r: 02813929 p: 47.768 pid: 20422 b: WERA q: 3 st: 1 lt: 1 ean: 4013288179814 sr: WERA 05057431001 sr_no_br: 05057431001 sr_no_br_cl: 05057431001 sr_cl: WERA05057431001 sr_dash: sold: 12419.68 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Slotted Connection profile (bit) Hexagonal ESD No VDE approved No Quantity per set 30 Supplied in Plastic holder Connection size (bit) 1/4" Product Range Wera Bit-Check n: WERA Bit-Check 30 Diamond 1 screwdriver bit set in plastic holder 30-piece set - 05057431001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Bits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera Take it easy Tool Finder with its colour coding and clearly visible imprint. BiTorsion zone to absorb peak loads Enhanced service life of the bits Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Take it easy tool finder: colour coding according to profile and size 1 bit holder Rapidaptor with quick-release chuck, 29 BiTorsion bits for long service life, diamond-coated (BDC) for secure screw fit. The Take it easy Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. Features and benefits The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. Peak forces that occur in power tool applications often result in premature wear of bits or damage to the screw head. This usually occurs during initial power-up and the when the screw comes to a standstill. Screwdriving could become more productive and safer if these peak loads could be minimised. The Wera BiTorsion system prevents premature wear. The service life of the tool is extended and the productivity of power tool applications significantly increased. The diamond coating of the DC bits lowers the danger of slipping as the minute diamond particles literally "bite" themselves into the screw head. The minute diamond particles applied to the tip of the tool literally "bite" into the screw and ensure an exact, anti-slip fit in the head of the screw. This secure fit protects the screw. The cam-out forces which compel the user to apply greater pressure to the screw are considerably reduced. Ideal for sensitive materials Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. Bitholders, magnetic, for easier application of the screw The Take it easy Bit-Checks have bits with a sleeve which - from its colour (e.g. red = Phillips) and size designation - make it simple to access the right bit quickly. ds: dsc: Scope of delivery Bit-Check 30 Diamond 1, 30 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 7x 851/1 BDC bits: 2x PH 1x25 mm, 4x PH 2x25 mm, PH 3x25 mm 7x 855/1 BDC bits: 2x PZ 1x25 mm, 4x PZ 2x25 mm, PZ 3x25 mm 12x 867/1 BDC TORX® bits: 2x TX 10x25 mm, 2x TX 15x25 mm, 3x TX 20x25 mm, 3x TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 3x 800/1 BDC bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm kts: screwdriver bit set in plastic holder 30-piece set kpn: Bit-Check 30 Diamond 1 kpn_dash: Bit kpn_clear: BitCheck30Diamond1 bkpn: WERA Bit-Check 30 Diamond 1 bkpn_clear: WERA BitCheck30Diamond1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools bit set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057431001 sr_ns: WERA05057431001
r: 02828858 p: 332.727 pid: 44460 b: WERA q: 0 st: lt: 13 ean: 4013288184160 sr: WERA 05020091001 sr_no_br: 05020091001 sr_no_br_cl: 05020091001 sr_cl: WERA05020091001 sr_dash: sold: 11312.718 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 8 mm Largest size 19 mm Quantity per set 11 Product Range Wera Joker n: WERA 6001 Joker Switch 11 Set 1 socket and ring spanner set, 11-piece - 05020091001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches, reversible11-piece setDurable pouch Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch 11 Set 1 Ratcheting combination wrenches set, 11 pieces 11x 6001 Joker Switch Ratcheting combination wrench, with switch lever: 8x144 mm, 10x159 mm, 11x165 mm, 12x171 mm, 13x179 mm, 14x187 mm, 15x199 mm, 16x213 mm, 17x225 mm, 18x234 mm, 19x246 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: socket and ring spanner set, 11-piece kpn: 6001 Joker Switch 11 Set 1 kpn_dash: kpn_clear: 6001JokerSwitch11Set1 bkpn: WERA 6001 Joker Switch 11 Set 1 bkpn_clear: WERA 6001JokerSwitch11Set1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratcheting combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratcheting combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020091001 sr_ns: WERA05020091001
r: 08103860 p: 86.611 pid: 70318 b: WERA q: 22 st: 1 lt: 1 ean: 4013288229557 sr: WERA 05006617001 sr_no_br: 05006617001 sr_no_br_cl: 05006617001 sr_cl: WERA05006617001 sr_dash: sold: 10999.597 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V Yes ESD No Supplied in Case Product Range Wera Kraftform Kompakt n: WERA 05006617001 KRAFTFORM KOMPAKT VDE Big Pack 1, 26-piece cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 26-piece Kraftform Kompakt VDE set, 2x 817 VDE Kraftform blade-holding screwdrivers, 24 VDE blades (each 157 mm length) most of them with reduced blade diameter (iS), so that even low-lying screw and spring elements can be easily reached and operated. Individually tested as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Take it easy Tool finder with colour coding by profile and laser-engraved size indication - for quick and easy identification of the required tool. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The anti-roll protection avoids bits from rolling away annoyingly at the workplace. 2 VDE-insulated Kraftform 817 VDE bladeholding screwdrivers with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication Insulated tools, some blades with reduced diameter for safe working up to 1,000 volt Individually tested tools as per IEC 60900 In a robust folding pouch 26-piece set 2 Kraftform 817 VDE blade-holding screwdrivers solely for Wera VDE blades 24 VDE blades (each 157 mm length) with Take it easy Tool finder with colour coding by profile and laser-engraved size indication Robust textile roll pouch Features and benefits Blades with Take it easy Tool finder with colour coding by profile and laser-engraved size indication Each Kraftform Kompakt VDE set has been tested individually at 10,000 volts, in accordance with IEC 60900.This ten-times-higher testing load guarantees safe working at their maximum permitted load of 1,000 volts. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy tool finder. Colour coding by profile and laser-engraved size indication make it easy to identify the required tool quickly. The Kraftform Kompakt blades come with an anti-roll protection. The hexagonal shape hinders the blade from rolling away annoyingly at the workplace. The palm of your hand is comfortably supported on the rounded shape of the rear end of the blades. This allows quick spinning of the blade and accelerates the screwdriving process. ds: dsc: Scope of delivery Kraftform Kompakt VDE Big Pack 1, 26 pieces 2x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 2x Kraftform Kompakt VDE 62 iS PH/S Take it easy: # 1x157 mm, # 2x157 mm 2x Kraftform Kompakt VDE 65 iS PZ/S Take it easy: # 1x157 mm, # 2x157 mm 4x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 8x157 mm, TX 9x157 mm, TX 10x157 mm, TX 30x157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 4x Kraftform Kompakt VDE 64 i Take it easy: 2.5x157 mm, 3x157 mm, 4x157 mm, 5x157 mm 2x Kraftform Kompakt VDE 60 i Take it easy: 0.4x2.5x157 mm, 1.2x6.5x157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: KRAFTFORM KOMPAKT VDE Big Pack 1, 26-piece kpn: 05006617001 kpn_dash: kpn_clear: 05006617001 bkpn: WERA 05006617001 bkpn_clear: WERA 05006617001 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05006617001 sr_ns: WERA05006617001
