r: 02458080 p: 11.428 pid: 121771 b: SOUDAL q: 147 st: 1 lt: 1 ean: 5411183119673 sr: SOUDAL 124715 sr_no_br: 124715 sr_no_br_cl: 124715 sr_cl: SOUDAL124715 sr_dash: sold: 12650.796 p_range: none type: standard act: 1 avo: 1 av: H-statements H334; H412 ADR packing group ADR class UN number Conseils de prudence (P) P261; P273; P284; P304 + P340; P342 + P311; P501 Principal hazard property GHS08 Health hazard Hazard class GHS08 Health hazard Physical state Liquid Flash point >100 °C Packaging Cartridge Colour (manufacturer) Champagne Net volume 310 ml n: SOUDAL Aquaswell polyurethane joint sealant, swells on contact with water (310 ml) - 124715 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudal Aquaswell is a high quality, one component polyurethane sealant which swells up in contact with water to create a water- and gastight seal in pipe- and cable penetrations. Characteristics: Waterand gastight up to 5 bar (DVGW VP-601). Very good adhesion on concrete and many metals, PVC. Very easy application on both horizontal and vertical substrates. Swells up to 450% of its original volume in contact with water. Stays elastic after curing. Returns to its original shape after swelling. Applications: Water sealing pipeand cable penetrations. Water sealing concrete joints. Bonding of water swelling water stop tape onto rough surfaces. Directions for use: Method: caulking gun. Fill the penetration in the concrete structure on each side to 5cm deep using Soudal Aquaswell, according to the application Table (technical datasheet). For large penetrations PU backing rods Should be wrapped around the pipe in the centre of the concrete structure according to the application table. Application temperature: +1°C to +30°C Clean: with white spirit immediately after use. Finishing (optional): with a soapy solution or Soudal Finishing Solution before skin formation. Repair: with the same product. Remarks: In order to ensure the correct performance of the product, Soudal recommends a preliminary adhesion test. ds: dsc: kts: polyurethane joint sealant, swells on contact with water (310 ml) kpn: Aquaswell kpn_dash: kpn_clear: Aquaswell bkpn: SOUDAL Aquaswell bkpn_clear: SOUDAL Aquaswell c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 124715 sr_ns: SOUDAL124715
r: 02673876 p: 40.33 pid: 122087 b: SOUDAL q: 36 st: 1 lt: 1 ean: 5411183161283 sr: SOUDAL 145785 sr_no_br: 145785 sr_no_br_cl: 145785 sr_cl: SOUDAL145785 sr_dash: sold: 12260.32 p_range: none act: 1 avo: 1 av: Weight 4,5 kg Relative density 1 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight LQ air- and vapour-tight membrane black (4.5 kg) - 145785 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black (4.5 kg) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 145785 sr_ns: SOUDAL145785
r: 11990026 p: 4.244 pid: 107143 b: SOUDAL q: 224 st: 1 lt: 1 ean: 5411183408005 sr: SOUDAL 102668 sr_no_br: 102668 sr_no_br_cl: 102668 sr_cl: SOUDAL102668 sr_dash: sold: 4867.868 p_range: none type: standard act: 1 avo: 1 av: Net volume 310 ml EUH-statements EUH066 Relative density 1,005 ADR packing group III ADR class 3 Principal hazard property GHS02 Flammable UN number UN3295 Conseils de prudence (P) P101; P102; P210; P261; P271; P312; P405; P501 H-statements H226; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point >31 °C Packaging Cartridge Colour (manufacturer) Black n: SOUDAL Soudafalt bitumen-based jointing sealant black (310 ml) - 102668 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudafalt is a one-component ready to use joint sealant based on bitumen. Characteristics: Easy to apply Good adhesion on bituminous substrates Good adhesion on many substrates, even under water. Excellent slump resistance Applications: Joints with max. movement of 10% Repair product for leaks in roof elements, gutters and sewage pipes Cold adhesive for all types of roofing Emergency repairs, even in rainy weather Directions for use: Method: caulking gun Application temperature: +1°C to +30°C Clean: with white spirit immediately after use Finish: with soapy water before skinning Repair: Soudafalt ds: dsc: kts: bitumen-based jointing sealant black (310 ml) kpn: Soudafalt kpn_dash: kpn_clear: Soudafalt bkpn: SOUDAL Soudafalt bkpn_clear: SOUDAL Soudafalt c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Joint sealant sr_no_br_cl_ns: 102668 sr_ns: SOUDAL102668
