDAL110980
r: 02313572 p: 11.62 pid: 155931 b: TEC7 q: 130 st: 1 lt: 1 ean: 5414195534557 sr: TEC7 534525000 sr_no_br: 534525000 sr_no_br_cl: 534525000 sr_cl: TEC7534525000 sr_dash: sold: 15768.34 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Colour (manufacturer) White n: TEC7 X-Tack assembly and sealing sealant white in cartridge (290 ml) - 534525000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet substrates Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation. The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: assembly and sealing sealant white in cartridge (290 ml) kpn: X-Tack kpn_dash: X kpn_clear: XTack bkpn: TEC7 X-Tack bkpn_clear: TEC7 XTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 534525000 sr_ns: TEC7534525000
r: 11993375 p: 7.975 pid: 105794 b: SOUDAL q: 1535 st: 1 lt: 1 ean: 5411183030190 sr: SOUDAL 100268 sr_no_br: 100268 sr_no_br_cl: 100268 sr_cl: SOUDAL100268 sr_dash: sold: 12831.775 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) White n: SOUDAL Fix ALL High Tack hybrid adhesive sealant white (290 ml) - 100268 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant white (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100268 sr_ns: SOUDAL100268
r: 02281853 p: 7.975 pid: 124831 b: SOUDAL q: 896 st: 1 lt: 1 ean: 5411183030206 sr: SOUDAL 100270 sr_no_br: 100270 sr_no_br_cl: 100270 sr_cl: SOUDAL100270 sr_dash: sold: 12241.625 p_range: none type: standard act: 1 avo: 1 av: Color Grey Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Grey n: SOUDAL Fix ALL High Tack hybrid adhesive sealant extra strong white (290 ml) - 100270 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant extra strong white (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100270 sr_ns: SOUDAL100270
r: 02313394 p: 11.62 pid: 155170 b: TEC7 q: 38 st: 1 lt: 1 ean: 5414195530009 sr: TEC7 534535000 sr_no_br: 534535000 sr_no_br_cl: 534535000 sr_cl: TEC7534535000 sr_dash: sold: 10469.62 p_range: none type: standard act: 1 avo: 1 av: Color Grey Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Colour (manufacturer) Grey n: TEC7 X-Tack assembly and sealing sealant grey in cartridge (290 ml) - 534535000 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description EXTREME MOUNTING WITHOUT SUPPORT Extreme initial tack Vibration and impact resistant Also on wet surfaces Perfect for vertical applications Super strong before curing: 600kg/m² Stable in adhesive thicknesses up to 40 mm Permanently elastic Free of phthalates, solvents and isocyanates Safe on mirrors, no marking on natural stone Almost odourless Also on damp, smooth surfaces Mould- and bacteria-resistant Water- and airtight Can be used on most building materials Instructions Application temperature between -10°C and +40°C Apply to clean, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Apply with hand or air pistol (best with telescopic piston) Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended Test adhesion to plastics, powdered paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay When mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, so DO NOT SMOOTH DOWN When applying, position the nozzle vertically on the surface Easiest to spray with the Tec7 Multigun The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots) ds: dsc: kts: assembly and sealing sealant grey in cartridge (290 ml) kpn: X-Tack kpn_dash: X kpn_clear: XTack bkpn: TEC7 X-Tack bkpn_clear: TEC7 XTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 534535000 sr_ns: TEC7534535000
r: 02368280 p: 5.455 pid: 123511 b: SOUDAL q: 452 st: 1 lt: 1 ean: 5411183059559 sr: SOUDAL 114120 sr_no_br: 114120 sr_no_br_cl: 114120 sr_cl: SOUDAL114120 sr_dash: sold: 8547.985 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Black n: SOUDAL SoudaSeal 250 XF hybrid adhesive sealant black (290 ml) - 114120 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Soudaseal 250 XF is a high quality, single component MS polymer based adhesive sealant with a high initial tack. Characteristics: High performance mechanical properties Combines high stifness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accomodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Colour stability and UV resistance Can be painted wet-on-wet in paint trains with most industrial paints Withstands all climatic conditions Minimal health and safety considerations Applications: Structural elastic bonding in the building and metal working industry Structural bonding applications in the automotive industry (cars, coaches, caravans, marine, trains) Elastic