Product description
EXTREME MOUNTING WITHOUT SUPPORT
- Extreme initial tack
- Vibration and impact resistant
- Also on wet substrates
- Perfect for vertical applications
- Super strong before curing: 600kg/m²
- Stable in adhesive thicknesses up to 40 mm
- Permanently elastic
- Free of phthalates, solvents and isocyanates
- Safe on mirrors, no marking on natural stone
- Almost odourless
- Also on damp, smooth surfaces
- Mould- and bacteria-resistant
- Water- and airtight
- Can be used on most building materials
Instructions
- Application temperature between -10°C and +40°C
- Apply to clean, dust- and grease-free substrates
- Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
- Apply with hand or air pistol (best with telescopic piston)
- Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended
- Test adhesion to plastics, powdered paints, exotic woods and bituminous materials
- Reinforce weak and/or porous substrates first with Poxy Primer
- Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay
- When bonding mirrors in sanitary facilities, only apply vertical bonding strips to avoid stagnating moisture caused by condensation
- When bonding mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnating moisture caused by condensation.
- The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, i.e. DO NOT TAPE DOWN
- When applying, position the nozzle vertically on the surface
- Easiest to spray with the Tec7 Multigun
- The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots)