r: 02823264 p: 7.16 pid: 44571 b: WERA q: 0 st: lt: 8 ean: 4013288099808 sr: WERA 05134377001 sr_no_br: 05134377001 sr_no_br_cl: 05134377001 sr_cl: WERA05134377001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 25 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T25 Quantity per blister 1 n: WERA 867/1 BDC SB SIS TORX bit, TX 25 x 25 mm - 05134377001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Bits for recessed TORX® screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Come with a Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For recessed TORX® screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application TORX® socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, diamond-coated for secure screw fit. Take it easy tool finder: Output colour coding (green = TORX®) and large stamp to enable the desired bit to be easily located. Features and benefits Particularly when applications involve sensitive materials or high quality surfaces are involved, bits with a diamond coating ensure that work is done safer, faster and at lower cost. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. One of the greatest problems with power tool applications is that the conventional bit easily slips out of the head of the screw (cam-out). This often destroys both the head of the screw and the tool. High resulting costs are incurred e.g. from damaged surfaces and screw connections that can no longer be loosened. Screwdriving will become safer and more economic if this problem of slipping can be minimised. Today, the Wera diamond bit - manufactured with the technology specifically developed by Wera for this application - still sets the standard in terms of resilience and functionality. Wera bits with a diamond coating ensure a secure fit of the bit in the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 867/1 BDC SB TORX® bits, TX 25 x 25 mm kts: bit, TX 25 x 25 mm kpn: 867/1 BDC SB SIS TORX kpn_dash: kpn_clear: 8671BDCSBSISTORX bkpn: WERA 867/1 BDC SB SIS TORX bkpn_clear: WERA 8671BDCSBSISTORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134377001 sr_ns: WERA05134377001
r: 08103816 p: 7.15 pid: 72253 b: WERA q: 0 st: lt: 8 ean: 4013288230201 sr: WERA 05022651001 sr_no_br: 05022651001 sr_no_br_cl: 05022651001 sr_cl: WERA05022651001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 5/64" With ball head Yes With handle No Handle type VDE approved No Non-sparking No Blade length 50 mm Short arm length 14 mm Overall length 59 mm n: WERA 950 SPKS pin spanner Multicolour, inch, BlackLaser, 5/64" x 50 mm - 05022651001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality Wera L-keys with colour coded, convenient plastic sleeve. This means that the tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. Hex-Plus L-keys provide larger contact surfaces on the screw head. The notching effect is thereby reduced to a minimum; the destruction of the screw head is almost eliminated. The ball on the long arm allows safe working even in difficult mounting positions. The BlackLaser surface treatment provides excellent surface protection, corrosion resistance and long life. Laser coated abrasion-resistant size markings on the L-keys for quick access. Short design Imperial L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Colour coded, easy-to-grip plastic sleeve, even at low temperatures Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 950 SPKS L-key Multicolour, Imperial, BlackLaser, 5/64" x 50 mm kts: pin spanner Multicolour, inch, BlackLaser, 5/64" x 50 mm kpn: 950 SPKS kpn_dash: kpn_clear: 950SPKS bkpn: WERA 950 SPKS bkpn_clear: WERA 950SPKS c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022651001 sr_ns: WERA05022651001
r: 02822407 p: 7.107 pid: 45168 b: WERA q: 0 st: lt: 12 ean: 4013288112743 sr: WERA 05135272001 sr_no_br: 05135272001 sr_no_br_cl: 05135272001 sr_cl: WERA05135272001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip PH0 Drive profile size (bit) 0 n: WERA 851/9 C bit Phillips, Halfmoon, PH 0 x 44 mm - 05135272001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design. For Phillips screws Optimised for Japanese Phillips screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Phillips screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 851/9 C J PH bits, halfmoon, PH 0 x 44 x 1.8 mm kts: bit Phillips, Halfmoon, PH 0 x 44 mm kpn: 851/9 C kpn_dash: kpn_clear: 8519C bkpn: WERA 851/9 C bkpn_clear: WERA 8519C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135272001 sr_ns: WERA05135272001