bonding of panels, profiles and other pieces on the most common substrates Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 250 XF Remarks: Soudaseal 250 XF may be painted with most types of lacquer used in industrial applications, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase Soudaseal 250 XF can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc. may differ from manufacturer to manufacturer, we recommend a preliminary compatibility test ds: dsc: kts: hybrid adhesive sealant black (290 ml) kpn: SoudaSeal 250 XF kpn_dash: kpn_clear: SoudaSeal250XF bkpn: SOUDAL SoudaSeal 250 XF bkpn_clear: SOUDAL SoudaSeal250XF c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 114120 sr_ns: SOUDAL114120
r: 11990038 p: 7.975 pid: 106351 b: SOUDAL q: 1577 st: 1 lt: 1 ean: 5411183030220 sr: SOUDAL 100272 sr_no_br: 100272 sr_no_br_cl: 100272 sr_cl: SOUDAL100272 sr_dash: sold: 8533.25 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) Black n: SOUDAL Fix ALL High Tack hybrid adhesive sealant extra strong black (290 ml) - 100272 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: High performance mechanical properties Combines high stiffness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accommodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Good colour stability and UV resistance Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All High tack Remarks: Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant extra strong black (290 ml) kpn: Fix ALL High Tack kpn_dash: kpn_clear: FixALLHighTack bkpn: SOUDAL Fix ALL High Tack bkpn_clear: SOUDAL FixALLHighTack c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 100272 sr_ns: SOUDAL100272
r: 02335530 p: 8.206 pid: 124967 b: SOUDAL q: 2903 st: 1 lt: 1 ean: 5411183102026 sr: SOUDAL 121923 sr_no_br: 121923 sr_no_br_cl: 121923 sr_cl: SOUDAL121923 sr_dash: sold: 7853.142 p_range: none type: standard act: 1 avo: 1 av: Color White ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Flash point >100 °C Packaging Cartridge Repaintable Yes Colour (manufacturer) White n: SOUDAL Fix All Turbo hybrid adhesive sealant white (290 ml) - 121923 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix ALL Turbo is a high quality single component adhesive-sealant based on SMX-Polymer with very fast build-up of strength. Characteristics: Quickly manipulable and very fast build-up of strength Very high end-strength Good adhesion to most common substrates, even on slightly wet substrates Permanent elastic after cure Paintable with water based paints after curing Good colour stability, weather and UV resistance Applications: Bonding in the building and metal industry. Elastic bonding of panels, profiles and other pieces on most common substrates (wood, MDF,chipboard, etc). Elastic bonding in many different construction and building applications Directions for use: Method: Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15 cm. for panels). Always apply adhesive to the Edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required. The bond is manipulable after 20 min and can be loaded after 3 hours. Application temperature: +5°C until +35°C Cleaning: Fix ALL Cleaner immediately after application and before curing Tooling: with soapy solution before skin formation Repair with: Fix ALL Turbo ds: dsc: kts: hybrid adhesive sealant white (290 ml) kpn: Fix All Turbo kpn_dash: kpn_clear: FixAllTurbo bkpn: SOUDAL Fix All Turbo bkpn_clear: SOUDAL FixAllTurbo c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 121923 sr_ns: SOUDAL121923
r: 02368277 p: 5.455 pid: 121866 b: SOUDAL q: 445 st: 1 lt: 1 ean: 5411183058873 sr: SOUDAL 113890 sr_no_br: 113890 sr_no_br_cl: 113890 sr_cl: SOUDAL113890 sr_dash: sold: 6485.995 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Repaintable Yes Colour (manufacturer) White n: SOUDAL SoudaSeal 250 XF hybrid adhesive sealant white (290 ml) - 113890 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Soudaseal 250 XF is a high quality, single component MS polymer based adhesive sealant with a high initial tack. Characteristics: High performance mechanical properties Combines high stifness with very high bond strength High green strength, quick build-up of end strength, high sheer strength after full cure Does not contain isocyanates, silicone, solvent Flexible elastic rubber - movement accomodation up to 20% No bubble formation within sealant (in high temperature and humidity applications) Very easy to tool and finish Colour stability and UV resistance Can be painted wet-on-wet in paint trains with