r: 03213537 p: 40.33 pid: 122121 b: SOUDAL q: 0 st: lt: 9 ean: 5411183161269 sr: SOUDAL 145788 sr_no_br: 145788 sr_no_br_cl: 145788 sr_cl: SOUDAL145788 sr_dash: sold: 4194.32 p_range: none act: 1 avo: 1 av: Weight 4,5 kg Relative density 1 ADR packing group Packaging Bucket UN number ADR class EUH-statements EUH208; EUH210 Physical state Liquid n: SOUDAL Soudatight LQ air- and vapour-tight membrane white (4.5 kg) - 145788 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane white (4.5 kg) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 145788 sr_ns: SOUDAL145788
r: 02334475 p: 6.641 pid: 123447 b: SOUDAL q: 1 st: 1 lt: 1 ean: 5411183013568 sr: SOUDAL 105089 sr_no_br: 105089 sr_no_br_cl: 105089 sr_cl: SOUDAL105089 sr_dash: sold: 4170.548 p_range: none act: 1 avo: 1 av: Net volume 600 ml Relative density 1,4 ADR packing group ADR class EUH-statements EUH210; EUH212 UN number Physical state Solid Flash point >100 °C Packaging Cartridge Color Beige Colour (manufacturer) Beige n: SOUDAL Soudaseal 215Lm Da Beige hybrid facade joint sealant dark beige (600 ml sausage) - 105089 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MS-Polymer. Characteristics: Tested and conform to ISO 11600-F-25LM High bond strength on nearly all surfaces Excellent adhesion and extrudability, even in adverse conditions High performance mechanical properties Almost odourless No bubble formation within sealant, even in wet and humid conditions Primerless adhesion on many substrates (except where water pressure may occur) Colour stable and UV resistant Ecological advantages - free of isocyanates, solvents, halogens and acids Paintable with all water based paints (other systems should be tested) Excellent weather resistance in all climates Applications: Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames, Applications that should be painted with water based paints. Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Surface temperature: >+5°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 215 LM Remarks: Soudaseal 215LM may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Soudaseal 215 LM should not be used as a glazingsealant. ds: dsc: kts: hybrid facade joint sealant dark beige (600 ml sausage) kpn: Soudaseal 215Lm Da Beige kpn_dash: kpn_clear: Soudaseal215LmDaBeige bkpn: SOUDAL Soudaseal 215Lm Da Beige bkpn_clear: SOUDAL Soudaseal215LmDaBeige c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 105089 sr_ns: SOUDAL105089
r: 02334379 p: 6.641 pid: 121624 b: SOUDAL q: 8 st: 1 lt: 1 ean: 5411183013537 sr: SOUDAL 102291 sr_no_br: 102291 sr_no_br_cl: 102291 sr_cl: SOUDAL102291 sr_dash: sold: 2868.912 p_range: none act: 1 avo: 1 av: Net volume 600 ml Relative density 1,4 ADR packing group ADR class EUH-statements EUH210; EUH212 UN number Physical state Solid Flash point >100 °C Packaging Cartridge Color White Colour (manufacturer) White n: SOUDAL Soudaseal 215LM hybrid facade joint sealant white (600 ml sausage) - 102291 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MS-Polymer. Characteristics: Tested and conform to ISO 11600-F-25LM High bond strength on nearly all surfaces Excellent adhesion and extrudability, even in adverse conditions High performance mechanical properties Almost odourless No bubble formation within sealant, even in wet and humid conditions Primerless adhesion on many substrates (except where water pressure may occur) Colour stable and UV resistant Ecological advantages - free of isocyanates, solvents, halogens and acids Paintable with all water based paints (other systems should be tested) Excellent weather resistance in all climates Applications: Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames, Applications that should be painted with water based paints. Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Surface temperature: >+5°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 215 LM Remarks: Soudaseal 215LM may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Soudaseal 215 LM should not be used as a glazingsealant. ds: dsc: kts: hybrid facade joint sealant white (600 ml sausage) kpn: Soudaseal 215LM kpn_dash: kpn_clear: Soudaseal215LM bkpn: SOUDAL Soudaseal 215LM bkpn_clear: SOUDAL Soudaseal215LM c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 102291 sr_ns: SOUDAL102291
r: 02334121 p: 4.641 pid: 121775 b: SOUDAL q: 14 st: 1 lt: 1 ean: 5411183002913 sr: SOUDAL 104530 sr_no_br: 104530 sr_no_br_cl: 104530 sr_cl: SOUDAL104530 sr_dash: sold: 1656.837 p_range: none act: 1 avo: 1 av: Net volume 310 ml Relative density 1,353 ADR packing group ADR class EUH-statements EUH208; EUH210 UN number Physical state Liquid Packaging Cartridge Color White Colour (manufacturer) White n: SOUDAL Soudafill acrylic filler (310 ml) - 104530 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudafill is a high-quality, plasto-elastic one-component joint sealant based on acrylic dispersions. Characteristics: Easy to wash into cracks Can be painted over directly with masonry paint Can be painted over after curing Very good adhesion on many porous surfaces Applications: Sealing compound for cracks in concrete and plaster Joints between windowsills, between skirtingboard and floor, between brickwork, etc. Directions for use: Method: Apply the sealant, in case of repairing cracks in plaster or concrete, by means of a handheld or pneumatic caulking gun. Paint over Directly with masonry paint or smoothen with a wet Sponge. Apply the sealant, in case of sealing joints, by means of a handheld or pneumatic caulking gun. Smoothen the sealant with a filling-knife. Application temperature: +5°C to +30°C, do not apply when rain or frost are imminent Clean: Uncured Soudafill may be removed from tools with water. Cured sealant must be removed mechanically. Finishing: with soapy water Repair: with Soudafill Remarks: Do not use in applications where continuous water immersion is possible. Do not apply when rain or frost is imminent Soudafill can be painted over with most paints. The paint should be sufficiently elastic to be applied on a plasto- elastic sealant. A preliminary test is recommended. ds: dsc: kts: acrylic filler (310 ml) kpn: Soudafill kpn_dash: kpn_clear: Soudafill bkpn: SOUDAL Soudafill bkpn_clear: SOUDAL Soudafill c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 104530 sr_ns: SOUDAL104530
r: 02780960 p: 12.066 pid: 125160 b: SOUDAL q: 0 st: lt: 4 ean: 5411183129757 sr: SOUDAL 128138 sr_no_br: 128138 sr_no_br_cl: 128138 sr_cl: SOUDAL128138 sr_dash: sold: 1158.336 p_range: none act: 1 avo: 1 av: Net volume 310 ml Conseils de prudence (P) P101; P102; P210; P261; P271; P301 + P310 + P331; P312; P405; P501 ADR packing group III ADR class 3 UN number UN1139 EUH-statements EUH066 Principal hazard property GHS02 Flammable H-statements H226; H304; H336; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point 40 °C Packaging Cartridge Color Colourless Colour (manufacturer) Transparent n: SOUDAL Aluseal sealant for mitre joints (310 ml) - 128138 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: TRANSPARENT synthetic rubber based sealant coating for the protection of cut alumium window mitre joints. Non-aggressive to lacquers or coatings used in the fabrication of windows. Highly elastic and UV resistant. Compatible with window fabrication adhesives - Soudabond 641 and Soudabond 642. Can also be used with Tekna TK259 machine. Characteristics: Synthetic rubber sealant and coating for aluminium windows UV resistant Highly elastic Compatible with Soudabond 641 & 642 adhesives Can be used with Tekna TK259 machine Applications: Corrosion protection of cut alumium profiles (mitre joints) and general sealing (weather, water, air) of assembled aluminium windows. ds: dsc: kts: sealant for mitre joints (310 ml) kpn: Aluseal kpn_dash: kpn_clear: Aluseal bkpn: SOUDAL Aluseal bkpn_clear: SOUDAL Aluseal c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 128138 sr_ns: SOUDAL128138
