r: 03176898 p: 46.115 pid: 31940 b: WERA q: 0 st: lt: 15 ean: 4013288218896 sr: WERA 05020507001 sr_no_br: 05020507001 sr_no_br_cl: 05020507001 sr_cl: WERA05020507001 sr_dash: sold: 276.69 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 36 mm Length 460 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (36 x 460 mm) - 05020507001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 36 x 460 mm kts: ring spanner (36 x 460 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020507001 sr_ns: WERA05020507001
r: 08103855 p: 55.33 pid: 70450 b: WERA q: 0 st: lt: 14 ean: 4013288229823 sr: WERA 05051066001 sr_no_br: 05051066001 sr_no_br_cl: 05051066001 sr_cl: WERA05051066001 sr_dash: sold: 276.65 p_range: KLIUM_PRODUCT_RANGE_310 type: standard act: 1 avo: 1 av: VDE approved No ESD No Quantity per set 15 Product Range Wera Kraftform Kompakt n: WERA Kraftform Kompakt 838 RA-R M Imperial Set 1 ratchet screwdriver set 15-piece - 05051066001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description 15-piece ratchet screwdriver set. Bitholding screwdriver with intuitive ratchet functionality. The ratchet mechanism with fine toothing integrated in the handle (36 teeth/return angle 10°) eases and accelerates screwdriving without having to reposition the tool. Spinning the tool is also possible, the ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. Ergonomic switching to clockwise/counterclockwise or position 0. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Magnetic bitholding screwdriver for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor quick-release chuck allows lightning-fast bit changes without any extra tools. The strong permanent magnet holds the bits firmly. 14 tough bits for universal use (Phillips-head Phillips, TORX®, slotted; hexagonal socket und square head), 89 mm length; chemically nickel-plated. Bitholding screwdriver with Rapidaptor quick-release chuck for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4 Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing ensures fast and safe working High working speed: The ratchet mechanism allows to "spin" when screwdriving Ergonomic intuitive switching to clockwise/counterclockwise or position 0 15-piece setOne 838 RA-R M bitholding handle with ratchet functionality, 14 bits, chemically nickel-plated, 1/4", 89 mm length Features and benefits Ratchet mechanism integrated in the handle The integrated ratchet with fine toothing (36 teeth) and a return angle of 10° eases and accelerates screwdriving without having to reposition the tool. The ratchet mechanism also allows fast "spinning" while screwdriving. The integrated ratchet with fine toothing ensures fast and safe working. The ratchet mechanism is completely embedded in the handle. Thanks to the small size of the handle the ratchet can even be used in constricted screwdriving situations. Ergonomic design of the reverse direction switch. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. ds: dsc: Scope of delivery Kraftform Kompakt 838 RA-R M Imperial Set 1, 15 pieces 1x 838 RA-R M Bit-holding handle with ratchet functionality, 1/4": 1/4" x 123.5 mm 3x 851/4 Z bits: PH 1x89 mm, PH 2x89 mm, PH 3x89 mm 4x 867/4 Z TORX® bits: TX 10x89 mm, TX 15x89 mm, TX 20x89 mm, TX 25x89 mm 3x 840/4 Z bits: 1/8"x89 mm, 5/32"x89 mm, 3/16"x89 mm 1x 800/4 Z bits: 1 x 5.5 x 89 mm 3x 868/4 Square-Plus bits: # 1x89 mm, # 2x89 mm, # 3x89 mm 1x Hook and Loop Fastener Strip 70: 50 x 70 mm kts: ratchet screwdriver set 15-piece kpn: Kraftform Kompakt 838 RA-R M Imperial Set 1 kpn_dash: Kraftform Kompakt 838 RA kpn_clear: KraftformKompakt838RARMImperialSet1 bkpn: WERA Kraftform Kompakt 838 RA-R M Imperial Set 1 bkpn_clear: WERA KraftformKompakt838RARMImperialSet1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform kompakt sr_no_br_cl_ns: 05051066001 sr_ns: WERA05051066001
