r: 02880356 p: 65.454 pid: 118227 b: MILWAUKEE q: 0 st: lt: 7 ean: 4002395365418 sr: MILWAUKEE 4932399887 sr_no_br: 4932399887 sr_no_br_cl: 4932399887 sr_cl: MILWAUKEE4932399887 sr_dash: sold: 130.908 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 177 mm Connection type Inner thread n: MILWAUKEE 4932399887 HOLE DOZER holesaw bi-metal 177 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Cutting edge technology for maximum productivity. Tooth design - A 3.5 teeth per inch tooth design with a positive 10° tooth angle provides the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Special shaped tooth angle has less tendency to snag on thinner materials. - Teeth are alternate/side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling. Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser welded onto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesaws are ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood. Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain its shape but also has built in elasticity. - Effective sawing depth is 41 mm. Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. - Thick backs add strength and rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws. Multiple slot design aids the removal and ejection of the core. Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only). This high quality holesaw range is the perfect solution for cutting all types of materials: - Steel up to 1000 N/mm² strength - Stainless steel and acid resistant steel - Non-ferrous metals - Cast iron - Aluminium - Wood - Medium density fibreboard (MDF) - Gypsum plasterboard - Sandwich materials - PVC. ds: dsc: kts: HOLE DOZER holesaw bi-metal 177 mm kpn: 4932399887 kpn_dash: kpn_clear: 4932399887 bkpn: MILWAUKEE 4932399887 bkpn_clear: MILWAUKEE 4932399887 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee cutting tools / Milwaukee sawing and cutting / Milwaukee hole saw sr_no_br_cl_ns: 4932399887 sr_ns: MILWAUKEE4932399887
r: 02228194 p: 16.363 pid: 139840 b: BAHCO q: 2 st: 1 lt: 1 ean: 7311518270902 sr: BAHCO 3830-55-VIP sr_no_br: 3830-55-VIP sr_no_br_cl: 383055VIP sr_cl: BAHCO383055VIP sr_dash: BAHCO 3830 sold: 130.904 p_range: KLIUM_PRODUCT_RANGE_121 type: standard act: 1 avo: 1 av: Diameter (hole saw) 55 mm Max. cutting depth 1 1/2 inch Overall length 38 mm Product Range Bahco Sandflex n: BAHCO 3830-55-VIP holesaw Sandflex bi-metal for metal, wood and plastic in cardboard box 55 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description: Sandflex® bi-metal holesaws work excellently in most materials such as wood, plastics, non ferrous and ferrous steel including stainless steel Fit all power drills, both stationary and portable Knockout holes allow easy removal of cores Cutting depth max 38 mm (1 1/2") 4/6 teeth per inch All -VIP holesaws are packed in a cardboard box with an instruction leaflet enclosed Max. holesize = nominal holesaw size +1.5 mm./- 0.0 Extra large sizes 168 and 210 mm with 6TPI and normal cutting depth 177 mm with 4/6TPI with cutting depth max 50 mm All large holesaws cut with 0 degree cutting angle to be less aggressive ds: dsc: kts: holesaw Sandflex bi-metal for metal, wood and plastic in cardboard box 55 mm kpn: 3830-55-VIP kpn_dash: 3830 kpn_clear: 383055VIP bkpn: BAHCO 3830-55-VIP bkpn_clear: BAHCO 383055VIP c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bahco / Bahco tools / Bahco machining tools / Bahco cutting tools / Bahco sawing and cutting / Bahco hole saw | Home / Our brands / Bahco / Bahco Ranges / Bahco sandflex sr_no_br_cl_ns: 383055VIP sr_ns: BAHCO3830-55-VIP
