r: 02833723 p: 3.32 pid: 43547 b: WERA q: 0 st: lt: 8 ean: 4013288098054 sr: WERA 05133151001 sr_no_br: 05133151001 sr_no_br_cl: 05133151001 sr_cl: WERA05133151001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width across flats 2 mm Non-sparking No Overall length 56 mm Blade length 56 mm Surface treatment Chrome plated Short arm length 16 mm With safety colour code 1000V No VDE approved No Handle type With handle No With ball head Yes n: WERA 950 PKS socket spanner metric chrome plated 2 x 56 mm - 05133151001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description High quality L-key with extra-short arm for use on difficult-to-access screws; for hexagon socket screws. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The precise chrome-plated design ensures high corrosion protection. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. L-keys for hexagonal socket screws Hexagonal ballpoint on the long arm Short design for particularly confined screwdriving situations Hexagonal socket wrench with Hex-Plus advantage for a longer screw life High corrosion protection thanks to chrome-plating Application Hexagon socket screws Design Short, chrome-plated Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. ds: dsc: Scope of delivery 950 PKS L-key, metric, chrome-plated, 2 x 56 mm kts: socket spanner metric chrome plated 2 x 56 mm kpn: 950 PKS kpn_dash: kpn_clear: 950PKS bkpn: WERA 950 PKS bkpn_clear: WERA 950PKS c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key sr_no_br_cl_ns: 05133151001 sr_ns: WERA05133151001
r: 02818379 p: 3.3 pid: 45398 b: WERA q: 0 st: lt: 6 ean: 4013288107176 sr: WERA 05346281001 sr_no_br: 05346281001 sr_no_br_cl: 05346281001 sr_cl: WERA05346281001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 RH bit Phillips, PH 2 x 25 mm - 05346281001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws With reduced shaft diameter Profiled version Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Reduced shaft diameter, extra-hard, profiled version Features and benefits Bits with reduced shaft diameter Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. ds: dsc: Scope of delivery 851/1 RH bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 RH kpn_dash: kpn_clear: 8511RH bkpn: WERA 851/1 RH bkpn_clear: WERA 8511RH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05346281001 sr_ns: WERA05346281001
r: 02822782 p: 3.3 pid: 45072 b: WERA q: 0 st: lt: 16 ean: 4013288175311 sr: WERA 05135017001 sr_no_br: 05135017001 sr_no_br_cl: 05135017001 sr_cl: WERA05135017001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/1 RZ PZ bit Pozidriv, PZ 1 x 25 mm - 05135017001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Pozidriv* screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction and suitable for drywall screws. Pozidriv*. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws With reduced shaft diameter Particularly suitable for drywall screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Dry wall Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Reduced shaft diameter, tough, for universal use Features and benefits Bits with reduced shaft diameter ensure that screws can be sunk without damaging the surface. This is particularly necessary in drywall construction applications. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 RZ bits, PZ 1 x 25 mm kts: bit Pozidriv, PZ 1 x 25 mm kpn: 855/1 RZ PZ kpn_dash: kpn_clear: 8551RZPZ bkpn: WERA 855/1 RZ PZ bkpn_clear: WERA 8551RZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135017001 sr_ns: WERA05135017001
r: 03229912 p: 3.22 pid: 70561 b: WERA q: 0 st: lt: 12 ean: 4013288211774 sr: WERA 05078711001 sr_no_br: 05078711001 sr_no_br_cl: 05078711001 sr_cl: WERA05078711001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Product Range Wera Click-Torque n: WERA 7763 Click-Torque cuff M5, 73 x 88 x 27 mm - 05078711001 cn: ACCESSORY/PART TORQUE TOOL cn2: ACCESSORY/PART TORQUE TOOL cn_clear: ACCESSORYPARTTORQUETOOL d: Product description The collar prevents the handle of the Click-Torque torque wrench from touching the ground. Dirt and damage are avoided when putting down the tool while working. Also prevents the tool from rolling away, and it serves to fix the Click-Torque torque wrench in the storage/transport box. The collar can be easily attached to the torque wrench tube and is removable. Protection against damage and dirt Anti-roll protection Practical transport/storage security Easy assembly/disassembly Click-Torque collar as an accessory for Click-Torque Torque wrench E 1 Click-Torque collar as an accessory for Click-Torque Torque wrench E 1 and Click-Torque Push R/L E 1. Features and benefits The Click-Torque collar is placed around the tube of the Wera Click-Torque torque wrench. It prevents the handle from touching the ground. Dirt and damage are avoided. Also serves as "anti-roll protection". ds: dsc: Scope of delivery 7763 Click-Torque collar M5, 73 x 27 mm kts: Click-Torque cuff M5, 73 x 88 x 27 mm kpn: 7763 kpn_dash: kpn_clear: 7763 bkpn: WERA 7763 bkpn_clear: WERA 7763 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Accessory/part torque tool | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera accessory/part torque tool | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05078711001 sr_ns: WERA05078711001