r: 02098394 p: 6.27 pid: 123225 b: SOUDAL q: 13 st: 1 lt: 1 ean: 5411183036017 sr: SOUDAL 108264 sr_no_br: 108264 sr_no_br_cl: 108264 sr_cl: SOUDAL108264 sr_dash: sold: 1141.14 p_range: none act: 1 avo: 1 av: ADR packing group ADR class UN number EUH-statements EUH210 Physical state Liquid Packaging Cartridge Colour (manufacturer) Black Net volume 310 ml n: SOUDAL Firecement HT heat-resistant sealant, fully curing (310 ml) - 108264 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Firecement HT is a single component ready to use heat resistant sealant which cures to form a hard seal. It withstands temperatures of up to 1500°C. Characteristics: Heat resistant up to 1500°C Does not contain asbesto or other harmful components Hard setting Does not crumble or crack after cure Fire Rating of 120 minutes (Test Report 7830) Applications: Sealing of joints and openings at furnaces, heating systems, central heatings, barbecues, etc.Heat retardant sealing at existing constructions Directions for use: Method: caulking gun, spatula, trowel Application temperature: +5°C to +30°C Clean: with water Repair: with Firecement HT° Remarks: A slight heating up of the installation during 12 hours after application of the Firecement HT° will prevent the forming of bubbles and improve the sealant structure Do not apply in situations where constant water immersion is possible ds: dsc: kts: heat-resistant sealant, fully curing (310 ml) kpn: Firecement HT kpn_dash: kpn_clear: FirecementHT bkpn: SOUDAL Firecement HT bkpn_clear: SOUDAL FirecementHT c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 108264 sr_ns: SOUDAL108264
r: 01040529 p: 3.806 pid: 123203 b: SOUDAL q: 30 st: 1 lt: 1 ean: 5411183002906 sr: SOUDAL 100127 sr_no_br: 100127 sr_no_br_cl: 100127 sr_cl: SOUDAL100127 sr_dash: sold: 1069.486 p_range: none act: 1 avo: 1 av: Net volume 300 ml Relative density 1 ADR packing group ADR class EUH-statements EUH210 UN number Physical state Liquid Packaging Cartridge Color Black Colour (manufacturer) Black n: SOUDAL Calofer heat-resistant sealant stove sealant (300 ml) - 100127 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Calofer is a high quality sealing paste based which cures to form a hard joint which withstand temperatures of up to 1500°C Characteristics: Ready for use Does not crumble or crack after hardening Heat resistant until 1500°C Free of asbesto Applications: Sealing of joints and openings at high temperature areas Intallation of heating systems, furnaces, etc. Directions for use: Type: concrete, metal, bricks State of Surface: clean, free of dust and grease Preparation: slight moistening of the surface increases adhesion We recommend a preliminary compatibility test. ds: dsc: kts: heat-resistant sealant stove sealant (300 ml) kpn: Calofer kpn_dash: kpn_clear: Calofer bkpn: SOUDAL Calofer bkpn_clear: SOUDAL Calofer c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 100127 sr_ns: SOUDAL100127
r: 02334063 p: 7.616 pid: 124846 b: SOUDAL q: 0 st: lt: 5 ean: 5411183407053 sr: SOUDAL 104072 sr_no_br: 104072 sr_no_br_cl: 104072 sr_cl: SOUDAL104072 sr_dash: sold: 799.68 p_range: none act: 1 avo: 1 av: Net volume 310 ml Conseils de prudence (P) P101; P102; P210; P261; P271; P312; P405; P501 Relative density 1,1 ADR packing group ADR class Principal hazard property GHS02 Flammable EUH-statements EUH066 UN number H-statements H226; H336 Hazard class GHS02 Flammable; GHS07 Harmful or irritant Physical state Liquid Flash point 23-60 °C Packaging Cartridge Color Colourless Colour (manufacturer) Transparent n: SOUDAL Aquafix emergency repair kit transparent (310 ml) - 104072 