r: 03050095 p: 11.735 pid: 88212 b: RENOLD q: 12 st: 1 lt: 1 ean: 0673766003471 sr: RENOLD 16B1S30I sr_no_br: 16B1S30I sr_no_br_cl: 16B1S30I sr_cl: RENOLD16B1S30I sr_dash: sold: 293.375 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 4,12 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 2,8 kg/m Length (pin) 34,9 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-1 Version (link) Simplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 60000 N Inside width 17,02 mm n: RENOLD 16B1S30I reducer BLUE 16b-1 - simplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 16b-1 - simplex 1 inch kpn: 16B1S30I kpn_dash: kpn_clear: 16B1S30I bkpn: RENOLD 16B1S30I bkpn_clear: RENOLD 16B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B1S30I sr_ns: RENOLD16B1S30I
r: 03050133 p: 5.454 pid: 88224 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766020294 sr: RENOLD 08B1SSS12I sr_no_br: 08B1SSS12I sr_no_br_cl: 08B1SSS12I sr_cl: RENOLD08B1SSS12I sr_dash: sold: 54.54 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 12000 N Inside width 7,75 mm n: RENOLD 08B1SSS12I reduction link stainless steel 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 08b-1 - simplex 1/2 inch kpn: 08B1SSS12I kpn_dash: kpn_clear: 08B1SSS12I bkpn: RENOLD 08B1SSS12I bkpn_clear: RENOLD 08B1SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B1SSS12I sr_ns: RENOLD08B1SSS12I
r: 03050004 p: 8.11 pid: 88190 b: RENOLD q: 26 st: 1 lt: 1 ean: 0673766034833 sr: RENOLD 10B1S12I sr_no_br: 10B1S12I sr_no_br_cl: 10B1S12I sr_cl: RENOLD10B1S12I sr_dash: sold: 32.44 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 0,96 kg/m Length (pin) 18,8 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 9,65 mm n: RENOLD 10B1S12I reducing link BLUE 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 10b-1 - simplex 5/8 inch kpn: 10B1S12I kpn_dash: kpn_clear: 10B1S12I bkpn: RENOLD 10B1S12I bkpn_clear: RENOLD 10B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 10B1S12I sr_ns: RENOLD10B1S12I
r: 03050006 p: 11.735 pid: 89789 b: RENOLD q: 25 st: 1 lt: 1 ean: 0673766003181 sr: RENOLD 16B1S12I sr_no_br: 16B1S12I sr_no_br_cl: 16B1S12I sr_cl: RENOLD16B1S12I sr_dash: sold: 23.47 p_range: none act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 4,12 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 2,8 kg/m Length (pin) 34,9 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-1 Version (link) Simplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 60000 N Inside width 17,02 mm n: RENOLD 16B1S12I reducer BLUE 16b-1 - simplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 16b-1 - simplex 1 inch kpn: 16B1S12I kpn_dash: kpn_clear: 16B1S12I bkpn: RENOLD 16B1S12I bkpn_clear: RENOLD 16B1S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 16B1S12I sr_ns: RENOLD16B1S12I
r: 03050072 p: 8.76 pid: 90018 b: RENOLD q: 14 st: 1 lt: 1 ean: 0673766002351 sr: RENOLD GY10B1S30I sr_no_br: GY10B1S30I sr_no_br_cl: GY10B1S30I sr_cl: RENOLDGY10B1S30I sr_dash: sold: 8.76 p_range: none act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,81 kg/m Length (pin) 16 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-1 Version (link) Simplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 22200 N Inside width 6,48 mm n: RENOLD GY10B1S30I reducer SYNERGY 10b-1 - simplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 10b-1 - simplex 5/8 inch kpn: GY10B1S30I kpn_dash: kpn_clear: GY10B1S30I bkpn: RENOLD GY10B1S30I bkpn_clear: RENOLD GY10B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY10B1S30I sr_ns: RENOLDGY10B1S30I