r: 02600967 p: 11.9 pid: 148493 b: MAKITA q: 0 st: lt: 8 ean: 0088381914154 sr: MAKITA P-05000 sr_no_br: P-05000 sr_no_br_cl: P05000 sr_cl: MAKITAP05000 sr_dash: MAKITA P sold: 130.9 p_range: none type: standard act: 1 avo: 1 av: Length 150 mm For material Wood Number of teeth per inch 11 Quantiy per pack 5 n: MAKITA P-05000 HCS reciprocating saw blade for wood 150 x 1.2 mm cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description Cutting wood fast Reciprocating saw blade for cutting wood. This high-carbon steel blade has an overall length of 150 mm and a working length of 130 mm. The blade is 1.2 mm thick and has 10 TPI. The pack contains 5 blades. This blade is made of high carbon steel (HCS). It is a material that resists bending well and is therefore most suitable for cutting softer materials such as soft wood, soft plastics and wood fibre boards. ds: dsc: kts: HCS reciprocating saw blade for wood 150 x 1.2 mm kpn: P-05000 kpn_dash: P kpn_clear: P05000 bkpn: MAKITA P-05000 bkpn_clear: MAKITA P05000 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Makita / Makita tools / Makita machining tools / Makita cutting tools / Makita sawing and cutting / Makita reciprocating saw blade sr_no_br_cl_ns: P05000 sr_ns: MAKITAP-05000
r: 08119979 p: 18.677 pid: 160948 b: BOSCH q: 0 st: lt: 8 ean: 6949509240491 sr: BOSCH 2608594405 sr_no_br: 2608594405 sr_no_br_cl: 2608594405 sr_cl: BOSCH2608594405 sr_dash: sold: 130.739 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 86 mm Connection type Power Change n: BOSCH 2608594405 PRO Multi Material PC Plus hole saw 86 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Lasts up to 2x longer than a standard HSS M3 hole saw Long life when drilling holes in various materials Steel with 8% cobalt for durability and great performance For use with the tool-free Bosch Power Change Plus adapter: offers precision and robustness ds: dsc: kts: PRO Multi Material PC Plus hole saw 86 mm kpn: 2608594405 kpn_dash: kpn_clear: 2608594405 bkpn: BOSCH 2608594405 bkpn_clear: BOSCH 2608594405 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608594405 sr_ns: BOSCH2608594405
r: 02224199 p: 26.115 pid: 132562 b: BOSCH q: 0 st: lt: 8 ean: 3165140194792 sr: BOSCH 2608640700 sr_no_br: 2608640700 sr_no_br_cl: 2608640700 sr_cl: BOSCH2608640700 sr_dash: sold: 130.575 p_range: none type: standard act: 1 avo: 1 av: Saw blade diameter 300 mm Bore size 30 mm Number of teeth 20 Kerf width 2,8 mm For material Wood with nails Mounting (saw blade/cutter) Round n: BOSCH 2608640700 circular saw blade Construct Wood, 300 x 30 x 2.8 mm, 20T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Construct Wood, 300 x 30 x 2.8 mm, 20T Durable when cutting construction wood with nails and concrete residues Precision ground high-quality carbide teeth make the blade robust for tough applications Expansion slots reduce vibration during use, which reduces noise and reduces heat generation. Advantages Long cutting life - The Construct Wood circular saw blade has a long life when cutting construction timber with nails and concrete remnants. The precision ground high-quality carbide teeth make the blade robust for tough applications. In addition, its expansion slots reduce vibration during use, which reduces noise and reduces heat generation. The base blade is made of dimensionally stable SK5-hardened steel (>40 HRC) which ensures accuracy. Use this saw blade for construction timber with nails and concrete remnants. Compatible with table saws. Construct Wood circular saw blade has a long life when cutting construction wood with nails and concrete remnants Shaft works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Construct Wood, 300 x 30 x 2.8 mm, 20T kpn: 2608640700 kpn_dash: kpn_clear: 2608640700 bkpn: BOSCH 2608640700 bkpn_clear: BOSCH 2608640700 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade sr_no_br_cl_ns: 2608640700 sr_ns: BOSCH2608640700
r: 02784541 p: 65.247 pid: 133898 b: BOSCH q: 0 st: lt: 8 ean: 3165140796446 sr: BOSCH 2608644078 sr_no_br: 2608644078 sr_no_br_cl: 2608644078 sr_cl: BOSCH2608644078 sr_dash: sold: 130.494 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 450 mm Bore size 30 mm Number of teeth 34 Kerf width 4,5 mm For material Wood Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644078 circular saw blade Expert for Wood, 450 x 30 x 4.5 mm, 34T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Wood, 450 x 30 x 4.5 mm, 34T Long lifetime with high cutting performance in wood Expert for Wood circular saw blades have a long lifetime with great cutting performance in wood Extra