r: 02833893 p: 10.247 pid: 41947 b: WERA q: 0 st: lt: 12 ean: 4013288172754 sr: WERA 05024358001 sr_no_br: 05024358001 sr_no_br_cl: 05024358001 sr_cl: WERA05024358001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size TT40 With handle No Handle type Overall length 132 mm Width 27 mm Drive (pin key) Torx Tamper Resistant n: WERA 967 SPKL TORX BO Multicolour socket spanner, TX 40 x 132 mm - 05024358001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-keys with finger-protecting plastic sleeves. This means they are ergonomic and pleasant to grip even in cold temperatures. At one end a TORX® BO profile: the bore hole in the bit and safety pin in the TORX® BO screw prevents any unauthorised loosening. Tamperproof fastening! The ballpoint on the long arm allows dependable working on TORX® screws even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-key for TORX® socket screws with safety pin TORX® ballpoint on the long arm Colour coded, easy-to-grip plastic sleeve, even at low temperatures Wear-resistant size marking BlackLaser for high corrosion protection and long service life Application TORX® socket screws with and without pin (BO = bore hole) Design BlackLaser, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, TORX® ball end on long arm Features and benefits L-key for TORX® socket screws with safety pin L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SPKL TORX® BO L-key Multicolour, TX 40 x 132 mm kts: socket spanner, TX 40 x 132 mm kpn: 967 SPKL TORX BO Multicolour kpn_dash: kpn_clear: 967SPKLTORXBOMulticolour bkpn: WERA 967 SPKL TORX BO Multicolour bkpn_clear: WERA 967SPKLTORXBOMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024358001 sr_ns: WERA05024358001
r: 02831666 p: 10.247 pid: 42840 b: WERA q: 0 st: lt: 12 ean: 4013288138408 sr: WERA 05028071001 sr_no_br: 05028071001 sr_no_br_cl: 05028071001 sr_cl: WERA05028071001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T25 Blade length 300 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX HF screwdriver with holding function, TX 25 x 300 mm - 05028071001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. With holding function: The clamping force resulting from the seating stress between the tip and the screw profile keeps the screws securely on the tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Handles marked for easy identification and sorting of tools. Screwdriver for recessed TORX® screws Holding function for TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Intellectual Properties specifications, chrome-plated Handle Kraftform with non-roll feature, multi-component Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 367 TORX® HF Screwdriver with holding function for TORX® screws, TX 25 x 300 mm kts: screwdriver with holding function, TX 25 x 300 mm kpn: 367 TORX HF kpn_dash: kpn_clear: 367TORXHF bkpn: WERA 367 TORX HF bkpn_clear: WERA 367TORXHF c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028071001 sr_ns: WERA05028071001
r: 02832087 p: 10.23 pid: 4890 b: WERA q: 0 st: lt: 8 ean: 4013288101006 sr: WERA 05060406001 sr_no_br: 05060406001 sr_no_br_cl: 05060406001 sr_cl: WERA05060406001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 11 mm Type of drive profile (socket) Hexagonal Shank type External hexagon Length 50 mm n: WERA 869/4 cap bit 11 x 50 mm - 05060406001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Metric nutsetter for hexagon head screws. Non-magnetic design. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Non-magnetic design 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic Features and benefits Non-magnetic nutsetters that do not attract metal filings. ds: dsc: Scope of delivery 869/4 Nutsetters, 11 x 50 mm kts: cap bit 11 x 50 mm kpn: 869/4 kpn_dash: kpn_clear: 8694 bkpn: WERA 869/4 bkpn_clear: WERA 8694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060406001 sr_ns: WERA05060406001
r: 02832090 p: 10.23 pid: 4315 b: WERA q: 0 st: lt: 8 ean: 4013288101013 sr: WERA 05060407001 sr_no_br: 05060407001 sr_no_br_cl: 05060407001 sr_cl: WERA05060407001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 12 mm Type of drive profile (socket) Hexagonal Shank type External hexagon Length 50 mm n: WERA 869/4 cap bit 12 x 50 mm - 05060407001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Metric nutsetter for hexagon head screws. Non-magnetic design. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Non-magnetic design 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Non-magnetic Features and benefits Non-magnetic nutsetters that do not attract metal filings. ds: dsc: Scope of delivery 869/4 Nutsetters, 12 x 50 mm kts: cap bit 12 x 50 mm kpn: 869/4 kpn_dash: kpn_clear: 8694 bkpn: WERA 869/4 bkpn_clear: WERA 8694 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060407001 sr_ns: WERA05060407001