most industrial paints Withstands all climatic conditions Minimal health and safety considerations Applications: Structural elastic bonding in the building and metal working industry Structural bonding applications in the automotive industry (cars, coaches, caravans, marine, trains) Elastic bonding of panels, profiles and other pieces on the most common substrates Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 250 XF Remarks: Soudaseal 250 XF may be painted with most types of lacquer used in industrial applications, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase Soudaseal 250 XF can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc. may differ from manufacturer to manufacturer, we recommend a preliminary compatibility test ds: dsc: kts: hybrid adhesive sealant white (290 ml) kpn: SoudaSeal 250 XF kpn_dash: kpn_clear: SoudaSeal250XF bkpn: SOUDAL SoudaSeal 250 XF bkpn_clear: SOUDAL SoudaSeal250XF c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 113890 sr_ns: SOUDAL113890
r: 02552013 p: 6.03 pid: 155194 b: ZWALUW q: 35 st: 1 lt: 1 ean: 8711595028059 sr: ZWALUW 30618157 sr_no_br: 30618157 sr_no_br_cl: 30618157 sr_cl: ZWALUW30618157 sr_dash: sold: 5758.65 p_range: none type: standard act: 1 avo: 1 av: Color Black Relative density 1,58 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH208; EUH210 Physical state Solid Flash point > 60 °C Packaging Cartridge Use environment Indoor and outdoor use Repaintable Yes Colour (manufacturer) Black n: ZWALUW DEN BRAVEN HYBRIFIX sealing and mounting adhesive black (290 ml) - 30618157 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product Description: Zwaluw Hybrifix is a high quality professional universal sealant and adhesive based on hybrid technology, which cures under influence of humidity to form a durable elastic rubber. Advantages Universal bonding and sealing for interior and exterior use Permanently elastic Free of isocyanates, solvents and silicones No shrinkage and bubble free Resistant to UV, moisture, mould and weather Adheres perfectly without primer on most, even damp, surfaces Neutral curing, almost odourless Non corrosive towards metals High mechanical resistance, end strength and E-modulus Absorbs acoustic and mechanical vibrations Application: Zwaluw Hybrifix was specifically developed as a universal sealant for durable elastic sealing of connection joints and joints in pedestrian walkways in building and industry. For expansion joints Den Braven recommends Zwaluw Hybriseal Façade or Zwaluw Hybriseal 2PS. Universal construction adhesive for bonding many building materials such as: stone, concrete, glass, plasterboard, PU, PVC, hard plastics, enamel, ceramic, copper, lead, zinc, aluminium, metals, alloys, stainless steel, HPL and cement fibre panels (1), wood and paint systems. For sealing and bonding in cold storage cells and kitchens. Characteristics Shelf life Store between +5°C and +25°C and in shaded conditions. Shelf life is 18 months (exception for pressure pack shelf life is 12 months) when stored as recommended in original unopened packaging. ds: dsc: kts: sealing and mounting adhesive black (290 ml) kpn: DEN BRAVEN HYBRIFIX kpn_dash: kpn_clear: DENBRAVENHYBRIFIX bkpn: ZWALUW DEN BRAVEN HYBRIFIX bkpn_clear: ZWALUW DENBRAVENHYBRIFIX c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Zwaluw / Zwaluw technical and chemical products / Zwaluw adhesives and sealants / Zwaluw adhesives and sealants / Zwaluw ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 30618157 sr_ns: ZWALUW30618157
r: 02034235 p: 7.287 pid: 122508 b: SOUDAL q: 322 st: 1 lt: 1 ean: 5411183004177 sr: SOUDAL 105030 sr_no_br: 105030 sr_no_br_cl: 105030 sr_cl: SOUDAL105030 sr_dash: sold: 4576.236 p_range: none type: standard act: 1 avo: 1 av: Color Grey Relative density 1,6 ADR packing group ADR class UN number Net volume 290 ml EUH-statements EUH210 Physical state Solid Packaging Cartridge Use environment Indoor and outdoor use Repaintable Yes Colour (manufacturer) Grey n: SOUDAL Fix ALL Flexi hybrid adhesive sealant grey (290 ml) - 105030 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: (Fix ALL Classic is now called Fix ALL Flexi: same quality - new name) Fix All Flexi is a high quality single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology. Characteristics: Good applicability and toolability High adhesive strength Permanent elastic after cure Paintable with waterbased paints Applications: Sealing and bonding in the building and construction industry. Sanitary and kitchen areas - resists mould