r: 08079136 p: 25.4 pid: 34178 b: PFERD q: 0 st: lt: 8 ean: 4007220833162 sr: PFERD 44691052 sr_no_br: 44691052 sr_no_br_cl: 44691052 sr_cl: PFERD44691052 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 125 mm Bore size 22,2 mm Width 6 mm Grit size Fine n: PFERD 44691052 POLINOX pressed fleece wheel PNER Ø 125x6 mm bore diameter 22.23 mm hard A fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 125x6 mm centre hole dia. 22.23 mm hard A fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations Hard version with very high stock removal rate, good edge strength and long tool life for tough deburring and polishing applications Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 125x6 mm bore diameter 22.23 mm hard A fine for finishing kpn: 44691052 kpn_dash: kpn_clear: 44691052 bkpn: PFERD 44691052 bkpn_clear: PFERD 44691052 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel sr_no_br_cl_ns: 44691052 sr_ns: PFERD44691052
r: 02808601 p: 25.39 pid: 69190 b: PFERD q: 0 st: lt: 8 ean: 4007220894637 sr: PFERD 43701020 sr_no_br: 43701020 sr_no_br_cl: 43701020 sr_cl: PFERD43701020 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Connection size (machine) 6 mm n: PFERD 10010/6 INOX 0,30 POS round brush unturned RBU Ø 100 x 10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43701020 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POS wheel brush crimped RBU dia. 100x10 mm shank dia. 6 mm stainless steel wire dia. 0.30 (10) Characteristics Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: POS round brush unturned RBU Ø 100 x 10 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: 10010/6 INOX 0,30 kpn_dash: kpn_clear: 100106INOX030 bkpn: PFERD 10010/6 INOX 0,30 bkpn_clear: PFERD 100106INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43701020 sr_ns: PFERD43701020
r: 08079150 p: 25.39 pid: 40903 b: PFERD q: 0 st: lt: 8 ean: 4007220895740 sr: PFERD 44691631 sr_no_br: 44691631 sr_no_br_cl: 44691631 sr_cl: PFERD44691631 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Bore size 25,4 mm Width 6 mm Grit size Fine n: PFERD 44691631 POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-Ø 25.4 mm soft SIC fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 150x6 mm centre hole dia. 25.4 mm soft SIC fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for angle grinders and fillet weld grinders is particularly suitable for working on fillet welds and hard-to-reach slots and indentations Soft version with excellent adaptability The durability, grinding performance and very high surface quality are maintained at the same time Very well-suited to work on contours Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 150x6 mm bore-Ø 25.4 mm soft SIC fine for finishing kpn: 44691631 kpn_dash: kpn_clear: 44691631 bkpn: PFERD 44691631 bkpn_clear: PFERD 44691631 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel sr_no_br_cl_ns: 44691631 sr_ns: PFERD44691631
r: 04023363 p: 25.33 pid: 38500 b: PFERD q: 0 st: lt: 8 ean: 4007220659472 sr: PFERD 43107014 sr_no_br: 43107014 sr_no_br_cl: 43107014 sr_cl: PFERD43107014 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 76 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 25000 rpm Connection size (machine) 6 mm n: PFERD 7012/6 INOX 0,50 round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 - 43107014 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 76x12 mm shank dia. 6 mm stainless steel wire dia. 0.50 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 76 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 kpn: 7012/6 INOX 0,50 kpn_dash: kpn_clear: 70126INOX050 bkpn: PFERD 7012/6 INOX 0,50 bkpn_clear: PFERD 70126INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43107014 sr_ns: PFERD43107014