Hard MicroteQ teeth are manufactured in-house by Bosch from high-strength carbide grit for high durability Advantages Long cutting life - MicroteQ teeth (manufactured in-house) from high-density carbide and the robust tooth shape are ideal for universal use Compatible with hacksaws and hand saws Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which feature an ATB (Alternate Top Bevel) tooth geometry: with a large number of teeth, the blade gives clean cuts, while a low number of teeth delivers solid and efficient cuts. Arbor works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Expert for Wood, 450 x 30 x 4.5 mm, 34T kpn: 2608644078 kpn_dash: kpn_clear: 2608644078 bkpn: BOSCH 2608644078 bkpn_clear: BOSCH 2608644078 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644078 sr_ns: BOSCH2608644078
r: 02784701 p: 43.471 pid: 134036 b: BOSCH q: 1 st: 1 lt: 1 ean: 3165140796675 sr: BOSCH 2608644101 sr_no_br: 2608644101 sr_no_br_cl: 2608644101 sr_cl: BOSCH2608644101 sr_dash: sold: 130.413 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 190 mm Bore size 20 mm Number of teeth 56 Kerf width 2,6 mm For material Aluminium Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644101 circular saw blade Expert for aluminium, 190 x 20 x 2.6 mm, 56T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Aluminium, 190 x 20 x 2.6 mm, 56T Perfect cuts in aluminium Expert for Aluminium circular saw blade delivers perfect cuts in aluminium Extra Hard MicroteQ teeth (manufactured by Bosch) of fine carbide grit for maximum service life and performance Advantages Perfect cuts in aluminium - The Expert for Aluminium circular saw blade delivers perfect cuts in aluminium. Unique, Extra Hard MicroteQ teeth manufactured in-house by Bosch from very fine carbide grains give maximum blade life and performance. This performance is also enhanced by the saw blade's ProteQtion coating that prevents corrosion and delivers reliable cuts with reduced friction. In addition, this product features vibration-damping slots for effortless cutting, significantly less noise and significantly reduced vibration. Use this saw blade for aluminium, non-ferrous metals, plastics, epoxy and wood. Compatible with plunge and hand saws The Expert for Aluminium circular saw blade features the HLTCG (High-Low Triple Chip Ground) tooth shape, which makes the blade robust for cutting in aluminium. Bore works with or without reducing rings to fit different sizes. ds: dsc: kts: circular saw blade Expert for aluminium, 190 x 20 x 2.6 mm, 56T kpn: 2608644101 kpn_dash: kpn_clear: 2608644101 bkpn: BOSCH 2608644101 bkpn_clear: BOSCH 2608644101 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644101 sr_ns: BOSCH2608644101
r: 08070885 p: 32.561 pid: 136286 b: DEWALT q: 0 st: lt: 8 ean: 5011402380992 sr: DEWALT DT8472-QZ sr_no_br: DT8472-QZ sr_no_br_cl: DT8472QZ sr_cl: DEWALTDT8472QZ sr_dash: DEWALT DT8472 sold: 130.244 p_range: none type: standard act: 1 avo: 1 av: Length 2215 mm Thickness 0,4 mm Width 10 mm Number of teeth per inch 6 n: DEWALT DT8472-QZ Band saw blade, 2215x10x0.4mm, 6TPI, universal for wood and plastic (for dW876) cn: BAND SAW BLADE cn2: BAND SAW BLADE cn_clear: BANDSAWBLADE d: Product description Band saw blade, 2215x10x0.4mm, 6TPI, universal for wood and plastic (for DW876) Features Saw blades made of high quality, tempered steel Extremely sharpened and hardened teeth allow cleanest cuts Specially hardened teeth ds: DeWALT Power Month at Klium - Maximum savings! This DeWALT tool is part of the DeWALT Power Month at Klium. What does this mean? Spend €350 excl. VAT on DeWALT products and receive a free XR 18V 5.0Ah battery instantly (Klium only - automatically added to your shopping cart). Offer valid from 01.07.2026 through 30.07.2026 or while stocks last. Once it's gone, it's gone. dsc: kts: Band saw blade, 2215x10x0.4mm, 6TPI, universal for wood and plastic (for dW876) kpn: DT8472-QZ kpn_dash: DT8472 kpn_clear: DT8472QZ bkpn: DEWALT DT8472-QZ bkpn_clear: DEWALT DT8472QZ c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Band saw blade | Home / Our brands / Dewalt / Dewalt tools / Dewalt machining tools / Dewalt cutting tools / Dewalt sawing and cutting / Dewalt band saw blade sr_no_br_cl_ns: DT8472QZ sr_ns: DEWALTDT8472-QZ
r: 08135980 p: 32.561 pid: 177160 b: BOSCH q: 2 st: 1 lt: 1 ean: 6949509248404 sr: BOSCH 2608901942 sr_no_br: 2608901942 sr_no_br_cl: 2608901942 sr_cl: BOSCH2608901942 sr_dash: sold: 130.244 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 105 mm Connection type Power Change Max. cutting depth 60 mm n: BOSCH 2608901942 EXPERT Construction Material Power Change Plus hole saw, 105 x 60 mm cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description Long service life when sawing holes in bricks and chipboard Exceptional durability thanks to Bosch Carbide Technology: the hardest metal is integrated into the tooth structure using advanced design and manufacturing techniques. Efficient splinter removal through large slots. Splinter removal from work surfaces is essential for speed and increases durability. Sharp and ground teeth made of fine carbide for strength, durability and precision. The teeth are made of high-quality carbide grit and are individually shaped for top performance. For use with the tool-free Bosch Power Change Plus adapter: offers precision and robustness ds: dsc: kts: EXPERT Construction Material Power Change Plus hole saw, 105 x 60 mm kpn: 2608901942 kpn_dash: kpn_clear: 2608901942 bkpn: BOSCH 2608901942 bkpn_clear: BOSCH 2608901942 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608901942 sr_ns: BOSCH2608901942
r: 02157135 p: 43.305 pid: 141200 b: METABO q: 0 st: lt: 8 ean: 4007430176837 sr: METABO 628046000 sr_no_br: 628046000 sr_no_br_cl: 628046000 sr_cl: METABO628046000 sr_dash: sold: 129.915 p_range: KLIUM_PRODUCT_RANGE_266 type: standard act: 1 avo: 1 av: Saw blade diameter 250 mm Mounting (saw blade/cutter) Round Bore size 30 mm Number of teeth 42 Kerf width 2,8 mm For material Wood Product Range Metabo Professional n: METABO 628046000 saw blade "precision cut wood - professional", 250x30, Z42 WZ 15° cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Very wide range of uses in wood processing For very good, clean cutting results for longitudinal or cross-cuts in softwood and hardwood Perfectly suited for hard wood and plywood, untreated chipboards, coated or veneered, MDF, composite materials High power consumption so the saw must have a high performance motor Particularly long tool life thanks to best carbide quality and finely-ground teeth Precise, low-noise and vibration-minimised cuts thanks to lasered expansion slots (and partially laser ornaments) as well as lasered steel blades made from sintered steel Secondary holder for circular saw blades with Ø 216, 250, 254 and over 300 mm ds: dsc: kts: saw blade "precision cut wood - professional", 250x30, Z42 WZ 15° kpn: 628046000 kpn_dash: kpn_clear: 628046000 bkpn: METABO 628046000 bkpn_clear: METABO 628046000 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Metabo / Metabo tools / Metabo machining tools / Metabo cutting tools / Metabo sawing and cutting / Metabo circular saw blade | Home / Our brands / Metabo / Metabo Ranges / Metabo professional sr_no_br_cl_ns: 628046000 sr_ns: METABO628046000
r: 08055489 p: 21.652 pid: 148385 b: MAKITA q: 0 st: lt: 8 ean: 0088381539357 sr: MAKITA B-66450 sr_no_br: B-66450 sr_no_br_cl: B66450 sr_cl: MAKITAB66450 sr_dash: MAKITA B sold: 129.912 p_range: none type: standard act: 1 avo: 1 av: Width (saw blade) 32 mm Saw blade diameter N/A mm Length (saw blade) 70 mm For material Wood Saw blade type Plunge-cut blade Connection profile Starlockmax n: MAKITA B-66450 TC/HM straight circular saw blade MAM006 multi-material Starlock Max 32mm x 70mm cn: SAW BLADE FOR OSCILLATING MULTI-TOOL cn2: SAW BLADE FOR OSCILLATING MULTI-TOOL cn_clear: SAWBLADEFOROSCILLATINGMULTITOOL d: Product description Blade for various deep plunge cuts of 70 mm for metal, carbon fibre, abrasives Starlock Max multi-tool blade specially designed for cutting materials such as metal, stainless steel, epoxy, fibreglass and plasterboard. This TC/HM blade has a width of 32 mm