r: 02835959 p: 49.09 pid: 42057 b: WERA q: 0 st: lt: 11 ean: 4013288179203 sr: WERA 05074792001 sr_no_br: 05074792001 sr_no_br_cl: 05074792001 sr_cl: WERA05074792001 sr_dash: sold: 245.45 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Min. tightening torque 0,3 Nm Bit holder size 1/4 inch Bit holder type Internal hexagon ESD No VDE approved No With safety colour code 1000V No Adjustable torque range 0,3-1 Nm Max. tightening torque 1 Nm Product Range Wera Kraftform n: WERA 7451 Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm - 05074792001 cn: TORQUE SCREWDRIVER cn2: TORQUE SCREWDRIVER cn_clear: TORQUESCREWDRIVER d: Product description Wera torque screwdriver. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited loosening torque for slackening stuck screws. Rapidaptor quick-release technology for rapid bit changes. Suitable for bits with a 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Multi-component Kraftform handle with hard and soft zones for high working speeds, whilst being easy on the hand. Please note: 1 Ncm = 0.01 Nm. Factory pre-set torque screwdriver with Rapidaptor quick-release chuck Only adjustable with an extra tool Suitable for bits with 1/4" hex head drive Rapidaptor technology for rapid bit change Distinct signal when pre-set value is reached Application Suitable for 1/4" DIN ISO 1173-C 6.3 and E 6.3 hexagon insert bits and Wera Series 1 and 4 Design Rapidaptor rapid-in, rapid-out, rapid-spin, chuck-all and single-hand technology Pre-set torque 0.1 Nm, 0.3 Nm, 0.9 Nm Accuracy ± 6% (DIN EN ISO 6789). Reliable slipping mechanism and acoustic signal when reaching the set torque. Handle Kraftform with non-roll feature, multi-component Features and benefits Wera torque screwdrivers. With a factory pre-set torque value set to the smallest scale value. For all applications, where the same constant torque and repeat accuracy are required. The torque can be changed with an extra tool within the measuring range (re-calibration kit can be ordered with the code number 05137003001). Afterwards you can check the set value using an off-the-shelf torque tester. Unlimited torque for loosening seized screws. Rapidaptor technology makes the tool adaptable since bits and sockets can be exchanged rapidly. The Rapidaptor quick-release chucks hold 1/4" DIN ISO 1173-C 6,3 and E 6,3 as well as Wera series 1 and 4 bits. The bit can be pushed into the adaptor without moving the sleeve. The lock is activated automatically as soon as the bit is applied to the screw. Bits are held securely and wobble-free. Simply push the sleeve forward to change the bit. The spring mechanism lifts the bit off the magnet and unlocks the tool. The bit can be easily removed. The rapid-out function makes it easy to remove even the smallest bits without extra tools. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. ds: dsc: Scope of delivery 7400 series Kraftform Torque screwdrivers, with factory pre-set value (0.1-1.5 Nm) and Rapidaptor quick-release chuck, handle size 89 mm, 7451 x 0.3 Nm x 0.3-1.0 Nm kts: Kraftform torque screwdriver standard setting, handle + Rapidaptor quick change holder 0.3 Nm x 0.3-1.0 Nm kpn: 7451 kpn_dash: kpn_clear: 7451 bkpn: WERA 7451 bkpn_clear: WERA 7451 c_path: Home / Tools / Hand tools / Torque tools / Torque screwdrivers / Torque screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera torque screwdrivers / Wera torque screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05074792001 sr_ns: WERA05074792001
r: 87010121 p: 4.09 pid: 70898 b: WERA q: 32 st: 1 lt: 1 ean: 4013288015075 sr: WERA 05060060001 sr_no_br: 05060060001 sr_no_br_cl: 05060060001 sr_cl: WERA05060060001 sr_dash: sold: 245.4 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 n: WERA 855/4 TH PZ bit Pozidriv, PZ 2 x 50 mm - 05060060001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits with Torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Suitable for Pozidriv screws Torsion design against premature wear Particularly hard for semi-hard materials 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Torsion-style design to reduce premature wear, extra-hard Features and benefits TH-Bits are hard bits with a torsion zone. Torsion bits absorb the damaging peak torque loads in the torsion zone. This prevents premature wear and enhances the service life of the bits. ds: dsc: Scope of delivery 855/4 TH bits, PZ 2 x 50 mm kts: bit Pozidriv, PZ 2 x 50 mm kpn: 855/4 TH PZ kpn_dash: kpn_clear: 8554THPZ bkpn: WERA 855/4 TH PZ bkpn_clear: WERA 8554THPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05060060001 sr_ns: WERA05060060001
r: 02823075 p: 8.146 pid: 45541 b: WERA q: 0 st: lt: 16 ean: 4013288157706 sr: WERA 05057662001 sr_no_br: 05057662001 sr_no_br_cl: 05057662001 sr_cl: WERA05057662001 sr_dash: sold: 244.38 p_range: none type: standard act: 1 avo: 1 av: Length 50 mm Drive profile size (bit) 3 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ3 n: WERA 855/4 IMP DC PZ DIY bits, PZ 3 x 50 mm - 05057662001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Pozidriv* screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Suitable for Pozidriv screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 4) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. ds: dsc: Scope of delivery 1x 855/4 IMP DC Impaktor Bits Pozidriv: PZ 3 x 50 mm kts: bits, PZ 3 x 50 mm kpn: 855/4 IMP DC PZ DIY kpn_dash: kpn_clear: 8554IMPDCPZDIY bkpn: WERA 855/4 IMP DC PZ DIY bkpn_clear: WERA 8554IMPDCPZDIY c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057662001 sr_ns: WERA05057662001
r: 01050121 p: 81.322 pid: 42758 b: WERA q: 0 st: lt: 11 ean: 4013288144607 sr: WERA 05003692001 sr_no_br: 05003692001 sr_no_br_cl: 05003692001 sr_cl: WERA05003692001 sr_dash: sold: 243.966 p_range: KLIUM_PRODUCT_RANGE_308 type: standard act: 1 avo: 1 av: Length 341 mm Drive profile size 1/2" Non-sparking No VDE approved No With safety colour code 1000V No Product Range Wera Koloss n: WERA 8002 C Koloss 1/2" Zyklop ratchet with 1/2" drive 3-piece - 05003692001 cn: RATCHET cn2: RATCHET cn_clear: RATCHET d: Product description The ratchet that can also be safely and officially used as a hammer. The KOLOSS is a reversible, heavy-duty ratchet that can be used with a load of at least 600 Newton metres. The dual ratchet teeth and the minimum return angle of only 6° ensure rapid and precise screwdriving even in confined situations. And the best thing: absolutely no impact on the hammer faces, however hard, can destroy the ratchet mechanism. Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads; take-up for KOLOSS extension 8780 C and KOLOSS centring pin 8781 C at end of handle. Comes in a set with practical holster for e.g. belt attachment or to a machine with the aid of the snap hook as well as a pad to protect materials and the surface of the workpiece. For loads of at least 600 Newton metres Push-through square drive for right/left switchover Including hammer function Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads Comes in a set with practical holster for e.g. belt attachment Application Ratchet function for 1/2" square sockets and 1/2" adaptors with square drive, equipped with ball lock, hammer function e.g. to align work pieces Design Push-through square drive for forward and reverse operation, fine-tooth ratchet mechanism, small return angle of 6°, can transfer at least 600 Nm of torque, tubular shaft to minimise impact vibrations, drop-forged hammer head, positively pinned, ground striking face Handle Multi-component Kraftform handle for optimum pressure, impact and tensile loads, handle end designed for connection of Koloss extension 8780 C and Koloss centering pin 8781 C Features and benefits The heavy-duty ratchet that can also be safely used as a hammer. Typical fields of application are mechani-cal engineering, boatbuilding, mining, aircraft construction, bridge building, commercial vehicle construction and maintenance, railway and road construction and maintenance, industrial plant and equipment construction, high-bay warehouse construction, petroleum industry and many more. Non-removable sealed and hardened square drive for tough jobs. Changing the ratchet direction using a hardened push-through square drive ensures great resilience, since there is no susceptible switching mechanism that could be damaged by hammer blows. This is far more robust than a right/left switch. Tubular shaft minimises impact vibrations. Used with rubber pad attachments to protect materials and surfaces. The drop-forged hammer head is permanently pinned to the shaft in a form-fit joint. This guarantees an almost non-detachable positioning of the hammer head on the handle. Gives the robust 30 saw teeth the precision engineering effect of 60 fine teeth with a 6° return angle. ds: dsc: Scope of delivery 8002 C Koloss 1/2" with 1/2" drive, 3 pieces 1x 8002 C Koloss 1/2": 1/2" x 341 mm 1x 8782 C Koloss pad: 50 mm 1x Holster: 175 x 75 mm kts: Zyklop ratchet with 1/2" drive 3-piece kpn: 8002 C Koloss 1/2" kpn_dash: kpn_clear: 8002CKoloss12 bkpn: WERA 8002 C Koloss 1/2" bkpn_clear: WERA 8002CKoloss12 c_path: Home / Tools / Hand tools / Sockets and ratchets / Ratchets / Ratchet | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera ratchets / Wera ratchet | Home / Our brands / Wera / Wera Ranges / Wera koloss sr_no_br_cl_ns: 05003692001 sr_ns: WERA05003692001
r: 03229195 p: 27.107 pid: 70486 b: WERA q: 0 st: lt: 7 ean: 4013288187901 sr: WERA 05057763001 sr_no_br: 05057763001 sr_no_br_cl: 05057763001 sr_cl: WERA05057763001 sr_dash: sold: 243.963 p_range: none type: standard act: 1 avo: 1 av: Length 25 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Pozidriv Connection size (bit) 1/4" VDE approved No Bit tip PZ2 Number per box 15 n: WERA Bit-Box 15 Impaktor PZ Bit-Box 15 Impaktor PZ, PZ 2 x 25 mm (15 pcs) - 05057763001 cn: BIT cn2: BIT cn_clear: BIT d: Product description High quality bits for Phillips screws in a practical Bit-Box. The Impaktor technology ensures above-average service life even under very demanding circumstances. The enhanced friction resistance from the rough diamond-particle coating on the tip of the bit prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers; 1/4" hex, appropriate for holders as per DIN ISO 1173-D 6.3. Come with Take it easy tool finder: colour coding according to profile and size stamp. Suitable for Pozidriv screws Impaktor technology for above-average service life Particularly suitable for use with customary impact drivers Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out 1/4" hexagon drive (Wera connecting series 1) Application Suitable for Pozidriv screws Drive 1/4" hexagon, suitable for DIN ISO 1173-D 6.3 bit holders Design The Impaktor technology ensures an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Take it easy tool finder: Output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located. Features and benefits Impaktor technology for an above-average service life even under extreme demands The slide switch allows a simple and gradual removal and reinsertion of the bits. The transparent reverse side means that it is easy to know how many bits are still in the box. For an above-average service life. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Another product advantage is the coating of the Impaktor bits with minute diamond particles. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. For use with impact screwdrivers. Improve productivity when screwdriving with power tools. Maximum utilisation of the material properties, a very special geometry - designed particularly to meet the extreme demands - as well a specific manufacturing process mean that Wera Impaktor tools have an above-average service life. Particularly high strength. Reduce the danger of premature bit breakage. Torsion zone specially designed to absorb such forces and thereby protect the bit tip. These diamond particles reduce the cam-out effects - particularly high in power tool applications - which can lead to a slipping out of the screw head. The diamond particles literally bite themselves into the screw recess. This means that less contact pressure is required, something that greatly delays fatigue setting-in in power tool screwdriving jobs. ds: dsc: Scope of delivery Bit-Box 15 Impaktor PZ, PZ 2 x 25 mm, 15 pieces 15x 855/1 IMP DC Impaktor bits: PZ 2 x 25 mm kts: Bit-Box 15 Impaktor PZ, PZ 2 x 25 mm (15 pcs) kpn: Bit-Box 15 Impaktor PZ kpn_dash: Bit kpn_clear: BitBox15ImpaktorPZ bkpn: WERA Bit-Box 15 Impaktor PZ bkpn_clear: WERA BitBox15ImpaktorPZ c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05057763001 sr_ns: WERA05057763001
r: 02832138 p: 10.12 pid: 43264 b: WERA q: 0 st: lt: 14 ean: 4013288101099 sr: WERA 05060422001 sr_no_br: 05060422001 sr_no_br_cl: 05060422001 sr_cl: WERA05060422001 sr_dash: sold: 242.88 p_range: none type: standard act: 1 avo: 1 av: Shank size 1/4 inch Socket size 7 mm Type of drive profile (socket) Hexagonal Shank type External hexagon Length 65 mm n: WERA 869/4 M cap bit magnetic 7 x 50 mm - 05060422001 cn: NUT SETTER cn2: NUT SETTER cn_clear: NUTSETTER d: Product description Metric nutsetter for hexagon head screws. Comes with a strong permanent magnet. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Nutsetter for hexagon head screws Metric Strong permanent magnet 1/4" hexagon drive Application Hexagon headed bolts, screws and nuts Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Strong permanent magnet Features and benefits Nutsetters, magnetic, for easier application of the screw. ds: dsc: Scope of delivery 869/4 M Nutsetters, magnetic, 7 x 50 mm kts: cap bit magnetic 7 x 50 mm kpn: 869/4 M kpn_dash: kpn_clear: 8694M bkpn: WERA 869/4 M bkpn_clear: WERA 8694M c_path: Home / Tools / Hand tools / Sockets and ratchets / Sockets / Nut setter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sockets / Wera nut setter sr_no_br_cl_ns: 05060422001 sr_ns: WERA05060422001
r: 41071334 p: 11.56 pid: 71927 b: WERA q: 0 st: lt: 8 ean: 4013288121066 sr: WERA 05003525001 sr_no_br: 05003525001 sr_no_br_cl: 05003525001 sr_cl: WERA05003525001 sr_dash: sold: 242.76 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 1 1/4" Connection size 2 1/4" Connection type 1 (extension) Outer square Connection type 2 (extension) Internal square Length 75 mm VDE approved No With safety colour code 1000V No Non-sparking No Product Range Wera Zyklop n: WERA 8794 SA Zyklop extension with freewheel sleeve, short, 1/4", 1/4" x 75 mm - 05003525001 cn: EXTENSION cn2: EXTENSION cn_clear: EXTENSION d: Product description Wera Zyklop extension with slip-proof fast-rotating sleeve for lightning-fast tightening and loosening of screws and bolts. Made of matte-chromed chrome-vanadium. 1/4" Zyklop extension with free-turning sleeve, short For 1/4" square sockets with ball lock With easy-to-grip free-turning sleeve for rapid tightening and loosening of screws and nuts Equipped with ball stop groove Chrome vanadium steel, matte chrome-plated Application 1/4" square drive sockets with ball lock Design Easy-to-grip free-turning sleeve for rapid tightening or loosening of screws and nuts, chrome vanadium, brushed chrome-plated finish Features and benefits The free-turning sleeve on the Zyklop Speed and the Zyklop extension effectively accelerates the turning of screws and nuts. ds: dsc: Scope of delivery 8794 SA Zyklop extension with free-turning sleeve, short, 1/4", 1/4" x 75 mm kts: Zyklop extension with freewheel sleeve, short, 1/4", 1/4" x 75 mm kpn: 8794 SA kpn_dash: kpn_clear: 8794SA bkpn: WERA 8794 SA bkpn_clear: WERA 8794SA c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Extension | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera extension | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003525001 sr_ns: WERA05003525001
r: 03230292 p: 59.834 pid: 71908 b: WERA q: 0 st: lt: 11 ean: 4013288223272 sr: WERA 05005470001 sr_no_br: 05005470001 sr_no_br_cl: 05005470001 sr_cl: WERA05005470001 sr_dash: sold: 239.336 p_range: none type: standard act: 1 avo: 1 av: Type of drive profile (socket) Hexagonal Connection size 1/2" Min. socket size 10 mm; 19 mm Quantity per set 6 n: WERA C Deep 1 socket set 1/2" on magnetic strip 6-piece - 05005470001 cn: HAND SOCKET SET cn2: HAND SOCKET SET cn_clear: HANDSOCKETSET d: Product description Socket rail with 6 long manual and machine sockets (non-impact), 1/2". A smooth rotary mechanism allows a secure hold and easy access of the sockets. Long 1/2" manual and machine sockets (ISO 2725 part 3) by Wera for manual and (non-impact) machine use even at low lying couplings and protruding thread rods. With Take it easy tool finder with colour coding by size - to help you find the required tool quickly and easily. Slip-proof for easy grip even with oily hands. With hexagon profile and ball stop groove. The hexagon profile enables the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-teethed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. For external hexagon bolts and screws. The rail allows temporary attachment to metallic surfaces and, with its twist-to-unlock function, ensures secure locking and unlocking of the sockets. 6-piece socket set on socket rail, 1/2" Magnetic rail with secure socket mounting and yet easy removal (twist-to-unlock) for temporary attachment on wall, shelf or workshop trolley Smooth rotary mechanism for a secure hold and easy access of the tools Long 1/2" socket wrenches for low-lying couplings in confined spaces und protruding thread rods Hexagon profile allows precise and profile-friendly screwdriving with high power transmission 6-piece set; on rail for temporary attachment on walls, shelves, workshop trolleys. Smooth rotary mechanism for safe storage and easy access of the tool.6 sockets with 1/2" drive. Long design for low lying couplings and protruding thread rods; with hexagon profile. Take it easy tool finder: With colour coding by size - to help you find the required tool quickly and easily. Features and benefits Wera Belts The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. Thanks to the long design of the sockets, even couplings in tight spaces can be reached. Screwdriving at protruding thread rods can also be possible. The hexagon profile offers the transmission of high forces and loads the edges of the bolt or the screw head less than a double hexagon profile. Fine-toothed ratchets also make use of a double hexagon profile superfluous, even in confined spaces, thanks to their small return angle. Knurling on lower end for more grip when used manually. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). With its twist-to-unlock mechanism, the socket rail ensures easy access of the sockets. At the same time the sockets are held securely. Thanks to the magnet, the rail is suitable for temporary attachment to the wall, shelf or workshop trolley. ds: dsc: Scope of delivery Magnetic socket rail C Deep 1 socket set, 1/2" drive, 6 pieces 6x 8790 HMC Deep socket with 1/2" drive: 10x83 mm, 13x83 mm, 15x83 mm, 16x83 mm, 17x83 mm, 19x83 mm 1x 9602 Magnetic socket rail, 1/2", empty: 30 x 370 mm kts: socket set 1/2" on magnetic strip 6-piece kpn: C Deep 1 kpn_dash: kpn_clear: CDeep1 bkpn: WERA C Deep 1 bkpn_clear: WERA CDeep1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Hand socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera hand socket set sr_no_br_cl_ns: 05005470001 sr_ns: WERA05005470001
r: 87010014 p: 9.19 pid: 72817 b: WERA q: 87 st: 1 lt: 1 ean: 4013288013828 sr: WERA 05059780001 sr_no_br: 05059780001 sr_no_br_cl: 05059780001 sr_cl: WERA05059780001 sr_dash: sold: 238.94 p_range: none type: standard act: 1 avo: 1 av: Length 110 mm Drive profile size (bit) 2 Blade thickness Type of drive profile (bit) Phillips Connection size (bit) 1/4" VDE approved No Bit tip PH2 n: WERA 851/4 Z PH bit Phillips, PH 2 x 110 mm - 05059780001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For Phillips screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Phillips screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 851/4 Z bits, PH 2 x 110 mm kts: bit Phillips, PH 2 x 110 mm kpn: 851/4 Z PH kpn_dash: kpn_clear: 8514ZPH bkpn: WERA 851/4 Z PH bkpn_clear: WERA 8514ZPH c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059780001 sr_ns: WERA05059780001
r: 03227963 p: 47.768 pid: 71536 b: WERA q: 0 st: lt: 12 ean: 4013288195074 sr: WERA 05003185001 sr_no_br: 05003185001 sr_no_br_cl: 05003185001 sr_cl: WERA05003185001 sr_dash: sold: 238.84 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Connection size 3/8" Type of drive profile Torx Quantity per set 6 Product Range Wera Zyklop n: WERA 8767 B HF 1 Zyklop bit socket set Torx with holding function 3/8" drive 6-piece - 05003185001 cn: BIT SOCKET SET cn2: BIT SOCKET SET cn_clear: BITSOCKETSET d: Product description Bit socket with 3/8" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece. With Take it easy tool finder with colour coding by size - for quick and easy identification of the required tool . Bit sockets with holding function for TORX® screws The holding function holds screws securely on the tool With Take it easy tool finder: colour coding by size Knurling on lower socket end for more grip when used manually Chrome vanadium steel, matte chrome-plated 6-piece setPouch with 100 mm/107 mm bit sockets6 Zyklop bit sockets for TORX® screws, with 3/8" drive, with holding function. Take it easy tool finder: Colour coding to enable the desired bit socket to be easily selected. Features and benefits The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that TORX® screws made according to Acument Intellectual Properties specifications are securely held on the tool! Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). The manual and machine sockets can be used both for hand and power tools use (non-impact). Users need just one socket set for all applications. ds: dsc: Scope of delivery 8767 B TORX® HF 1 Zyklop bit socket set with holding function, 3/8" drive, 6 pieces 6x 8767 B HF TORX® Zyklop bit socket with holding function, 3/8" drive: TX 25x107 mm, TX 27x107 mm, TX 30x107 mm, TX 40x107 mm, TX 45x100 mm, TX 50x100 mm 1x Hook and Loop Fastener Strip 120: 120 x 50 mm kts: Zyklop bit socket set Torx with holding function 3/8" drive 6-piece kpn: 8767 B HF 1 kpn_dash: kpn_clear: 8767BHF1 bkpn: WERA 8767 B HF 1 bkpn_clear: WERA 8767BHF1 c_path: Home / Tools / Hand tools / Sockets and ratchets / Sets / Bit socket set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera sets / Wera bit socket set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05003185001 sr_ns: WERA05003185001
r: 08085458 p: 238.677 pid: 70929 b: WERA q: 0 st: lt: 8 ean: 4013288223074 sr: WERA 05075831001 sr_no_br: 05075831001 sr_no_br_cl: 05075831001 sr_cl: WERA05075831001 sr_dash: sold: 238.677 p_range: none type: standard act: 1 avo: 1 av: Min. tightening torque 2 Nm Max. tightening torque 12 Nm Drive profile size 1/4" Adjustable torque range 2-12 Nm n: WERA Safe-Torque A 1 Imperial Set 1 torque wrench set 1/4" square 2-12 Nm in fabric case 10-piece - 05075831001 cn: TORQUE WRENCH SET cn2: TORQUE WRENCH SET cn_clear: TORQUEWRENCHSET d: Product description 10-piece 1/4" torque wrench set in a robust textile box; torque wrench with slide-over mechanism. Once the set torque has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. Setting range of 2 to 12 Nm for controlled clockwise and counterclockwise torque operation. Easy setting and saving of the default value: The audible and tactile clicks on reaching the scale values facilitate the safe setting of the desired torque value. The Torque Lock function allows use as a standard ratchet without torque function. Thus also usable for applications with angles of rotation. Max. breaking torque of the 1/4" square head as per DIN 3122. The return angle of only 5° allows the ratchet to be used even in confined spaces. Included are: Safe-Torque A 1 torque wrench, 1/4" square head, 2-12 Nm, 8 sockets with 1/4" drive and one short extension. Slip-over release mechanism - the set torque can never be overtightened Torque Lock function: The torque function can be deactivated and the tool can then be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation For controlled clockwise and counterclockwise torque operation - tightening and loosening with or without torque Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values After the target torque has been reached, the release angle is only 30° 10-piece set; in a surface-friendly, compact and extremely robust textile box. Small size and low weight for better mobility.1 Safe-Torque A 1 torque wrench with 1/4" square head drive, measuring range 2-12 Nm; for controlled clockwise and counterclockwise torque operation; tightening and loosening with or without torque, disengageable torque function (Torque Lock function); 72 teeth; low return angle of 5°; easy setting and saving of the desired torque value, with audible and tactile locking when the scale values are reached, slip-over release mechanism when the set torque is reached; ergonomic 2-component handle; 8 Zyklop sockets, one Zyklop extension with fast-rotating sleeve, short Features and benefits Safe-Torque The Safe-Torque A 1 torque wrench is equipped with a slide-over mechanism. Once the set torque value has been reached, the tool cannot be overtightened, so that excessive torque cannot be applied. The torque function can be deactivated. The Safe-Torque torque wrench can then also be used as a standard ratchet with high loosening moments and for applications with defined angles of rotation. The Safe-Torque torque wrench is suitable for clockwise and counterclockwise operation with a set torque. When the Torque Lock function is deactivated, tightening and loosening is enabled without torque. Easy setting and saving of the required torque with audible and tactile clicks on reaching the scale values. The fine-toothed Safe-Torque torque wrench with 72 teeth has a back-pivoting angle of only 5°. The small stroke offers quick and precise working in all installation positions. The Safe-Torque A 1 torque wrench has 1/4" square head mounting and is suitable for 1/4" sockets. The Wera Belts can be attached to the hook and loop fastener strips in the textile box of the sets Safe-Torque A 1 Set 1 and Safe-Torque A 1 Imperial Set 1, so more sockets and/or bit sockets can be stored and transported. ds: dsc: Scope of delivery Safe-Torque A 1 Imperial Set 1, 1/4" square head drive, 2-12 Nm, 10 pieces 1x Safe-Torque A 1 torque wrench with 1/4" square head drive, 2-12 Nm: 1/4" x 2-12 Nm 8x 8790 HMA Zyklop 1/4" socket: 3/16"x23 mm, 7/32"x23 mm, 1/4"x23 mm, 9/32"x23 mm, 5/16"x23 mm, 3/8"x23 mm, 7/16"x23 mm, 1/2"x23 mm 1x 8794 SA Zyklop extension with free-turning sleeve, short, 1/4": 1/4" x 75 mm 1x Hook and Loop Fastener Strip 240: 50 x 240 mm kts: torque wrench set 1/4" square 2-12 Nm in fabric case 10-piece kpn: Safe-Torque A 1 Imperial Set 1 kpn_dash: Safe kpn_clear: SafeTorqueA1ImperialSet1 bkpn: WERA Safe-Torque A 1 Imperial Set 1 bkpn_clear: WERA SafeTorqueA1ImperialSet1 c_path: Home / Tools / Hand tools / Torque tools / Sets / Torque wrench set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera torque tools / Wera sets / Wera torque wrench set sr_no_br_cl_ns: 05075831001 sr_ns: WERA05075831001
r: 03228368 p: 39.504 pid: 70342 b: WERA q: 0 st: lt: 12 ean: 4013288212764 sr: WERA 05020260001 sr_no_br: 05020260001 sr_no_br_cl: 05020260001 sr_cl: WERA05020260001 sr_dash: sold: 237.024 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1 20 mm Length 260,5 mm Non-sparking No VDE approved No With safety colour code 1000V Surface treatment Chrome plated Width across flats 2 22 mm Product Range Wera Joker n: WERA 6002 Joker Double double open-end spanner, 20 x 22 x 260.5 mm - 05020260001 cn: OPEN-ENDED SPANNER cn2: OPEN-ENDED SPANNER cn_clear: OPENENDEDSPANNER d: Product description High-quality, metric double spanner from Wera: Everything a wrench can do and so much more. Faster, better, more beautiful. A real Joker! The new generation of double open-ended spanners. For hexagon screw heads and bolts. With holding function by a metal plate in the open end, which reduces the risk of losing screws and sockets. With its extra hard teeth the exchangeable metal plate in the open end secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° avoids time-consuming rotating of the wrench whilst screwdriving. The special forge geometry allows a high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With tool finder Take it easy: colour coding by size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping The double-hex geometry reduces the risk of slipping Return angle of only 30° With Take it easy tool finder: colour coding by size Application Hexagon bolts and nuts Design Double open-end wrench Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. When we began to think about open-ended wrenches, we asked ourselves: why does the wrench always have to be flipped over; why does it have an offset design; why does it slip off injuring fingers? The new design of the open end resulted in a real "Joker" that works even when all other trumps have been played. The Joker double open-ended wrench is ideally suited for locking down nuts and bolts. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. Instead of 60°, the Joker only has a 30° back-pivoting angle thanks to its unique double-hex design. Along with the Joker's straight neck, this means that flipping the wrench has become a thing of the past. With the Joker, you can now loosen and tighten nuts and bolts, in situations where conventional tools fail. Particularly in confined spaces, where conventional open-jawed wrenches cannot be used. The combination of limit stop and small return angle enables eff ective work, even on screw pipe connections. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6002 Joker Double Open end wrenches, 20 x 22 x 260.5 mm kts: double open-end spanner, 20 x 22 x 260.5 mm kpn: 6002 Joker Double kpn_dash: kpn_clear: 6002JokerDouble bkpn: WERA 6002 Joker Double bkpn_clear: WERA 6002JokerDouble c_path: Home / Tools / Hand tools / Keys / Keys / Open-ended spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera open-ended spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020260001 sr_ns: WERA05020260001
r: 03229594 p: 9.876 pid: 70496 b: WERA q: 8 st: 1 lt: 1 ean: 4013288221209 sr: WERA 05042671001 sr_no_br: 05042671001 sr_no_br_cl: 05042671001 sr_cl: WERA05042671001 sr_dash: sold: 237.024 p_range: none type: standard act: 1 avo: 1 av: Connection size 1 1/2" Connection size 2 1/4" Connection type 1 (adapter) External square Connection type 2 (adapter) Internal square n: WERA 781 A/C adapter 36mm 1/4" inside square to 1/2" outside square - 05042671001 cn: REDUCER ADAPTER cn2: REDUCER ADAPTER cn_clear: REDUCERADAPTER d: Product description Connection part 1/4" square head socket to 1/2" external square head. For manual and machine-operated tools (non-impact), with ball stop groove to safely lock the socket, knurling at the rear end for manageability during manual use; chrome-vanadium, matte-chromed. 1/4" to 1/2" connection part With 1/4" square head socket drive 1/2" external square With secure socket fixing Made of chrome-vanadium for high load capacity Application For 3/8" and 1/2" square head socket wrench inserts with ball lock Design For manual and machine-operated tools (non-impact), with ball stop groove, knurling at the rear end for manageability during manual use; chrome-vanadium, brushed chrome-plated finish Drive 1/4" socket square head Features and benefits The connection parts are suitable for high loads thanks to their chrome-vanadium steel design. Knurling on lower end for more grip when used manually. ds: dsc: Scope of delivery 781 A 1/4" Connection parts, 781 A/C x 1/2 x 36 mm x 1/4" kts: adapter 36mm 1/4" inside square to 1/2" outside square kpn: 781 A/C kpn_dash: kpn_clear: 781AC bkpn: WERA 781 A/C bkpn_clear: WERA 781AC c_path: Home / Tools / Hand tools / Sockets and ratchets / Accessories and spare parts / Reducer adapter | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera sockets and ratchets / Wera accessories and spare parts / Wera reducer adapter sr_no_br_cl_ns: 05042671001 sr_ns: WERA05042671001
r: 02835781 p: 29.586 pid: 41702 b: WERA q: 0 st: lt: 11 ean: 4013288184207 sr: WERA 05022745001 sr_no_br: 05022745001 sr_no_br_cl: 05022745001 sr_cl: WERA05022745001 sr_dash: sold: 236.688 p_range: none type: standard act: 1 avo: 1 av: VDE approved Yes With safety colour code 1000V No Quantity per set 7 n: WERA 3165 i/6 Rack screwdriver set stainless steel + holder, 6-piece - 05022745001 cn: SCREWDRIVER SET cn2: SCREWDRIVER SET cn_clear: SCREWDRIVERSET d: Product description High quality Kraftform Plus VDE screwdriver set out of stainless steel by Wera. The stainless tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. They can be used for industrial application without hesitation. The individual testing of the Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000 volts. Secure working is also ensured under extreme conditions and verified with the proven cold impact resistance at -40° C. Mainly with Lasertip: the Lasertip tip literally bites into the screw head and prevents any slipping out of the screw recess. Multi-component Kraftform handle for fast and low-fatigue working. Take it easy Tool Finder: colour coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. Includes a practical rack for tidy storage of the screwdrivers. Insulated VDE stainless blades for secure work at 1,000 volts Multi-component Kraftform handle for high working speeds and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Conical blade, Lasertip tip, stainless to prevent extraneous rust Kraftform stainless: the safety screwdriver for stainless steel screws, Lasertip blade + rack. Take it easy tool finder: colour coding according to profile and size stamp. Application Slotted and Pozidriv screws Contents Stainless steel, 6-piece set and rack in display carton Features and benefits Why are stainless elements so often affected by rust? One reason: screwdriving jobs are often carried out with a tool out of made from conventional steel which can result in extraneous rust forming. This is annoying. We were confident that this could be prevented by using tools likewise out of stainless steel and meeting the required standard of industrial hardness. A tool series out of stainless steel. The forming of extraneous rust is prevented and a special vacuum ice-hardening process ensures the required degree of hardness - and they are even VDE-tested, too. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Solution to the rust problem: screwdriving stainless steel together with stainless steel! Wera stainless steel tools are manufactured out of stainless steel so unsightly rust can be avoided. The stainless steel tools from Wera are vacuum ice-hardened and have the hardness and strength needed for screw connections. There are no limitations to the industrial applications they are suitable for. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 3165 i/6 Screwdriver set, stainless and rack, 6 pieces 2x 3165 i PZ VDE Insulated screwdriver for Pozidriv screws, stainless: PZ 1x80 mm, PZ 2x100 mm 4x 3160 i VDE Insulated screwdriver for slotted screws, stainless: 0.5x3x80 mm, 0.6x3.5x100 mm, 0.8x4x100 mm, 1x5.5x125 mm kts: screwdriver set stainless steel + holder, 6-piece kpn: 3165 i/6 Rack kpn_dash: kpn_clear: 3165i6Rack bkpn: WERA 3165 i/6 Rack bkpn_clear: WERA 3165i6Rack c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera screwdriver set sr_no_br_cl_ns: 05022745001 sr_ns: WERA05022745001
r: 02059339 p: 11.83 pid: 42820 b: WERA q: 0 st: lt: 11 ean: 4013288031488 sr: WERA 05059453001 sr_no_br: 05059453001 sr_no_br_cl: 05059453001 sr_cl: WERA05059453001 sr_dash: sold: 236.6 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Blade thickness 1,2 mm Type of drive profile (bit) Slotted Connection size (bit) 1/4" VDE approved No Bit tip Slotted 6,5 mm Drive profile size (bit) 6,5 mm n: WERA 800/4 Z slotted screw bit, 1.2 x 6.5 x 152 mm - 05059453001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for slotted screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For slotted screws Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Slotted screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Tough, for universal use Features and benefits Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 800/4 Z bits, 1.2 x 6.5 x 152 mm kts: slotted screw bit, 1.2 x 6.5 x 152 mm kpn: 800/4 Z kpn_dash: kpn_clear: 8004Z bkpn: WERA 800/4 Z bkpn_clear: WERA 8004Z c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit sr_no_br_cl_ns: 05059453001 sr_ns: WERA05059453001
r: 02830525 p: 13.057 pid: 42411 b: WERA q: 0 st: lt: 11 ean: 4013288102645 sr: WERA 05006191001 sr_no_br: 05006191001 sr_no_br_cl: 05006191001 sr_cl: WERA05006191001 sr_dash: sold: 235.026 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ/S 2 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Pozidriv/Slotted n: WERA 165 i PZ/S VDE insulated screwdriver for PlusMinus screws, square 2 x 100 mm - 05006191001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera VDE screwdriver with multi-component Kraftform Plus handle for fast and smooth work: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Combination profile slotted and Pozidriv*, especially for use with terminal strips, fuse boxes, switches, relays. Individually tested at 10,000 V for safe working at the approved voltage of 1,000 V. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Insulated blades for secure work at 1,000 volts Smooth hard zones for high speed turning, soft grip zones for high torque transfer Handle markings simplify finding and sorting of tools Hexagonal anti-roll feature against rolling away Combination profile - Pozidriv/slotted Application For PlusMinus screws (Pozidriv/slotted) Blade Insulated, individually tested as per IEC 60900 Design PlusMinus (Pozidriv/slotted) Handle Kraftform with non-roll feature, multi-component Features and benefits The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. For the use in terminal blocks, control cabinets, switches, relays, sockets etc. The individual testing at 10,000 volts, in accordance with IEC 60900, ensures safe working with loads up to 1,000 volts. Impact strength tested at -40°C, guaranteeing safety even under extreme conditions. Wera produces the Kraftform handle out of several materials with different properties. A resistant plastic is used for the core which ensures that the blade is held securely even under high strain. A softer material is used for the coloured soft zones, which provides high frictional resistance and allows the transfer of high forces - resulting in less required screwdriving effort. The red sections with their hard surfaces prevent any "sticking" of the hand to the handle, making rapid repositioning of the hand possible. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The screw profile and tip size identification markings on the handle make it easier to find the right screwdriver in the tool case, or at the workplace. ds: dsc: Scope of delivery 165 i PZ/S VDE Insulated screwdriver for PlusMinus screws (Pozidriv/slotted), # 2 x 100 mm kts: insulated screwdriver for PlusMinus screws, square 2 x 100 mm kpn: 165 i PZ/S VDE kpn_dash: kpn_clear: 165iPZSVDE bkpn: WERA 165 i PZ/S VDE bkpn_clear: WERA 165iPZSVDE c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05006191001 sr_ns: WERA05006191001
r: 02057239 p: 8.099 pid: 44393 b: WERA q: 0 st: lt: 10 ean: 4013288122971 sr: WERA 05059635001 sr_no_br: 05059635001 sr_no_br_cl: 05059635001 sr_cl: WERA05059635001 sr_dash: sold: 234.871 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Length 152 mm Blade thickness Type of drive profile (bit) Hexagon Connection size (bit) 1/4" VDE approved No Bit tip HEX 5 mm Drive profile size (bit) 5 mm Product Range Wera Hex-Plus n: WERA 840/4 Z Hex-Plus hexagon bit, 5 x 152 mm - 05059635001 cn: BIT cn2: BIT cn_clear: BIT d: Product description Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers larger contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. For hexagonal socket head screws Hex-Plus allows socket head screws to live longer Tough for hard materials 1/4" hexagon drive (Wera connecting series 4) Application Hexagon socket screws Drive 1/4" hexagon, suitable for DIN ISO 1173-F 6.3 bit holders Design Hex-Plus, tough, for universal use Features and benefits Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Tough Wera bits prevent the tip from breaking prematurely. Z-bits usually are the bit for universal screwdriving applications. ds: dsc: Scope of delivery 840/4 Z bits, 5 x 152 mm kts: hexagon bit, 5 x 152 mm kpn: 840/4 Z Hex-Plus kpn_dash: 840/4 Z Hex kpn_clear: 8404ZHexPlus bkpn: WERA 840/4 Z Hex-Plus bkpn_clear: WERA 8404ZHexPlus c_path: Home / Tools / Hand tools / Screwdrivers and bits / Bits / Bit | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera bits / Wera bit | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05059635001 sr_ns: WERA05059635001
r: 02141364 p: 6.48 pid: 45741 b: WERA q: 3 st: 1 lt: 1 ean: 4013288031891 sr: WERA 05118006001 sr_no_br: 05118006001 sr_no_br_cl: 05118006001 sr_cl: WERA05118006001 sr_dash: sold: 233.28 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size Slotted 2 mm Blade length 60 mm Blade thickness 0,4 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wera Kraftform n: WERA 2035 Micro Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm - 05118006001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Wera Micro screwdriver for precision mechanical couplings. By supporting the hand on the rotating cap, and due to the fast rotating zone below the rotating cap, lightning fast turning is possible. Time-consuming hand switching is eliminated. The power zone with integrated soft zones ensures the transmission of high tightening and loosening moments. Precision zone for correct rotation angles whilst adjusting. The Wera Black Point tip offers fitting accuracy and optimised corrosion protection. Take it easy tool finder with size stamping and colour coding by profile for quick and easy identification of the required tool. Kraftform Micro screwdriver for slotted screws Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Anti-roll feature and rotating cap for rapid twisting The Wera Black Point tip offers an exact fit and optimum corrosion protection Take it easy tool finder: colour coding according to profile and size Application Slotted screws Blade Round Design Chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Multi-component screwdriver handle for ergonomic working. The Kraftform Micro, with its three zones and their specific arrangement, satisfies these requirements perfectly. The free-turning cap that provides support for the hand works with these advantages, enabling quick and easy precision work. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allows rapid spinning. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. Indispensable for many users, including electronics technicians, opticians, precision engineers, jewellers, EDP hardware fitters and model-makers ds: dsc: Scope of delivery 2035 Screwdriver for slotted screws for electronic applications, 0.40 x 2 x 60 mm kts: Kraftform saw cut screwdriver, 0.40 x 2 x 60 mm kpn: 2035 Micro kpn_dash: kpn_clear: 2035Micro bkpn: WERA 2035 Micro bkpn_clear: WERA 2035Micro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05118006001 sr_ns: WERA05118006001