r: 02953141 p: 203.471 pid: 31115 b: WERA q: 0 st: lt: 9 ean: 4013288207685 sr: WERA 05004180001 sr_no_br: 05004180001 sr_no_br_cl: 05004180001 sr_cl: WERA05004180001 sr_dash: sold: 10173.55 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 2,5 Nm Max. tightening torque 25 Nm Drive profile size 1/4" Adjustable torque range 2,5-25 Nm n: WERA Bicycle Set Torque 1 screwdriver tool set with torque control for working on bicycle 2.5-25 Nm, 16-piece - 05004180001 cn: TORQUE WRENCH SET cn2: TORQUE WRENCH SET cn_clear: TORQUEWRENCHSET d: Product description The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles, with reliable control of applied torque to protect sensitive components. With a click-torque wrench in the unmistakable Wera design. Very robust design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values also facilitates the safe setting of the desired torque values. The robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached. For clockwise torque-control and with a reversible 45-tooth ratchet. The torque wrench is extremely space-saving and supplemented with accessories that are suitable for the torque range and adapted to the most common screwed connections on bicycles; in a robust, surface-friendly textile box. Included are: Click Torque A 5, 1/4", 2.5 - 25 Nm, 4 sockets with 1/4" drive, 7 Hex Plus hexagon bit sockets and 4 TORX® bit sockets. Sockets and bit sockets with Take it easy tool finder with colour coding by size - for easy and quick location of the required tool. Bit sockets with holding function for extra comfortable screwdriving without the screw falling off the tool. Incredibly compact arrangement for a lot of tools in a small space. Textile box with very high robustness and longevity. Additional surface protection through the textile outer material. Low weight and volume for easier mobility. Bit sockets with all the benefits of Wera bit technology such as fitting accuracy, wear resistance and concentric run-out properties. 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes and e-bikes Easy setting and saving of the desired torque value with audible and tactile click when the scale value is reached (click 1) Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. 16-piece set; in a surface protecting, compact and extremely robust textile box; low volume and weight for simplified mobility. 1 Click-Torque torque wrench A 5 with 1/4" square drive, covering a range of 2.5 Nm-25 Nm, accuracy ± 4% of the set value, as per DIN EN ISO 6789-1: 2017-07, for clockwise torque control, reversible ratchet, 45 teeth, easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached, ergonomic 2-component handle, 4 Zyklop sockets, with 1/4" drive, 4 Zyklop bit sockets for TORX® screws, with 1/4" drive, 7 bit sockets for hexagon socket screws with 1/4" drive with holding function; Take it easy tool finder: Colour coding to enable the desired bit socket to be easily selected Features and benefits The Bicycle Set Torque 1 contains tools for the most popular screw profiles on road bikes, mountain bikes and e-bikes. With the included Click-Torque A torque wrench (2.5-25 Nm), even torque-sensitive screwed connections can be loosened and tightened reliably. Clear and compact tool storage in the textile box. Click torque wrench in unmistakable Wera design. Precision of ±34 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery Bicycle Set Torque 1, 2.5-25 Nm, 16 pieces 1x Click-Torque A 5 torque wrench with reversible ratchet, 2.5-25 Nm: 1/4" x 2.5-25 Nm 4x 8790 HMA Zyklop 1/4" socket: 10x23 mm, 13x23 mm, 14x23 mm, 15x23 mm 4x 8767 A TORX® Zyklop bit socket, 1/4" drive: TX 10x28 mm, TX 20x28 mm, TX 25x28 mm, TX 30x28 mm 7x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 3x28 mm, 4x28 mm, 5x28 mm, 5x100 mm, 6x28 mm, 6x100 mm, 8x28 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: screwdriver tool set with torque control for working on bicycle 2.5-25 Nm, 16-piece kpn: Bicycle Set Torque 1 kpn_dash: kpn_clear: BicycleSetTorque1 bkpn: WERA Bicycle Set Torque 1 bkpn_clear: WERA BicycleSetTorque1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque wrench set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque wrench set sr_no_br_cl_ns: 05004180001 sr_ns: WERA05004180001
r: 02833869 p: 24.628 pid: 41878 b: WERA q: 18 st: 1 lt: 1 ean: 4013288185228 sr: WERA 05024179001 sr_no_br: 05024179001 sr_no_br_cl: 05024179001 sr_cl: WERA05024179001 sr_dash: sold: 10122.108 p_range: none type: standard act: 1 avo: 1 av: Min. head size 8 Max. head size 40 Type of drive profile Torx Supplied in Clip Quantity per set 9 Material Stainless steel n: WERA 967/9 TX Multicolour HF 1 Torx socket wrench set with holding function 9-piece - 05024179001 cn: PIN KEY SET cn2: PIN KEY SET cn_clear: PINKEYSET d: Product description High quality L-keys for recessed TORX® screws. Comes With holding function (HF) on the long arm to securely hold the screw on the tool. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Take it easy Tool Finder with colour coding according to size. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. L-keys for recessed TORX® screws With holding function (HF) on the long arm to securely hold the screw on the tool With Take it easy tool finder: colour coding by size Colour coded, easy-to-grip plastic sleeve, even at low temperatures BlackLaser for high corrosion protection and long service life 9-piece set in a two-component clip Application TORX® socket screws Design Round, zinc-phosphated, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip TORX® on short arm, holding function for TORX® screws made according to Acument Intellectual Properties specifications on long arm Features and benefits Holding function for recessed TORX® screws In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 967/9 TX Multicolour HF 1 L-key set with holding function, 9 pieces 9x 967 SL TORX® HF L-key Multicolour with holding function: TX 8x76 mm, TX 9x79 mm, TX 10x85 mm, TX 15x90 mm, TX 20x96 mm, TX 25x104 mm, TX 27x112 mm, TX 30x122 mm, TX 40x132 mm kts: Torx socket wrench set with holding function 9-piece kpn: 967/9 TX Multicolour HF 1 kpn_dash: kpn_clear: 9679TXMulticolourHF1 bkpn: WERA 967/9 TX Multicolour HF 1 bkpn_clear: WERA 9679TXMulticolourHF1 c_path: Home / Tools / Hand tools / Keys / Sets / Pin key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera pin key set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools hex key set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools sr_no_br_cl_ns: 05024179001 sr_ns: WERA05024179001
r: 02834141 p: 32.066 pid: 43644 b: WERA q: 9 st: 1 lt: 1 ean: 4013288185211 sr: WERA 05022669001 sr_no_br: 05022669001 sr_no_br_cl: 05022669001 sr_cl: WERA05022669001 sr_dash: sold: 10036.658 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm Max. width across flats 10 mm With ball head Yes Supplied in Plastic holder Quantity per set 9 Product Range Wera Hex-Plus n: WERA 3950/9 Hex-Plus Multicolour Stainless 1 socket wrench set metric stainless steel 9-piece - 05022669001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set out of stainless steel for hexagon socket screws by Wera. Stainless steel prevents the transfer of extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Come with hex ballpoint on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Take it easy Tool Finder: colour coding according to size. In an almost wear-free L-key clip fastener. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Hex-Plus allows socket head screws to live longer With Take it easy tool finder: colour coding by size Wear-resistant clip material for enhanced durability Colour coded, easy-to-grip plastic sleeve, even at low temperatures 9-piece set in a two-component clip Application Hexagon socket screws Design Stainless steel, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! L-keys with a thermoplastic sleeve are manufactured out of easy-to-grip, circular material. The sleeve ensures that work is safe and comfortable even at low temperatures. High corrosion protection features thanks to the special BlackLaser surface treatment. Colour coding and large stamp to enable the desired L-key to be easily located. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950/9 Hex-Plus Multicolour Stainless 1 L-key set, metric, stainless, 9 pieces 9x 3950 SPKL Multicolour L-key, metric, stainless: 1.5x90 mm, 2x101 mm, 2.5x112 mm, 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm, 10x224 mm kts: socket wrench set metric stainless steel 9-piece kpn: 3950/9 Hex-Plus Multicolour Stainless 1 kpn_dash: 3950/9 Hex kpn_clear: 39509HexPlusMulticolourStainless1 bkpn: WERA 3950/9 Hex-Plus Multicolour Stainless 1 bkpn_clear: WERA 39509HexPlusMulticolourStainless1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools allen key set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022669001 sr_ns: WERA05022669001