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Solvent based plasto-elastic sealant that adheres onto most surfaces even when damp or under water. Ideal as an emergency repair product or as a general sealant where the job must be done even in the rain. Totally transparent. Easy to apply and tool. highly flexible. Applications: Sealing & bonding of all usual building substrates including polycarbonate, wood, metals, plastics, brick, concrete, MDF and glass. Emergency repair of active leaks. Technical details: Solvent based sealant Can be used on dry, damp and wet surfaces Multi-surface adhesion Highly elastic ds: dsc: kts: emergency repair kit transparent (310 ml) kpn: Aquafix kpn_dash: kpn_clear: Aquafix bkpn: SOUDAL Aquafix bkpn_clear: SOUDAL Aquafix c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 104072 sr_ns: SOUDAL104072
r: 02825981 p: 11.528 pid: 121913 b: SOUDAL q: 0 st: lt: 6 ean: 5411183135116 sr: SOUDAL 130545 sr_no_br: 130545 sr_no_br_cl: 130545 sr_cl: SOUDAL130545 sr_dash: sold: 415.008 p_range: none act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH210 Relative density 1,5 ADR packing group UN number ADR class Physical state Solid Flash point >100 °C Packaging Sausage n: SOUDAL Soudatight Hybrid membrane air- and impact-resistant (600 ml sausage) - 130545 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight Hybrid is the hybrid version of Soudatight and can be used for both indoor and outdoor applications. This product allows very easy and fast application of a liquid, airtight membrane to penetrations, connections and surfaces (no roof applications). Soudatight Hybrid can be applied as a crease with a flat brush or using a hand, battery or pneumatic sealant gun. With the Cox Jetflow 3 Sachet 600 spray gun, Soudatight Hybrid can be applied both as a crease and sprayed as a coating. Properties: For exterior applications (interior applications also possible) Very good adhesion to most substrates Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Solvent- and isocyanate-free Complies with GEV-EMICODE EC-1 PLUS: very low emission Can be painted over Applications: For the air- and watertight finishing of penetrations, connections, surfaces (no roof applications) and window connections such as the inside inner leaf (day side), the outside inner leaf (for installation of facade insulation), under the window sill, the outside solid walls and the outside ventilated facades. Instructions for use: Ensure that Soudatight Hybrid is at room temperature before use. Soudatight Hybrid is applied to the substrate directly from the packaging using a flat brush or sealant gun (hand, battery or pneumatic). Spread the airtightness paste undiluted and evenly with a (flat) brush to form a seamless film of at least 1 mm thick, to be applied in several layers. Soudatight Hybrid can also be applied with a pneumatic spray gun (Cox Jetflow 3 Sachet 600) as a bead or sprayed as a coating. By turning the spray tip, one has the choice between a crease and spray application (spray = more open = apply less product). When using the Cox Jetflow 3, spraying is optimal at 5 to 6 bar with the spray tip +/- 75% open. Even after spraying, always smooth with a (flat) brush and respect the minimum layer thickness. The application thickness should be measured (wet) with a thickness gauge. For window applications, ensure that the air and watertightness paste forms a seamless membrane of at least 10 mm on the window frame, over the flexible foam up to ± 5 cm on the night side of the shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after application of Soudatight Hybrid, before curing. Soudatight Hybrid can be removed from materials and tools with Soudal Surface Cleaner, White Spirit or Swipex, before curing has taken place. ds: dsc: kts: membrane air- and impact-resistant (600 ml sausage) kpn: Soudatight Hybrid kpn_dash: kpn_clear: SoudatightHybrid bkpn: SOUDAL Soudatight Hybrid bkpn_clear: SOUDAL SoudatightHybrid c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant sr_no_br_cl_ns: 130545 sr_ns: SOUDAL130545
