Silirub P2 is a high-quality neutral, elastic, universally overpaintable one-component joint sealant in accordance with ISO 11600 G 20 HM
Characteristics:
Very easy application
Dry toolable
Permanent colour, UV-resistant
Stays elastic after curing
Very good adhesion on many materials
Odourless
Can be overpainted with solventand waterbased paints
Applications:
Sealing of joints which must be overpainted
All glazing jobs
Directions for use:
Type: all usual surfaces, except PE, PP and PTFE
State of Surface: clean, dry, free of dust and grease
Preparation: porous surfaces in water loaded applications should be primered with Primer 150.
No primer required for non porous surfaces.
We recommend a preliminary compatibility test.
Remarks:
Paintability:
Because of de diversity of paints available we recommend to do compatibility tests before application
Please note that the sealant is elastic, most paints are not. Therefore the painted surface may crack in joints with large movement.Healthand Safety Recommendation:
Apply the usual industrial hygiene. Consult the label for more information.
Remarks: Not suitable for application on natural stone
Key features according to our expert
Net volume: 300 ml
Relative density: 0,98
ADR packing group: Not applicable
ADR class: Not applicable
Colour (manufacturer): Brown
EUH-statements: EUH208; EUH210
UN number: Not applicable
Physical state: Liquid
Flash point: >100 °C
Fire resistant: No
Packaging: Cartridge
RAL number: 8016
Supplemental hazard information
EUH208: Contains ... (see safety data sheet). May produce an allergic reaction.