r: 02106249 p: 269.38 pid: 44429 b: WERA q: 0 st: lt: 7 ean: 4013288126610 sr: WERA 05160785001 sr_no_br: 05160785001 sr_no_br_cl: 05160785001 sr_cl: WERA05160785001 sr_dash: sold: 9967.06 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/4" Supplied in Case Quantity per set 42 Product Range Wera Zyklop n: WERA 8100 SA/SC 2 zyklop speed ratchet set, 1/4 drive and 1/2" drive, metric (43 -piece) - 05160785001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 43-piece Zyklop set in robust metal case: Zyklop ratchet with 1/4"drive and Zyklop ratchet with 1/4"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/4" square sockets as well as 1/4" adaptors with square drive, equipped with ball lock. Including 21 Zyklop sockets, 2 Zyklop extensions with free-turning sleeve, 1 Kraftform bit holder with quick-release chuck, 16 bits. Take it easy Tool Finder with colour coding according to sizes. Combines five different types of a ratchet in one Flywheel design and easy-to-grip free-turning sleeve for very high working speeds 43-piece set in a robust metal case Fine-pitched teeth for small return angle; switchover ring (right, fixed, left) With Take it easy tool finder: colour coding by size 43 piece set, in strong metal case1 Zyklop ratchet with 1/4" drive, 1 Zyklop ratchet with 1/2" drive, 21 Zyklop sockets (metric), 2 Zyklop "flexible-lock" extensions (long) with freewheel sleeve, 1 adaptor with quick-release chuck, 1 Kraftform bitholding screwdriver with Rapidaptor quick-release chuck, 16 bits Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. Perfectly conceived in every detail: the storage case for the Zyklop Speed ratchet sets! The two-tone foam insert section means that the tools can be quickly and reliably replaced, and that missing tools can be detected immediately. The tools and their position can be clearly seen in the lid where they have been laser-etched, ensuring that they are legible even when the insert section is covered with grease, dirt or oil. Additionally, the foam section can be removed and placed in the drawer of a tool cabinet or trolley. ds: dsc: Scope of delivery 8100 SA/SC 2 Zyklop Speed Ratchet Set, 1/4" drive and 1/2" drive, metric, 43 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 11x 8790 HMA Zyklop 1/4" socket: 4x23 mm, 4.5x23 mm, 5x23 mm, 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 9x23 mm, 10x23 mm, 12x23 mm, 13x23 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 1x 8796 LA Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8000 C Zyklop Speed Ratchet with 1/2" drive: 1/2" x 277 mm 10x 8790 HMC Zyklop socket with 1/2" drive: 13x37 mm, 14x37 mm, 15x37 mm, 16x37 mm, 17x37 mm, 18x37 mm, 19x37 mm, 21x37 mm, 22x37 mm, 24x37 mm 1x 8796 LC Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/2": 1/2" x 250 mm 1x 816 R Bitholding screwdriver with Rapidaptor quick-release chuck: 1/4" x 119 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 867/4 Z TORX® BO bits with bore hole: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm kts: zyklop speed ratchet set, 1/4 drive and 1/2" drive, metric (43 -piece) kpn: 8100 SA/SC 2 kpn_dash: kpn_clear: 8100SASC2 bkpn: WERA 8100 SA/SC 2 bkpn_clear: WERA 8100SASC2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05160785001 sr_ns: WERA05160785001
r: 02865675 p: 147.603 pid: 31682 b: WERA q: 0 st: lt: 8 ean: 4013288193230 sr: WERA 05075622001 sr_no_br: 05075622001 sr_no_br_cl: 05075622001 sr_cl: WERA05075622001 sr_dash: sold: 9594.195 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 40 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analog Adjustable torque range 40-200 Nm Max. tightening torque 200 Nm Product Range Wera Click-Torque n: WERA Click-Torque C 3 torque spanner with ratchet, 40-200 Nm, 1/2" x 40-200 Nm - 05075622001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand use (clockwise torque-control) and with 45-tooth reversible ratchet mechanism. With 1/2" square head drive, reversible ratchet, 45 teeth Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 40-200 Nm; precision ±3 % as per DIN EN ISO 6789-1:2017-07 With ergonomic 2-component handle suitable for right-hand use Application For clockwise torque-control Precision ± 3% of set value, as per DIN EN ISO 6789-1: 2017-07 Design With 1/2" square drive, reversible ratchet, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The reversible Click-Torque wrenches are for right-handed use. ds: dsc: Scope of delivery Click-Torque C 3 torque wrench with reversible ratchet, 40-200 Nm, 1/2" x 40-200 Nm kts: torque spanner with ratchet, 40-200 Nm, 1/2" x 40-200 Nm kpn: Click-Torque C 3 kpn_dash: Click kpn_clear: ClickTorqueC3 bkpn: WERA Click-Torque C 3 bkpn_clear: WERA ClickTorqueC3 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools torque wrench | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075622001 sr_ns: WERA05075622001
r: 02712101 p: 27.933 pid: 43730 b: WERA q: 12 st: 1 lt: 1 ean: 4013288180841 sr: WERA 05022089001 sr_no_br: 05022089001 sr_no_br_cl: 05022089001 sr_cl: WERA05022089001 sr_dash: sold: 9581.019 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm Max. width across flats 2.5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus Multicolour 1 socket wrench set metric BlackLaser 9-piece - 05022089001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description L-keys with plastic sleeve (SPKL) made of circular, easy-grip material. The sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their colour coding and size markings. The wear-free material of the clip guarantees easy removal and a secure hold of the L-keys. For hexagonal socket screws. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer L-keys are quickly to hand thanks to their size markings Wear-resistant size marking Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design BlackLaser surface, durable plastic sleeve. The contrasting inscriptions on the colour-coded sleeves mean that it is easy to recognise the correct sizes and this makes it simpler to find the right tool. Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. L-keys made from circular material fit into the hand better and allow less strenuous work over a longer period. Additionally, the rubber sleeve provides a pleasant grip, particularly in applications at low temperatures. Colour coding and large stamp enable the desired L-key to be easily located. Moreover, the round material keys are more robust, particularly where smaller sizes are concerned. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus Multicolour 1 L-key set, metric, BlackLaser, 9 pieces 9x 950 SPKL L-key Multicolour, metric: 1.5x90 mm, 2x101 mm, 3x123 mm, 4x137 mm, 5x154 mm, 6x172 mm, 8x195 mm, 10x224 mm, 2.5x112 mm kts: socket wrench set metric BlackLaser 9-piece kpn: 950/9 Hex-Plus Multicolour 1 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlusMulticolour1 bkpn: WERA 950/9 Hex-Plus Multicolour 1 bkpn_clear: WERA 9509HexPlusMulticolour1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools allen key set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022089001 sr_ns: WERA05022089001
