r: 02776763 p: 1.29 pid: 22015 b: FISCHER q: 0 st: lt: 4 ean: 4048962251463 sr: FISCHER 536863 sr_no_br: 536863 sr_no_br_cl: 536863 sr_cl: FISCHER536863 sr_dash: sold: 645 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Length 120 mm Max. useful length 65 mm n: FISCHER 536863 concrete screw FBS II 10x120 65/55/35 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x120 65/55/35 hexagon head kpn: 536863 kpn_dash: kpn_clear: 536863 bkpn: FISCHER 536863 bkpn_clear: FISCHER 536863 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536863 sr_ns: FISCHER536863
r: 03350111 p: 0.81 pid: 176722 b: SPIT q: 0 st: lt: 4 ean: 3439510586785 sr: SPIT 058678 sr_no_br: 058678 sr_no_br_cl: 058678 sr_cl: SPIT058678 sr_dash: sold: 405 p_range: none type: standard act: 1 avo: 1 av: n: SPIT 058678 TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 35 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Double threaded M8/M10 Ideal for supporting cables, pipes and fire protection systems Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Full thread up to the head for maximum performance in full concrete and canal plate 100% Made in Europe ds: dsc: kts: TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 35 mm kpn: 058678 kpn_dash: kpn_clear: 058678 bkpn: SPIT 058678 bkpn_clear: SPIT 058678 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058678 sr_ns: SPIT058678
r: 02776782 p: 2.78 pid: 20438 b: FISCHER q: 0 st: lt: 5 ean: 4048962251555 sr: FISCHER 536872 sr_no_br: 536872 sr_no_br_cl: 536872 sr_cl: FISCHER536872 sr_dash: sold: 278 p_range: none type: standard act: 1 avo: 1 av: Diameter 12 mm Max. useful length 70 mm Length 130 mm n: FISCHER 536872 concrete screw FBS II 12x130 70/55/30 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 12x130 70/55/30 hexagon head kpn: 536872 kpn_dash: kpn_clear: 536872 bkpn: FISCHER 536872 bkpn_clear: FISCHER 536872 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536872 sr_ns: FISCHER536872
r: 03350115 p: 1.02 pid: 176734 b: SPIT q: 0 st: lt: 4 ean: 3439510586792 sr: SPIT 058679 sr_no_br: 058679 sr_no_br_cl: 058679 sr_cl: SPIT058679 sr_dash: sold: 204 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 55 mm n: SPIT 058679 TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 55 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Double threaded M8/M10 Ideal for supporting cables, pipes and fire protection systems Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Full thread up to the head for maximum performance in full concrete and canal plate 100% Made in Europe ds: dsc: kts: TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 55 mm kpn: 058679 kpn_dash: kpn_clear: 058679 bkpn: SPIT 058679 bkpn_clear: SPIT 058679 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058679 sr_ns: SPIT058679
r: 02776762 p: 1.2 pid: 22011 b: FISCHER q: 250 st: 1 lt: 1 ean: 4048962251456 sr: FISCHER 536862 sr_no_br: 536862 sr_no_br_cl: 536862 sr_cl: FISCHER536862 sr_dash: sold: 180 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 45 mm Length 100 mm n: FISCHER 536862 concrete screw FBS II 10x100 45/35/15 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x100 45/35/15 hexagon head kpn: 536862 kpn_dash: kpn_clear: 536862 bkpn: FISCHER 536862 bkpn_clear: FISCHER 536862 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536862 sr_ns: FISCHER536862
r: 02776758 p: 1.11 pid: 20703 b: FISCHER q: 0 st: lt: 8 ean: 4048962251432 sr: FISCHER 536860 sr_no_br: 536860 sr_no_br_cl: 536860 sr_cl: FISCHER536860 sr_dash: sold: 166.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 25 mm Length 80 mm n: FISCHER 536860 concrete screw FBS II 10x80 25/15/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x80 25/15/- hexagon head kpn: 536860 kpn_dash: kpn_clear: 536860 bkpn: FISCHER 536860 bkpn_clear: FISCHER 536860 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536860 sr_ns: FISCHER536860
r: 02756814 p: 1.63 pid: 21482 b: SPIT q: 0 st: lt: 7 ean: 3439510587447 sr: SPIT 058744 sr_no_br: 058744 sr_no_br_cl: 058744 sr_cl: SPIT058744 sr_dash: sold: 163 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 120 mm n: SPIT 058744 TAPCON XTREM HFL concrete screw 10x120/65-35 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 10x120/65-35 kpn: 058744 kpn_dash: kpn_clear: 058744 bkpn: SPIT 058744 bkpn_clear: SPIT 058744 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058744 sr_ns: SPIT058744