r: 02334338 p: 6.641 pid: 124860 b: SOUDAL q: 2 st: 1 lt: 1 ean: 5411183013575 sr: SOUDAL 103011 sr_no_br: 103011 sr_no_br_cl: 103011 sr_cl: SOUDAL103011 sr_dash: sold: 391.819 p_range: none act: 1 avo: 1 av: Net volume 600 ml Relative density 1,4 ADR packing group ADR class EUH-statements EUH210; EUH212 UN number Physical state Solid Flash point >100 °C Packaging Cartridge Color Grey Colour (manufacturer) Natural stone n: SOUDAL Soudaseal 215LM hybrid natural stone facade joint sealant (600 ml sausage) - 103011 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudaseal 215LM is a high quality, neutral, elastic single component joint sealant based on MS-Polymer. Characteristics: Tested and conform to ISO 11600-F-25LM High bond strength on nearly all surfaces Excellent adhesion and extrudability, even in adverse conditions High performance mechanical properties Almost odourless No bubble formation within sealant, even in wet and humid conditions Primerless adhesion on many substrates (except where water pressure may occur) Colour stable and UV resistant Ecological advantages - free of isocyanates, solvents, halogens and acids Paintable with all water based paints (other systems should be tested) Excellent weather resistance in all climates Applications: Expansion and connection joints in the building industry: Sealing of joints in prefabricated buildings, movement joints in high rise constructions, sealing between window and door frames, Applications that should be painted with water based paints. Directions for use: Method: Manual- or pneumatic caulking gun Application temperature: +5°C until +35°C Surface temperature: >+5°C Cleaning: White Spirit or Surface Cleaner immediately after application and before curing Tooling: soapy solution before skin formation Repair with: Soudaseal 215 LM Remarks: Soudaseal 215LM may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Soudaseal 215 LM should not be used as a glazingsealant. ds: dsc: kts: hybrid natural stone facade joint sealant (600 ml sausage) kpn: Soudaseal 215LM kpn_dash: kpn_clear: Soudaseal215LM bkpn: SOUDAL Soudaseal 215LM bkpn_clear: SOUDAL Soudaseal215LM c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 103011 sr_ns: SOUDAL103011
r: 03213538 p: 6.735 pid: 125458 b: SOUDAL q: 0 st: lt: 4 ean: 5411183162617 sr: SOUDAL 146281 sr_no_br: 146281 sr_no_br_cl: 146281 sr_cl: SOUDAL146281 sr_dash: sold: 141.435 p_range: none act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 Relative density 1 ADR packing group UN number ADR class Physical state Liquid Packaging Sausage n: SOUDAL Soudatight LQ air- and vapour-tight membrane white (600 ml sausage) - 146281 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane white (600 ml sausage) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 146281 sr_ns: SOUDAL146281
r: 03213539 p: 6.735 pid: 122125 b: SOUDAL q: 0 st: lt: 6 ean: 5411183171541 sr: SOUDAL 154260 sr_no_br: 154260 sr_no_br_cl: 154260 sr_cl: SOUDAL154260 sr_dash: sold: 74.085 p_range: none act: 1 avo: 1 av: Net volume 600 ml EUH-statements EUH208; EUH210 Relative density 1 ADR packing group UN number ADR class Physical state Liquid Packaging Sausage n: SOUDAL Soudatight LQ air- and vapour-tight membrane black (600 ml sausage) - 154260 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Soudatight LQ is a high-quality fibre-reinforced polymer paste that, once dry, forms an air- and vapour-tight elastic membrane. Use Soudatight LQ for air- and vapour-tight sealing of penetrations, window, floor-wall, wall-ceiling and roof connections. The product can be applied very easily with a flat brush. Cracks up to 2 mm can easily be bridged thanks to the fibre reinforcement. Soudatight LQ changes colour when dry (= visual check). Properties: Air- and vapour-tight Fibre reinforced making it suitable for crack bridging up to 2 mm Very good adhesion to many porous materials