r: 08078419 p: 25.31 pid: 65623 b: PFERD q: 0 st: lt: 8 ean: 4007220950760 sr: PFERD 45005815 sr_no_br: 45005815 sr_no_br_cl: 45005815 sr_cl: PFERD45005815 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 75 mm Length 2500 mm Grit size 24 n: PFERD 45005815 Ceramic grit grinding belt BA 75x2500 mm CO24 highest efficiency on steel with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD ceramic oxide grain abrasive belt BA 75x2500mm CO24 for maximum stock removal on steel with a belt grinder Characteristics For aggressive grinding with maximum stock removal rate and very good tool life Consistently high performance due to self-sharpening ceramic oxide grain The ceramic oxide grain is specifically designed for work on hard materials and layers Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: Ceramic grit grinding belt BA 75x2500 mm CO24 highest efficiency on steel with belt grinder kpn: 45005815 kpn_dash: kpn_clear: 45005815 bkpn: PFERD 45005815 bkpn_clear: PFERD 45005815 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt sr_no_br_cl_ns: 45005815 sr_ns: PFERD45005815
r: 03164226 p: 25.12 pid: 71271 b: PFERD q: 0 st: lt: 6 ean: 4007220220641 sr: PFERD 43107003 sr_no_br: 43107003 sr_no_br_cl: 43107003 sr_cl: PFERD43107003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 76 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 6 mm Max. no-load speed 25000 rpm Connection size (machine) 6 mm n: PFERD 7006/6 INOX 0,35 round brush twisted RBG Ø 76 x 6 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43107003 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 76x6 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 76 x 6 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: 7006/6 INOX 0,35 kpn_dash: kpn_clear: 70066INOX035 bkpn: PFERD 7006/6 INOX 0,35 bkpn_clear: PFERD 70066INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43107003 sr_ns: PFERD43107003
r: 08078584 p: 24.94 pid: 68095 b: PFERD q: 0 st: lt: 8 ean: 4007220936023 sr: PFERD 42002182 sr_no_br: 42002182 sr_no_br_cl: 42002182 sr_cl: PFERD42002182 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 115 mm (Disc) attachment Combiclick Bore size Perforated No For material Steel; Stainless steel; Non-ferrous metal Grit size Fine n: PFERD 42002182 COMBICLICK pressed fleece disc CC PNER Ø 115 mm hard A, fine for finish cn: SANDING DISC cn2: SANDING DISC cn_clear: SANDINGDISC d: Product description PFERD COMBICLICK pressed non-woven disc CC PNER dia. 115 mm hard A fine for finishing Characteristics The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool With the backing pad, COMBICLICK tools can be used on commercially available angle grinders The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing Especially suitable for work on larger surfaces on components made of stainless steel (INOX) Advantages: The innovative quick-mounting system ensures convenient handling and cool grinding. Extremely quick and easy tool changes, which reduces process costs. Using COMBICLICK helps to avoid scratches caused by protruding clamping pieces, and exploits the abrasive material that is available. High edge strength thanks to extreme durability. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: COMBICLICK pressed fleece disc CC PNER Ø 115 mm hard A, fine for finish kpn: 42002182 kpn_dash: kpn_clear: 42002182 bkpn: PFERD 42002182 bkpn_clear: PFERD 42002182 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding disc sr_no_br_cl_ns: 42002182 sr_ns: PFERD42002182
r: 08078004 p: 24.87 pid: 35576 b: PFERD q: 0 st: lt: 8 ean: 4007220593356 sr: PFERD 43312011 sr_no_br: 43312011 sr_no_br_cl: 43312011 sr_cl: PFERD43312011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 11512/22,2 CT ST 0,50 COMBITWIST round brush knotted RBG Ø 115 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder - 43312011 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 115x12x22.2 mm steel wire dia. 0.50 mm angle grinders Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush knotted RBG Ø 115 x 12 x 22.2 mm steel wire-Ø 0.50 mm angle grinder kpn: 11512/22,2 CT ST 0,50 kpn_dash: kpn_clear: 11512222CTST050 bkpn: PFERD 11512/22,2 CT ST 0,50 bkpn_clear: PFERD 11512222CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43312011 sr_ns: PFERD43312011