r: 02757561 p: 1.41 pid: 21517 b: SPIT q: 1150 st: 1 lt: 1 ean: 3439510587423 sr: SPIT 058742 sr_no_br: 058742 sr_no_br_cl: 058742 sr_cl: SPIT058742 sr_dash: sold: 141 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 90 mm n: SPIT 058742 TAPCON XTREM HFL concrete screw 10x90/35-5 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 10x90/35-5 kpn: 058742 kpn_dash: kpn_clear: 058742 bkpn: SPIT 058742 bkpn_clear: SPIT 058742 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058742 sr_ns: SPIT058742
r: 02776795 p: 2.97 pid: 21325 b: FISCHER q: 0 st: lt: 8 ean: 4048962251586 sr: FISCHER 536875 sr_no_br: 536875 sr_no_br_cl: 536875 sr_cl: FISCHER536875 sr_dash: sold: 118.8 p_range: none type: standard act: 1 avo: 1 av: Diameter 14 mm Max. useful length 30 mm Length 95 mm n: FISCHER 536875 concrete screw FBS II 14x95 30/10/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 14x95 30/10/- hexagon head kpn: 536875 kpn_dash: kpn_clear: 536875 bkpn: FISCHER 536875 bkpn_clear: FISCHER 536875 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536875 sr_ns: FISCHER536875
r: 02776755 p: 1.02 pid: 22090 b: FISCHER q: 0 st: lt: 8 ean: 4048962251418 sr: FISCHER 536858 sr_no_br: 536858 sr_no_br_cl: 536858 sr_cl: FISCHER536858 sr_dash: sold: 102 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Length 60 mm Max. useful length 5 mm n: FISCHER 536858 concrete screw FBS II 10x60 5/- hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x60 5/- hexagon head kpn: 536858 kpn_dash: kpn_clear: 536858 bkpn: FISCHER 536858 bkpn_clear: FISCHER 536858 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536858 sr_ns: FISCHER536858
r: 02756806 p: 0.98 pid: 20165 b: SPIT q: 2250 st: 1 lt: 1 ean: 3439510587355 sr: SPIT 058735 sr_no_br: 058735 sr_no_br_cl: 058735 sr_cl: SPIT058735 sr_dash: sold: 98 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 70 mm n: SPIT 058735 TAPCON XTREM HFL concrete screw 8x70/25-5 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 8x70/25-5 kpn: 058735 kpn_dash: kpn_clear: 058735 bkpn: SPIT 058735 bkpn_clear: SPIT 058735 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058735 sr_ns: SPIT058735
r: 03072606 p: 0.31 pid: 176143 b: FISCHER q: 0 st: lt: 8 ean: 4048962329483 sr: FISCHER 546390 sr_no_br: 546390 sr_no_br_cl: 546390 sr_cl: FISCHER546390 sr_dash: sold: 93 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 40 mm n: FISCHER 546390 concrete screw FBS II 6x40/5 hexagon head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer concrete screw UltraCut FBS II 6 US is made of zinc-plated steel with a hexagonal head and pressed washer. The UltraCut FBS II 6 US is perfectly designed for applications like fixings of pipe routes, channel systems, ventilation ducts and facilities in the building service engineering. When the concrete screw is screwed into the drill hole using an impact driver, the thread flanks cut deep into the concrete, thus ensuring top load-bearing capacity. The low drilling effort saves time in the case of multiple fixations. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates The first concrete screw with diameter 6 and variable embedment depths enables high flexibility and a precise adaption on the loads The ETA assessment option 1 includes the use in cracked and non-cracked concrete for highest safety requirements The first 6 mm diameter concrete screw with an ETA assessment for the C1 seismic performance category for additional safety standards The UltraCut FBS II 6 is approved for multiple use of non-load bearing systems and thereby ideal for the installation of pipe routes, cable trays and prestressed hollow concrete ceilings Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Different head designs offer a maximum of flexibility and a perfect adaptation to the application The hexagonal head with pressed washer and ribs under the head prevent accidental loosening of the anchor making the system more secure The special head geometry for use in mounting rails with a socket (SW10) enables simple installation of the add-on part