r: 03061488 p: 107.272 pid: 33788 b: WERA q: 3 st: 1 lt: 1 ean: 4013288214195 sr: WERA 05020231001 sr_no_br: 05020231001 sr_no_br_cl: 05020231001 sr_cl: WERA05020231001 sr_dash: sold: 9439.936 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Min. width across flats 8 mm Max. width across flats 19 mm Supplied in Case Quantity per set 11 Product Range Wera Joker n: WERA 6003 Joker 11 Set 1 ring spanner set 11-piece - 05020231001 cn: COMBINATION SPANNER SET cn2: COMBINATION SPANNER SET cn_clear: COMBINATIONSPANNERSET d: Product description As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be "taken" every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank Suitable for docking with the Wera 2go system Combination wrench set, open side offset by 7.5°11-piece setIn robust pouch Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back. ds: dsc: Scope of delivery 6003 Joker 11 Set 1 Combination wrench set, 11 pieces 11x 6003 Joker Combination wrench: 8x115 mm, 10x125 mm, 11x135 mm, 12x148 mm, 13x160 mm, 14x167 mm, 15x174 mm, 16x182 mm, 17x190 mm, 18x210 mm, 19x230 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: ring spanner set 11-piece kpn: 6003 Joker 11 Set 1 kpn_dash: kpn_clear: 6003Joker11Set1 bkpn: WERA 6003 Joker 11 Set 1 bkpn_clear: WERA 6003Joker11Set1 c_path: Home / Tools / Hand tools / Keys / Sets / Combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera combination spanner set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools combination wrench set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020231001 sr_ns: WERA05020231001
r: 41071384 p: 299.834 pid: 71362 b: WERA q: 0 st: lt: 12 ean: 4013288121189 sr: WERA 05003645001 sr_no_br: 05003645001 sr_no_br_cl: 05003645001 sr_cl: WERA05003645001 sr_dash: sold: 9294.854 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1/2" Supplied in Case Quantity per set 37 Product Range Wera Zyklop n: WERA 8100 SC 2 zyklop speed ratchet set, 1/2 drive, metric (37 pieces) - 05003645001 cn: BIT AND HAND SOCKET SET cn2: BIT AND HAND SOCKET SET cn_clear: BITANDHANDSOCKETSET d: Product description 37-piece Zyklop set in robust metal case: Zyklop ratchet with 1/2"drive. The 72 fine-pitched teeth enable a low return angle of only 5°. The ratchet head pivots freely and can be locked into any position by using the slide switch that is positioned on either side. It is even possible to work conveniently in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking positions at 0°, 15° und 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The ratchet can be used as a conventional screwdriver in the 0° position by attaching an adaptor and a bit. The flywheel design ensures rapid screwdriving. The rotation-symmetric construction of the Kraftform handle and the free-turning sleeve support rapid twisting. The outstanding design of the Kraftform handle fits perfectly into the hand preventing hand injuries such as blisters and calluses. The hard materials used for the handle ensure quick and easy hand repositioning without any danger of the skin "sticking" to the handle. The softer anti-slip zones enable the low-loss transfer of high torque. For 1/2" square sockets as well as 1/2" adaptors with square drive, equipped with ball lock. Including 17 Zyklop sockets, 2 Zyklop extensions with free-turning sleeve, 1 T-handle, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 13 bits. Take it easy Tool Finder with colour coding according to sizes. The Wera Zyklop Speed is a really fast mover Combines five different types of a ratchet in one 37-piece set in a robust metal case Freely pivoting ratchet head With Take it easy tool finder: colour coding by size 37-piece set in strong metal case 1 Zyklop ratchet with 1/2" drive, 17 Zyklop sockets (metric), 2 Zyklop "flexible-lock" extensions (short and long) with free-tuning sleeve, 1 sliding T-handle, 1 universal joint, 1 "Wobble" extension, 1 adaptor with quick-release chuck, 13 bits Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. The Zyklop Speed ratchets are really fast movers. The gyrating mass design means that screwdriving is accelerated. The rotation-symmetric structure of the Kraftform handle and the free-turning sleeve reinforce this rapid twisting process, particularly when the ratchet does not engage due to too little resistance in the thread. All Zyklop Speed ratchets feature a thumbwheel that can be used to quickly and easily switch between clockwise and anticlockwise rotation, at any position. No complicated handling, no loss of time! The reversible ratchet with 72 fine-pitched teeth has a low return angle of only 5°. This short stroke allows fast and precise work in all types of installation. The ratchet can be used as a conventional screwdriver in the 0° position by attaching a bitholding adaptor and a bit. Perfectly conceived in every detail: the storage case for the Zyklop Speed ratchet sets! The two-tone foam insert section means that the tools can be quickly and reliably replaced, and that missing tools can be detected immediately. The tools and their position can be clearly seen in the lid where they have been laser-etched, ensuring that they are legible even when the insert section is covered with grease, dirt or oil. Additionally, the foam section can be removed and placed in the drawer of a tool cabinet or trolley. ds: dsc: Scope of delivery 8100 SC 2 Zyklop Speed Ratchet Set, 1/2" drive, metric, 37 pieces 1x 8000 C Zyklop Speed Ratchet with 1/2" drive: 1/2" x 277 mm 17x 8790 HMC Zyklop socket with 1/2" drive: 10x37 mm, 11x37 mm, 12x37 mm, 13x37 mm, 14x37 mm, 15x37 mm, 16x37 mm, 17x37 mm, 18x37 mm, 19x37 mm, 20x37 mm, 21x37 mm, 22x37 mm, 24x37 mm, 27x40 mm, 30x42 mm, 32x42 mm 1x 8789 C Zyklop sliding T-handle, 1/2": 1/2" x 250 mm 1x 8794 C Zyklop wobble extension, 1/2": 1/2" x 52 mm 1x 8795 C Zyklop universal joint, 1/2": 1/2" x 69 mm 1x 8784 C2 Zyklop bit adaptor, 1/2", 5/16": 5/16" x 1/2" x 50 mm 1x 8796 SC Zyklop "flexible-lock" extension with free-turning sleeve, short, 1/2": 1/2" x 125 mm 1x 8796 LC Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/2": 1/2" x 250 mm 1x 851/2 Z bits: PH 3 x 32 mm 1x 855/2 Z bits: PZ 3 x 32 mm 7x 867/2 Z TORX® bits: TX 25x35 mm, TX 20x35 mm, TX 30x35 mm, TX 40x35 mm, TX 45x35 mm, TX 50x35 mm, TX 55x35 mm 4x 840/2 Z Bits: 5x30 mm, 6x30 mm, 8x30 mm, 10x30 mm kts: zyklop speed ratchet set, 1/2 drive, metric (37 pieces) kpn: 8100 SC 2 kpn_dash: kpn_clear: 8100SC2 bkpn: WERA 8100 SC 2 bkpn_clear: WERA 8100SC2 c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Bit and hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera bit and hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003645001 sr_ns: WERA05003645001
r: 03261641 p: 1818.842 pid: 70637 b: WERA q: 0 st: lt: 16 ean: 4013288225085 sr: WERA 05150130001 sr_no_br: 05150130001 sr_no_br_cl: 05150130001 sr_cl: WERA05150130001 sr_dash: sold: 9094.21 p_range: none type: standard act: 1 avo: 1 av: Width 785 mm Depth 518 mm Height 1020 mm Number of drawers 7 Color Black Material (worktop) Plastic VDE approved No Weight 94 kg Quantity per set 94 n: WERA 9700 Tool Rebel tool trolley 1 black with 7 drawers (2 filled) 94-piece - 05150130001 cn: EQUIPPED TOOL TROLLEY cn2: EQUIPPED TOOL TROLLEY cn_clear: EQUIPPEDTOOLTROLLEY d: Product description Exclusive roller cabinet in the Tool Rebel design. Five flat and two high drawers ensure efficient, mobile organization of tools and materials. Extremely robust design thanks to a double-walled design and the completely welded construction of the entire body. For daily hard work in the workshop. Equipped with four Wera foam inserts: 9710 foam insert screwdriver set 1, 9720 foam insert 8000 A Zyklop ratchet set 1, 9731 foam insert 6003 Joker ring spanner set 1, 9740 foam insert L-key set 1. Exclusive roller cabinet in the Tool Rebel design Extremely robust thanks to a double-walled design With 7 drawers (5 flat, 2 high) - of which 2 flat drawers are equipped with foam inserts and tools (e.g. with Zyklop Speed ratchet and accessories, Joker spanners, Kraftform screwdrivers, L-keys) Dimensions flat drawers (width x