r: 03229910 p: 3.22 pid: 71864 b: WERA q: 0 st: lt: 12 ean: 4013288211750 sr: WERA 05078706001 sr_no_br: 05078706001 sr_no_br_cl: 05078706001 sr_cl: WERA05078706001 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Product Range Wera Click-Torque n: WERA 7761 Click-Torque cuff M4, 55 x 68 x 21.5 mm - 05078706001 cn: ACCESSORY/PART TORQUE TOOL cn2: ACCESSORY/PART TORQUE TOOL cn_clear: ACCESSORYPARTTORQUETOOL d: Product description The collar prevents the handle of the Click-Torque torque wrench from touching the ground. Dirt and damage are avoided when putting down the tool while working. Also prevents the tool from rolling away, and it serves to fix the Click-Torque torque wrench in the storage/transport box. The collar can be easily attached to the torque wrench tube and is removable. Protection against damage and dirt Anti-roll protection Practical transport/storage security Easy assembly/disassembly Click-Torque collar as an accessory for Click-Torque Torque wrenches C 5 and X 6 Click-Torque collar as an accessory for Click-Torque Torque wrenches C 5 and X 6. Features and benefits The Click-Torque collar is placed around the tube of the Wera Click-Torque torque wrench. It prevents the handle from touching the ground. Dirt and damage are avoided. Also serves as "anti-roll protection". ds: dsc: Scope of delivery 7761 Click-Torque collar M4, 55 x 21.5 mm kts: Click-Torque cuff M4, 55 x 68 x 21.5 mm kpn: 7761 kpn_dash: kpn_clear: 7761 bkpn: WERA 7761 bkpn_clear: WERA 7761 c_path: Home / Tools / Hand tools / Torque tools / Accessories and spare parts / Accessory/part torque tool | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera accessories and spare parts / Wera accessory/part torque tool | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05078706001 sr_ns: WERA05078706001
r: 87990412 p: 3.2 pid: 71561 b: WERA q: 0 st: lt: 8 ean: 4013288094858 sr: WERA 05134905001 sr_no_br: 05134905001 sr_no_br_cl: 05134905001 sr_cl: WERA05134905001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/1 Z PH bit Phillips, PH 3 x 50 mm - 05134905001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/1 Z bits, PH 3 x 50 mm kts: bit Phillips, PH 3 x 50 mm kpn: 851/1 Z PH kpn_dash: kpn_clear: 8511ZPH bkpn: WERA 851/1 Z PH bkpn_clear: WERA 8511ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05134905001 sr_ns: WERA05134905001
r: 02818334 p: 3.17 pid: 46041 b: WERA q: 0 st: lt: 12 ean: 4013288034243 sr: WERA 05056410001 sr_no_br: 05056410001 sr_no_br_cl: 05056410001 sr_cl: WERA05056410001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/1 BTH PH bit Phillips, PH 1 x 25 mm - 05056410001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard design, 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTH bits, PH 1 x 25 mm kts: bit Phillips, PH 1 x 25 mm kpn: 851/1 BTH PH kpn_dash: kpn_clear: 8511BTHPH bkpn: WERA 851/1 BTH PH bkpn_clear: WERA 8511BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056410001 sr_ns: WERA05056410001
r: 02822765 p: 3.17 pid: 46778 b: WERA q: 0 st: lt: 12 ean: 4013288034298 sr: WERA 05056714001 sr_no_br: 05056714001 sr_no_br_cl: 05056714001 sr_cl: WERA05056714001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/1 BTH PZ bit Pozidriv, PZ 3 x 25 mm - 05056714001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTH-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTH bits, PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm kpn: 855/1 BTH PZ kpn_dash: kpn_clear: 8551BTHPZ bkpn: WERA 855/1 BTH PZ bkpn_clear: WERA 8551BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056714001 sr_ns: WERA05056714001
r: 02818342 p: 3.17 pid: 44502 b: WERA q: 0 st: lt: 12 ean: 4013288034458 sr: WERA 05056420001 sr_no_br: 05056420001 sr_no_br_cl: 05056420001 sr_cl: WERA05056420001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH1 n: WERA 851/1 BTZ PH bit Phillips, PH 1 x 25 mm - 05056420001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTZ bits, PH 1 x 25 mm kts: bit Phillips, PH 1 x 25 mm kpn: 851/1 BTZ PH kpn_dash: kpn_clear: 8511BTZPH bkpn: WERA 851/1 BTZ PH bkpn_clear: WERA 8511BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056420001 sr_ns: WERA05056420001