Good adhesion on slightly damp substrates Permanently elastic after curing and very durable Can be painted over and plastered after drying Meets GEV-EMICODE EC-1 PLUS: very low emission Applications: For air- and vapour-tight finishing of penetrations, seams, gaps, cracks and openings, wall/floor connections, wall/ceiling connections and window connections such as inside inner leaf (day side) and outside inner leaf (for application of facade insulation). Instructions for use: Allow Soudatight LQ to reach room temperature before use. Shake or stir well before use. Soudatight LQ is applied to the substrate directly from the packaging using a flat brush. The product should be smeared/coated onto the substrate. Apply the airtightness paste undiluted and evenly in several layers (at least 2) to the substrate to a layer thickness of minimum 1 mm and maximum 3 mm. For best coverage, apply the product at a different angle the second time. It is recommended to apply the 2nd coat only after skin formation occurs with the first coat. The application thickness should be measured (wet) using a thickness gauge. For window applications ensure that the airtightness paste forms a seamless membrane of at least 3 mm on the window frame, over the flexible foam up to ± 5 cm on the day side of the building shell. The use of masking tape (on the window frame) is recommended. However, this should be removed shortly after the application of Soudatight LQ, before curing. For wall connections, ensure that the airtightness paste forms a seamless membrane of ± 15 cm on both surfaces. Before curing, Soudatight LQ can be removed from materials and tools with water. ds: dsc: kts: air- and vapour-tight membrane black (600 ml sausage) kpn: Soudatight LQ kpn_dash: kpn_clear: SoudatightLQ bkpn: SOUDAL Soudatight LQ bkpn_clear: SOUDAL SoudatightLQ c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 154260 sr_ns: SOUDAL154260
r: 08085235 p: 7.64 pid: 106244 b: SOUDAL q: 0 st: lt: 8 ean: 5411183011397 sr: SOUDAL 101838 sr_no_br: 101838 sr_no_br_cl: 101838 sr_cl: SOUDAL101838 sr_dash: sold: 0 p_range: none act: 1 avo: 1 av: Net volume 300 ml ADR packing group III ADR class 3 Colour (manufacturer) Grey Principal hazard property GHS02 Flammable UN number UN1263 Conseils de prudence (P) P101; P102; P210; P280; P303 + P361 + P353; P305 + P351 + P338; P312; P405; P501 H-statements H226; H315; H319; H332; H335; H373; H412 Hazard class GHS02 Flammable; GHS07 Harmful or irritant; GHS08 Health hazard Physical state Liquid Flash point 23-29 °C Color Grey n: SOUDAL Carsealer Gun sealant for sealing parts in bodywork (310 ml) - 101838 cn: SEALANT cn2: SEALANT cn_clear: SEALANT d: Product description: Seam sealant for body seams, Sprayable and ironable one-component seam sealant for sealing body seams. Very good resistance to oil and petrol. Paintable. Properties: Quick-drying, paintable sealing material Can be applied both horizontally and vertically Does not pull threads Resistant to water and mineral oil Permanently elastic seal Excellent adhesion Can be applied with airless spray equipment Can be applied in both narrow track form and wide layer Applications: For sealing bodywork seams such as metal overlaps, welding and sealing seams, in engine and trunk compartments, in doors and for various seam seals. Directions for use: Application method: With spray gun Cleaning agent: With White spirit immediately after use (not cured). ds: dsc: kts: sealant for sealing parts in bodywork (310 ml) kpn: Carsealer Gun kpn_dash: kpn_clear: CarsealerGun bkpn: SOUDAL Carsealer Gun bkpn_clear: SOUDAL CarsealerGun c_path: Home / Technical and chemical products / Adhesives and sealants / Adhesives and sealants / Sealant | Home / Our brands / Soudal / Soudal technical and chemical products / Soudal adhesives and sealants / Soudal adhesives and sealants / Soudal sealant | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Sealing compound sr_no_br_cl_ns: 101838 sr_ns: SOUDAL101838