r: 03050064 p: 7.69 pid: 87808 b: RENOLD q: 23 st: 1 lt: 1 ean: 0673766001651 sr: RENOLD 08B1S30I sr_no_br: 08B1S30I sr_no_br_cl: 08B1S30I sr_cl: RENOLD08B1S30I sr_dash: sold: 7.69 p_range: none act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,7 kg/m Length (pin) 16,5 mm Height 2 Thickness (outer plate) 1,55 mm Plate height 11,7 mm Type (ISO/ANSI) 08B-1 Version (link) Simplex Diameter (pin) 4,45 mm Diameter (roller) 8,51 mm Breaking strength 17800 N Inside width 7,75 mm n: RENOLD 08B1S30I reducer BLUE 08b-1 - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 08b-1 - simplex 1/2 inch kpn: 08B1S30I kpn_dash: kpn_clear: 08B1S30I bkpn: RENOLD 08B1S30I bkpn_clear: RENOLD 08B1S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 08B1S30I sr_ns: RENOLD08B1S30I
r: 03050236 p: 5.619 pid: 87882 b: RENOLD q: 10 st: 1 lt: 1 ean: 0673766005529 sr: RENOLD 111046S30I sr_no_br: 111046S30I sr_no_br_cl: 111046S30I sr_cl: RENOLD111046S30I sr_dash: sold: 5.619 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,13 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,35 kg/m Length (pin) 11,4 mm Height 2 Thickness (outer plate) 0,98 mm Plate height 9,6 mm Version (link) Simplex Diameter (pin) 4,09 mm Diameter (roller) 7,75 mm Breaking strength 8900 N Inside width 4,88 mm n: RENOLD 111046S30I reducer SYNERGY - simplex 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY - simplex 1/2 inch kpn: 111046S30I kpn_dash: kpn_clear: 111046S30I bkpn: RENOLD 111046S30I bkpn_clear: RENOLD 111046S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 111046S30I sr_ns: RENOLD111046S30I
r: 02274382 p: 2224.494 pid: 88184 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B3S12I sr_no_br: 40B3S12I sr_no_br_cl: 40B3S12I sr_cl: RENOLD40B3S12I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Thickness (inner plate) 8,13 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 48,9 kg/m Length (pin) 222,8 mm Height 9,5 Thickness (outer plate) 8,13 mm Plate height 52,96 mm Type (ISO/ANSI) 40B-3 Version (link) Triplex Diameter (pin) 22,89 mm Diameter (roller) 39,37 mm Breaking strength 950000 N Inside width 39,3 mm n: RENOLD 40B3S12I reducer BLUE 40b-3 - plywood 2 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 40b-3 - plywood 2 1/2 inch kpn: 40B3S12I kpn_dash: kpn_clear: 40B3S12I bkpn: RENOLD 40B3S12I bkpn_clear: RENOLD 40B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40B3S12I sr_ns: RENOLD40B3S12I
r: 02274380 p: 1488.008 pid: 87792 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40B2S12I sr_no_br: 40B2S12I sr_no_br_cl: 40B2S12I sr_cl: RENOLD40B2S12I sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Pitch 2 1/2 inch; 63,5 mm Thickness (inner plate) 8,13 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 32,8 kg/m Length (pin) 150,5 mm Height 9,5 Thickness (outer plate) 8,13 mm Plate height 52,96 mm Type (ISO/ANSI) 40B-2 Version (link) Duplex Diameter (pin) 22,89 mm Diameter (roller) 39,37 mm Breaking strength 630000 N Inside width 39,37 mm n: RENOLD 40B2S12I reducing link BLUE 40b-2 - duplex 2 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 40b-2 - duplex 2 1/2 inch kpn: 40B2S12I kpn_dash: kpn_clear: 40B2S12I bkpn: RENOLD 40B2S12I bkpn_clear: RENOLD 40B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40B2S12I sr_ns: RENOLD40B2S12I
r: 03050228 p: 1376.367 pid: 87874 b: RENOLD q: 0 st: lt: 15 ean: 0673766043095 sr: RENOLD GY120A3S12I sr_no_br: GY120A3S12I sr_no_br_cl: GY120A3S12I sr_cl: RENOLDGY120A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 16,7 kg/m Length (pin) 140,2 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120A-3 Version (link) Triplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 375000 N Inside width 25,23 mm n: RENOLD GY120A3S12I reducer SYNERGY 120a-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 120a-3 - plywood 1 1/2 inch kpn: GY120A3S12I kpn_dash: kpn_clear: GY120A3S12I bkpn: RENOLD GY120A3S12I bkpn_clear: RENOLD GY120A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY120A3S12I sr_ns: RENOLDGY120A3S12I