r: 02370481 p: 7.107 pid: 43640 b: WERA q: 0 st: lt: 12 ean: 4013288122353 sr: WERA 05022729001 sr_no_br: 05022729001 sr_no_br_cl: 05022729001 sr_cl: WERA05022729001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 3 mm Blade length 80 mm Blade thickness 0,5 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 3160 i VDE cutting screwdriver, stainless steel, 0.5 x 3 x 80 mm - 05022729001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description High quality Kraftform Plus VDE screwdriver out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Insulated VDE stainless blades for secure work at 1,000 volts Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade, stainless to prevent extraneous rust Application Slotted screws Blade Insulated, individually tested as per IEC 60900 Design Conical edge, Lasertip, stainless steel for minimising rust Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Why are stainless elements so often affected by rust? One reason: screwdriving jobs are often carried out with a tool out of made from conventional steel which can result in extraneous rust forming. This is annoying. We were confident that this could be prevented by using tools likewise out of stainless steel and meeting the required standard of industrial hardness. A tool series out of stainless steel. The forming of extraneous rust is prevented and a special vacuum ice-hardening process ensures the required degree of hardness - and they are even VDE-tested, too. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3160 i VDE Insulated screwdriver for slotted screws, stainless, 0.5 x 3 x 80 mm kts: cutting screwdriver, stainless steel, 0.5 x 3 x 80 mm kpn: 3160 i VDE kpn_dash: kpn_clear: 3160iVDE bkpn: WERA 3160 i VDE bkpn_clear: WERA 3160iVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05022729001 sr_ns: WERA05022729001
r: 02828007 p: 7.107 pid: 45886 b: WERA q: 0 st: lt: 8 ean: 4013288033314 sr: WERA 05066678001 sr_no_br: 05066678001 sr_no_br_cl: 05066678001 sr_cl: WERA05066678001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 8 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 8 n: WERA 871/4 TORQ-SET Mplus bit, 8 x 70 mm - 05066678001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. ds: dsc: Scope of delivery 871/4 TORQ-SET® Mplus bits, 8 x 70 mm kts: bit, 8 x 70 mm kpn: 871/4 TORQ-SET Mplus kpn_dash: 871/4 TORQ kpn_clear: 8714TORQSETMplus bkpn: WERA 871/4 TORQ-SET Mplus bkpn_clear: WERA 8714TORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066678001 sr_ns: WERA05066678001
r: 02827984 p: 7.107 pid: 45346 b: WERA q: 0 st: lt: 8 ean: 4013288033307 sr: WERA 05066676001 sr_no_br: 05066676001 sr_no_br_cl: 05066676001 sr_cl: WERA05066676001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 6 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 6 n: WERA 871/4 TORQ-SET Mplus bit, 6 x 70 mm - 05066676001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. ds: dsc: Scope of delivery 871/4 TORQ-SET® Mplus bits, 6 x 70 mm kts: bit, 6 x 70 mm kpn: 871/4 TORQ-SET Mplus kpn_dash: 871/4 TORQ kpn_clear: 8714TORQSETMplus bkpn: WERA 871/4 TORQ-SET Mplus bkpn_clear: WERA 8714TORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066676001 sr_ns: WERA05066676001
r: 02822414 p: 7.107 pid: 44562 b: WERA q: 0 st: lt: 12 ean: 4013288112798 sr: WERA 05135277001 sr_no_br: 05135277001 sr_no_br_cl: 05135277001 sr_cl: WERA05135277001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 64 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip PH1 Drive profile size (bit) 1 n: WERA 851/9 C bit Phillips, Halfmoon, PH 1 x 64 mm - 05135277001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design. For Phillips screws Optimised for Japanese Phillips screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Phillips screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 851/9 C J PH bits, halfmoon, PH 1 x 64 x 3 mm kts: bit Phillips, Halfmoon, PH 1 x 64 mm kpn: 851/9 C kpn_dash: kpn_clear: 8519C bkpn: WERA 851/9 C bkpn_clear: WERA 8519C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135277001 sr_ns: WERA05135277001