r: 02822834 p: 3.17 pid: 45096 b: WERA q: 0 st: lt: 6 ean: 4013288034496 sr: WERA 05056722001 sr_no_br: 05056722001 sr_no_br_cl: 05056722001 sr_cl: WERA05056722001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 BTZ PZ bit Pozidriv, PZ 2 x 25 mm - 05056722001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTZ-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTZ bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 BTZ PZ kpn_dash: kpn_clear: 8551BTZPZ bkpn: WERA 855/1 BTZ PZ bkpn_clear: WERA 8551BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056722001 sr_ns: WERA05056722001
r: 87990895 p: 3.17 pid: 72276 b: WERA q: 0 st: lt: 12 ean: 4013288034472 sr: WERA 05056424001 sr_no_br: 05056424001 sr_no_br_cl: 05056424001 sr_cl: WERA05056424001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/1 BTZ PH bit Phillips, PH 3 x 25 mm - 05056424001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTZ bits, PH 3 x 25 mm kts: bit Phillips, PH 3 x 25 mm kpn: 851/1 BTZ PH kpn_dash: kpn_clear: 8511BTZPH bkpn: WERA 851/1 BTZ PH bkpn_clear: WERA 8511BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056424001 sr_ns: WERA05056424001
r: 02818339 p: 3.17 pid: 44906 b: WERA q: 0 st: lt: 11 ean: 4013288034465 sr: WERA 05056422001 sr_no_br: 05056422001 sr_no_br_cl: 05056422001 sr_cl: WERA05056422001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 BTZ PH bit Phillips, PH 2 x 25 mm - 05056422001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTZ bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 BTZ PH kpn_dash: kpn_clear: 8511BTZPH bkpn: WERA 851/1 BTZ PH bkpn_clear: WERA 8511BTZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056422001 sr_ns: WERA05056422001
r: 02822831 p: 3.17 pid: 45090 b: WERA q: 0 st: lt: 6 ean: 4013288034489 sr: WERA 05056720001 sr_no_br: 05056720001 sr_no_br_cl: 05056720001 sr_cl: WERA05056720001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/1 BTZ PZ bit Pozidriv, PZ 1 x 25 mm - 05056720001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTZ-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTZ bits, PZ 1 x 25 mm kts: bit Pozidriv, PZ 1 x 25 mm kpn: 855/1 BTZ PZ kpn_dash: kpn_clear: 8551BTZPZ bkpn: WERA 855/1 BTZ PZ bkpn_clear: WERA 8551BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056720001 sr_ns: WERA05056720001
r: 02818338 p: 3.17 pid: 44321 b: WERA q: 0 st: lt: 12 ean: 4013288034267 sr: WERA 05056414001 sr_no_br: 05056414001 sr_no_br_cl: 05056414001 sr_cl: WERA05056414001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH3 n: WERA 851/1 BTH PH bit Phillips, PH 3 x 25 mm - 05056414001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard design, 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTH bits, PH 3 x 25 mm kts: bit Phillips, PH 3 x 25 mm kpn: 851/1 BTH PH kpn_dash: kpn_clear: 8511BTHPH bkpn: WERA 851/1 BTH PH bkpn_clear: WERA 8511BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056414001 sr_ns: WERA05056414001
r: 02787431 p: 3.17 pid: 45993 b: WERA q: 0 st: lt: 12 ean: 4013288034250 sr: WERA 05056412001 sr_no_br: 05056412001 sr_no_br_cl: 05056412001 sr_cl: WERA05056412001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/1 BTH PH bit Phillips, PH 2 x 25 mm - 05056412001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws with Torsion zone where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard design, 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (red = Phillips) and large stamp to enable the desired bit to be easily located. Features and benefits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. The BiTorsion holder and the BiTorsion bit can, of course, be used independently of one another. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 851/1 BTH bits, PH 2 x 25 mm kts: bit Phillips, PH 2 x 25 mm kpn: 851/1 BTH PH kpn_dash: kpn_clear: 8511BTHPH bkpn: WERA 851/1 BTH PH bkpn_clear: WERA 8511BTHPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056412001 sr_ns: WERA05056412001
r: 41999367 p: 3.17 pid: 71428 b: WERA q: 0 st: lt: 12 ean: 4013288034274 sr: WERA 05056710001 sr_no_br: 05056710001 sr_no_br_cl: 05056710001 sr_cl: WERA05056710001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 1 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ1 n: WERA 855/1 BTH PZ bit Pozidriv, PZ 1 x 25 mm - 05056710001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Best possible service life with the matching holder. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-hard. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTH-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTH bits, PZ 1 x 25 mm kts: bit Pozidriv, PZ 1 x 25 mm kpn: 855/1 BTH PZ kpn_dash: kpn_clear: 8551BTHPZ bkpn: WERA 855/1 BTH PZ bkpn_clear: WERA 8551BTHPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056710001 sr_ns: WERA05056710001