growth. Structural bonding in vibrating constructions. Sealing of floor joints. Sealing and bonding of natural stone (marble, granite, ) Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints) Recommendation: width of joint = 2x depth of joint Application Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix All Cleaner immediately after application and before Curing Tooling: with soapy solution before skin formation Repair with: Fix All Flexi Remarks: Fix All Flexi may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility tests. This product can not be used as a glazing sealant. ds: dsc: kts: hybrid adhesive sealant grey (290 ml) kpn: Fix ALL Flexi kpn_dash: kpn_clear: FixALLFlexi bkpn: SOUDAL Fix ALL Flexi bkpn_clear: SOUDAL FixALLFlexi c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 105030 sr_ns: SOUDAL105030
r: 02058170 p: 7.832 pid: 124809 b: SOUDAL q: 10 st: 1 lt: 1 ean: 5411183047679 sr: SOUDAL 112302 sr_no_br: 112302 sr_no_br_cl: 112302 sr_cl: SOUDAL112302 sr_dash: sold: 3728.032 p_range: none type: standard act: 1 avo: 1 av: Color White Relative density 1,6 ADR packing group ADR class Net volume 290 ml EUH-statements EUH210 UN number Physical state Solid Packaging Cartridge Colour (manufacturer) White n: SOUDAL SoudaSeal CleanRoom hybrid joint sealant (290 ml) - 112302 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Soudaseal Cleanroom is a high quality single component joint sealant with high adhesive strength. It is based on MS-Polymer, chemically neutral and fully elastic. For use as sealant/adhesive in construction and cleanroom applications where a tough flexible rubber is required. Characteristics: Outstanding bond strength on nearly all surfaces High performance mechanical properties Flexible elastic rubber - movement accomodation up to ± 20% Straightforward application even in adverse conditions No bubble formation withing sealant (in high temperature and humidity applications) Very easy to too and finish Good extrudability even at low temperatures Colour stable and UV-resistant Ecological advantages - free of isocyanates,solvents, halogens and acids Minimal health and safety considerations Can be painted with all water based paints No staining of porous materials such as naturalstone, granite, marble, etc. Applications: Sealing and bonding in cleanroom applicationsSealing and bonding in the building industrySanitary applicationsStructural bonding in vibrating constructionsSealing of floor joints Directions for use: Method: Manual or pneumatic caulcing gun Appication temperature: +5°C until +35°C Cleaning: White Spirit of Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal Cleanroom Remarks: Soudaseal Cleanroom may be overpainted with waterbased paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before appication. Soudaseal Cleanroom can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc. may differ from manufacturer, we recommend preliminary compatibility test. ds: dsc: kts: hybrid joint sealant (290 ml) kpn: SoudaSeal CleanRoom kpn_dash: kpn_clear: SoudaSealCleanRoom bkpn: SOUDAL SoudaSeal CleanRoom bkpn_clear: SOUDAL SoudaSealCleanRoom c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 112302 sr_ns: SOUDAL112302
r: 02705307 p: 8.766 pid: 121857 b: SOUDAL q: 281 st: 1 lt: 1 ean: 5411183133464 sr: SOUDAL 130276 sr_no_br: 130276 sr_no_br_cl: 130276 sr_cl: SOUDAL130276 sr_dash: sold: 3585.294 p_range: none type: standard act: 1 avo: 1 av: Color Colourless Conseils de prudence (P) P101; P102; P273; P280; P302 + P352; P333 + P313; P362 + P364; P501 Relative density 1,4 ADR packing group ADR class UN number Net volume 290 ml Principal hazard property GHS07 Harmful or irritant H-statements H317; H412 Hazard class GHS07 Harmful or irritant Physical state Solid Flash point >100 °C Packaging Cartridge Repaintable Yes Colour (manufacturer) Transparent n: SOUDAL Fix ALL High Tack Clear hybrid adhesive sealant extra strong transparent (290 ml) - 130276 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description: Fix All High Tack Invisible is a high quality, single component joint sealant with high adhesive strength and cures completely Invisible. It is based on SMX Hybrid Polymer technology. Characteristics: High initial tack reducing the need for initial support. Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer) Easy to apply and easy to tool and finish Remains elastic after curing No odour Does not contain isocyanates, silicones nor solvents Paintable with all water based paints Good colour stability, weather and UV resistance Good adhesion on wet substrates Applications: Sealing and bonding in the building and construction industry. Structural bonding in vibrating constructions. Directions for use: Joint dimensions: Minimal width: 2mm (bonding) 5mm (joints) Maximal width: 10mm (bonding) 30mm (joints) Minimum depth: 5mm (joints Recommendation: width of joint = 2x depth of joint Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Cleaning: Fix ALL Cleaner immediately after application and before curing Tooling: with soapy solution before skin formation Repair with: Fix ALL High tack Remarks: Fix ALL High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Fix ALL High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests. While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended. This product can not be used as a glazing sealant. Fix ALL High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL High Tack can therefore only be used on the bottom of natural stone tiles. When applying, make sure not to spill any sealant on the surface of materials. ds: dsc: kts: hybrid adhesive sealant extra strong transparent (290 ml) kpn: Fix ALL High Tack Clear kpn_dash: kpn_clear: FixALLHighTackClear bkpn: SOUDAL Fix ALL High Tack Clear bkpn_clear: SOUDAL FixALLHighTackClear c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 130276 sr_ns: SOUDAL130276
r: 02700208 p: 8.207 pid: 122101 b: SOUDAL q: 876 st: 1 lt: 1 ean: 5411183120082 sr: SOUDAL 124806 sr_no_br: 124806 sr_no_br_cl: 124806 sr_cl: SOUDAL124806 sr_dash: sold: 3496.182 p_range: none type: standard act: 1 avo: 1 av: Color Black EUH-statements EUH210 ADR packing group ADR class Net volume 290 ml UN number Physical state Solid Flash point >100 °C Packaging Cartridge n: SOUDAL Fix ALL Turbo hybrid adhesive sealant black (290 ml) - 124806 cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: ds: dsc: kts: hybrid adhesive sealant black (290 ml) kpn: Fix ALL Turbo kpn_dash: kpn_clear: FixALLTurbo bkpn: SOUDAL Fix ALL Turbo bkpn_clear: SOUDAL FixALLTurbo c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 124806 sr_ns: SOUDAL124806
r: 11990108 p: 9.33 pid: 156337 b: TEC7 q: 7 st: 1 lt: 1 ean: 5414195535967 sr: TEC7 535906000 sr_no_br: 535906000 sr_no_br_cl: 535906000 sr_cl: TEC7535906000 sr_dash: sold: 3172.2 p_range: none type: standard act: 1 avo: 1 av: Color Beige EUH-statements EUH208 Relative density 1,62 ADR packing group ADR class UN number Net volume 310 ml Physical state Solid Packaging Cartridge Colour (manufacturer) Beige n: TEC7 535906000 all-purpose adhesive beige RAL 1015 in cartridge (310 ml) cn: MS POLYMER cn2: MS POLYMER cn_clear: MSPOLYMER d: Product description SEAL, BOND AND ASSEMBLE EVERYTHING Unique adhesion to almost all materials Very high bonding strength Fast strength build-up Cures up to -10°C Highest class in mould resistance Unique adhesion on difficult materials On dry and wet substrates Permanently elastic over the long term Highly UV-resistant and colourfast for indoor and outdoor use Safe on mirrors and insulation materials, no marking on natural stone Free of isocyanates, solvents and phthalates Water- and airtight Instructions Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed Apply on clean, stable, dust- and grease-free substrates Use Tec7 Prepare & Finish for safe cleaning and a perfect finish In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean Test the adhesion on plastics, powder paints, exotic woods and bituminous materials Reinforce weak and/or porous substrates first with Poxy Primer PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings Tec7 cures through a reaction with (air) moisture Use Tec7 in lines, not in thick dots. Dots will cure much more slowly When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly Use vertical glue strips to avoid moisture and dust accumulation Ideal adhesive thickness: 0.5 mm to 3 mm Thinner layers = higher strength, Thicker layers = higher elasticity Paintable after skin formation Do not use with alkyd-based lacquers and paints Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it. ds: dsc: kts: all-purpose adhesive beige RAL 1015 in cartridge (310 ml) kpn: 535906000 kpn_dash: kpn_clear: 535906000 bkpn: TEC7 535906000 bkpn_clear: TEC7 535906000 c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Ms polymer | Home / Our brands / Tec7 / Tec7 technical and chemical products / Tec7 adhesives and sealants / Tec7 adhesives and sealants / Tec7 ms polymer | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Ms polymer sr_no_br_cl_ns: 535906000 sr_ns: TEC7535906000
