TEC7 535308000 all purpose slimmer grey RAL 7004 in sausage (600 ml)

Name: TEC7 535308000 all purpose slimmer grey RAL 7004 in sausage (600 ml)
Brand: TEC7
SKU: 02042527
Price: 16.6 EUR
Availability: PreOrder

From 12 piece €16.60

From 24 pieces €14.94 - €39.84 saving

From 36 pieces €14.11 - €89.64 saving

16.60 tax incl.

€13.72 excl. VAT (incl. all environmental contributions)

TEC7 535308000 all purpose slimmer grey RAL 7004 in sausage (600 ml)

€16.60

On order: delivered from 02/06/2026

each

The minimum purchase order quantity for the product is 12.

Ordered before 20:00 - delivered as of 02/06/2026
Free shipping
Delivery by DHL
Delivered from Belgium

Product information
Additional info

Product description

SEAL, BOND AND ASSEMBLE EVERYTHING

Unique adhesion to almost all materials
Very high bonding strength
Fast strength build-up
Cures up to -10°C
Highest class in mould resistance
Unique adhesion on difficult materials
On dry and wet substrates
Permanently elastic over the long term
Highly UV-resistant and colourfast for indoor and outdoor use
Safe on mirrors and insulation materials, no marking on natural stone
Free of isocyanates, solvents and phthalates
Water- and airtight

Instructions

Processing temperature between -10°C and +40°C. At temperatures below 0°C, curing will be greatly delayed
Apply on clean, stable, dust- and grease-free substrates
Use Tec7 Prepare & Finish for safe cleaning and a perfect finish
In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
Test the adhesion on plastics, powder paints, exotic woods and bituminous materials
Reinforce weak and/or porous substrates first with Poxy Primer
PT7 primer ensures optimal adhesion to difficult (LSE) plastics and powder coatings
Tec7 cures through a reaction with (air) moisture
Use Tec7 in lines, not in thick dots. Dots will cure much more slowly
When used between two airtight materials, it is recommended to moisten one of the surfaces very slightly
Use vertical glue strips to avoid moisture and dust accumulation
Ideal adhesive thickness: 0.5 mm to 3 mm
Thinner layers = higher strength, Thicker layers = higher elasticity
Paintable after skin formation
Do not use with alkyd-based lacquers and paints
Use Tec7 Cleaner and/or Tec7 Powerwipes for cleaning tools and/or removing uncured Tec7. Clean hands and skin with Tec7 Powerwipes. Cured Tec7 can only be removed by mechanical means. The last residues can be removed with Remove All if the substrate can withstand it.