height x depth): 522 x 81 x 398 mm Dimensions high drawers (width x height x depth): 522 x 166 x 398 mm Exclusive roller cabinet in the Tool Rebel design. Five flat and two high drawers ensure efficient, mobile organization of tools and materials. Extremely robust design thanks to a double-walled design and the completely welded construction of the entire body. For daily hard work in the workshop. Equipped with four Wera foam inserts: 9710 foam insert screwdriver set 1, 9720 foam insert 8000 A Zyklop ratchet set 1, 9731 foam insert 6003 Joker ring spanner set 1, 9740 foam insert L-key set 1. Features and benefits Exclusive roller cabinet in the Tool Rebel design The double-walled design and the completely welded construction make the Tool Rebel roller cabinet extremely robust. The optimized yielding edge protection on all four corners ensures reliable impact protection thanks to an internal cushioning action. The large storage and work surface is made of solvent-resistant plastic and, being also completely sealed, the inside of the trolley is protected from leaking liquids. The ergonomically designed handlebar ensures that the roller cabinet is highly manoeuvrable. Durable handle thanks to the black powder-coated metal design. The drawers are equipped with ball bearing telescopic slides and can be pulled out completely. Self-closing and mutually locking to prevent unintentional opening, thus minimal risk of tilting of the roller cabinets. The carefully considered drawer design allows optimal use of the interior space. The dirt-resistant drawer coating makes cleaning easy. The ergonomically arranged lateral position of the lock improves usability and protects the key and lock from damage. The extremely robust locking system protects the tools stored in the roller cabinet against unauthorized access. The central locking is completed by a cylinder lock. Two folding keys are included. The Tool Rebel roller cabinet has large wheels, each with a load of 250 kg, with precision ball bearings and double ball rims in the spindle carrier. The workshop trolley is easy to move, even under high dynamic loads. The two swivel castors are equipped with a double stop: The locked castor reliably prevents it from rolling away, the locked spindle carrier prevents the castors from turning unintentionally, e.g. on sloped surfaces. The oil- and acid-resistant elastic wheels ensure smooth running. A protective ring prevents the ingress of dirt and threads. ds: dsc: Scope of delivery 9700 Tool Rebel Roller Cabinet 1, 94 pieces 1x 9710 Foam insert screwdriver set 1, 18 pieces 2x 932 A Screwdriver for slotted screws: 1x5.5x100 mm, 1.2x7x125 mm 3x 350 PH Screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm, PH 3x150 mm 1x 350 PH Phillips-head Stubby/carburetor screwdriver: PH 2 x 25 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 2x 335 Screwdriver for slotted screws: 0.8x4x100 mm, 1x5.5x125 mm 1x 334 Screwdriver for slotted screws: 1.2 x 6.5 x 150 mm 1x 335 Stubby/carburetor screwdriver: 1 x 5.5 x 24.5 mm 1x 2050 PH Screwdriver for Phillips screws for electronic applications: PH 0 x 40 mm 1x 2035 Screwdriver for slotted screws for electronic applications: 0.40 x 2.5 x 80 mm 2x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm 1x 1441 SB Screw gripper attachment for screwdriver blades, long bits and L-keys, with holding function for screws: 4.5-6 x 41 mm 1x 1442 Screw Gripper: 6.0-8.5 x 41 mm 1x 9810 Foam insert screwdriver set 1, empty: 344 x 30 x 392 mm 1x 9720 Foam insert 8000 A Zyklop 1/4" ratchet set 1, 37 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 1x 8794 LA Zyklop extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 1x 8795 A Zyklop universal joint, 1/4": 1/4" x 35.5 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 14x 8790 HMA Zyklop 1/4" socket: 4x23 mm, 4.5x23 mm, 5x23 mm, 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 9x23 mm, 10x23 mm, 11x23 mm, 12x23 mm, 13x23 mm, 14x23 mm, 15x23 mm 9x 8767 A HF TORX® Zyklop bit socket with holding function, 1/4" drive: TX 8x28 mm, TX 9x28 mm, TX 10x28 mm, TX 15x28 mm, TX 20x28 mm, TX 25x28 mm, TX 27x28 mm, TX 30x28 mm, TX 40x28 mm 9x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 3x28 mm, 4x28 mm, 4x100 mm, 5x28 mm, 5x100 mm, 6x28 mm, 6x100 mm, 8x28 mm, 8x100 mm 1x 9820 Foam insert 8000 A Zyklop 1/4" ratchet set 1, empty: 172 x 30 x 392 mm 1x 9731 Foam insert 6003 Joker set 1, 19 pieces 18x 6003 Joker Combination wrench: 6x105 mm, 7x110 mm, 8x115 mm, 9x120 mm, 10x125 mm, 11x135 mm, 12x148 mm, 13x160 mm, 14x167 mm, 15x174 mm, 16x182 mm, 17x190 mm, 18x210 mm, 19x230 mm, 20x230 mm, 21x260 mm, 22x260 mm, 24x280 mm 1x Bottle opener: 148 1x 9831 Foam insert 6003 Joker Set 1, empty: 344 x 30 x 392 mm 1x kts: tool trolley 1 black with 7 drawers (2 filled) 94-piece kpn: 9700 Tool Rebel kpn_dash: kpn_clear: 9700ToolRebel bkpn: WERA 9700 Tool Rebel bkpn_clear: WERA 9700ToolRebel c_path: Home / Tools / Hand tools / Mixed sets / Sets in suitcase, car, cabinet, module,... / Equipped tool trolley | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera sets in suitcase, car, cabinet, module,... / Wera equipped tool trolley sr_no_br_cl_ns: 05150130001 sr_ns: WERA05150130001
r: 03166813 p: 118.966 pid: 31906 b: WERA q: 9 st: 1 lt: 1 ean: 4013288209542 sr: WERA 05135870001 sr_no_br: 05135870001 sr_no_br_cl: 05135870001 sr_cl: WERA05135870001 sr_dash: sold: 8803.484 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 35 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt W 2 Service 35-piece tool set in fabric case - 05135870001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Compact tool set with the most important screwdriving tools for maintenance jobs both indoors as well as outdoors. One Kraftform 817 VDE bladeholding screwdriver solely for Wera VDE blades; 12 VDE blades (each 157 mm length) with Take it easy tool finder with colour coding by profile and laser-engraved size indication; 1 Joker double open-ended wrench with holding function, limit stop, small return angle and extremely high-grip toothing; incl. the incredibly fast 1/4" Zyklop Speed ratchet with accessories; 8 manual and power tool sockets in the dimensions 5.5-13, 1 universal bit holder; 7 25mm bits; 1 screw gripper to firmly hold screws; textile box that is very robust and durable; can be positioned upright in the workshop shelf for tidy storage; additional surface protection thanks to the textile outer material; low weight and volume for simplified mobility. Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions Manual and power tool sockets (non-impact) with ball-stop groove and knurling at lower end for more grip Joker double open-end wrench with holding function, limit stop, small return angle and extremely gripping teeth VDE-insulated Kraftform 817 VDE bladeholding screwdriver with anti-roll protection VDE blades (157 mm length) with practical spinning function, anti-roll protection and Take it easy tool finder: colour coding by profile and laser-engraved size indication 35-piece set; in surface-protecting, compact textile box, highly robust; low volume and weight for simplified mobility. Compact tool set with the most important screwdriving tools for maintenance jobs both indoors as well as outdoors. One Kraftform 817 VDE bitholding screwdriver solely for Wera VDE blades; 12 VDE blades (each 157 mm length) with Take it easy toolfinder with colour coding by profile and laser-engraved size indication; 1 Joker double open-ended wrench with holding function, limit stop, small return angle and extremely high-grip toothing; incl. the incredibly fast 1/4" Zyklop Speed ratchet with accessories; 8 manual and power tool sockets in the dimensions 5.5-13, 1 universal bit holder; 7 25mm bits; 1 screw gripper to firmly hold screws; textile box that is very robust and durable; can be positioned upright in the workshop shelf for tidy storage; additional surface protection thanks to the textile outer material; low weight and volume for simplified mobility. Features and benefits The perfect set for diverse maintenance jobs both indoors as well as outdoors - applications: electronics, mechatronics, building technology, photovoltaic etc. etc. etc. The Kraftform Kompakt VDE blades are equipped with the Take it easy Tool finder. The colour coding by profile and the laser-engraved size indication make it easy to identify the required tool quickly. The handle/interchangeable blade system allows rapid exchange of the blades required for a wide range of applications. 