r: 02097291 p: 1322.925 pid: 87787 b: RENOLD q: 0 st: lt: 15 ean: 6623901310241 sr: RENOLD 160A3S12I sr_no_br: 160A3S12I sr_no_br_cl: 160A3S12I sr_cl: RENOLD160A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 31 kg/m Length (pin) 180,2 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-3 Version (link) Triplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 669000 N Inside width 31,55 mm n: RENOLD 160A3S12I reducer BLUE 160-3 - plywood 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 160-3 - plywood 2 inch kpn: 160A3S12I kpn_dash: kpn_clear: 160A3S12I bkpn: RENOLD 160A3S12I bkpn_clear: RENOLD 160A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A3S12I sr_ns: RENOLD160A3S12I
r: 03050205 p: 1125.941 pid: 87853 b: RENOLD q: 0 st: lt: 15 ean: 6623901324279 sr: RENOLD GY24B3S12I sr_no_br: GY24B3S12I sr_no_br_cl: GY24B3S12I sr_cl: RENOLDGY24B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 22,25 kg/m Length (pin) 149,7 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-3 Version (link) Triplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 425000 N Inside width 25,4 mm n: RENOLD GY24B3S12I reducer SYNERGY 24b-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 24b-3 - plywood 1 1/2 inch kpn: GY24B3S12I kpn_dash: kpn_clear: GY24B3S12I bkpn: RENOLD GY24B3S12I bkpn_clear: RENOLD GY24B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY24B3S12I sr_ns: RENOLDGY24B3S12I
r: 02097286 p: 1071.592 pid: 89778 b: RENOLD q: 0 st: lt: 15 ean: 6623901307616 sr: RENOLD 140A3S12I sr_no_br: 140A3S12I sr_no_br_cl: 140A3S12I sr_cl: RENOLD140A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 5,61 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 23,1 kg/m Length (pin) 150,7 mm Height 5,2 Thickness (outer plate) 5,61 mm Plate height 42,23 mm Type (ISO/ANSI) 140-3 Version (link) Triplex Diameter (pin) 12,71 mm Diameter (roller) 25,4 mm Breaking strength 510000 N Inside width 25,23 mm n: RENOLD 140A3S12I reducer BLUE 140-3 - plywood 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 140-3 - plywood 1 3/4 inch kpn: 140A3S12I kpn_dash: kpn_clear: 140A3S12I bkpn: RENOLD 140A3S12I bkpn_clear: RENOLD 140A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 140A3S12I sr_ns: RENOLD140A3S12I
r: 03050207 p: 1017.645 pid: 30004 b: RENOLD q: 0 st: lt: 15 ean: 0673766009749 sr: RENOLD 32B3S12I sr_no_br: 32B3S12I sr_no_br_cl: 32B3S12I sr_cl: RENOLD32B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 7,11 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 30 kg/m Length (pin) 180,5 mm Height 8 Thickness (outer plate) 6,35 mm Plate height 42,29 mm Type (ISO/ANSI) 32B-3 Version (link) Triplex Diameter (pin) 17,81 mm Diameter (roller) 29,21 mm Breaking strength 670000 N Inside width 30,99 mm n: RENOLD 32B3S12I reducer BLUE 32b-3 - plywood 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 32b-3 - plywood 2 inch kpn: 32B3S12I kpn_dash: kpn_clear: 32B3S12I bkpn: RENOLD 32B3S12I bkpn_clear: RENOLD 32B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 32B3S12I sr_ns: RENOLD32B3S12I
r: 03050219 p: 875.879 pid: 88657 b: RENOLD q: 0 st: lt: 15 ean: 0673766043088 sr: RENOLD GY120A2S12I sr_no_br: GY120A2S12I sr_no_br_cl: GY120A2S12I sr_cl: RENOLDGY120A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 5,7 kg/m Length (pin) 94,7 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-2 Version (link) Duplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 125000 N Inside width 25,23 mm n: RENOLD GY120A2S12I reducer SYNERGY 120-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 120-2 - duplex 1 1/2 inch kpn: GY120A2S12I kpn_dash: kpn_clear: GY120A2S12I bkpn: RENOLD GY120A2S12I bkpn_clear: RENOLD GY120A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY120A2S12I sr_ns: RENOLDGY120A2S12I
