r: 08078355 p: 26.47 pid: 63910 b: PFERD q: 0 st: lt: 8 ean: 4007220416280 sr: PFERD 45005637 sr_no_br: 45005637 sr_no_br_cl: 45005637 sr_cl: PFERD45005637 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 50 mm Length 2000 mm Grit size 36 n: PFERD 45005637 grinding belt VICTOGRAIN-COOL BA 50x2000 mm A 36 for extremely high material removal with belt grinders cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD VICTOGRAIN-COOL abrasive belt BA 50x2000 mm A 36 for extremely high stock removal with a belt grinder Characteristics For maximum aggressive grinding with an extremely long tool life and an outstanding stock removal rate on steels and materials which are hard or have poor heat-conducting properties Outstanding, constant high performance thanks to the VICTOGRAIN abrasive grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding VICTOGRAIN products are some of the most effective grinding tools in the world The triangular, precision-formed abrasive grain from PFERD helps provide a uniquely high level of abrasive performance The VICTOGRAIN abrasive grit triangles are identical in shape and size and their cutting edges are applied to the workpiece at the optimum angle, meaning the grit needs very little energy to penetrate the workpiece The user thus benefits from an efficient machining process with fast work progress, a long tool life, a reduced influx of heat into the workpiece and a lower power output required for the tool drive ;The VICTOGRAIN abrasive triangles are fixed to the substrate on one of their sides This means they are securely fixed in place and, together with their slim design, offer an extremely large chip space in order to further improve machining efficiency The structure of the triangular VICTOGRAIN has also been specially adapted to maximize results The very small crystals inside the triangles ensure optimal wear characteristics as sharp cutting edges are always exposed, but only the minimum amount of abrasive grain/the triangle breaks off By combining all these properties together, users benefit from the ultimate, constant performance during cool grinding and an extremely long tool life together with consistent workpiece surface roughness Advantages: Efficient machining process with fast work progress, long tool life, less heat build-up in the workpiece, and a lower power output required for the tool drive thanks to VICTOGRAIN abrasive grain. High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: grinding belt VICTOGRAIN-COOL BA 50x2000 mm A 36 for extremely high material removal with belt grinders kpn: 45005637 kpn_dash: kpn_clear: 45005637 bkpn: PFERD 45005637 bkpn_clear: PFERD 45005637 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt sr_no_br_cl_ns: 45005637 sr_ns: PFERD45005637
r: 03164340 p: 26.4 pid: 70580 b: PFERD q: 0 st: lt: 8 ean: 4007220955024 sr: PFERD 43303070 sr_no_br: 43303070 sr_no_br_cl: 43303070 sr_cl: PFERD43303070 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 12512/22,2 CT ST 0,50 COMBITWIST round brush twisted RBG Ø 125 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder - 43303070 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 125x12x22.2 mm steel wire dia. 0.50 mm angle grinders (10) Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 125 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder kpn: 12512/22,2 CT ST 0,50 kpn_dash: kpn_clear: 12512222CTST050 bkpn: PFERD 12512/22,2 CT ST 0,50 bkpn_clear: PFERD 12512222CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43303070 sr_ns: PFERD43303070
r: 08077704 p: 26.37 pid: 34510 b: PFERD q: 0 st: lt: 8 ean: 4007220936603 sr: PFERD 43208021 sr_no_br: 43208021 sr_no_br_cl: 43208021 sr_cl: PFERD43208021 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 23 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted Yes Height 68 mm Connection size (machine) 6 mm n: PFERD PBG 2323/6 ST 0,25 brush twisted Ø 23 mm pin-Ø 6 mm steel wire-Ø 0.25 - 43208021 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush knotted PBG dia. 23 mm shank dia. 6 mm steel wire dia. 0.25 Characteristics Aggressive brush Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Optimal access to hard-to-reach areas such as recesses and drilled holes. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: brush twisted Ø 23 mm pin-Ø 6 mm steel wire-Ø 0.25 kpn: PBG 2323/6 ST 0,25 kpn_dash: kpn_clear: PBG23236ST025 bkpn: PFERD PBG 2323/6 ST 0,25 bkpn_clear: PFERD PBG23236ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush sr_no_br_cl_ns: 43208021 sr_ns: PFERD43208021