r: 08103793 p: 10.22 pid: 70411 b: WERA q: 0 st: lt: 8 ean: 4013288227317 sr: WERA 05005510001 sr_no_br: 05005510001 sr_no_br_cl: 05005510001 sr_cl: WERA05005510001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 19 mm Type of drive profile (socket) Hexagonal Connection size 3/8" Length 30 mm n: WERA 8790 B Impaktor cap with 3/8" drive, 19 x 30 mm - 05005510001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 19 x 30 mm kts: Impaktor cap with 3/8" drive, 19 x 30 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005510001 sr_ns: WERA05005510001
r: 08108062 p: 10.21 pid: 159626 b: WERA q: 0 st: lt: 8 ean: 4013288228840 sr: WERA 05006541001 sr_no_br: 05006541001 sr_no_br_cl: 05006541001 sr_cl: WERA05006541001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Torx Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip T20 Drive profile size (bit) 20 Product Range Wera Kraftform Kompakt n: WERA 05006541001 Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for TORX® screws Reduced shaft diameter and integrated insulation protection Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application TORX® screws Blade Reduced blade diameter with integrated protective insulation, low lying TORX® screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE 67 iS TORX® Take it easy, TX 20 x 157 mm kts: Kraftform Kompakt VDE insert for TORX screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006541001 kpn_dash: kpn_clear: 05006541001 bkpn: WERA 05006541001 bkpn_clear: WERA 05006541001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006541001 sr_ns: WERA05006541001
r: 02818578 p: 10.18 pid: 44540 b: WERA q: 0 st: lt: 12 ean: 4013288105547 sr: WERA 05160899001 sr_no_br: 05160899001 sr_no_br_cl: 05160899001 sr_cl: WERA05160899001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 R PH bit Phillips with reduced shank, PH 2 x 50 mm - 05160899001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws With reduced shaft diameter Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Reduced shaft diameter Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery 851/4 R Reduced tip bits, PH 2 x 50 mm kts: bit Phillips with reduced shank, PH 2 x 50 mm kpn: 851/4 R PH kpn_dash: kpn_clear: 8514RPH bkpn: WERA 851/4 R PH bkpn_clear: WERA 8514RPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05160899001 sr_ns: WERA05160899001
r: 03228587 p: 10.16 pid: 71686 b: WERA q: 0 st: lt: 12 ean: 4013288193742 sr: WERA 05024458001 sr_no_br: 05024458001 sr_no_br_cl: 05024458001 sr_cl: WERA05024458001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T30 With handle No Handle type Overall length 195 mm Width 37 mm Drive (pin key) Torx n: WERA 967 XL HF TORX socket spanner with holding function, long, TX 30 x 195 mm - 05024458001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 967 XL TORX® HF TORX® L-key with holding function, long, TX 30 x 195 mm kts: socket spanner with holding function, long, TX 30 x 195 mm kpn: 967 XL HF TORX kpn_dash: kpn_clear: 967XLHFTORX bkpn: WERA 967 XL HF TORX bkpn_clear: WERA 967XLHFTORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024458001 sr_ns: WERA05024458001
r: 02094540 p: 10.12 pid: 42839 b: WERA q: 0 st: lt: 12 ean: 4013288003843 sr: WERA 05022905001 sr_no_br: 05022905001 sr_no_br_cl: 05022905001 sr_cl: WERA05022905001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size HEX 5/32" Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon n: WERA 352 hexagonal ball head screwdriver, 5/32" x 100 mm - 05022905001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Hexagonal ballpoint screwdriver Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal blade and ballpoint for secure working even in difficult installation situations The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Hexagon socket screws Blade Hexagonal Design Ball end hexagon, chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, sizes W/F 12.0, W/F 1/2": Kraftform with non-roll feature, single-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The hexagonal non-roll feature prevents any rolling away at the workplace. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 352 Ball end screwdriver for hexagon socket screws, 5/32" x 100 mm kts: hexagonal ball head screwdriver, 5/32" x 100 mm kpn: 352 kpn_dash: kpn_clear: 352 bkpn: WERA 352 bkpn_clear: WERA 352 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022905001 sr_ns: WERA05022905001