r: 02627556 p: 34.545 pid: 44561 b: WERA q: 0 st: lt: 8 ean: 4013288117281 sr: WERA 05022721001 sr_no_br: 05022721001 sr_no_br_cl: 05022721001 sr_cl: WERA05022721001 sr_dash: sold: 276.36 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 3/32 inch With ball head Yes Supplied in Case Quantity per set 9 Product Range Wera Hex-Plus n: WERA 3950/9 Hex-Plus Imperial Stainless 1 spanner set inch stainless steel 9-piece - 05022721001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set out of stainless steel for imperial hexagonal socket screws by Wera. Stainless steel prevents the formation of extraneous rust. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. Hexagonal ballpoint end on the long arm: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. Includes a practical belt pouch. Solution to the extraneous rust problem: fasten stainless screws with stainless tools Hex-Plus allows socket head screws to live longer Stainless L-keys prevent extraneous rust on stainless screws L-keys are quickly to hand thanks to their size markings In a robust belt pouch 9-piece set in belt pouch Application Hexagon socket screws Design Stainless steel Tip Hex-Plus, ball-end hexagon on long arm Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Stainless L-keys are hardened to the same strength as conventional (carbon) steel tools, and prevent extraenous rust forming. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The spherical drive profile means that it is possible to swivel the axis of the tool to that of the screw, and therefore enable angled, "around-the-corner" screwdriving jobs. The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. ds: dsc: Scope of delivery 3950/9 Hex-Plus Imperial Stainless 1 L-key set, Imperial, stainless, 9 pieces 9x 3950 PKL L-key, Imperial, stainless: 3/32"x112 mm, 7/64"x119 mm, 1/8"x123 mm, 9/64"x130 mm, 5/32"x137 mm, 3/16"x154 mm, 1/4"x185 mm, 5/16"x195 mm, 3/8"x224 mm kts: spanner set inch stainless steel 9-piece kpn: 3950/9 Hex-Plus Imperial Stainless 1 kpn_dash: 3950/9 Hex kpn_clear: 39509HexPlusImperialStainless1 bkpn: WERA 3950/9 Hex-Plus Imperial Stainless 1 bkpn_clear: WERA 39509HexPlusImperialStainless1 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05022721001 sr_ns: WERA05022721001
r: 41070380 p: 11.97 pid: 71763 b: WERA q: 8 st: 1 lt: 1 ean: 4013288004239 sr: WERA 05028008001 sr_no_br: 05028008001 sr_no_br_cl: 05028008001 sr_cl: WERA05028008001 sr_dash: sold: 275.31 p_range: none type: standard act: 1 avo: 1 av: Drive size T15 Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx n: WERA 367 TORX screwdriver, TX 15 x 80 mm - 05028008001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and gentle work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Screwdriver for recessed TORX® screws Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away The Wera Black Point tip offers an exact fit and optimum corrosion protection Application TORX® socket screws Blade Round Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The large contact area - with particularly high friction to the soft zones - results in high torque transfer without any bruising from the edges. The hexagonal non-roll feature prevents any rolling away at the workplace. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 367 Screwdriver for TORX® screws, TX 15 x 80 mm kts: screwdriver, TX 15 x 80 mm kpn: 367 TORX kpn_dash: kpn_clear: 367TORX bkpn: WERA 367 TORX bkpn_clear: WERA 367TORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05028008001 sr_ns: WERA05028008001
r: 41070306 p: 9.17 pid: 71691 b: WERA q: 13 st: 1 lt: 1 ean: 4013288003294 sr: WERA 05110004001 sr_no_br: 05110004001 sr_no_br_cl: 05110004001 sr_cl: WERA05110004001 sr_dash: sold: 275.1 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 4 mm Blade length 100 mm Blade thickness 0,8 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 335 saw blade screwdriver, electrician blade, 0.8 x 4 x 100 mm - 05110004001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver -electrician's blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 335 Screwdriver for slotted screws, 0.8 x 4 x 100 mm kts: saw blade screwdriver, electrician blade, 0.8 x 4 x 100 mm kpn: 335 kpn_dash: kpn_clear: 335 bkpn: WERA 335 bkpn_clear: WERA 335 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110004001 sr_ns: WERA05110004001
r: 02021229 p: 6.1 pid: 44351 b: WERA q: 18 st: 1 lt: 1 ean: 4013288034700 sr: WERA 05059604001 sr_no_br: 05059604001 sr_no_br_cl: 05059604001 sr_cl: WERA05059604001 sr_dash: sold: 274.5 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 50 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 2,5 mm Drive profile size (bit) 2,5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 2.5 x 50 mm - 05059604001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 2.5 x 50 mm kts: hexagon bit, 2.5 x 50 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059604001 sr_ns: WERA05059604001
r: 02318105 p: 13.057 pid: 20789 b: WERA q: 8 st: 1 lt: 1 ean: 4013288017574 sr: WERA 05053870001 sr_no_br: 05053870001 sr_no_br_cl: 05053870001 sr_cl: WERA05053870001 sr_dash: sold: 274.197 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Connection size (machine) 1/4" Connection type (machine) External hexagon With lock No Magnetic Yes Length 77 mm n: WERA 895/4/1 universal bit holder, 1/4" x 77 mm - 05053870001 cn: BIT HOLDER cn2: BIT HOLDER cn_clear: BITHOLDER d: Product description Universal holder for mounting bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. With quick-release chuck for quick bit changes. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for machine use with mounting as per DIN ISO 1173-F 6.3. Universal holder for the take-up of bits with 1/4" hexagon head drive With quick-release chuck and strong permanent magnet 1/4" hexagon drive (Wera connecting series 4) Application Suitable for 1/4" DIN ISO 1173-C 6,3 hexagon insert bits and Wera Series 1 Design With strong permanent magnet and quick-release chuck Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits For a firm, wobble-free connection between holder and bit with quick-release action. Simply push sleeve forward to change bits. The magnetic design enables simplified positioning of the screw. ds: dsc: Scope of delivery 895/4/1 Universal Bit Holder, 1/4" x 77 mm kts: universal bit holder, 1/4" x 77 mm kpn: 895/4/1 kpn_dash: kpn_clear: 89541 bkpn: WERA 895/4/1 bkpn_clear: WERA 89541 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Accessories and spare parts / Bit holder | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera accessories and spare parts / Wera bit holder sr_no_br_cl_ns: 05053870001 sr_ns: WERA05053870001
r: 02831919 p: 10.49 pid: 19355 b: WERA q: 0 st: lt: 9 ean: 4013288175656 sr: WERA 05051274001 sr_no_br: 05051274001 sr_no_br_cl: 05051274001 sr_cl: WERA05051274001 sr_dash: sold: 272.74 p_range: none type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon Overall length 78 mm VDE approved No With safety colour code 1000V ESD No Non-sparking No n: WERA 813 bit holder, 1/4" x 78 mm - 05051274001 cn: BIT SCREWDRIVER cn2: BIT SCREWDRIVER cn_clear: BITSCREWDRIVER d: Product description Premium bitholding screwdriver. Kraftform Plus handle for comfortable ergonomic screwdriving, avoiding blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Bit holder for bits with 1/4" hexagon drive Ergonomic Kraftform handle Hexagonal anti-roll feature against rolling away Magnetic Application Suitable for 1/4" DIN ISO 1173-C 6.3 hexagon insert bits and Wera Series 1 Drive 1/4" hexagon, magnetic Handle Kraftform with non-roll feature, multi-component Features and benefits Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1; 1/4" hexagonal bit mounting, magnetic. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. ds: dsc: Scope of delivery 813 Bitholding screwdriver, 1/4" x 78 mm kts: bit holder, 1/4" x 78 mm kpn: 813 kpn_dash: kpn_clear: 813 bkpn: WERA 813 bkpn_clear: WERA 813 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Bit screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera bit screwdriver sr_no_br_cl_ns: 05051274001 sr_ns: WERA05051274001
r: 02828862 p: 136.198 pid: 42535 b: WERA q: 0 st: lt: 12 ean: 4013288184146 sr: WERA 05020092001 sr_no_br: 05020092001 sr_no_br_cl: 05020092001 sr_cl: WERA05020092001 sr_dash: sold: 272.396 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Type of drive profile Hexagonal Smallest size 7/16 inch Largest size 3/4 inch Quantity per set 4 Product Range Wera Joker n: WERA 6001 Joker Switch 4 Imperial Set 1 socket and ratchet spanner set, Inch, 4-piece - 05020092001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description High quality set of ratcheting combination wrenches by Wera: Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy Tool Finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Set of ratcheting combination wrenches, reversible4-piece setDurable pouch Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch 4 Imperial Set 1 Ratcheting combination wrenches set, Imperial, 4 pieces 4x 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial: 7/16"x165 mm, 1/2"x171 mm, 9/16"x187 mm, 3/4"x246 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: socket and ratchet spanner set, Inch, 4-piece kpn: 6001 Joker Switch 4 Imperial Set 1 kpn_dash: kpn_clear: 6001JokerSwitch4ImperialSet1 bkpn: WERA 6001 Joker Switch 4 Imperial Set 1 bkpn_clear: WERA 6001JokerSwitch4ImperialSet1 c_path: Home / Tools / Hand tools / Keys / Sets / Ratcheting combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratcheting combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020092001 sr_ns: WERA05020092001
r: 41071423 p: 18.016 pid: 72014 b: WERA q: 0 st: lt: 8 ean: 4013288121455 sr: WERA 05003642001 sr_no_br: 05003642001 sr_no_br_cl: 05003642001 sr_cl: WERA05003642001 sr_dash: sold: 270.24 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1 1/2" Connection size 2 1/2" Connection type 1 (extension) Outer square Connection type 2 (extension) Internal square Length 125 mm VDE approved No With safety colour code 1000V No Non-sparking No Product Range Wera Zyklop n: WERA 8796 SC Zyklop "Flexible-Lock" extension with free-running sleeve, short for 1/2", 1/2" x 125 mm - 05003642001 cn: EXTENSION cn2: EXTENSION cn_clear: EXTENSION d: Product description Wera Zyklop extension with flexible-lock: when activated the sockets are secured and permanently fixed, any unintentional loss being avoided. When the system is deactivated, the sockets can be quickly attached and exchanged. Equipped with a free-turning sleeve for faster turning of screws and nuts. 1/2" Zyklop "flexible-lock" extension with free-turning sleeve, short For 1/2" square sockets with ball lock Flexible lock system for either locking or rapid exchange of the attached tool With free-turning sleeve for rapid tightening and loosening of screws and nuts Chrome vanadium steel, matte chrome-plated Application 1/2" square drive sockets with ball lock Design Flexible-lock system either for permanent interlocking or fast change of accessories, free-turning sleeve for rapid tightening or loosening of screws and nuts, chrome vanadium, brushed chrome-plated finish Features and benefits The extensions from the premium lines are also equipped with the unique "flexible-lock-system". By activating this system, attachments can be fixed to the extension permanently - preventing slipping and any unintentional loss of the attachment. When the system is deactivated, the sockets can be attached as usual and changed in a flash. The free-turning sleeve on the Zyklop Speed and the Zyklop extension effectively accelerates the turning of screws and nuts. ds: dsc: Scope of delivery 8796 SC Zyklop "flexible-lock" extension with free-turning sleeve, short, 1/2", 1/2" x 125 mm kts: Zyklop "Flexible-Lock" extension with free-running sleeve, short for 1/2", 1/2" x 125 mm kpn: 8796 SC kpn_dash: kpn_clear: 8796SC bkpn: WERA 8796 SC bkpn_clear: WERA 8796SC c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Extension | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera extension | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003642001 sr_ns: WERA05003642001