r: 02833256 p: 7.107 pid: 41440 b: WERA q: 0 st: lt: 8 ean: 4013288038739 sr: WERA 05022095001 sr_no_br: 05022095001 sr_no_br_cl: 05022095001 sr_cl: WERA05022095001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 3/8" With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 212 mm Short arm length 38 mm Overall length 212 mm n: WERA 950 PKL blacklaser spanner 3/8" x 212 mm - 05022095001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for imperial hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Imperial Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL L-key, Imperial, BlackLaser, 3/8" x 212 mm kts: blacklaser spanner 3/8" x 212 mm kpn: 950 PKL kpn_dash: kpn_clear: 950PKL bkpn: WERA 950 PKL bkpn_clear: WERA 950PKL c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05022095001 sr_ns: WERA05022095001
r: 02828012 p: 7.107 pid: 45332 b: WERA q: 0 st: lt: 8 ean: 4013288033321 sr: WERA 05066680001 sr_no_br: 05066680001 sr_no_br_cl: 05066680001 sr_cl: WERA05066680001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 70 mm Drive profile size (bit) 10 mm Blade thickness Type of drive profile (bit) Torq-set Connection size (bit) 1/4" VDE approved No Bit tip Torq-set 10 n: WERA 871/4 TORQ-SET Mplus bit, 10 x 70 mm - 05066680001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for TORQ-SET® screws. The stronger flanks - when compared with the conventional TORQ-SET® profile - result in 70% more breaking torque and thereby enhanced durability whilst at the same time providing a perfect fit in the screw head. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. For TORQ-SET® screws Mplus for more breaking torque and longer service life 1/4" hexagon drive (Wera connecting series 4) Application TORQ-SET® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Mplus for higher breaking torque and longer service life Features and benefits Wera developed the Mplus profile with stronger flanks compared with tools with a conventional TORQ-SET® profile. This results in approximately 70 % extra torsional strength and greatly extends the service life of Wera Mplus tools. ds: dsc: Scope of delivery 871/4 TORQ-SET® Mplus bits, 10 x 70 mm kts: bit, 10 x 70 mm kpn: 871/4 TORQ-SET Mplus kpn_dash: 871/4 TORQ kpn_clear: 8714TORQSETMplus bkpn: WERA 871/4 TORQ-SET Mplus bkpn_clear: WERA 8714TORQSETMplus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066680001 sr_ns: WERA05066680001
r: 03228571 p: 7.107 pid: 70007 b: WERA q: 0 st: lt: 12 ean: 4013288194299 sr: WERA 05024483001 sr_no_br: 05024483001 sr_no_br_cl: 05024483001 sr_cl: WERA05024483001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T10 With handle No Handle type Overall length 112 mm Width 19 mm Drive (pin key) Torx n: WERA 967 SXL TORX Multicolour open-end spanner, long, TX 10 x 112 mm - 05024483001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description Wera L-key with hose sleeve to protect the fingers, ergonomic and comfortable hold even at low temperatures. The BlackLaser surface treatment makes for excellent surface protection, even from corrosion, and for long durability. Lasered and therefore abrasion-proof size marking on the L-key for quick access. With Take it easy tool finder: colour coding by size L-keys for recessed TORX® screws Colour coded, easy-to-grip plastic sleeve, even at low temperatures Long version Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® Features and benefits L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 967 SXL TORX® L-key Multicolour, long, TX 10 x 112 mm kts: open-end spanner, long, TX 10 x 112 mm kpn: 967 SXL TORX Multicolour kpn_dash: kpn_clear: 967SXLTORXMulticolour bkpn: WERA 967 SXL TORX Multicolour bkpn_clear: WERA 967SXLTORXMulticolour c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024483001 sr_ns: WERA05024483001