r: 08131724 p: 10.082 pid: 173526 b: WERA q: 0 st: lt: 8 ean: 4013288233172 sr: WERA 05005559001 sr_no_br: 05005559001 sr_no_br_cl: 05005559001 sr_cl: WERA05005559001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 18 mm Type of drive profile (socket) Hexagonal Connection size 3/8" Length 63 mm n: WERA 8790 B Impaktor Deep cap with 3/8" drive, 18 x 63 mm - 05005559001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Long Impaktor socket for use with electric or pneumatic wrenches with 3/8" drive. Also usable at low-lying couplings and protruding thread rods. The Impaktor technology ensures higher-than-average service life even at extreme requirements. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. Robust Impaktor sockets for extremely high stress; for use with electric or pneumatic wrenches with 3/8" drive Long sockets for low lying couplings, also suitable for fitting, protruding thread rods in confined spaces Hexagon profile for precise and profile-friendly screwdriving at high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic wrenches with 3/8" drive; with hole for locking pin; long design for low-lying couplings and protruding thread rods; with hexagon profile; chromium molybdenum, matt-black. Take it easy toolfinder: colour coding by size as well as size stamping - to help you find the required socket quickly and easily. Features and benefits The extremely robust forged design ensures higher-than-average service life of the Impaktor sockets even at extreme requirements. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor Deep Socket with 3/8" drive, 18 x 63 mm kts: cap with 3/8" drive, 18 x 63 mm kpn: 8790 B Impaktor Deep kpn_dash: kpn_clear: 8790BImpaktorDeep bkpn: WERA 8790 B Impaktor Deep bkpn_clear: WERA 8790BImpaktorDeep c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005559001 sr_ns: WERA05005559001
r: 03177092 p: 10.07 pid: 71386 b: WERA q: 0 st: lt: 12 ean: 4013288202710 sr: WERA 05073075001 sr_no_br: 05073075001 sr_no_br_cl: 05073075001 sr_cl: WERA05073075001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 2 n: WERA 868/1 Z SB internal square bits, 2 x 25 mm (2 pcs) - 05073075001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for square head socket screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for square head socket screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 868/1 Z SB Square-Plus bits, # 2 x 25 mm, 2 pieces 2x 868/1 Z Square-Plus bits: # 2 x 25 mm kts: internal square bits, # 2 x 25 mm (2 pcs) kpn: 868/1 Z SB kpn_dash: kpn_clear: 8681ZSB bkpn: WERA 868/1 Z SB bkpn_clear: WERA 8681ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073075001 sr_ns: WERA05073075001
r: 03177091 p: 10.07 pid: 31413 b: WERA q: 0 st: lt: 12 ean: 4013288202727 sr: WERA 05073074001 sr_no_br: 05073074001 sr_no_br_cl: 05073074001 sr_cl: WERA05073074001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 1 n: WERA 868/1 Z SB internal square bits, 1 x 25 mm (2 pcs) - 05073074001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for square head socket screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for square head socket screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 868/1 Z SB Square-Plus bits, # 1 x 25 mm, 2 pieces 2x 868/1 Z Square-Plus bits: # 1 x 25 mm kts: internal square bits, # 1 x 25 mm (2 pcs) kpn: 868/1 Z SB kpn_dash: kpn_clear: 8681ZSB bkpn: WERA 868/1 Z SB bkpn_clear: WERA 8681ZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073074001 sr_ns: WERA05073074001
r: 02835490 p: 10.06 pid: 42089 b: WERA q: 0 st: lt: 8 ean: 4013288032041 sr: WERA 05118100001 sr_no_br: 05118100001 sr_no_br_cl: 05118100001 sr_cl: WERA05118100001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size HEX 5/64" Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Ball-end hexagon Product Range Wera Kraftform n: WERA 2052 Micro Kraftform hexagonal ball head screwdriver, 5/64" x 60 mm - 05118100001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Wera Micro screwdriver for precision mechanical work. Ballpoint profile: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver with ballpoint for hexagon socket screws Multi-component Kraftform Micro handle with anti-roll feature and rotating cap The Wera Black Point tip offers an exact fit and optimum corrosion protection Ballpoint for dependable working even in difficult installation situations Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Round Design Hexagon