Choose your filter
Filter
Categories
Brand
Stocked items only
Price excl. VAT
to €
Wire dimension
Drilling diameter
Drill hole depth
Anchoring depth
Length
Effective length
Width across flats
Fire safety ERROR
Dished mortar
Material
Drill diameter
Key width
Max. attachment thickness
Wire
Thread size (metric)
With mortar pattern
Terms of use
Min. anchoring depth

Buy a Gift Card

Gift Card

Anchor rods for anchoring in concrete and masonry

An anchor rod is the threaded rod that is anchored into concrete with chemical mortar or a mechanical cone, and onto which the structure is then fixed. It is the connection for heavy fixing: steelwork on a foundation, brackets, pipe clamps, machine feet and facade anchors. The load capacity does not come from the rod alone, but from the combination of rod, substrate, hole and anchoring medium. Start with the substrate.

Cracked concrete, uncracked concrete, masonry and hollow block each ask for a different approach, and the approval of a system always applies to that specific combination. Then choose the diameter and embedment depth on the calculated tensile and shear load, with common sizes from M8 to M16 and rod lengths around 110 to 190 mm. Take stainless steel as soon as the connection sits outdoors, hangs in a damp room or is exposed to de-icing salt.

Drill the hole to the specified diameter and depth and clean it thoroughly, because leftover drilling dust is the most common reason an anchor falls short of its stated value. For mechanical fixing, look at anchor bolt, and for the resin at injection mortar.

⚠️
Connection lost
Oops! It looks like you lost your connection. Page was automaticaly reload.