r: 08079725 p: 26.36 pid: 67069 b: PFERD q: 0 st: lt: 8 ean: 4007220936139 sr: PFERD 44371115 sr_no_br: 44371115 sr_no_br_cl: 44371115 sr_cl: PFERD44371115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Thickness 22 mm n: PFERD 44371115 hard felt flap disc FFS 115mm bore 22,23mm for polishing work with angle grinder cn: POLISHING DISC cn2: POLISHING DISC cn_clear: POLISHINGDISC d: Product description PFERD Hard felt flap disc FFS dia. 115 mm hole 22.23 for polishing work with an angle grinder Characteristics Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained As a general rule, diamond polishing pastes and polishing paste bars are used for this Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. Low thermal load on the workpiece. ds: dsc: kts: hard felt flap disc FFS 115mm bore 22,23mm for polishing work with angle grinder kpn: 44371115 kpn_dash: kpn_clear: 44371115 bkpn: PFERD 44371115 bkpn_clear: PFERD 44371115 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing disc sr_no_br_cl_ns: 44371115 sr_ns: PFERD44371115
r: 08079726 p: 26.36 pid: 67935 b: PFERD q: 0 st: lt: 8 ean: 4007220936085 sr: PFERD 44370115 sr_no_br: 44370115 sr_no_br_cl: 44370115 sr_cl: PFERD44370115 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm Thickness 22 mm n: PFERD 44370115 soft felt flap disc FFS 115mm bore 22,23 for polishing work with angle grinder cn: POLISHING DISC cn2: POLISHING DISC cn_clear: POLISHINGDISC d: Product description PFERD soft felt flap disc FFS dia. 115 mm hole 22.23 for polishing work with an angle grinder Characteristics Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained As a general rule, diamond polishing pastes and polishing paste bars are used for this Advantages: Highly flexible, enabling optimal adjustment to the contour. Can be profiled as desired, meaning they can also be used for tools with complex geometries. Low thermal load on the workpiece. ds: dsc: kts: soft felt flap disc FFS 115mm bore 22,23 for polishing work with angle grinder kpn: 44370115 kpn_dash: kpn_clear: 44370115 bkpn: PFERD 44370115 bkpn_clear: PFERD 44370115 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing disc sr_no_br_cl_ns: 44370115 sr_ns: PFERD44370115
r: 04023340 p: 26.31 pid: 38476 b: PFERD q: 0 st: lt: 8 ean: 4007220806630 sr: PFERD 43104053 sr_no_br: 43104053 sr_no_br_cl: 43104053 sr_cl: PFERD43104053 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Thickness 4 mm Max. no-load speed 15000 rpm Connection size (machine) 6 mm n: PFERD 7004/6 INOX 0,20 round brush unturned RBU Ø 70 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43104053 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 70x4 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 70 x 4 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: 7004/6 INOX 0,20 kpn_dash: kpn_clear: 70046INOX020 bkpn: PFERD 7004/6 INOX 0,20 bkpn_clear: PFERD 70046INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43104053 sr_ns: PFERD43104053
r: 03206572 p: 26.15 pid: 32426 b: PFERD q: 0 st: lt: 8 ean: 4007220023716 sr: PFERD 47802825 sr_no_br: 47802825 sr_no_br_cl: 47802825 sr_cl: PFERD47802825 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 240 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 A 240 flap wheel for angle grinder 125x20 mm, grain 240 universal application - 47802825 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 A240 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 240 universal application kpn: FR WS 12520 5/8-11 A 240 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811A240 bkpn: PFERD FR WS 12520 5/8-11 A 240 bkpn_clear: PFERD FRWS125205811A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 47802825 sr_ns: PFERD47802825
r: 03206574 p: 26.15 pid: 33963 b: PFERD q: 0 st: lt: 8 ean: 4007220023723 sr: PFERD 47802826 sr_no_br: 47802826 sr_no_br_cl: 47802826 sr_cl: PFERD47802826 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 320 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 A 320 flap wheel for angle grinder 125x20 mm, 320 grit universal application - 47802826 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, 320 grit universal application kpn: FR WS 12520 5/8-11 A 320 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811A320 bkpn: PFERD FR WS 12520 5/8-11 A 320 bkpn_clear: PFERD FRWS125205811A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 47802826 sr_ns: PFERD47802826