r: 02832886 p: 15.537 pid: 41822 b: WERA q: 0 st: lt: 12 ean: 4013288111937 sr: WERA 05021909001 sr_no_br: 05021909001 sr_no_br_cl: 05021909001 sr_cl: WERA05021909001 sr_dash: sold: 233.055 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Min. width across flats 1,5 mm With ball head Yes Quantity per set 9 Product Range Wera Hex-Plus n: WERA 950/9 Hex-Plus 2 socket wrench set metric chrome plated 9-piece - 05021909001 cn: HEX KEY SET cn2: HEX KEY SET cn_clear: HEXKEYSET d: Product description High quality L-key set for hexagonal socket screws. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The precise chrome-plated design ensures high corrosion protection; with extra-long arm. L-keys for hexagonal socket screws Hex-Plus allows socket head screws to live longer High corrosion protection thanks to chrome-plating L-keys are quickly to hand thanks to their size markings Wear-resistant clip material for enhanced durability 9-piece set in a two-component clip Application Hexagon socket screws Design Chrome-plated Tip Hex-Plus Features and benefits We questioned the classic L-key design, since all too often the screw head recess is rounded out, meaning screws can no longer be tightened or loosened - and so the user finds the L-key slipping out of the recess. Wera Hex-Plus tools have a larger contact surface in the screw head. The notching effects are reduced and thereby the deformation of the screws. At the same time, as much as 20 % more torque can be applied. Hexagon screws can endure a problem because the contact surfaces delivering the power from the conventional tool, is transferred to the screw via very small surface areas. The consequence: the screw can become damaged (rounding out). Hex-Plus tools have a greater contact surface that prevents this from happening! At the same time, as much as 20 % more torque can be applied. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! The size of each L-keys has been engraved by a laser. In addition Take it easy L-keys have a colour coding according to sizes - for simple and rapid accessing of the required tool. Making it easy to find the right tool. Chrome-plated hexagon L-keys for outstanding surface protection and long service life. High corrosion protection. The wear-resistant clip material ensures that the L-keys are securely held yet are easy to remove. ds: dsc: Scope of delivery 950/9 Hex-Plus 2 L-key set, metric, chrome-plated, 9 pieces 9x 950 L L-key, metric, chrome-plated: 1.5x90 mm, 2x100 mm, 2.5x112 mm, 3x126 mm, 4x140 mm, 5x160 mm, 6x180 mm, 8x200 mm, 10x219 mm kts: socket wrench set metric chrome plated 9-piece kpn: 950/9 Hex-Plus 2 kpn_dash: 950/9 Hex kpn_clear: 9509HexPlus2 bkpn: WERA 950/9 Hex-Plus 2 bkpn_clear: WERA 9509HexPlus2 c_path: Home / Tools / Hand tools / Keys / Sets / Hex key set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera sets / Wera hex key set | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05021909001 sr_ns: WERA05021909001
r: 08085383 p: 77.52 pid: 71208 b: WERA q: 0 st: lt: 8 ean: 4013288221841 sr: WERA 05004282001 sr_no_br: 05004282001 sr_no_br_cl: 05004282001 sr_cl: WERA05004282001 sr_dash: sold: 232.56 p_range: KLIUM_PRODUCT_RANGE_313 type: standard act: 1 avo: 1 av: Bit holder size 1/4 inch Bit holder type Internal hexagon; External square VDE approved No With safety colour code 1000V ESD No Product Range Wera Zyklop n: WERA 8009 Zyklop Pocket Set Imperial 1 ratchet with integrated bit magazine 13-piece - 05004282001 cn: BIT SCREWDRIVER SET cn2: BIT SCREWDRIVER SET cn_clear: BITSCREWDRIVERSET d: Product description Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for 1/4" bits and 3/8" sockets. Rapid tool change thanks to the non-locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting simultaneously turns the 3/8" ratchet into a bit ratchet screwdriver with 1/4" bit mounting Freely pivoting ratchet head with 5 predefined locking positions Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5° Captive and freely swivelling bit magazine for easy removal and secure storage of the bits 13-piece set; 1 Zyklop Pocket 8009 for 3/8" sockets as well as 3/8" connectors with square head drive; also suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. 3/8" ratchet and 1/4" bit ratchet screwdriver; freely swivelling ratchet head; pre-defined positions at 0°, 15° and 90° to the left and right; can be used as a conventional screwdriver in the 0° position; clockwise/counterclockwise switching, fine-toothed, small return angle of 5°; magnetic direct mounting. Multi-component Kraftform handle for fatigue-free working; captive, freely swivelling magazine with 12 bits integrated in the handle, 1/4", 25 mm length. Features and benefits Compact Zyklop ratchet with integrated bit magazine The magnetic direct mounting is suitable for 3/8" sockets as well as 1/4" bits without the need for an adapter. A captive, freely swivelling bit magazine for 12 bits (1/4", 25 mm length) is integrated in the handle of the compact Zyklop ratchet. The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored. The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head. Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left. The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations. The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/anti-clockwise rotation in any position using the knurl. ds: dsc: Scope of delivery 8009 Zyklop Pocket Imperial Set 1, 13 pieces 1x 8009 Zyklop Pocket: 3/8" x 1/4" x 133 mm 2x 851/1 BTZ bits: PH 1x25 mm, PH 2x25 mm 4x 867/1 BTZ TORX® bits: TX 10x25 mm, TX 15x25 mm, TX 20x25 mm, TX 25x25 mm 4x 840/1 Z bits: 1/8"x25 mm, 5/32"x25 mm, 3/16"x25 mm, 1/4"x25 mm 2x 868/1 Z Square-Plus bits: # 1x25 mm, # 2x25 mm kts: ratchet with integrated bit magazine 13-piece kpn: 8009 Zyklop Pocket Set Imperial 1 kpn_dash: kpn_clear: 8009ZyklopPocketSetImperial1 bkpn: WERA 8009 Zyklop Pocket Set Imperial 1 bkpn_clear: WERA 8009ZyklopPocketSetImperial1 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Sets / Bit screwdriver set | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera sets / Wera bit screwdriver set | Home / Our brands / Wera / Wera Ranges / Wera zyklop sr_no_br_cl_ns: 05004282001 sr_ns: WERA05004282001