ball end, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (blue = hexagon) and size stamp. Features and benefits Screwdriving jobs in electrical and precision engineering applications are often tedious and time-consuming. We learned from users what is important for them: working speeds, torque, precision - and we then focused particularly on these issues. The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 2052 Ball end hexagon screwdriver for electronic applications, 5/64" x 60 mm kts: Kraftform hexagonal ball head screwdriver, 5/64" x 60 mm kpn: 2052 Micro kpn_dash: kpn_clear: 2052Micro bkpn: WERA 2052 Micro bkpn_clear: WERA 2052Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118100001 sr_ns: WERA05118100001
r: 02818587 p: 9.98 pid: 45454 b: WERA q: 0 st: lt: 12 ean: 4013288157065 sr: WERA 05380161001 sr_no_br: 05380161001 sr_no_br_cl: 05380161001 sr_cl: WERA05380161001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 RH bit Phillips with reduced shank, PH 2 x 50 mm - 05380161001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws With reduced shaft diameter Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Reduced shaft diameter, extra-hard Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery 851/4 RH Reduced tip bits, PH 2 x 50 mm kts: bit Phillips with reduced shank, PH 2 x 50 mm kpn: 851/4 RH kpn_dash: kpn_clear: 8514RH bkpn: WERA 851/4 RH bkpn_clear: WERA 8514RH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05380161001 sr_ns: WERA05380161001
r: 03057724 p: 9.97 pid: 31799 b: WERA q: 0 st: lt: 12 ean: 4013288212313 sr: WERA 05008863001 sr_no_br: 05008863001 sr_no_br_cl: 05008863001 sr_cl: WERA05008863001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size #1 Blade length 25 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Square n: WERA 368 Stubby screwdriver for internal square screws, square 1 x 25 mm - 05008863001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Particularly small screwdriver with short blade for hard-to-reach areas. The 2-component Kraftform handle with its handy combination of hard and soft zones allows for a firm grip and precise working. The blades have all the advantages of the Wera bit technology. Special surface treatment of the blades for high corrosion protection and optimum fitting accuracy in the screw. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Short compact shape for working in confined spaces Ergonomic 2-component Kraftform handle for precise work Blades with the benefits of the Wera Bit technology Hexagonal anti-roll feature against rolling away With colour coding and size stamping Application Square head socket screws Blade Hexagonal, turned Handle Kraftform with anti-roll protection, 2 components, with colour coding and size stamping Features and benefits With its compact handle shape and the short blade, the Kraftform Stubbies are particularly suitable for working in confined screwdriving situations. The 2-component Kraftform handle allows high power transmission due to the non-slip, softer grip areas and high working speeds due to the hard grip areas, which allow a quick hand switch. The special surface treatment of the blades sees to a high level of corrosion protection and optimum fitting accuracy of the screw. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 368 Stubby screwdriver for square head socket screws, # 1 x 25 mm kts: screwdriver for internal square screws, square 1 x 25 mm kpn: 368 Stubby kpn_dash: kpn_clear: 368Stubby bkpn: WERA 368 Stubby bkpn_clear: WERA 368Stubby c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05008863001 sr_ns: WERA05008863001
r: 03177039 p: 9.97 pid: 31389 b: WERA q: 0 st: lt: 10 ean: 4013288202666 sr: WERA 05073064001 sr_no_br: 05073064001 sr_no_br_cl: 05073064001 sr_cl: WERA05073064001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 867/1 Z TORX BO SB bits with bore SB, TX 20 x 25 mm (2 pcs) - 05073064001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for TORX® socket screws. The hole in the bit and the pin in the TORX® BO screw prevent unauthorized loosening. Safety connection. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For recessed TORX® screws with securing pin TORX® bit with bore hole on the output side Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws with safety pin (BO = with bore hole) Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design TORX® with bore hole, tough, for universal use Features and benefits TORX® tools with a borehole prevent the unauthorised unfastening of safety screws. The screws contain a pin that protrudes into the drive profile so that "normal" TORX® tools cannot be used. This pin fits into the borehole of TORX® BO tools allowing safety screws to be unfastened. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 Z TORX® BO SB bits with bore hole, TX 20 x 25 mm, 2 pieces 2x 867/1 Z TORX® BO bits with bore hole: TX 20 x 25 mm kts: bits with bore SB, TX 20 x 25 mm (2 pcs) kpn: 867/1 Z TORX BO SB kpn_dash: kpn_clear: 8671ZTORXBOSB bkpn: WERA 867/1 Z TORX BO SB bkpn_clear: WERA 8671ZTORXBOSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073064001 sr_ns: WERA05073064001
