PU Remover is a ready to use gel for the easy removal of all remains of cured PU Foam.
Characteristics:
Very active
Odourless
Free of (aromatic) hydrocarbons
Easily biodegradable
Economic and easy to apply
Applications:
PU Remover easily removes all cured PU Foam residues on non porous surfaces such as plastics, metals, PVC etc.
Directions for use:
Application method: Remove mechanically or cut away carefully as much cured foam as possible. Apply PU Remover by means of the enclosed brush onto the cured PU foam. Leave PU Remover for at least 30 minutes and maximum 2 hours. Remove dissolved foam with the enclosed spatula and wipe off with a dry cloth. If necessary, repeat treatment by reapplying PU remover.
Application temperature: +5 to +35°C
Cleaning: damp cloth
Remarks:
Always stick to recommended working time to avoid damage of the surface
PU Remover may cause staining on porous surfaces (such as natural stone)
Key features according to our expert
Net volume: 100 ml
Relative density: 1,5
ADR packing group: Not applicable
UN number: Not applicable
Principal hazard property: GHS07 Harmful or irritant