Which substrates is Tec7 PT7 suitable for?

It is suitable for difficult plastics like PP, ABS, EPDM, and PA, as well as powder coatings and painted surfaces.

Is this primer suitable for bare metals?

No, this adhesion primer provides no added value on bare metals.

What is the drying time of Tec7 PT7?

Apply a thin layer and allow it to dry for 10 minutes at 20°C before continuing work.

Does this primer leave stains or marks?

No, this transparent polyolefin-based primer leaves no marks or stains.

What can you apply after using this primer?

After drying, you can bond with MS polymers or silicones, apply tapes, or paint and spray the surface.

TEC7 PT7 adhesive primer transparent (aerosol 200 ml) - 590921000

Name: TEC7 PT7 adhesive primer transparent (aerosol 200 ml) - 590921000
Brand: TEC7
SKU: 02786130
Price: 10.12 EUR
Availability: PreOrder

Supplier number: TEC7 590921000 | EAN 5414195003152

From 6 piece €10.12

From 12 pieces €9.10 - €12.14 saving

From 18 pieces €8.60 - €27.31 saving

10.12 tax incl.

€8.36 excl. VAT (incl. all environmental contributions)

On order: delivered from 06/10/2026

The minimum purchase order quantity for the product is 6.

Ordered before 20:00 - delivered as of 06/10/2026
Shipping costs €11.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL
Delivered from Belgium

↓ Documents (2) ✆ Talk to a specialist

Strong surface prep with TEC7 PT7

Practical benefits

Bonding on difficult materials: You significantly increase adhesion on challenging plastics such as PP, ABS, EPDM, and powder-coated surfaces.
Clean and invisible finish: The transparent formula leaves no marks or stains beneath your adhesives, sealants, tapes, or paint coatings.
Fast ten minute drying: After spraying a thin layer, you can proceed with bonding or painting after 10 minutes of drying.

In a nutshell

The right choise for

With the TEC7 PT7 adhesion primer, you create a dependable foundation for demanding bonding and painting tasks. This transparent primer in a 200 ml spray significantly improves adhesion on difficult plastics such as PP, ABS, PA, and EPDM, as well as on powder-coated and painted surfaces. Its colorless polyolefin-based formula leaves no marks or stains, ensuring a neat and invisible finish beneath your work. After spraying a thin layer, it dries in approximately 10 minutes at 20°C. You can then immediately proceed with bonding using ms polymers or silicones, applying tape, or painting.

Product information FAQ

€10.12

tax incl.

Key features according to our expert

Color: Colourless
P-statements: P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501
ADR packing group: Not applicable
ADR class: 2
UN number: UN1950
Principal hazard property: GHS02 Flammable
EUH-statements: EUH208
H-statements: H222; H229; H315; H336; H411
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard
Physical state: Aerosol
Packaging: Spray
Net volume: 200 ml

Product description

TRANSPARENT ADHESION PRIMER

For gluing and painting on difficult materials
Significantly increases adhesion on difficult materials such as powder coatings, painted surfaces, plastics such as ABS, EPDM, PP, ...
Leaves no traces or stains
For bonding with MS polymers, silicones and tapes as well as for lacquering and spraying
No added value on bare metals

Instructions

After releasing the mixing ball, shake well before use
Apply to clean substrate
If necessary, clean with Tec7 Cleaner and/or Multiclean, and wipe or blow dry
Apply a thin layer and allow to dry for 10 minutes at 20°C
Further processing (gluing, taping, varnishing)
Always do an adhesion test: each glue or sealant in combination with this primer may give a different result
After use, empty the can upside down

Precautionary statements

P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P405: Store locked up.
P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.
P501: Dispose of contents/container to ... (see safety data sheet).

Hazard statements

H222: Extremely flammable aerosol.
H229: Pressurised container: May burst if heated.
H315: Causes skin irritation.
H336: May cause drowsiness or dizziness.
H411: Toxic to aquatic life with long lasting effects.

Supplemental hazard information

EUH208: Contains ... (see safety data sheet). May produce an allergic reaction.

Documents

⤓ Technical data sheet PDF ⤓ Safety sheet PDF

All Features

Color: Colourless
P-statements: P101; P102; P210; P211; P251; P280; P405; P410 + P412; P501
Adr packing group: Not applicable
Adr class: 2
Un number: UN1950
Principal hazard property: GHS02 Flammable
Euh-statements: EUH208
H-statements: H222; H229; H315; H336; H411
Hazard class: GHS02 Flammable; GHS07 Harmful or irritant; GHS09 Environmental hazard
Physical state: Aerosol
Packaging: Spray
Net volume: 200 ml

Brand TEC7
02786130
EAN 5414195003152
Supplier number TEC7 590921000

Frequently asked questions about this product

Answered by specialists

Which substrates is Tec7 PT7 suitable for?: It is suitable for difficult plastics like PP, ABS, EPDM, and PA, as well as powder coatings and painted surfaces.
Is this primer suitable for bare metals?: No, this adhesion primer provides no added value on bare metals.
What is the drying time of Tec7 PT7?: Apply a thin layer and allow it to dry for 10 minutes at 20°C before continuing work.
Does this primer leave stains or marks?: No, this transparent polyolefin-based primer leaves no marks or stains.
What can you apply after using this primer?: After drying, you can bond with MS polymers or silicones, apply tapes, or paint and spray the surface.