Soudafoam X-TRA with is one-component, selfexpanding, ready-to-use polyurethane foam with CFC-free propellants, which are completely harmless to the ozone layer. In combination with the Soudal Mega Adapter the yield of cured flexible foam is increased by 75%. Due to the fact that there is virtually almost no expansion after extrusion "what you see is what you get"; therefore the application is much more efficient.
Characteristics:
Excellent stability (no shrink or post expansion)
Very good filling capacities
Excellent adhesion on most substrates (except Teflon, PE and PP)
High thermal and acoustical insulation values
Precision in application
No risk of jammed dooror window frames if substrates are properly moistened.
Applications:
Installation of windowand doorframes
Filling of cavities
Sealing of all openings in roof constructions
Creation of a soundproof screen
Mounting and sealing of windowand doorframes
Connecting insulation materials and roof constructions
Application of a soundproofing layer on motors
Improving thermal insulation in heating and cooling systems
Directions for use:
Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. The aerosol can can be used in all directions. Remove pressure from the applicator to stop. Fill holes and cavities for 80 %, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Foamcleaner or acetone. Cured foam can only be
Removed mechanically. Working temperature 5°C to 35°C. (20°C-25°C recommended)
Remarks:
Cured PU-foam must be protected from UVradiation by painting or applying a top layer of sealant (silicone, MS Polymer, acrylic and PU-sealant).