r: 08103787 p: 9.96 pid: 71609 b: WERA q: 0 st: lt: 8 ean: 4013288227263 sr: WERA 05005505001 sr_no_br: 05005505001 sr_no_br_cl: 05005505001 sr_cl: WERA05005505001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 14 mm Type of drive profile (socket) Hexagonal Connection size 3/8" Length 30 mm n: WERA 8790 B Impaktor cap with 3/8" drive, 14 x 30 mm - 05005505001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 14 x 30 mm kts: Impaktor cap with 3/8" drive, 14 x 30 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005505001 sr_ns: WERA05005505001
r: 08103800 p: 9.96 pid: 72233 b: WERA q: 0 st: lt: 8 ean: 4013288227430 sr: WERA 05005520001 sr_no_br: 05005520001 sr_no_br_cl: 05005520001 sr_cl: WERA05005520001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 5/8" Type of drive profile (socket) Hexagonal Connection size 3/8" Length 30 mm n: WERA 8790 B Impaktor cap wrench insert with 3/8" drive, 5/8" x 30 mm - 05005520001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 5/8" x 30 mm kts: Impaktor cap wrench insert with 3/8" drive, 5/8" x 30 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005520001 sr_ns: WERA05005520001
r: 08103790 p: 9.96 pid: 70229 b: WERA q: 0 st: lt: 8 ean: 4013288227287 sr: WERA 05005507001 sr_no_br: 05005507001 sr_no_br_cl: 05005507001 sr_cl: WERA05005507001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 16 mm Type of drive profile (socket) Hexagonal Connection size 3/8" Length 30 mm n: WERA 8790 B Impaktor cap with 3/8" drive, 16 x 30 mm - 05005507001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 16 x 30 mm kts: Impaktor cap with 3/8" drive, 16 x 30 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005507001 sr_ns: WERA05005507001
r: 08103797 p: 9.96 pid: 72226 b: WERA q: 0 st: lt: 8 ean: 4013288227454 sr: WERA 05005522001 sr_no_br: 05005522001 sr_no_br_cl: 05005522001 sr_cl: WERA05005522001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Socket size 3/4" Type of drive profile (socket) Hexagonal Connection size 3/8" Length 30 mm n: WERA 8790 B Impaktor cap wrench insert with 3/8" drive, 3/4" x 30 mm - 05005522001 cn: IMPACT SOCKET cn2: IMPACT SOCKET cn_clear: IMPACTSOCKET d: Product description Impaktor socket wrench insert for use with electric or pneumatic wrenches with 3/8" drive. The Impaktor technology ensures a higher-than-average service life even at extreme requirements. With Take it easy Tool finder with colour coding by size - for quick and easy identification of the required tool. With hexagon profile and socket with hole. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. For external hexagon bolts and screws. For use with electric or pneumatic wrenches with 3/8" drive Impaktor technology for above-average service life Hexagon profile allows precise and profile-friendly screwdriving with high power transmission With Take it easy tool finder: colour coding by size With cross hole and ring socket to attach the safety pin and safety ring of machine operated tools Application For external hexagon bolts and screws Design For use with electric or pneumatic impact wrenches with 3/8" drive, with retaining pin hole, chrome-molybdenum, matt black finish. Take it easy tool finder: Colour coding to enable the desired socket to be easily located. Features and benefits The Impaktor technology ensures above-average service life of the Impaktor socket wrench plug-ins even under extreme conditions. Thanks to the hole and the ring socket, the tools can be held securely on the power tool with a safety pin or an O-ring. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 8790 B Impaktor socket with 3/8" drive, 3/4" x 30 mm kts: Impaktor cap wrench insert with 3/8" drive, 3/4" x 30 mm kpn: 8790 B kpn_dash: kpn_clear: 8790B bkpn: WERA 8790 B bkpn_clear: WERA 8790B c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Impact socket | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera impact socket sr_no_br_cl_ns: 05005522001 sr_ns: WERA05005522001
