Heavy-duty fastening with TEC7 Anchor
- High strength structural anchoring: You achieve a reliable, expansion-free bond in solid or hollow materials that cures stronger than the base substrate.
- Reliable performance underwater: You apply this two-component vinylester mortar seamlessly on wet surfaces and submerged areas across extreme temperatures.
- Safe for indoor applications: The styrene-free and phthalate-free formulation lets you complete secure indoor fastenings without harsh chemical odors.
With TEC7 Anchor, you securely fasten heavy structural loads into solid and hollow substrates including concrete, aerated concrete, brick, and natural stone. This two-component vinyl ester mortar cures without shrinkage and without expansion stress, allowing you to anchor close to structural edges without cracking the surrounding masonry. It adheres reliably to wet surfaces and even underwater, delivering a durable bond that cures stronger than the base material itself. The styrene-free and phthalate-free formula ensures safe, low-odour application inside enclosed spaces. You can dispense the 280 ml cartridge easily using a standard cartridge gun and static mixing nozzle, using sieve sleeves in hollow materials.
Product description
CHEMICAL ANCHOR
- For concrete, solid and hollow stone
- Free of styrene and phthalates
- Also under water
- From -10°C
- Anchor is a 2-component chemical anchor based on styrene-free vinylester resins in a standard pattern, sprayable with a Tec Gun
- The mixing of the two components is achieved by using static mixing tips
- The unique combination of fast curing, wide application margins and physical properties make it a unique chemical anchor in the professional market
- For effective fixing and assembly in all building materials, such as concrete, solid and hollow brick, aerated concrete, etc.
- Anchor withstands high forces and can be used on wet surfaces, even under water,
- at temperatures from -10°C to +40°C. After fast curing, Anchor is stronger than the substrate:
- Without shrinkage, thus reliable and without expansion, thus low stress
- Safe, environmentally friendly and user-friendly
- Can also be used indoors: styrene-free, phthalate-free, low-odour
- Due to its exceptionally high UV and chemical resistance, even against chlorinated and salt water, Anchor can be used in aggressive environments
- Anchor is dimensionally stable and can also be used overhead in holes in the ceiling Very long shelf life, even if the tube is opened and used
Instructions
- Drill a hole with the correct diameter (see diagram)
- Remove dust from the drill hole with a brush, pump or compressed air
- Place Anchor in a Tec Gun, open the cartridge at the top with a knife and attach the mixer tip
- Spray out about 10 cm to mix the two components correctly
- For solid brick: fill the borehole from back to front
- For hollow stone: use a Harpoon plug and fill it with Anchor
- Insert the threaded rod with a twisting motion
- Remove any excess product
- Anchor can be used in temperatures down to -10°C, as long as the cartridge is at room temperature (+15°C)
- The cartridge can be stored after use sealed with the protective screw cap