The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The concrete screw UltraCut FBS II 6 offers the possibility for use in masonry (solid building material) The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II 6 is recommended for the push-through and pre-positioned installation We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Prestressed hollow concrete ceilings C30/37 to C50/60 for the multiple use of non-load bearing systems Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Masonry with a dense structure Solid building materials Application Pipeline routes Suspension for individual pipes Suspended mounting rails Prestressed concrete hollow core ceilings Cable trays Ventilation ducts Perforated tapes ds: dsc: kts: concrete screw FBS II 6x40/5 hexagon head kpn: 546390 kpn_dash: kpn_clear: 546390 bkpn: FISCHER 546390 bkpn_clear: FISCHER 546390 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 546390 sr_ns: FISCHER546390
r: 02776747 p: 0.88 pid: 22088 b: FISCHER q: 0 st: lt: 4 ean: 4048962251364 sr: FISCHER 536853 sr_no_br: 536853 sr_no_br_cl: 536853 sr_cl: FISCHER536853 sr_dash: sold: 88 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 30 mm Length 80 mm n: FISCHER 536853 concrete screw FBS II 8x80 30/15 hexagon head with TX recess cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x80 30/15 hexagon head with TX recess kpn: 536853 kpn_dash: kpn_clear: 536853 bkpn: FISCHER 536853 bkpn_clear: FISCHER 536853 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536853 sr_ns: FISCHER536853
r: 02756805 p: 1.52 pid: 20194 b: SPIT q: 0 st: lt: 5 ean: 3439510587393 sr: SPIT 058739 sr_no_br: 058739 sr_no_br_cl: 058739 sr_cl: SPIT058739 sr_dash: sold: 76 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 140 mm n: SPIT 058739 TAPCON XTREM HFL concrete screw 8x140/95-75 cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description Self-tapping screw with hexagonal head for fastening in cracked and non-cracked concrete and for seismic applications ETA seismically approved, fire tested, leading concrete anchor with excellent performance The full ETA Option 1 range can be used in cracked and non-cracked concrete TAPCON XTREM range for use in C1 seismic zones Fire certificate Longer effective thread ensures the best performance on the market New patented thread design for easy installation Adjustable plug for situations requiring alignment without loss of performance Removable anchor for temporary fixing Wide choice of drill diameters, heads and lengths Removable anchor for temporary fixing 3 anchoring depths for Ø8 to Ø14 Applications Pipes Suspended elements on ceiling or wall Pull and pressure braces Suspended ceiling Temporary fixings Scaffolding Signposting Safety barriers Stadium seating Pallet racks Mechanical and electrical installations Cable ducts Window frames Railings HVAC ds: dsc: kts: TAPCON XTREM HFL concrete screw 8x140/95-75 kpn: 058739 kpn_dash: kpn_clear: 058739 bkpn: SPIT 058739 bkpn_clear: SPIT 058739 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058739 sr_ns: SPIT058739
r: 02776728 p: 0.74 pid: 21999 b: FISCHER q: 0 st: lt: 5 ean: 4048962251340 sr: FISCHER 536851 sr_no_br: 536851 sr_no_br_cl: 536851 sr_cl: FISCHER536851 sr_dash: sold: 74 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Length 55 mm Max. useful length 5 mm n: FISCHER 536851 concrete screw FBS II 8x55 5/- hexagon head with TX shank cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x55 5/- hexagon head with TX shank kpn: 536851 kpn_dash: kpn_clear: 536851 bkpn: FISCHER 536851 bkpn_clear: FISCHER 536851 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536851 sr_ns: FISCHER536851
r: 02776809 p: 1.39 pid: 22108 b: FISCHER q: 0 st: lt: 10 ean: 4048962251708 sr: FISCHER 536887 sr_no_br: 536887 sr_no_br_cl: 536887 sr_cl: FISCHER536887 sr_dash: sold: 69.5 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Max. useful length 45 mm Length 100 mm n: FISCHER 536887 concrete screw FBS II 10x100 45/35/15 countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 10x100 45/35/15 countersunk head kpn: 536887 kpn_dash: kpn_clear: 536887 bkpn: FISCHER 536887 bkpn_clear: FISCHER 536887 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536887 sr_ns: FISCHER536887