r: 04023551 p: 24.85 pid: 40419 b: PFERD q: 0 st: lt: 8 ean: 4007220806654 sr: PFERD 43306031 sr_no_br: 43306031 sr_no_br_cl: 43306031 sr_cl: PFERD43306031 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43306031 cup brush knotted TBG Ø 80 mm M14 steel wire dia. 0.50 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD cup brush knotted TBG dia. 80mm M14 steel wire dia. 0.50mm angle grinders (1) Characteristics Aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: cup brush knotted TBG Ø 80 mm M14 steel wire dia. 0.50 mm angle grinders kpn: 43306031 kpn_dash: kpn_clear: 43306031 bkpn: PFERD 43306031 bkpn_clear: PFERD 43306031 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush sr_no_br_cl_ns: 43306031 sr_ns: PFERD43306031
r: 03067503 p: 24.85 pid: 69352 b: PFERD q: 0 st: lt: 8 ean: 4007220806791 sr: PFERD 43503001 sr_no_br: 43503001 sr_no_br_cl: 43503001 sr_cl: PFERD43503001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 8000 rpm Connection size (machine) 14 mm n: PFERD 12512/14,0 ST 0,30 Wheel brush narrow untied RBU Ø 125 x 12 x 14 mm arbor hole steel wire-Ø 0.30 - 43503001 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush slim crimped RBU dia. 125x12x14 mm hole steel wire dia. 0.30 Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: Wheel brush narrow untied RBU Ø 125 x 12 x 14 mm arbor hole steel wire-Ø 0.30 kpn: 12512/14,0 ST 0,30 kpn_dash: kpn_clear: 12512140ST030 bkpn: PFERD 12512/14,0 ST 0,30 bkpn_clear: PFERD 12512140ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush sr_no_br_cl_ns: 43503001 sr_ns: PFERD43503001
r: 02795963 p: 24.84 pid: 32254 b: PFERD q: 0 st: lt: 8 ean: 4007220936252 sr: PFERD 44388051 sr_no_br: 44388051 sr_no_br_cl: 44388051 sr_cl: PFERD44388051 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 80 mm Height 50 mm n: PFERD 44388051 hard felt pad FLS Ø 80x50 mm shank dia. 6 mm for universal polishing work cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD Hard mounted felt flap wheels FLS dia. 80x50 mm shank dia. 6 mm for general polishing work Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained Mounted felt flap wheels are used for pre-polishing and high-gloss polishing on small to medium-sized components Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. Low thermal load on the workpiece. ds: dsc: kts: hard felt pad FLS Ø 80x50 mm shank dia. 6 mm for universal polishing work kpn: 44388051 kpn_dash: kpn_clear: 44388051 bkpn: PFERD 44388051 bkpn_clear: PFERD 44388051 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point sr_no_br_cl_ns: 44388051 sr_ns: PFERD44388051
r: 02770755 p: 24.84 pid: 32948 b: PFERD q: 0 st: lt: 8 ean: 4007220936245 sr: PFERD 44388050 sr_no_br: 44388050 sr_no_br_cl: 44388050 sr_cl: PFERD44388050 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 80 mm Height 50 mm n: PFERD 44388050 soft felt pad FLS Ø 80x50 mm shank dia. 6 mm for universal polishing work cn: POLISHING POINT cn2: POLISHING POINT cn_clear: POLISHINGPOINT d: Product description PFERD soft mounted felt flap wheels FLS dia. 80x50 mm shank dia. 6 mm for general polishing work Characteristics Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained Mounted felt flap wheels are used for pre-polishing and high-gloss polishing on small to medium-sized components Advantages: Can be profiled as desired, meaning they can also be used for tools with complex geometries. Precise retention of geometric shapes due to the hardness of these tools. Low thermal load on the workpiece. ds: dsc: kts: soft felt pad FLS Ø 80x50 mm shank dia. 6 mm for universal polishing work kpn: 44388050 kpn_dash: kpn_clear: 44388050 bkpn: PFERD 44388050 bkpn_clear: PFERD 44388050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing point sr_no_br_cl_ns: 44388050 sr_ns: PFERD44388050