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The textile boxes offer dramatically improved portability, and are space-saving to boot! This means you can now carry the same collection of tools, in a much more compact and comfortable package. The hassle of running back and forth for the right tools has now become a thing of the past. And the much lower weight of a set makes carrying more convenient than ever before. The textile box including the tool will even survive a fall undamaged. ds: dsc: Scope of delivery Kraftform Kompakt W 2 Maintenance, 35 pieces 1x 817 VDE Kraftform blade-holding handle: 9 x 98 mm 1x Kraftform Kompakt VDE 60 i Take it easy: 0.4 x 2.5 x 157 mm 3x Kraftform Kompakt VDE 60 iS Take it easy: 0.6x3.5x157 mm, 0.8x4x157 mm, 1x5.5x157 mm 2x Kraftform Kompakt VDE 62 iS Take it easy: PH 1x157 mm, PH 2x157 mm 2x Kraftform Kompakt VDE 65 iS Take it easy: PZ 1x157 mm, PZ 2x157 mm 1x Kraftform Kompakt VDE 67 i TORX® Take it easy: TX 10 x 157 mm 3x Kraftform Kompakt VDE 67 iS TORX® Take it easy: TX 15x157 mm, TX 20x157 mm, TX 25x157 mm 1x 1440 Screw Gripper: 4.5-6 x 41 mm 1x 335 Screwdriver for slotted screws: 0.4 x 2.5 x 60 mm 1x 6002 Joker Double Open end wrenches: 10 x 13 x 167 mm 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 1x 8784 A1 Zyklop bit adaptor, 1/4": 1/4" x 37 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 8x 8790 HMA Zyklop 1/4" socket: 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 10x23 mm, 11x23 mm, 12x23 mm, 13x23 mm 1x 893/4/1 K Universal Bit Holder: 1/4" x 50 mm 2x 851/1 Z bits: PH 1x25 mm, PH 2x25 mm 4x 840/1 Z bits: 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm 1x 867/1 TORX® bits: TX 25 x 25 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: 35-piece tool set in fabric case kpn: Kraftform Kompakt W 2 Service kpn_dash: kpn_clear: KraftformKompaktW2Service bkpn: WERA Kraftform Kompakt W 2 Service bkpn_clear: WERA KraftformKompaktW2Service c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools tool set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05135870001 sr_ns: WERA05135870001
r: 03166818 p: 183.305 pid: 31354 b: WERA q: 2 st: 1 lt: 1 ean: 4013288190994 sr: WERA 05003755001 sr_no_br: 05003755001 sr_no_br_cl: 05003755001 sr_cl: WERA05003755001 sr_dash: sold: 8798.64 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 42 Product Range Wera Zyklop n: WERA 8100 SA All-In Zyklop Speed ratchet set 1/4" drive with holding function, metric, 42 pieces - 05003755001 cn: TOOL SET cn2: TOOL SET cn_clear: TOOLSET d: Product description Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. Take it easy Tool Finder with colour coding according to sizes. 42-piece ratchet set in robust textile box Freely pivoting ratchet head with 5 predefined locking positions Bit-sockets with all the advantages of the Wera bit technology TORX®, Hex-Plus and hexagon nuts with holding function for screws / nuts Compatible with Wera 2go 42-piece set; in a surface-preserving, compact and extremely robust textile box; low volume and weight for simplified mobility. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets. 1 Zyklop Speed Ratchet with 1/4" drive, 13 Zyklop sockets with 1/4" drive with fastener holding function, 9 Zyklop bit sockets for TORX® screws, with 1/4" drive, with holding function, 8 bit sockets for hexagon socket screws with 1/4" drive with holding function (sizes 2.0 and 2.5 without holding function) and Hex-Plus high torque geometry, 3 Zyklop bit sockets with 1/4" drive for Phillips screws, 3 Zyklop bit sockets with 1/4" drive for Pozidriv screws, 2 Zyklop bit sockets with 1/4" drive for slotted screws, Take it easy tool finder: Colour coding to enable the desired bit socket to be easily selected, 1 tool for the simple removal of nuts from sockets with holding function, 1 Zyklop extension (long) with free-turning sleeve, 1 "Wobble" extension. Features and benefits Incredibly fast 1/4" Zyklop Speed ratchet with pivoting ratchet head and 5 predefined locking positions 1. Fine-tooth ratchet 2. Flex-head ratchet 3. Angle ratchet 4. Quick-release ratchet 5. Power ratchet 6. Screwdriver The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! The clamping of the screw is achieved by a flexible locking ball. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. The clamping of the screw is achieved by a twin spring loaded ball retention system. The tubing is effectively protected against mechanical wear and tear by a steel ring. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). This tool enables hexagon nuts to be easily removed from sockets with holding function. The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. ds: dsc: Scope of delivery 8100 SA All-in Zyklop Speed Ratchet Set, 1/4" drive, with holding function, metric, 42 pieces 1x 8000 A Zyklop Speed Ratchet with 1/4" drive: 1/4" x 152 mm 1x 8796 LA Zyklop "flexible-lock" extension with free-turning sleeve, long, 1/4": 1/4" x 150 mm 1x 8794 A Zyklop wobble extension, 1/4": 1/4" x 56 mm 13x 8790 HMA HF Zyklop socket with 1/4" drive with holding function: 4x23 mm, 4.5x23 mm, 5x23 mm, 5.5x23 mm, 6x23 mm, 7x23 mm, 8x23 mm, 9x23 mm, 10x23 mm, 11x23 mm, 12x23 mm, 13x23 mm, 14x23 mm 9x 8767 A HF TORX® Zyklop bit socket with holding function, 1/4" drive: TX 8x28 mm, TX 9x28 mm, TX 10x28 mm, TX 15x28 mm, TX 20x28 mm, TX 25x28 mm, TX 27x28 mm, TX 30x28 mm, TX 40x28 mm 2x 8740 A Zyklop bit socket, 1/4" drive: 2x28 mm, 2.5x28 mm 6x 8740 A HF Zyklop bit socket with holding function, 1/4" drive: 3x28 mm, 4x28 mm, 5x28 mm, 6x28 mm, 7x28 mm, 8x28 mm 3x 8751 A Phillips Zyklop bit socket, 1/4" drive: PH 1x28 mm, PH 2x28 mm, PH 3x28 mm 3x 8755 A Pozidriv Zyklop bit socket, 1/4" drive: PZ 1x28 mm, PZ 2x28 mm, PZ 3x28 mm 2x 8700 A FL Slotted screws Zyklop bit socket, 1/4" drive: 0.8x5.5x28 mm, 1.2x6.5x28 mm 1x Nut Extractor: 43 x 14 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Zyklop Speed ratchet set 1/4" drive with holding function, metric, 42 pieces kpn: 8100 SA All-In kpn_dash: 8100 SA All kpn_clear: 8100SAAllIn bkpn: WERA 8100 SA All-In bkpn_clear: WERA 8100SAAllIn c_path: Home / Tools / Hand tools / Mixed sets / Single sets / Tool set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera mixed sets / Wera single sets / Wera tool set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003755001 sr_ns: WERA05003755001