and a working length of 70 mm. The blade has 20 TPI. The pack contains 1 blade. Multitool blade with Starlock Max attachment. Designed for the most demanding tasks, the Starlock Max blade delivers the highest level of torque transfer and is suitable for heavy-duty applications. The Starlock Max blade is colour-coded for easy identification. The blade is designed for plunge-cut saws. It has a carbide tip welded to the cutting edge of the blade, making this very hard blade highly resistant to abrasion and overheating. These properties make the blade suitable for a variety of materials. ds: dsc: kts: TC/HM straight circular saw blade MAM006 multi-material Starlock Max 32mm x 70mm kpn: B-66450 kpn_dash: B kpn_clear: B66450 bkpn: MAKITA B-66450 bkpn_clear: MAKITA B66450 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Saw blade for oscillating multi-tool | Home / Our brands / Makita / Makita tools / Makita machining tools / Makita cutting tools / Makita sawing and cutting / Makita saw blade for oscillating multi-tool sr_no_br_cl_ns: B66450 sr_ns: MAKITAB-66450
r: 55960014 p: 43.21 pid: 144014 b: PFERD q: 0 st: lt: 3 ean: 4007220500811 sr: PFERD 25102068 sr_no_br: 25102068 sr_no_br_cl: 25102068 sr_cl: PFERD25102068 sr_dash: sold: 129.63 p_range: none type: standard act: 1 avo: 1 av: Diameter (hole saw) 68 mm; 2 11/16 inch Overall length 48 mm Connection size 5/8" Connection type Internal thread n: PFERD 25102068 bi-metal holesaw Co8/M42 Ø 68 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description PFERD Bimetal hole saw Co8/M42 dia. 68 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood Characteristics Hole saws are made from tough, shatter-proof, sturdy HSS bimetal The saw teeth are made from high-quality M42 (Co8) material They are used for cutting out holes The thread version 5/8-18 UNF includes the thread LS 32 to LS 210 The matching hole saw arbor is LSS 2 Advantages: Cost-effective sawing of round cut-outs. Chattering during sawing is prevented by the alternating tooth pitch. High concentricity. Good chip removal. The hole saw is conveniently centred and guided via the replaceable HSS pilot drill. Hole saw arbor is supplied with an ejection spring for improved ejection of the sawn material. ds: dsc: kts: bi-metal holesaw Co8/M42 Ø 68 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood kpn: 25102068 kpn_dash: kpn_clear: 25102068 bkpn: PFERD 25102068 bkpn_clear: PFERD 25102068 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd cutting tools / Pferd sawing and cutting / Pferd hole saw sr_no_br_cl_ns: 25102068 sr_ns: PFERD25102068
r: 03013057 p: 32.396 pid: 109645 b: MAKITA q: 0 st: lt: 10 ean: 0088381422000 sr: MAKITA B-33130 sr_no_br: B-33130 sr_no_br_cl: B33130 sr_cl: MAKITAB33130 sr_dash: MAKITA B sold: 129.584 p_range: KLIUM_PRODUCT_RANGE_104 type: standard act: 1 avo: 1 av: Saw blade diameter 235 mm Bore size 30 mm Number of teeth 24 Kerf width 2,3 mm For material Wood with nails Mounting (saw blade/cutter) Round Product Range Makita SPECIALIZED n: MAKITA B-33130 saw blade SPECIALIZED wood with nails 235x30x24T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade, Specialized TCT, 235 x 30 mm, 24 T Specialized circular saw blade with a diameter of 235 mm for cutting wood that is full of nails. The blade has 24 carbide teeth, a cut of 2.3 mm and a hole diameter of 30 mm. Special circular saw blade with deeper teeth for wood full of knots and nails. The teeth of the blade are integrated deep into the base of the blade, making it ideal for cutting wood with knots and wood with nails. Extremely robust and durable. Longer service intervals and high user-friendliness. ds: dsc: kts: saw blade SPECIALIZED wood with nails 235x30x24T kpn: B-33130 kpn_dash: B kpn_clear: B33130 bkpn: MAKITA B-33130 bkpn_clear: MAKITA B33130 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Makita / Makita tools / Makita machining tools / Makita cutting tools / Makita sawing and cutting / Makita circular saw blade | Home / Our brands / Makita / Makita Ranges / Makita specialized sr_no_br_cl_ns: B33130 sr_ns: MAKITAB-33130