r: 02822835 p: 3.17 pid: 45102 b: WERA q: 0 st: lt: 6 ean: 4013288034502 sr: WERA 05056724001 sr_no_br: 05056724001 sr_no_br_cl: 05056724001 sr_cl: WERA05056724001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/1 BTZ PZ bit Pozidriv, PZ 3 x 25 mm - 05056724001 cn: BIT cn2: BIT cn_clear: BIT d: Product description BiTorsion bits for Pozidriv* screws with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard design. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of the company European Industrial Service Ltd. Suitable for Pozidriv screws BiTorsion zone to absorb peak loads Considerable reduction in the risk of breakage, significant increase in service life Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design BiTorsion for long service life, extra-tough, for universal use. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits BTZ-Bits Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The effectiveness of the BiTorsion system comes from a combination of two shock-absorbing spring elements. Both, bits as well as holders have a cushioning torsion zone that diverts the kinetic energy away from the drive tip during peak loads. The torsion spring integrated into the unique BiTorsion holder absorbs lower levels of peak loads (Phase 1). Any overloading of this spring is effectively prevented by means of a supporting mechanism. Higher peak loads are minimised through the torsion effect of the bit shaft (Phase 2). Even the service life of conventional bits is enhanced with the use of the BiTorsion holder and the BiTorsion bit also functions in a normal holder. The optimally coordinated features of the torsion zones on the bit and holder permit a phased yield when under strain. The two-phase system prevents premature wear. Moreover, a long tool service life is also ensured by the hardness of the bits that matches the respective application. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 855/1 BTZ bits, PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm kpn: 855/1 BTZ PZ kpn_dash: kpn_clear: 8551BTZPZ bkpn: WERA 855/1 BTZ PZ bkpn_clear: WERA 8551BTZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05056724001 sr_ns: WERA05056724001
r: 02818375 p: 3.1 pid: 46721 b: WERA q: 0 st: lt: 6 ean: 4013288112576 sr: WERA 05135041001 sr_no_br: 05135041001 sr_no_br_cl: 05135041001 sr_cl: WERA05135041001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" Connection profile (bit) Hexagonal VDE approved No Bit tip PH0 Drive profile size (bit) 0 n: WERA 851/1 J bit Phillips, PH 0 x 25 x 2.5 mm - 05135041001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws, optimised for Asian PH screws. Similar to JCIS 8-70. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/1 J bits, PH 0 x 25 x 2.5 mm kts: bit Phillips, PH 0 x 25 x 2.5 mm kpn: 851/1 J kpn_dash: kpn_clear: 8511J bkpn: WERA 851/1 J bkpn_clear: WERA 8511J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135041001 sr_ns: WERA05135041001
r: 02818374 p: 3.1 pid: 45391 b: WERA q: 0 st: lt: 6 ean: 4013288112569 sr: WERA 05135040001 sr_no_br: 05135040001 sr_no_br_cl: 05135040001 sr_cl: WERA05135040001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 00 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH00 n: WERA 851/1 J bit Phillips, PH 00 x 25 x 2 mm - 05135040001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws, optimised for Asian PH screws. Similar to Camera screws. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For Phillips screws Optimised for Japanese Phillips screws Tough for hard materials Prevents premature breakage of the drive tip 1/4" hexagon drive (Wera connecting series 1) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits J stands for Japan. J bits have been optimised to suit Asian PH screws. In particular, they are for use with very small dimensions as set out in the Japanese Camera Standard. ds: dsc: Scope of delivery 851/1 J bits, PH 00 x 25 x 2 mm kts: bit Phillips, PH 00 x 25 x 2 mm kpn: 851/1 J kpn_dash: kpn_clear: 8511J bkpn: WERA 851/1 J bkpn_clear: WERA 8511J c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05135040001 sr_ns: WERA05135040001
r: 02822818 p: 2.95 pid: 45517 b: WERA q: 0 st: lt: 12 ean: 4013288029119 sr: WERA 05073310001 sr_no_br: 05073310001 sr_no_br_cl: 05073310001 sr_cl: WERA05073310001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 Number per blister 2 n: WERA 855/1 Z SB SiS bit Pozidriv, PZ 3 x 25 mm (2 pcs) - 05073310001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials In practical 2-piece set 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z SB bits, PZ 3 x 25 mm, 2 pieces 2x 855/1 Z bits: PZ 3 x 25 mm kts: bit Pozidriv, PZ 3 x 25 mm (2 pcs) kpn: 855/1 Z SB SiS kpn_dash: kpn_clear: 8551ZSBSiS bkpn: WERA 855/1 Z SB SiS bkpn_clear: WERA 8551ZSBSiS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05073310001 sr_ns: WERA05073310001