r: 02865672 p: 140.33 pid: 33566 b: WERA q: 8 st: 1 lt: 1 ean: 4013288193223 sr: WERA 05075621001 sr_no_br: 05075621001 sr_no_br_cl: 05075621001 sr_cl: WERA05075621001 sr_dash: sold: 8139.14 p_range: KLIUM_PRODUCT_RANGE_304 type: standard act: 1 avo: 1 av: Min. tightening torque 20 Nm Drive profile size 1/2" VDE approved No With safety colour code 1000V ESD No Display Analog Adjustable torque range 20-100 Nm Max. tightening torque 100 Nm Product Range Wera Click-Torque n: WERA Click-Torque C 2 torque spanner with ratchet, 20-100 Nm, 1/2" x 20-100 Nm - 05075621001 cn: TORQUE WRENCH cn2: TORQUE WRENCH cn_clear: TORQUEWRENCH d: Product description Click-Torque wrench in the unmistakable, robust Wera design with high accuracy as per DIN EN ISO 6789-1: 2017-07. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. The robust release mechanism guarantees a clearly audible and tactile release signal when the set torque is reached. For right-hand use (clockwise torque-control) and with 45-tooth reversible ratchet mechanism. With 1/2" square head drive, reversible ratchet, 45 teeth Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values Audible and tactile release mechanism when the set torque value is reached Measuring range: 20-100 Nm; precise to ± 3% as per DIN EN ISO 6789-1:2017-07 With ergonomic 2-component handle suitable for right-hand use Application For clockwise torque-control Precision ± 3% of set value, as per DIN EN ISO 6789-1: 2017-07 Design With 1/2" square drive, reversible ratchet, 45 teeth; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached (fine scale only in Newton meters), audible and tactile release mechanism when the set torque value is reached Handle Ergonomic 2-component handle Features and benefits Click-Torque Wrench series We wanted working with torque wrenches to be simple and accurate which is why we developed the Click-Torque wrenches. With the ability to set and save the default values and with the unmistakable, robust Wera design, these torque wrenches are the ideal tools for all bolting applications that require torque-controlled tightening (clockwise torque wrenches) and tightening and loosening (torque wrenches for insert tools). Precision of ±3 % as per DIN EN ISO 6789-1:2017-07. Easy setting and saving of the desired torque value; easy to read on main and fine scales. With audible and tactile locking when the scale values are reached. On reaching the desired torque value, an audible and tactile mechanism is triggered. The reversible Click-Torque wrenches are for right-handed use. ds: dsc: Scope of delivery Click-Torque C 2 torque wrench with reversible ratchet, 20-100 Nm, 1/2" x 20-100 Nm kts: torque spanner with ratchet, 20-100 Nm, 1/2" x 20-100 Nm kpn: Click-Torque C 2 kpn_dash: Click kpn_clear: ClickTorqueC2 bkpn: WERA Click-Torque C 2 bkpn_clear: WERA ClickTorqueC2 c_path: Home / Tools / Hand tools / Torque tools / Torque wrenches / Torque wrench | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque wrenches / Wera torque wrench | Home / Our brands / Wera / Wera Ranges / Wera click-torque sr_no_br_cl_ns: 05075621001 sr_ns: WERA05075621001
r: 03166934 p: 58.512 pid: 21495 b: WERA q: 0 st: lt: 14 ean: 4013288203946 sr: WERA 05057697001 sr_no_br: 05057697001 sr_no_br_cl: 05057697001 sr_cl: WERA05057697001 sr_dash: sold: 7957.632 p_range: KLIUM_PRODUCT_RANGE_303 type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 30 Product Range Wera Bit-Check n: WERA Bit-Check 30 Impaktor 2 screwdriver bit set, 30-piece - 05057697001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description 1 Impaktor holder with retaining ring and magnet, 29 Impaktor bits. The Impaktor technology offers an above-average service life even under extreme circumstances thanks to the best possible utilisation of the material properties and the optimised geometry; particularly suitable for use with customary impact drivers; holder with ring magnet for simple holding of even longer and heavier screws, ideal for overhead work. The rough diamond-coating of the bits reduces the risk of a slipping out of the screw head thanks to the enhanced frictional resistance. Upright positionable, multi-component Bit-Check Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out Impaktor holder with retaining ring and magnet for bits with 1/4" hexagon head drive 1 Impaktor holder with retaining ring and magnet in the mounting for secure fitting of the bits in the holder, 29 Impaktor bits. With Take it easy, the bits have a band which allows quick and easy location of the right bit due to its colour and size marking. Features and benefits Impaktor technology for an above-average service life even under extreme demands The Bit-Checks can be positioned upright at the workplace so the tool is always quickly to hand. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. The Impaktor stainless steel holder with a retaining ring and magnet satisfies the extreme, dynamic requirements in that there are consciously no small mechanical component parts fitted as they would be more susceptible to failure. It focuses on the basic bit holding function and the cushioning of the extreme impulse peaks with its two different torsion zones. Mainly used in industrial screw assembly applications e.g. with screwdriving robots. The combination of the double torsion zones in the Impaktor holder and the torsion zone in the Impaktor bit results in the so-called TriTorsion system. ds: dsc: Scope of delivery Bit-Check 30 Impaktor 2, 30 pieces 1x 897/4 IMP Impaktor holder with retaining ring and magnet: 1/4" x 75 mm 7x 851/1 IMP DC Impaktor bits: 2x PH 1x25 mm, 3x PH 2x25 mm, 2x PH 3x25 mm 7x 855/1 IMP DC Impaktor bits: 2x PZ 1x25 mm, 3x PZ 2x25 mm, 2x PZ 3x25 mm 11x 867/1 IMP DC Impaktor TORX® bits: 3x TX 25x25 mm, 2x TX 30x25 mm, 2x TX 40x25 mm, TX 10x25 mm, TX 15x25 mm, 2x TX 20x25 mm 4x 840/1 IMP DC Impaktor bits: 3x25 mm, 4x25 mm, 5x25 mm, 6x25 mm kts: screwdriver bit set, 30-piece kpn: Bit-Check 30 Impaktor 2 kpn_dash: Bit kpn_clear: BitCheck30Impaktor2 bkpn: WERA Bit-Check 30 Impaktor 2 bkpn_clear: WERA BitCheck30Impaktor2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set | Home / Our brands / Wera / Wera Ranges / Wera bit-check sr_no_br_cl_ns: 05057697001 sr_ns: WERA05057697001
r: 03176986 p: 46.115 pid: 31356 b: WERA q: 9 st: 1 lt: 1 ean: 4013288216915 sr: WERA 05020104001 sr_no_br: 05020104001 sr_no_br_cl: 05020104001 sr_cl: WERA05020104001 sr_dash: sold: 7701.205 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 19 mm Length 256 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 24 mm Product Range Wera Joker n: WERA 6004 Joker XL mm self-adjusting spanner, 19-24 x 3/4"-15/16" x 256 - 05020104001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description Many users wish to have a universal screwdriving tool with the widest possible range of applications. It should be a single tool for multiple metric and imperial dimensions. It should automatically adjust to the different screw sizes. It should be safe to grab without damaging anything and should allow for high working speeds. With its continuous and parallel jaws the Joker 6004 replaces several single spanner sizes. The required size is automatically and continuously set when attaching the tool to the hexagon bolt or screw. The integrated lever mechanism securely clamps the hexagon screw or bolt between the jaws, which significantly reduces the risk of slippage or damage. The ratchet feature ensures fast and consistent screwdriving without removing the tool. By using the corner-width rectangular prisms, a back-pivoting angle of only 30° can be achieved. The single-arm design, in conjunction with the ratchet feature and the corner-width prism, makes it possible to work even in confined spaces. The adjustable Joker 6004 is the universal screwdriving tool. Self-setting. Gripping. Spanning. For hexagon screw heads and bolts with wrench sizes 19.0; 20.0; 21.0; 22.0; 24.0 (metric) For hexagon screw heads and bolts with wrench sizes 3/4"; 25/32"; 13/16"; 7/8"; 15/16" (imperial) Automatically and continuously gripping hexagon screws and bolts Lever mechanism upon gripping prevents slipping and damage With mechanical ratchet functionality for fast and consistent screwdriving without removing the spanner Application Hexagon screw heads and bolts with wrench size 19,0; 20,0; 21,0; 22,0; 24,0 (metric) and 3/4"; 25/32"; 13/16"; 7/8"; 15/16" (imperial) Design Self-setting spanner with ratchet function; size-adjustable open end side, parallel smooth jaws; with 30° return angle due to the corner-width rectangular prisms in the jaws; hole for hanging Features and benefits With its automatically and continuously gripping parallel jaws the Joker spanner 6004 covers all dimensions in the respective field of application. The tool automatically finds the required size when placed on the bolt or screw, no setting required. The parallel smooth jaws of the Joker 6004 allow surface pressure and can thus prevent rounding of the bolt or screw head, which can occur during power transmission via the corners. The ratchet feature in the jaw ensures fast and consistent screwdriving without removing the tool. The corner-width rectangular prisms in the jaw allow a return angle of only 30°. Thanks to its hole the Joker can be neatly hung on the workshop wall. ds: dsc: Scope of delivery 6004 Joker XL Self-setting spanner, 19; 20; 21; 22; 24 x 3/4; 25/32; 13/16; 7/8; 15/16" x 256 mm kts: mm self-adjusting spanner, 19-24 x 3/4"-15/16" x 256 kpn: 6004 Joker XL kpn_dash: kpn_clear: 6004JokerXL bkpn: WERA 6004 Joker XL bkpn_clear: WERA 6004JokerXL c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera joker | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools open end wrench sr_no_br_cl_ns: 05020104001 sr_ns: WERA05020104001