r: 02097230 p: 841.866 pid: 89731 b: RENOLD q: 0 st: lt: 15 ean: 6623900528142 sr: RENOLD 160A2S12I sr_no_br: 160A2S12I sr_no_br_cl: 160A2S12I sr_cl: RENOLD160A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Thickness (inner plate) 6,35 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 20,6 kg/m Length (pin) 121,6 mm Height 6,5 Thickness (outer plate) 6,35 mm Plate height 48,26 mm Type (ISO/ANSI) 160-2 Version (link) Duplex Diameter (pin) 14,29 mm Diameter (roller) 28,58 mm Breaking strength 446000 N Inside width 31,55 mm n: RENOLD 160A2S12I reducing link BLUE 160-2 - duplex 2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 160-2 - duplex 2 inch kpn: 160A2S12I kpn_dash: kpn_clear: 160A2S12I bkpn: RENOLD 160A2S12I bkpn_clear: RENOLD 160A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 160A2S12I sr_ns: RENOLD160A2S12I
r: 03050206 p: 824.316 pid: 87856 b: RENOLD q: 0 st: lt: 15 ean: 0673766009701 sr: RENOLD 28B3S12I sr_no_br: 28B3S12I sr_no_br_cl: 28B3S12I sr_cl: RENOLD28B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 7,62 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 28 kg/m Length (pin) 183,3 mm Height 6,8 Thickness (outer plate) 6,35 mm Plate height 37,08 mm Type (ISO/ANSI) 28B-3 Version (link) Triplex Diameter (pin) 15,9 mm Diameter (roller) 27,94 mm Breaking strength 530000 N Inside width 30,99 mm n: RENOLD 28B3S12I reducer BLUE 28b-3 - plywood 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 28b-3 - plywood 1 3/4 inch kpn: 28B3S12I kpn_dash: kpn_clear: 28B3S12I bkpn: RENOLD 28B3S12I bkpn_clear: RENOLD 28B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 28B3S12I sr_ns: RENOLD28B3S12I
r: 02097272 p: 731.859 pid: 88174 b: RENOLD q: 0 st: lt: 15 ean: 6623900526056 sr: RENOLD 120A3S12I sr_no_br: 120A3S12I sr_no_br_cl: 120A3S12I sr_cl: RENOLD120A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 4,8 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 16,7 kg/m Length (pin) 140,2 mm Height 5,3 Thickness (outer plate) 4,8 mm Plate height 36,2 mm Type (ISO/ANSI) 120-3 Version (link) Triplex Diameter (pin) 11,11 mm Diameter (roller) 22,23 mm Breaking strength 375000 N Inside width 25,23 mm n: RENOLD 120A3S12I reducer BLUE 120-3 - plywood 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 120-3 - plywood 1 1/2 inch kpn: 120A3S12I kpn_dash: kpn_clear: 120A3S12I bkpn: RENOLD 120A3S12I bkpn_clear: RENOLD 120A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 120A3S12I sr_ns: RENOLD120A3S12I
r: 03050198 p: 716.509 pid: 88237 b: RENOLD q: 0 st: lt: 15 ean: 6623901324217 sr: RENOLD GY24B2S12I sr_no_br: GY24B2S12I sr_no_br_cl: GY24B2S12I sr_cl: RENOLDGY24B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 1/2 inch; 38,1 mm Thickness (inner plate) 6,1 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 14,8 kg/m Length (pin) 101,3 mm Height 6,8 Thickness (outer plate) 5,08 mm Plate height 33,4 mm Type (ISO/ANSI) 24B-2 Version (link) Duplex Diameter (pin) 14,63 mm Diameter (roller) 25,4 mm Breaking strength 280000 N Inside width 25,4 mm n: RENOLD GY24B2S12I reducer SYNERGY 24b-2 - duplex 1 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 24b-2 - duplex 1 1/2 inch kpn: GY24B2S12I kpn_dash: kpn_clear: GY24B2S12I bkpn: RENOLD GY24B2S12I bkpn_clear: RENOLD GY24B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY24B2S12I sr_ns: RENOLDGY24B2S12I
r: 02097222 p: 681.926 pid: 87778 b: RENOLD q: 0 st: lt: 15 ean: 6623900527213 sr: RENOLD 140A2S12I sr_no_br: 140A2S12I sr_no_br_cl: 140A2S12I sr_cl: RENOLD140A2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 3/4 inch; 44,45 mm Thickness (inner plate) 5,61 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 15,5 kg/m Length (pin) 101,8 mm Height 5,2 Thickness (outer plate) 5,61 mm Plate height 42,23 mm Type (ISO/ANSI) 140-2 Version (link) Duplex Diameter (pin) 12,71 mm Diameter (roller) 25,4 mm Breaking strength 340000 N Inside width 25,23 mm n: RENOLD 140A2S12I reducing link BLUE 140-2 - duplex 1 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducing link BLUE 140-2 - duplex 1 3/4 inch kpn: 140A2S12I kpn_dash: kpn_clear: 140A2S12I bkpn: RENOLD 140A2S12I bkpn_clear: RENOLD 140A2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 140A2S12I sr_ns: RENOLD140A2S12I