r: 03206485 p: 24.83 pid: 34870 b: PFERD q: 0 st: lt: 8 ean: 4007220023631 sr: PFERD 44781532 sr_no_br: 44781532 sr_no_br_cl: 44781532 sr_cl: PFERD44781532 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 320 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 20 mm n: PFERD FR WS 11520 M14 A 320 flap wheel for angle grinder 115x20 mm, 320 grit universal application - 44781532 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm M14 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, 320 grit universal application kpn: FR WS 11520 M14 A 320 kpn_dash: kpn_clear: FRWS11520M14A320 bkpn: PFERD FR WS 11520 M14 A 320 bkpn_clear: PFERD FRWS11520M14A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44781532 sr_ns: PFERD44781532
r: 03206484 p: 24.83 pid: 32396 b: PFERD q: 0 st: lt: 8 ean: 4007220023624 sr: PFERD 44781524 sr_no_br: 44781524 sr_no_br_cl: 44781524 sr_cl: PFERD44781524 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 240 Connection size (machine) M14 Connection type (machine) Inner thread Thread type Metric Width 20 mm n: PFERD FR WS 11520 M14 A 240 flap wheel for angle grinder 115x20 mm, grain 240 universal application - 44781524 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm M14 A240 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, grain 240 universal application kpn: FR WS 11520 M14 A 240 kpn_dash: kpn_clear: FRWS11520M14A240 bkpn: PFERD FR WS 11520 M14 A 240 bkpn_clear: PFERD FRWS11520M14A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 44781524 sr_ns: PFERD44781524
r: 03206559 p: 24.83 pid: 33958 b: PFERD q: 0 st: lt: 8 ean: 4007220023686 sr: PFERD 47802822 sr_no_br: 47802822 sr_no_br_cl: 47802822 sr_cl: PFERD47802822 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 240 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 11520 5/8-11 A 240 flap wheel for angle grinder 115x20 mm, grain 240 universal application - 47802822 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm 5/8-11 A240 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, grain 240 universal application kpn: FR WS 11520 5/8-11 A 240 kpn_dash: FR WS 11520 5/8 kpn_clear: FRWS115205811A240 bkpn: PFERD FR WS 11520 5/8-11 A 240 bkpn_clear: PFERD FRWS115205811A240 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 47802822 sr_ns: PFERD47802822
r: 03206563 p: 24.83 pid: 32336 b: PFERD q: 0 st: lt: 8 ean: 4007220023693 sr: PFERD 47802823 sr_no_br: 47802823 sr_no_br_cl: 47802823 sr_cl: PFERD47802823 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 115 mm Grit size 320 Connection size (machine) 5/8" Connection type (machine) Bore Width 20 mm n: PFERD FR WS 11520 5/8-11 A 320 flap wheel for angle grinder 115x20 mm, 320 grit universal application - 47802823 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD flap grinding wheel for angle grinders FR WS dia. 115x20mm 5/8-11 A320 general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" The ideal tool for use on angle grinders in assembly shop operations For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. Can be mounted directly on the angle grinder without additional clamping devices. ds: dsc: kts: flap wheel for angle grinder 115x20 mm, 320 grit universal application kpn: FR WS 11520 5/8-11 A 320 kpn_dash: FR WS 11520 5/8 kpn_clear: FRWS115205811A320 bkpn: PFERD FR WS 11520 5/8-11 A 320 bkpn_clear: PFERD FRWS115205811A320 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel sr_no_br_cl_ns: 47802823 sr_ns: PFERD47802823