r: 87940082 p: 7.107 pid: 74440 b: WERA q: 2 st: 1 lt: 1 ean: 4013288017062 sr: WERA 05050210001 sr_no_br: 05050210001 sr_no_br_cl: 05050210001 sr_cl: WERA05050210001 sr_dash: sold: 270.066 p_range: none type: standard act: 1 avo: 1 av: Drive profile size 1/4" Type of drive profile External square Connection size 1/4" Connection profile External hexagon Length 100 mm n: WERA 870/4 adapter 1/4" x 100 mm - 05050210001 cn: SOCKET ADAPTOR cn2: SOCKET ADAPTOR cn_clear: SOCKETADAPTOR d: Product description Tool shaft (adaptor) for power tool sockets with hexagon head drive by Wera. Drive: 1/4" hexagonal. Adaptor for machine-operated nut spinner sockets 1/4" external square 1/4" hexagon drive (Wera connecting series 4) Application Machine-operated nut spinner sockets Design With external square drive Drive 1/4" hexagon, suitable for power tools with DIN ISO 1173-F 6,3 receiver Features and benefits With locking pin; for machine-operated nut spinner sockets ds: dsc: Scope of delivery 870/4 Adaptor, machine-operated nut spinner sockets, 1/4" x 100 mm kts: adapter 1/4" x 100 mm kpn: 870/4 kpn_dash: kpn_clear: 8704 bkpn: WERA 870/4 bkpn_clear: WERA 8704 c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Socket adaptor | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera socket adaptor sr_no_br_cl_ns: 05050210001 sr_ns: WERA05050210001
r: 87010145 p: 8.18 pid: 70740 b: WERA q: 0 st: lt: 7 ean: 4013288011565 sr: WERA 05059480001 sr_no_br: 05059480001 sr_no_br_cl: 05059480001 sr_cl: WERA05059480001 sr_dash: sold: 269.94 p_range: none type: standard act: 1 avo: 1 av: Length 89 mm Blade thickness 0,8 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 4 mm Drive profile size (bit) 4 mm n: WERA 800/4 Z slotted screw bit, 0.8 x 4 x 89 mm - 05059480001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 0.8 x 4 x 89 mm kts: slotted screw bit, 0.8 x 4 x 89 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059480001 sr_ns: WERA05059480001
r: 02953281 p: 38.512 pid: 31131 b: WERA q: 1 st: 1 lt: 1 ean: 4013288204400 sr: WERA 05003995001 sr_no_br: 05003995001 sr_no_br_cl: 05003995001 sr_cl: WERA05003995001 sr_dash: sold: 269.584 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 1/2" Min. socket size 10 mm; 19 mm Quantity per set 7 Product Range Wera Zyklop n: WERA Belt C 1 Zyklop socket set with holding function and 1/2" drive 7-piece - 05003995001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Typically Wera designed robust textile belt with 6 sockets taking up minimal space. A smooth Twist to Unlock mechanism ensures a secure fit and simple removal of the sockets. Comes with Take it easy Tool Finder with colour coding according to size to enable the right tool to be selected easily and quickly. Includes a snap hook for secure fastening to a belt loop or pocket. Sockets with holding function for particularly convenient screwdriving with reduced risk of losing the screw when approaching the workpiece. Supplied with a non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. 7-piece socket set on a robust textile belt, 1/2" Sockets with holding function for screws/bolts/nuts Smooth rotary mechanism for a secure hold and easy access of the tools With Take it easy tool finder: colour coding by size Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System 7-piece set; robust textile socket belt, including snap hook to enable secure fastening to a belt loop or pocket. Non-woven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Fast and easy Twist to Unlock mechanism for secure storage and simple removal of the sockets.6 Zyklop sockets with 1/2" drive with fastener holding function. Take it easy tool finder: Colour coding to enable the desired socket to be easily selected. 1 tool for the simple removal of nuts from sockets with holding function. Features and benefits The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. Whoever would have thought that the storage of sockets could be completely revolutionised and that someone could come up with a stylish belt with securely attached sockets that can still be easily removed. The clamping of the screw is achieved by a twin spring loaded ball retention system. The tubing is effectively protected against mechanical wear and tear by a steel ring. The holding function is especially helpful in confined, hard-to-reach spaces, where there is no room for a second hand to secure the screw. This tool enables hexagon nuts to be easily removed from sockets with holding function. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The all new smooth turning mechanism guarantees both secure and rattle-free storage, yet allows easy removal of the tool. The textile belt can be attached by means of the nonwoven reverse side and the hook and loop strips e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system. The robust textile belt can be secured to a belt loop or pocket by means of the snap hook. ds: dsc: Scope of delivery Belt C 1 Zyklop socket set with holding function, 1/2" drive, 7 pieces 6x 8790 HMC HF Zyklop socket with 1/2" drive with holding function: 10x37 mm, 13x37 mm, 15x37 mm, 16x37 mm, 17x37 mm, 19x37 mm 1x Nut Extractor: 43 x 14 mm 1x Belt C (textile belt), 6 location, unloaded: 45 x 275 mm 1x Hook and Loop Fastener Strips 30: 30 x 200 mm kts: socket set with holding function and 1/2" drive 7-piece kpn: Belt C 1 Zyklop kpn_dash: kpn_clear: BeltC1Zyklop bkpn: WERA Belt C 1 Zyklop bkpn_clear: WERA BeltC1Zyklop c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003995001 sr_ns: WERA05003995001
r: 02830466 p: 29.917 pid: 44590 b: WERA q: 0 st: lt: 16 ean: 4013288027887 sr: WERA 05006145001 sr_no_br: 05006145001 sr_no_br_cl: 05006145001 sr_cl: WERA05006145001 sr_dash: sold: 269.253 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 6 Product Range Wera Kraftform n: WERA 160 i/6 Rack screwdriver set Kraftform Plus Series 100 in holder 6-piece - 05006145001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description 6-piece screwdriver set with individually tested, insulated screwdrivers as per IEC 60900. Individual testing in a water bath at 10,000 volts so as to ensure safe working at the permitted voltage of 1,000 volts. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally bites itself into the screw head and prevents any slipping. Take it easy Tool Finder: colour coding according to profile and size. The anti-roll feature prevents any bothersome rolling away at the workplace. Including a rack for storage. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Kraftform: The safety screwdriver. Lasertip blade + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application For slotted and Phillips screws Content 6-pieces set and rack in display carton Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Our screwdrivers are tested for dielectric strength under a 10,000 volt load to make sure that their most important property, their insulation, has been exhaustively tested. Each individual Wera VDE screwdriver is subjected to this test to guarantee safe working up to 1,000 volts. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 i/6 Rack Screwdriver set Kraftform Plus Series 100 + Rack, 6 pieces 2x 162 i PH VDE Insulated screwdriver for Phillips screws: PH 1x80 mm, PH 2x100 mm 4x 160 i VDE Insulated screwdriver for slotted screws: 0.4x2.5x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set Kraftform Plus Series 100 in holder 6-piece kpn: 160 i/6 Rack kpn_dash: kpn_clear: 160i6Rack bkpn: WERA 160 i/6 Rack bkpn_clear: WERA 160i6Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05006145001 sr_ns: WERA05006145001
r: 02823471 p: 2.07 pid: 46885 b: WERA q: 0 st: lt: 9 ean: 4013288107206 sr: WERA 05066082001 sr_no_br: 05066082001 sr_no_br_cl: 05066082001 sr_cl: WERA05066082001 sr_dash: sold: 269.1 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 20 Blade thickness Type of drive profile (bit) Torx Connection size (bit) 1/4" VDE approved No Bit tip T20 n: WERA 867/1 ZA TORX bit with pin, TX 20 x 25 mm - 05066082001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for SPAX T-STAR plus screws. Come with a pin which, together with the bore hole within the screw, makes it easier to centre the tool. Tough viscous for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. For TORX® socket screws with safety pin TORX® bit with central pin Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application SPAX® T-STAR plus® screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Central pin, tough, for universal use Features and benefits The protruding pin that fits into the borehole of the screw makes it easier to centre the tool in the screw recess. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 867/1 ZA TORX® bits with central pin, TX 20 x 25 mm kts: bit with pin, TX 20 x 25 mm kpn: 867/1 ZA TORX kpn_dash: kpn_clear: 8671ZATORX bkpn: WERA 867/1 ZA TORX bkpn_clear: WERA 8671ZATORX c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05066082001 sr_ns: WERA05066082001
r: 02822805 p: 0.94 pid: 45512 b: WERA q: 0 st: lt: 11 ean: 4013288014665 sr: WERA 05072082001 sr_no_br: 05072082001 sr_no_br_cl: 05072082001 sr_cl: WERA05072082001 sr_dash: sold: 268.84 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/1 Z PZ bit Pozidriv, PZ 2 x 25 mm - 05072082001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Pozidriv screws. Tough, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3. Suitable for Pozidriv screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 855/1 Z bits, PZ 2 x 25 mm kts: bit Pozidriv, PZ 2 x 25 mm kpn: 855/1 Z PZ kpn_dash: kpn_clear: 8551ZPZ bkpn: WERA 855/1 Z PZ bkpn_clear: WERA 8551ZPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05072082001 sr_ns: WERA05072082001
r: 03176904 p: 19.173 pid: 32950 b: WERA q: 0 st: lt: 11 ean: 4013288218841 sr: WERA 05020502001 sr_no_br: 05020502001 sr_no_br_cl: 05020502001 sr_cl: WERA05020502001 sr_dash: sold: 268.422 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 22 mm Length 260 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker ring spanner (22 x 260 mm) - 05020502001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open end side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, 22 x 260 mm kts: ring spanner (22 x 260 mm) kpn: 6003 Joker kpn_dash: kpn_clear: 6003Joker bkpn: WERA 6003 Joker bkpn_clear: WERA 6003Joker c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020502001 sr_ns: WERA05020502001
r: 02264435 p: 8.925 pid: 44209 b: WERA q: 0 st: lt: 14 ean: 4013288160126 sr: WERA 05006442001 sr_no_br: 05006442001 sr_no_br_cl: 05006442001 sr_cl: WERA05006442001 sr_dash: sold: 267.75 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 125 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted n: WERA 160 iS VDE insulated cutting screwdriver, reduced-diameter blade, 1 x 5.5 x 125 mm - 05006442001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Reduced blade diameter with integrated protective insulation, low-lying screw and spring elements can be easily reached and operated. Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool . Anti-roll protection avoids bits from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Reduced shaft diameter Application Slotted screws and actuating tool for spring terminals Blade Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900 Design Conical blade, zinc-phosphated Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Reduced blade diameter with integrated protective insulation, allows sunken screws and spring elements to be accessed and actuated, individually tested as per IEC 60900. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 160 iS VDE Insulated screwdriver with reduced blade diameter for slotted screws, 1 x 5.5 x 125 mm kts: VDE insulated cutting screwdriver, reduced-diameter blade, 1 x 5.5 x 125 mm kpn: 160 iS kpn_dash: kpn_clear: 160iS bkpn: WERA 160 iS bkpn_clear: WERA 160iS c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006442001 sr_ns: WERA05006442001
r: 87990349 p: 44.462 pid: 21026 b: WERA q: 0 st: lt: 8 ean: 4013288100689 sr: WERA 05057122001 sr_no_br: 05057122001 sr_no_br_cl: 05057122001 sr_cl: WERA05057122001 sr_dash: sold: 266.772 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (bit) Mixed Connection size (bit) 1/4" ESD No VDE approved No Quantity per set 61 n: WERA Bit-Safe 61 Universal 1 screwdriver bit set 61-piece - 05057122001 cn: BIT SET cn2: BIT SET cn_clear: BITSET d: Product description Comprehensive 61-piece bit set by Wera in a robust Bit-Safe. Provides a quick overview of the tools available and bits not needed are simply reinserted into the set and do not get lost. 1 universal holder with Rapidaptor technology: allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. The strong permanent magnet holds the bits absolutely securely. Can be inserted in the power screwdriver or for use in the chuck of the electric drill. The Bit-Safes in textile box convince due to their functionality in a minimum of space Universal holder with strong permanent magnet and quick-release chuck Torsion design against premature wear 61-piece 1 bit holder Rapidaptor with strong permanent magnet and quick-release chuck, 60 bits, Torsion-style (T) design to reduce premature wear, tough (Z), for universal use. Features and benefits The new Bit-Safes provide users with comprehensive bit and holder ranges in a surface-protecting, compact textile box. TZ-Bits are tough viscous bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. Lightning-fast bit change without any extra tools. One-handed operation. With fast-rotating sleeve for easy wielding of the screwdriver. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. Every function of the Rapidator quick-release chuck, such as inserting or releasing bits, can be carried out with one hand. This is faster, more economical and more ergonomic. There are no unnecessary manoeuvres. ds: dsc: Scope of delivery Bit-Safe 61 Universal 1, 61 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4" x 50 mm 15x 851/1 TZ bits: 3x PH 1x25 mm, 10x PH 2x25 mm, 2x PH 3x25 mm 15x 855/1 TZ bits: 3x PZ 1x25 mm, 10x PZ 2x25 mm, 2x PZ 3x25 mm 16x 867/1 TZ TORX® bits: 2x TX 10x25 mm, 3x TX 15x25 mm, 3x TX 20x25 mm, 3x TX 25x25 mm, 3x TX 30x25 mm, 2x TX 40x25 mm 3x 800/1 TZ bits: 0.6x4.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mm 11x 840/1 Z bits: 3x 2.5x25 mm, 3x 3x25 mm, 3x 4x25 mm, 2x 5x25 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: screwdriver bit set 61-piece kpn: Bit-Safe 61 Universal 1 kpn_dash: Bit kpn_clear: BitSafe61Universal1 bkpn: WERA Bit-Safe 61 Universal 1 bkpn_clear: WERA BitSafe61Universal1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit set sr_no_br_cl_ns: 05057122001 sr_ns: WERA05057122001
r: 08103833 p: 88.76 pid: 72289 b: WERA q: 0 st: lt: 8 ean: 4013288229847 sr: WERA 05020015001 sr_no_br: 05020015001 sr_no_br_cl: 05020015001 sr_cl: WERA05020015001 sr_dash: sold: 266.28 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Smallest size 8 mm Largest size 19 mm Supplied in On rack Quantity per set 6 Product Range Wera Joker n: WERA 9631 magneetstrip 6000 Joker 2 socket-ring spanner set 6-piece - 05020015001 cn: RATCHETING COMBINATION SPANNER SET cn2: RATCHETING COMBINATION SPANNER SET cn_clear: RATCHETINGCOMBINATIONSPANNERSET d: Product description Ring ratchet spanner set, 5-piece set, metric sizes; on a magnetic rail. The Joker 6000 ring ratchet spanner with holding function for hexagon screw heads and bolts. With its extra hard teeth, the exchangeable metal plate in the open end secures screws and sockets. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the open end avoids time-consuming rotating of the wrench whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy Tool finder: Colour coding by size. The clips hold the tools perfectly. With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. 5-piece set With its strong magnet, the rail holds securely to metal surfaces. It can also be bolted to the wall. The clips hold the tools perfectly Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Set of ratcheting combination wrenches, metric sizes5-piece setOn a magnetic rail Features and benefits The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined working spaces. The high-quality aluminium magnetic rail offers space for up to 11 spanners. The clamping springs hold the tools securely. With its strong magnet, the rail can be attached securely to metal surfaces. The rail can also be bolted to the wall. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. ds: dsc: Scope of delivery 9631 Magnetic rail 6000 Joker 2 Ratcheting combination wrenches set, 5 pieces 5x 6000 Joker Ratcheting combination wrenches: 8x144 mm, 10x159 mm, 13x177 mm, 17x224 mm, 19x246 mm 1x 9610 Joker Magnetic rail, for up to 11 spanners, empty: 30 x 370 mm kts: socket-ring spanner set 6-piece kpn: 9631 magneetstrip 6000 Joker 2 kpn_dash: kpn_clear: 9631magneetstrip6000Joker2 bkpn: WERA 9631 magneetstrip 6000 Joker 2 bkpn_clear: WERA 9631magneetstrip6000Joker2 c_path: Home / Tools / Hand tools / Keys / Sets / Ratcheting combination spanner set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera ratcheting combination spanner set | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020015001 sr_ns: WERA05020015001