r: 03092859 p: 114.214 pid: 32933 b: WERA q: 3 st: 1 lt: 1 ean: 4013288214614 sr: WERA 05057482001 sr_no_br: 05057482001 sr_no_br_cl: 05057482001 sr_cl: WERA05057482001 sr_dash: sold: 7652.338 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hex Type of drive profile (bit) Mixed; Phillips; Pozidriv; Torx; Hexagon; Slotted VDE approved No With safety colour code 1000V ESD No Supplied in Case Quantity per set 19 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt Turbo 1 screwdriver handle with bit set in folding case 19-piece - 05057482001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Many users would like to be able to carry out screwdriving processes faster without compromise. With a screwdriver that is precise, allows powerful screwdriving, and is much faster than a conventional screwdriver. A part-time universal gear is the solution: Integrated in the screwdriver handle, it quadruples the working speed with smooth couplings - purely mechanically. One hand holds the front part of the handle, the other hand turns the rear part of the handle. The turbo function can be switched on or off at the push of a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood, as well as for fine adjustments. Robust, maintenance-free gear made of steel with a maximum torque of 14Nm when the turbo function is deactivated. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward. 4 times the screwdriving speed thanks to the turbo function (purely mechanical - without battery) Activate and deactivate the turbo function by a simple push of a button Turbo function especially for smooth couplings Can be used without the turbo function like a normal screwdriver for couplings with steadily increasing torque, e.g. for screw connections in wood Robust, maintenance-free gear made of steel Folding pouch with 89 mm long bits 19-piece set 1 bitholding Kraftform Turbo with Rapidaptor quick-release chuck Features and benefits The construction of the Kraftform Turbo allows the speed of manual screwdriving to be quadrupled, especially for smooth couplings - without electricity! The turbo function can be activated as needed by pressing a button. Turning it off is recommended for tightening and loosening with high torque, e.g. for screw connections in wood as well as for fine adjustments. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. ds: dsc: Scope of delivery Kraftform Kompakt Turbo 1, 19 pieces 1x 826 T Kraftform Turbo bitholding handle with Rapidaptor quick-release chuck: 1/4" x 146 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 3x 855/4 Z bits: PZ 1x89 mm, PZ 2x89 mm, PZ 3x89 mm 5x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm, TX 30x89 mm 4x 840/4 Z bits: 3x89 mm, 4x89 mm, 5x89 mm, 6x89 mm 3x 800/4 Z bits: 0.8x4x89 mm, 1x5.5x89 mm, 1.2x6.5x89 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: screwdriver handle with bit set in folding case 19-piece kpn: Kraftform Kompakt Turbo 1 kpn_dash: kpn_clear: KraftformKompaktTurbo1 bkpn: WERA Kraftform Kompakt Turbo 1 bkpn_clear: WERA KraftformKompaktTurbo1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05057482001 sr_ns: WERA05057482001
r: 41071234 p: 29.09 pid: 71201 b: WERA q: 14 st: 1 lt: 1 ean: 4013288041708 sr: WERA 05006147001 sr_no_br: 05006147001 sr_no_br_cl: 05006147001 sr_cl: WERA05006147001 sr_dash: sold: 7505.22 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive type Phillips; Slotted VDE approved Yes Supplied in On rack Quantity per set 7 Product Range Wera Kraftform n: WERA 160 i/7 Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece - 05006147001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 7-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including single-pole phase tester and 1 rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver with Lasertip blade, single-pole phase tester and rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Phillips screws Content 7-piece set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/7 Rack Screwdriver set Kraftform Plus Series 100, single-pole phase tester and rack, 7 pieces 2x 162 i PH VDE Insulated screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm kts: Kraftform Plus series 100 screwdriver set + single-pole phase tester in holder 7-piece kpn: 160 i/7 kpn_dash: kpn_clear: 160i7 bkpn: WERA 160 i/7 bkpn_clear: WERA 160i7 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Promotions / Promotions / Black friday / Black friday hand tools / Black friday hand tools screwdriver set | Home / Promotions / Promotions / Black friday / Wera black friday / Wera black friday hand tools | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006147001 sr_ns: WERA05006147001
r: 02830310 p: 39.504 pid: 42764 b: WERA q: 2 st: 1 lt: 1 ean: 4013288144225 sr: WERA 05051011001 sr_no_br: 05051011001 sr_no_br_cl: 05051011001 sr_cl: WERA05051011001 sr_dash: sold: 7268.736 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved No With safety colour code 1000V No Quantity per set 12 Product Range Wera Kraftform n: WERA Kraftform XXL 2 screwdriver set 12-piece - 05051011001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 12-piece all-round screwdriver set. Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially with Lasertip: The tips of the Wera Lasertip screwdrivers are microscopically roughened by laser beams. This rough surface literally bites into the head of the screw. Any unintentional slipping out is therefore a thing of the past. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. For every application the right tool Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head 12-piece screwdriver set for all-round applications. Take it easy tool finder: colour coding according to profile and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The chiseldriver is the solution for jobs that require more than just screwdriving. For fastening, chiselling and loosening seized screws or hose clamps. With an integrated impact cap that extends service live and reduces the risk of splintering. With a pound-thru hexagon blade made from high-grade material for - zero-loss transfer of high forces when struck with a hammer. The tough viscous tempered material prevents the blade from splintering or breaking. More TORQUE can be transferred by attaching an open-jawed or ring spanner to the integrated hexagon bolster. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery Kraftform XXL 2, 12 pieces 1x 350 PH Screwdriver for Phillips screws: PH 2 x 100 mm 2x 355 PZ Screwdriver for Pozidriv screws: PZ 1x80 mm, PZ 2x100 mm 2x 932 A Screwdriver for slotted screws: 1x5.5x100 mm, 1.2x7x125 mm 1x 335 Screwdriver for slotted screws: 0.8 x 4 x 100 mm 3x 367 Screwdriver for TORX® screws: TX 15x80 mm, TX 20x100 mm, TX 25x100 mm 2x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm 1x 247 Single-pole phase tester: 0.5 x 3 x 70 mm 2x Rack for Kraftform screwdrivers: 190 x 50 mm kts: screwdriver set 12-piece kpn: Kraftform XXL 2 kpn_dash: kpn_clear: KraftformXXL2 bkpn: WERA Kraftform XXL 2 bkpn_clear: WERA KraftformXXL2 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05051011001 sr_ns: WERA05051011001