r: 04022048 p: 24.81 pid: 34125 b: PFERD q: 0 st: lt: 8 ean: 4007220610206 sr: PFERD 39008425 sr_no_br: 39008425 sr_no_br_cl: 39008425 sr_cl: PFERD39008425 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Grit size 120 Bore size 32 mm Thickness 20 mm n: PFERD BW 15020-32 CN 120 CARBIDE grinding block Ø 150x20 mm bore-Ø 32 mm SiC120 for hard materials (e.g. carbide) - 39008425 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Bench grinding wheel dia. 150x20 mm centre hole dia. 32 mm SiC120 for hard materials e.g. tungsten carbide Characteristics PFERD bench grinding wheels have been adapted to the standard bench grinders on the market The CARBIDE type is used on hard materials, such as for sharpening tungsten carbide tools Advantages: Long tool life. High dimensional stability. High abrasive performance. Integrated adapter sleeves for mounting on almost any bench grinder spindle. ds: dsc: kts: grinding block Ø 150x20 mm bore-Ø 32 mm SiC120 for hard materials (e.g. carbide) kpn: BW 15020-32 CN 120 CARBIDE kpn_dash: BW 15020 kpn_clear: BW1502032CN120CARBIDE bkpn: PFERD BW 15020-32 CN 120 CARBIDE bkpn_clear: PFERD BW1502032CN120CARBIDE c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone sr_no_br_cl_ns: 39008425 sr_ns: PFERD39008425
r: 22012589 p: 24.81 pid: 34194 b: PFERD q: 0 st: lt: 9 ean: 4007220718902 sr: PFERD 39008570 sr_no_br: 39008570 sr_no_br_cl: 39008570 sr_cl: PFERD39008570 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Grit size 60 Bore size 32 mm Thickness 20 mm n: PFERD BW 15020-32 CN 60 CARBIDE grinding block Ø 150x20 mm bore-Ø 32 mm SiC60 for hard materials (e.g. carbide) - 39008570 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Bench grinding wheel dia. 150x20 mm centre hole dia. 32 mm SiC60 for hard materials e.g. tungsten carbide Characteristics PFERD bench grinding wheels have been adapted to the standard bench grinders on the market The CARBIDE type is used on hard materials, such as for sharpening tungsten carbide tools Advantages: Long tool life. High dimensional stability. High abrasive performance. Integrated adapter sleeves for mounting on almost any bench grinder spindle. ds: dsc: kts: grinding block Ø 150x20 mm bore-Ø 32 mm SiC60 for hard materials (e.g. carbide) kpn: BW 15020-32 CN 60 CARBIDE kpn_dash: BW 15020 kpn_clear: BW1502032CN60CARBIDE bkpn: PFERD BW 15020-32 CN 60 CARBIDE bkpn_clear: PFERD BW1502032CN60CARBIDE c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone sr_no_br_cl_ns: 39008570 sr_ns: PFERD39008570
r: 03239717 p: 24.81 pid: 33184 b: PFERD q: 0 st: lt: 6 ean: 4007220038086 sr: PFERD 39009724 sr_no_br: 39009724 sr_no_br_cl: 39009724 sr_cl: PFERD39009724 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 150 mm Grit size 80 Bore size 32 mm Thickness 20 mm n: PFERD BW 15020-32 CN 80 CARBIDE grinding block Ø 150x20 mm bore-Ø 32 mm SiC80 for hard materials (e.g. carbide) - 39009724 cn: GRINDING STONE cn2: GRINDING STONE cn_clear: GRINDINGSTONE d: Product description PFERD Bench grinding wheel dia. 150x20 mm centre hole dia. 32 mm SiC80 for hard materials e.g. tungsten carbide Characteristics PFERD bench grinding wheels have been adapted to the standard bench grinders on the market The CARBIDE type is used on hard materials, such as for sharpening tungsten carbide tools Advantages: Long tool life. High dimensional stability. High abrasive performance. Integrated adapter sleeves for mounting on almost any bench grinder spindle. ds: dsc: kts: grinding block Ø 150x20 mm bore-Ø 32 mm SiC80 for hard materials (e.g. carbide) kpn: BW 15020-32 CN 80 CARBIDE kpn_dash: BW 15020 kpn_clear: BW1502032CN80CARBIDE bkpn: PFERD BW 15020-32 CN 80 CARBIDE bkpn_clear: PFERD BW1502032CN80CARBIDE c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding stone sr_no_br_cl_ns: 39009724 sr_ns: PFERD39009724