r: 03206525 p: 26.15 pid: 32326 b: PFERD q: 0 st: lt: 8 ean: 4007220023662 sr: PFERD 44782532 sr_no_br: 44782532 sr_no_br_cl: 44782532 sr_cl: PFERD44782532 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 320 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 20 mm n: PFERD FR WS 12520 M14 A 320 flap wheel for angle grinder 125x20 mm, 320 grit universal application - 44782532 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm M14 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, 320 grit universal application kpn: FR WS 12520 M14 A 320 kpn_dash: kpn_clear: FRWS12520M14A320 bkpn: PFERD FR WS 12520 M14 A 320 bkpn_clear: PFERD FRWS12520M14A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44782532 sr_ns: PFERD44782532
r: 03160854 p: 26.15 pid: 69382 b: PFERD q: 0 st: lt: 5 ean: 4007220579114 sr: PFERD 43211003 sr_no_br: 43211003 sr_no_br_cl: 43211003 sr_cl: PFERD43211003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Height 85 mm Connection size (machine) 6 mm n: PFERD TBU 6015/6 INOX 0,30 cup brush unturned Ø 60 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43211003 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Cup brush crimped TBU dia. 60 mm shank dia. 6 mm stainless steel wire dia. 0.30 Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Cup brush with plastic-covered brush body Advantages: Low risk of contaminating the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 60 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: TBU 6015/6 INOX 0,30 kpn_dash: kpn_clear: TBU60156INOX030 bkpn: PFERD TBU 6015/6 INOX 0,30 bkpn_clear: PFERD TBU60156INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush sr_no_br_cl_ns: 43211003 sr_ns: PFERD43211003
r: 04023553 p: 26.1 pid: 38933 b: PFERD q: 0 st: lt: 8 ean: 4007220806715 sr: PFERD 43306061 sr_no_br: 43306061 sr_no_br_cl: 43306061 sr_cl: PFERD43306061 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43306061 COMBITWIST bowl brush knotted TBG Ø 80 mm M14 steel wire dia. 0.50 mm angle grinder cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD COMBITWIST cup brush knotted TBG dia. 80mm M14 steel wire dia. 0.50mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST bowl brush knotted TBG Ø 80 mm M14 steel wire dia. 0.50 mm angle grinder kpn: 43306061 kpn_dash: kpn_clear: 43306061 bkpn: PFERD 43306061 bkpn_clear: PFERD 43306061 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush sr_no_br_cl_ns: 43306061 sr_ns: PFERD43306061
r: 08077600 p: 26.09 pid: 34152 b: PFERD q: 0 st: lt: 8 ean: 4007220025710 sr: PFERD 44781808 sr_no_br: 44781808 sr_no_br_cl: 44781808 sr_cl: PFERD44781808 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 80 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 11520 5/8-11 CO-COOL 80 flap wheel for angle grinder 115x20 mm, grain 80 for stainless steel - 44781808 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm 5/8-11 CO-COOL80 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, grain 80 for stainless steel kpn: FR WS 11520 5/8-11 CO-COOL 80 kpn_dash: FR WS 11520 5/8 kpn_clear: FRWS115205811COCOOL80 bkpn: PFERD FR WS 11520 5/8-11 CO-COOL 80 bkpn_clear: PFERD FRWS115205811COCOOL80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44781808 sr_ns: PFERD44781808
r: 08077601 p: 26.09 pid: 32726 b: PFERD q: 0 st: lt: 8 ean: 4007220025727 sr: PFERD 44781812 sr_no_br: 44781812 sr_no_br_cl: 44781812 sr_cl: PFERD44781812 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 120 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 11520 5/8-11 CO-COOL 120 flap wheel for angle grinder 115x20 mm, grain 120 for stainless steel - 44781812 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm 5/8-11 CO-COOL120 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, grain 120 for stainless steel kpn: FR WS 11520 5/8-11 CO-COOL 120 kpn_dash: FR WS 11520 5/8 kpn_clear: FRWS115205811COCOOL120 bkpn: PFERD FR WS 11520 5/8-11 CO-COOL 120 bkpn_clear: PFERD FRWS115205811COCOOL120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44781812 sr_ns: PFERD44781812
r: 08079146 p: 25.99 pid: 34734 b: PFERD q: 0 st: lt: 8 ean: 4007220895726 sr: PFERD 44691629 sr_no_br: 44691629 sr_no_br_cl: 44691629 sr_cl: PFERD44691629 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Bore size 25,4 mm Width 3 mm Grit size Fine n: PFERD 44691629 POLINOX pressed fleece wheel PNER Ø 150x3 mm bore-diameter 25.4 mm medium-hard SIC fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 150x3 mm centre hole dia. 25.4 mm medium-hard SIC fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations Medium-hard version with increased edge strength and tool life for coarse deburring and cleaning applications Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 150x3 mm bore-diameter 25.4 mm medium-hard SIC fine for finishing kpn: 44691629 kpn_dash: kpn_clear: 44691629 bkpn: PFERD 44691629 bkpn_clear: PFERD 44691629 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel sr_no_br_cl_ns: 44691629 sr_ns: PFERD44691629
r: 08077607 p: 25.97 pid: 33049 b: PFERD q: 0 st: lt: 8 ean: 4007220025741 sr: PFERD 44782806 sr_no_br: 44782806 sr_no_br_cl: 44782806 sr_cl: PFERD44782806 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 60 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 CO-COOL 60 flap wheel for angle grinder 125x20 mm, grain 60 for stainless steel - 44782806 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 CO-COOL60 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 60 for stainless steel kpn: FR WS 12520 5/8-11 CO-COOL 60 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811COCOOL60 bkpn: PFERD FR WS 12520 5/8-11 CO-COOL 60 bkpn_clear: PFERD FRWS125205811COCOOL60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44782806 sr_ns: PFERD44782806
r: 03161373 p: 25.97 pid: 33887 b: PFERD q: 0 st: lt: 8 ean: 4007220025628 sr: PFERD 44782604 sr_no_br: 44782604 sr_no_br_cl: 44782604 sr_cl: PFERD44782604 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 40 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 20 mm n: PFERD FR WS 12520 M14 CO-COOL 40 flap wheel for angle grinder 125x20 mm, grain 40 for stainless steel - 44782604 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm M14 CO-COOL40 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 40 for stainless steel kpn: FR WS 12520 M14 CO-COOL 40 kpn_dash: FR WS 12520 M14 CO kpn_clear: FRWS12520M14COCOOL40 bkpn: PFERD FR WS 12520 M14 CO-COOL 40 bkpn_clear: PFERD FRWS12520M14COCOOL40 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44782604 sr_ns: PFERD44782604
r: 08077610 p: 25.97 pid: 34164 b: PFERD q: 0 st: lt: 8 ean: 4007220025666 sr: PFERD 44782606 sr_no_br: 44782606 sr_no_br_cl: 44782606 sr_cl: PFERD44782606 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 60 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 20 mm n: PFERD FR WS 12520 M14 CO-COOL 60 flap wheel for angle grinder 125x20 mm, grain 60 for stainless steel - 44782606 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm M14 CO-COOL60 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 60 for stainless steel kpn: FR WS 12520 M14 CO-COOL 60 kpn_dash: FR WS 12520 M14 CO kpn_clear: FRWS12520M14COCOOL60 bkpn: PFERD FR WS 12520 M14 CO-COOL 60 bkpn_clear: PFERD FRWS12520M14COCOOL60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44782606 sr_ns: PFERD44782606
r: 08077606 p: 25.97 pid: 34156 b: PFERD q: 0 st: lt: 8 ean: 4007220025734 sr: PFERD 44782804 sr_no_br: 44782804 sr_no_br_cl: 44782804 sr_cl: PFERD44782804 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 125 mm Grit size 40 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 12520 5/8-11 CO-COOL 40 flap wheel for angle grinder 125x20 mm, grain 40 for stainless steel - 44782804 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 125x20mm 5/8-11 CO-COOL40 for stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 125x20 mm, grain 40 for stainless steel kpn: FR WS 12520 5/8-11 CO-COOL 40 kpn_dash: FR WS 12520 5/8 kpn_clear: FRWS125205811COCOOL40 bkpn: PFERD FR WS 12520 5/8-11 CO-COOL 40 bkpn_clear: PFERD FRWS125205811COCOOL40 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44782804 sr_ns: PFERD44782804
r: 03164243 p: 25.89 pid: 69462 b: PFERD q: 0 st: lt: 8 ean: 4007220658697 sr: PFERD 43107013 sr_no_br: 43107013 sr_no_br_cl: 43107013 sr_cl: PFERD43107013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 76 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 12 mm Max. no-load speed 25000 rpm Connection size (machine) 6 mm n: PFERD 7012/6 INOX 0,35 round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43107013 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 76x12 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: 7012/6 INOX 0,35 kpn_dash: kpn_clear: 70126INOX035 bkpn: PFERD 7012/6 INOX 0,35 bkpn_clear: PFERD 70126INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43107013 sr_ns: PFERD43107013