r: 08108000 p: 7.107 pid: 159581 b: WERA q: 0 st: lt: 8 ean: 4013288229533 sr: WERA 05006582001 sr_no_br: 05006582001 sr_no_br_cl: 05006582001 sr_cl: WERA05006582001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved Yes Bit tip PZ1 Drive profile size (bit) 1 Product Range Wera Kraftform Kompakt n: WERA 05006582001 Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE stainless blades for Kraftform Kompakt handle/blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Wera's stainless steel tools are vacuum ice tempered and therefore have the hardness and strength properties required for screw connections. Industrial use is possible without restrictions. With Take it easy Tool finder: Colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade suitable for Pozidriv screws Insulated, individually tested as per IEC 60900 Reduced shaft diameter and integrated insulation protection In this way, low-lying PZ screws can be accessed and actuated Blades made of stainless steel to prevent extraneous rust Application Suitable for Pozidriv screws Blade Reduced blade diameter with integrated protective insulation, low lying PZ screws can be easily reached and operated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Stainless steel, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. The VDE-insulated Kraftform Kompakt stainless blades are suitable for the 3817 VDE Stainless handle. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. ds: dsc: Scope of delivery Kraftform Kompakt VDE 3065 iS PZ Take it easy SB, stainless steel, PZ 1 x 157 mm kts: Kraftform Kompakt VDE insert for Pozidriv screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006582001 kpn_dash: kpn_clear: 05006582001 bkpn: WERA 05006582001 bkpn_clear: WERA 05006582001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006582001 sr_ns: WERA05006582001
r: 03229185 p: 7.107 pid: 71756 b: WERA q: 0 st: lt: 12 ean: 4013288190444 sr: WERA 05134605001 sr_no_br: 05134605001 sr_no_br_cl: 05134605001 sr_cl: WERA05134605001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 44 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 4 mm Connection profile (bit) Halfmoon VDE approved No Bit tip PH000 Drive profile size (bit) 000 n: WERA 851/9 C bit Phillips, Halfmoon, PH 000 x 44 mm - 05134605001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design. For Phillips screws Optimised for Japanese Phillips screws Hard design 4 mm halfmoon drive (Wera connecting series 9) Application Phillips screws Drive Halfmoon, 4 mm Design Hard Features and benefits Halfmoon, 4mm, Wera Series 9. Drive: For direct machine drive. Suitable for: Delvo, Densei etc. ds: dsc: Scope of delivery 851/9 C J PH bits, halfmoon, PH 000 x 44 x 1.5 mm kts: bit Phillips, Halfmoon, PH 000 x 44 mm kpn: 851/9 C kpn_dash: kpn_clear: 8519C bkpn: WERA 851/9 C bkpn_clear: WERA 8519C c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134605001 sr_ns: WERA05134605001
r: 02833844 p: 7.05 pid: 41855 b: WERA q: 0 st: lt: 12 ean: 4013288104908 sr: WERA 05024167001 sr_no_br: 05024167001 sr_no_br_cl: 05024167001 sr_cl: WERA05024167001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T30 With handle No Handle type Overall length 122 mm Width 24 mm Drive (pin key) Torx n: WERA 967 L TORX HF socket spanner with holding function, BlackLaser, TX 30 x 122 mm - 05024167001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Application TORX® socket screws Design Round, BlackLaser surface Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 967 L TORX® HF L-key with holding function, BlackLaser, TX 30 x 122 mm kts: socket spanner with holding function, BlackLaser, TX 30 x 122 mm kpn: 967 L TORX HF kpn_dash: kpn_clear: 967LTORXHF bkpn: WERA 967 L TORX HF bkpn_clear: WERA 967LTORXHF c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024167001 sr_ns: WERA05024167001
r: 08108029 p: 7.03 pid: 159629 b: WERA q: 0 st: lt: 8 ean: 4013288228604 sr: WERA 05006518001 sr_no_br: 05006518001 sr_no_br_cl: 05006518001 sr_cl: WERA05006518001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Length 157 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 9 mm Connection profile (bit) Hexagonal VDE approved Yes Bit tip HEX 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Kraftform Kompakt n: WERA 05006518001 Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm cn: BIT cn2: BIT cn_clear: BIT d: Product description VDE blade for the Kraftform Kompakt handle/interchangeable blade system. Lightning-fast blade changes without special tools. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The Hex-Plus profile prevents hexagonal socket screws from cylindrical turning. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. With Take it easy tool finder: colour coding by profile and laser-engraved size indication. The hexagon anti-roll protection avoids blades from rolling away unintentionally. Kraftform Kompakt VDE interchangeable blade for hexagon socket screws With Hex-Plus profile (prevents rounding-out of hexagonal socket screws) Insulated, individually tested as per IEC 60900 9 mm hex drive with with entry chamfer Black Point tip for enhanced corrosion protection and an exact fit Application Hexagonal socket screws Blade Insulated, individually tested as per IEC 60900 Drive 9 mm hexagonal with insertion bevel Design Hex-Plus; burnished, Black Point tip, Take it easy Tool finder: Colour coding by profile and laser-engraved size indication; with hexagon anti-roll protection against rolling away Features and benefits Testing the tool for dielectric strength at 10,000 volt gives the user the peace of mind that their tool has been tested for its most important property, insulation. Wera VDE tools are subjected to this test piece by piece which guarantees safe working at up to 1,000 volt. The 157 mm length blades are suitable for Wera Kraftform bitholding screwdrivers 7400 VDE, 837 i RA, 827 T i and 817 VDE. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! ds: dsc: Scope of delivery Kraftform Kompakt VDE 64 i Take it easy, 2.5 x 157 mm kts: Kraftform Kompakt VDE inserts for hexagon socket screws 3062 i SB, stainless steel, PH 1 x 157 mm kpn: 05006518001 kpn_dash: kpn_clear: 05006518001 bkpn: WERA 05006518001 bkpn_clear: WERA 05006518001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006518001 sr_ns: WERA05006518001
r: 02833017 p: 7.03 pid: 41420 b: WERA q: 0 st: lt: 15 ean: 4013288095060 sr: WERA 05027108001 sr_no_br: 05027108001 sr_no_br_cl: 05027108001 sr_cl: WERA05027108001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Blade length 200 mm Short arm length 36 mm Overall length 200 mm n: WERA 950 PKL BM socket spanner metric blacklaser 8 x 200 mm - 05027108001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-keys for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for hexagonal socket screws Hexagonal socket wrench with Hex-Plus advantage for a longer screw life Hexagonal ballpoint on the long arm BlackLaser for high corrosion protection and long service life Metric Application Hexagon socket screws Design BlackLaser surface Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. L-keys with BlackLaser surface treatment for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKL BM L-key, metric, BlackLaser, 8 x 200 mm kts: socket spanner metric blacklaser 8 x 200 mm kpn: 950 PKL BM kpn_dash: kpn_clear: 950PKLBM bkpn: WERA 950 PKL BM bkpn_clear: WERA 950PKLBM c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05027108001 sr_ns: WERA05027108001
r: 02834899 p: 7.02 pid: 41952 b: WERA q: 0 st: lt: 12 ean: 4013288093523 sr: WERA 05026351001 sr_no_br: 05026351001 sr_no_br_cl: 05026351001 sr_cl: WERA05026351001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T7 With handle Yes Handle type Flag handle Blade length (mm) 33 mm Overall length 62 mm Drive (pin key) Torx n: WERA 1267 A TORX flag spanner, TX 7 x 33 mm - 05026351001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality Wera flagdriver for recessed TORX® screws. High torque transfer for small screws. Particularly suitable for exchanging indexable inserts. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Multi-component for outstanding grip. TORX® flagdriver for recessed TORX® screws Multi-component handle Circular blade with BlackLaser treatment for outstanding surface protection and long service life High corrosion protection High torque transfer for small screws Application TORX® socket screws Blade Round Design BlackLaser surface Handle Multi-component Features and benefits ds: dsc: Scope of delivery 1267 A TORX® Flagdriver for TORX® screws, TX 7 x 33 mm kts: flag spanner, TX 7 x 33 mm kpn: 1267 A TORX kpn_dash: kpn_clear: 1267ATORX bkpn: WERA 1267 A TORX bkpn_clear: WERA 1267ATORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05026351001 sr_ns: WERA05026351001
r: 02834894 p: 7.02 pid: 41591 b: WERA q: 0 st: lt: 12 ean: 4013288093516 sr: WERA 05026350001 sr_no_br: 05026350001 sr_no_br_cl: 05026350001 sr_cl: WERA05026350001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T6 With handle Yes Handle type Flag handle Blade length (mm) 33 mm Overall length 62 mm Drive (pin key) Torx n: WERA 1267 A TORX flag spanner, TX 6 x 33 mm - 05026350001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality Wera flagdriver for recessed TORX® screws. High torque transfer for small screws. Particularly suitable for exchanging indexable inserts. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Multi-component for outstanding grip. TORX® flagdriver for recessed TORX® screws Multi-component handle Circular blade with BlackLaser treatment for outstanding surface protection and long service life High corrosion protection High torque transfer for small screws Application TORX® socket screws Blade Round Design BlackLaser surface Handle Multi-component Features and benefits ds: dsc: Scope of delivery 1267 A TORX® Flagdriver for TORX® screws, TX 6 x 33 mm kts: flag spanner, TX 6 x 33 mm kpn: 1267 A TORX kpn_dash: kpn_clear: 1267ATORX bkpn: WERA 1267 A TORX bkpn_clear: WERA 1267ATORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05026350001 sr_ns: WERA05026350001
r: 02827821 p: 7.02 pid: 45262 b: WERA q: 0 st: lt: 8 ean: 4013288158444 sr: WERA 05073932001 sr_no_br: 05073932001 sr_no_br_cl: 05073932001 sr_cl: WERA05073932001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 3 Quantity per blister 1 n: WERA 868/1 IMP DC SB SiS square bit SB, 3 x 25 mm - 05073932001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for square head socket screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance Features and benefits Impaktor technology for an above-average service life even under extreme demands For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. ds: dsc: Scope of delivery 868/1 IMP DC SB Impaktor Square-Plus bits, # 3 x 25 mm kts: square bit SB, # 3 x 25 mm kpn: 868/1 IMP DC SB SiS kpn_dash: kpn_clear: 8681IMPDCSBSiS bkpn: WERA 868/1 IMP DC SB SiS bkpn_clear: WERA 8681IMPDCSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073932001 sr_ns: WERA05073932001
r: 02827815 p: 7.02 pid: 45843 b: WERA q: 0 st: lt: 8 ean: 4013288158437 sr: WERA 05073931001 sr_no_br: 05073931001 sr_no_br_cl: 05073931001 sr_cl: WERA05073931001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Square Connection size (bit) 1/4" VDE approved No Bit tip # 2 Quantity per blister 1 n: WERA 868/1 IMP DC SB SiS square bit SB, 2 x 25 mm - 05073931001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for square head socket screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size Application Square socket head screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance Features and benefits Impaktor technology for an above-average service life even under extreme demands For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. ds: dsc: Scope of delivery 868/1 IMP DC SB Impaktor Square-Plus bits, # 2 x 25 mm kts: square bit SB, # 2 x 25 mm kpn: 868/1 IMP DC SB SiS kpn_dash: kpn_clear: 8681IMPDCSBSiS bkpn: WERA 868/1 IMP DC SB SiS bkpn_clear: WERA 8681IMPDCSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073931001 sr_ns: WERA05073931001
r: 03228575 p: 7.01 pid: 70440 b: WERA q: 0 st: lt: 12 ean: 4013288193674 sr: WERA 05024451001 sr_no_br: 05024451001 sr_no_br_cl: 05024451001 sr_cl: WERA05024451001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Drive size T8 With handle No Handle type Overall length 90 mm Width 16 mm Drive (pin key) Torx n: WERA 967 XL HF TORX socket spanner with holding function, long, TX 8 x 90 mm - 05024451001 cn: PIN KEY cn2: PIN KEY cn_clear: PINKEY d: Product description High quality L-keys for recessed TORX® screws. With holding function (HF) on the long arm to securely hold the screw on the tool. Comes with extra-long arm. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. L-keys for recessed TORX® screws The holding function on the long arm keeps screws securely on the tool BlackLaser for high corrosion protection and long service life Laser-engraved and thereby wear-resistant size markings Zinc phosphate plated Application TORX® socket screws Design Zinc-phosphated Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 967 XL TORX® HF TORX® L-key with holding function, long, TX 8 x 90 mm kts: socket spanner with holding function, long, TX 8 x 90 mm kpn: 967 XL HF TORX kpn_dash: kpn_clear: 967XLHFTORX bkpn: WERA 967 XL HF TORX bkpn_clear: WERA 967XLHFTORX c_path: Home / Tools / Hand tools / Keys / Keys / Pin key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera pin key sr_no_br_cl_ns: 05024451001 sr_ns: WERA05024451001
